1 /****************************************************************************/ 2 3 /* 4 * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. 5 * 6 * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) 7 */ 8 9 /****************************************************************************/ 10 #ifndef m527xsim_h 11 #define m527xsim_h 12 /****************************************************************************/ 13 14 15 /* 16 * Define the 5270/5271 SIM register set addresses. 17 */ 18 #define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ 19 #define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ 20 #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ 21 #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ 22 #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ 23 #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ 24 #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ 25 #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ 26 #define MCFINTC_IRLR 0x18 /* */ 27 #define MCFINTC_IACKL 0x19 /* */ 28 #define MCFINTC_ICR0 0x40 /* Base ICR register */ 29 30 #define MCFINT_VECBASE 64 /* Vector base number */ 31 #define MCFINT_UART0 13 /* Interrupt number for UART0 */ 32 #define MCFINT_UART1 14 /* Interrupt number for UART1 */ 33 #define MCFINT_UART2 15 /* Interrupt number for UART2 */ 34 #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ 35 36 /* 37 * SDRAM configuration registers. 38 */ 39 #ifdef CONFIG_M5271 40 #define MCFSIM_DCR 0x40 /* SDRAM control */ 41 #define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ 42 #define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ 43 #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ 44 #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ 45 #endif 46 #ifdef CONFIG_M5275 47 #define MCFSIM_DMR 0x40 /* SDRAM mode */ 48 #define MCFSIM_DCR 0x44 /* SDRAM control */ 49 #define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ 50 #define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ 51 #define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ 52 #define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ 53 #define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ 54 #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ 55 #endif 56 57 /* 58 * GPIO pins setups to enable the UARTs. 59 */ 60 #ifdef CONFIG_M5271 61 #define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ 62 #define UART0_ENABLE_MASK 0x000f 63 #define UART1_ENABLE_MASK 0x0ff0 64 #define UART2_ENABLE_MASK 0x3000 65 #endif 66 #ifdef CONFIG_M5275 67 #define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ 68 #define UART0_ENABLE_MASK 0x000f 69 #define UART1_ENABLE_MASK 0x00f0 70 #define UART2_ENABLE_MASK 0x3f00 71 #endif 72 73 /****************************************************************************/ 74 #endif /* m527xsim_h */ 75