1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Bit definitions for the MCF54xx ACR and CACR registers. 4 */ 5 6 #ifndef m54xxacr_h 7 #define m54xxacr_h 8 9 /* 10 * Define the Cache register flags. 11 */ 12 #define CACR_DEC 0x80000000 /* Enable data cache */ 13 #define CACR_DWP 0x40000000 /* Data write protection */ 14 #define CACR_DESB 0x20000000 /* Enable data store buffer */ 15 #define CACR_DDPI 0x10000000 /* Disable invalidation by CPUSHL */ 16 #define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ 17 #define CACR_DDCM_WT 0x00000000 /* Write through cache*/ 18 #define CACR_DDCM_CP 0x02000000 /* Copyback cache */ 19 #define CACR_DDCM_P 0x04000000 /* No cache, precise */ 20 #define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ 21 #define CACR_DCINVA 0x01000000 /* Invalidate data cache */ 22 #define CACR_BEC 0x00080000 /* Enable branch cache */ 23 #define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ 24 #define CACR_IEC 0x00008000 /* Enable instruction cache */ 25 #define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ 26 #define CACR_IDPI 0x00001000 /* Disable CPUSHL */ 27 #define CACR_IHLCK 0x00000800 /* Instruction cache half lock */ 28 #define CACR_IDCM 0x00000400 /* Instruction cache inhibit */ 29 #define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ 30 #define CACR_EUSP 0x00000020 /* Enable separate user a7 */ 31 32 #define ACR_BASE_POS 24 /* Address Base */ 33 #define ACR_MASK_POS 16 /* Address Mask */ 34 #define ACR_ENABLE 0x00008000 /* Enable address */ 35 #define ACR_USER 0x00000000 /* User mode access only */ 36 #define ACR_SUPER 0x00002000 /* Supervisor mode only */ 37 #define ACR_ANY 0x00004000 /* Match any access mode */ 38 #define ACR_CM_WT 0x00000000 /* Write through mode */ 39 #define ACR_CM_CP 0x00000020 /* Copyback mode */ 40 #define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ 41 #define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ 42 #define ACR_CM 0x00000060 /* Cache mode mask */ 43 #define ACR_SP 0x00000008 /* Supervisor protect */ 44 #define ACR_WPROTECT 0x00000004 /* Write protect */ 45 46 #define ACR_BA(x) ((x) & 0xff000000) 47 #define ACR_ADMSK(x) ((((x) - 1) & 0xff000000) >> 8) 48 49 #if defined(CONFIG_M5407) 50 51 #define ICACHE_SIZE 0x4000 /* instruction - 16k */ 52 #define DCACHE_SIZE 0x2000 /* data - 8k */ 53 54 #elif defined(CONFIG_M54xx) 55 56 #define ICACHE_SIZE 0x8000 /* instruction - 32k */ 57 #define DCACHE_SIZE 0x8000 /* data - 32k */ 58 59 #elif defined(CONFIG_M5441x) 60 61 #define ICACHE_SIZE 0x2000 /* instruction - 8k */ 62 #define DCACHE_SIZE 0x2000 /* data - 8k */ 63 #endif 64 65 #define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ 66 #define CACHE_WAYS 4 /* 4 ways */ 67 68 #define ICACHE_SET_MASK ((ICACHE_SIZE / 64 - 1) << CACHE_WAYS) 69 #define DCACHE_SET_MASK ((DCACHE_SIZE / 64 - 1) << CACHE_WAYS) 70 #define ICACHE_MAX_ADDR ICACHE_SET_MASK 71 #define DCACHE_MAX_ADDR DCACHE_SET_MASK 72 73 /* 74 * Version 4 cores have a true harvard style separate instruction 75 * and data cache. Enable data and instruction caches, also enable write 76 * buffers and branch accelerator. 77 */ 78 /* attention : enabling CACR_DESB requires a "nop" to flush the store buffer */ 79 /* use '+' instead of '|' for assembler's sake */ 80 81 /* Enable data cache */ 82 /* Enable data store buffer */ 83 /* outside ACRs : No cache, precise */ 84 /* Enable instruction+branch caches */ 85 #if defined(CONFIG_M5407) 86 #define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC) 87 #else 88 #define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP) 89 #endif 90 #define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA) 91 92 #if defined(CONFIG_MMU) 93 /* 94 * If running with the MMU enabled then we need to map the internal 95 * register region as non-cacheable. And then we map all our RAM as 96 * cacheable and supervisor access only. 97 */ 98 #define ACR0_MODE (ACR_BA(IOMEMBASE)+ACR_ADMSK(IOMEMSIZE)+ \ 99 ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP) 100 #if defined(CONFIG_CACHE_COPYBACK) 101 #define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ 102 ACR_ENABLE+ACR_SUPER+ACR_SP+ACR_CM_CP) 103 #else 104 #define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ 105 ACR_ENABLE+ACR_SUPER+ACR_SP+ACR_CM_WT) 106 #endif 107 #define ACR2_MODE 0 108 #define ACR3_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ 109 ACR_ENABLE+ACR_SUPER+ACR_SP) 110 111 #else 112 113 /* 114 * For the non-MMU enabled case we map all of RAM as cacheable. 115 */ 116 #if defined(CONFIG_CACHE_COPYBACK) 117 #define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP) 118 #else 119 #define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_WT) 120 #endif 121 #define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY) 122 123 #define CACHE_INVALIDATE (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA) 124 #define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA) 125 #define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA) 126 #define ACR0_MODE (0x000f0000+DATA_CACHE_MODE) 127 #define ACR1_MODE 0 128 #define ACR2_MODE (0x000f0000+INSN_CACHE_MODE) 129 #define ACR3_MODE 0 130 131 #if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_CP) 132 /* Copyback cache mode must push dirty cache lines first */ 133 #define CACHE_PUSH 134 #endif 135 136 #endif /* CONFIG_MMU */ 137 #endif /* m54xxacr_h */ 138