1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _M68KNOMMU_IO_H 3 #define _M68KNOMMU_IO_H 4 5 /* 6 * Convert a physical memory address into a IO memory address. 7 * For us this is trivially a type cast. 8 */ 9 #define iomem(a) ((void __iomem *) (a)) 10 11 /* 12 * The non-MMU m68k and ColdFire IO and memory mapped hardware access 13 * functions have always worked in CPU native endian. We need to define 14 * that behavior here first before we include asm-generic/io.h. 15 */ 16 #define __raw_readb(addr) \ 17 ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) 18 #define __raw_readw(addr) \ 19 ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) 20 #define __raw_readl(addr) \ 21 ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) 22 23 #define __raw_writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b)) 24 #define __raw_writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) 25 #define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) 26 27 #if defined(CONFIG_COLDFIRE) 28 /* 29 * For ColdFire platforms we may need to do some extra checks for what 30 * type of address range we are accessing. Include the ColdFire platform 31 * definitions so we can figure out if need to do something special. 32 */ 33 #include <asm/byteorder.h> 34 #include <asm/coldfire.h> 35 #include <asm/mcfsim.h> 36 #endif /* CONFIG_COLDFIRE */ 37 38 #if defined(IOMEMBASE) 39 /* 40 * The ColdFire SoC internal peripherals are mapped into virtual address 41 * space using the ACR registers of the cache control unit. This means we 42 * are using a 1:1 physical:virtual mapping for them. We can quickly 43 * determine if we are accessing an internal peripheral device given the 44 * physical or vitrual address using the same range check. This check logic 45 * applies just the same of there is no MMU but something like a PCI bus 46 * is present. 47 */ 48 static int __cf_internalio(unsigned long addr) 49 { 50 return (addr >= IOMEMBASE) && (addr <= IOMEMBASE + IOMEMSIZE - 1); 51 } 52 53 static int cf_internalio(const volatile void __iomem *addr) 54 { 55 return __cf_internalio((unsigned long) addr); 56 } 57 58 /* 59 * We need to treat built-in peripherals and bus based address ranges 60 * differently. Local built-in peripherals (and the ColdFire SoC parts 61 * have quite a lot of them) are always native endian - which is big 62 * endian on m68k/ColdFire. Bus based address ranges, like the PCI bus, 63 * are accessed little endian - so we need to byte swap those. 64 */ 65 #define readw readw 66 static inline u16 readw(const volatile void __iomem *addr) 67 { 68 if (cf_internalio(addr)) 69 return __raw_readw(addr); 70 return __le16_to_cpu(__raw_readw(addr)); 71 } 72 73 #define readl readl 74 static inline u32 readl(const volatile void __iomem *addr) 75 { 76 if (cf_internalio(addr)) 77 return __raw_readl(addr); 78 return __le32_to_cpu(__raw_readl(addr)); 79 } 80 81 #define writew writew 82 static inline void writew(u16 value, volatile void __iomem *addr) 83 { 84 if (cf_internalio(addr)) 85 __raw_writew(value, addr); 86 else 87 __raw_writew(__cpu_to_le16(value), addr); 88 } 89 90 #define writel writel 91 static inline void writel(u32 value, volatile void __iomem *addr) 92 { 93 if (cf_internalio(addr)) 94 __raw_writel(value, addr); 95 else 96 __raw_writel(__cpu_to_le32(value), addr); 97 } 98 99 #else 100 101 #define readb __raw_readb 102 #define readw __raw_readw 103 #define readl __raw_readl 104 #define writeb __raw_writeb 105 #define writew __raw_writew 106 #define writel __raw_writel 107 108 #endif /* IOMEMBASE */ 109 110 #if defined(CONFIG_PCI) 111 /* 112 * Support for PCI bus access uses the asm-generic access functions. 113 * We need to supply the base address and masks for the normal memory 114 * and IO address space mappings. 115 */ 116 #define PCI_MEM_PA 0xf0000000 /* Host physical address */ 117 #define PCI_MEM_BA 0xf0000000 /* Bus physical address */ 118 #define PCI_MEM_SIZE 0x08000000 /* 128 MB */ 119 #define PCI_MEM_MASK (PCI_MEM_SIZE - 1) 120 121 #define PCI_IO_PA 0xf8000000 /* Host physical address */ 122 #define PCI_IO_BA 0x00000000 /* Bus physical address */ 123 #define PCI_IO_SIZE 0x00010000 /* 64k */ 124 #define PCI_IO_MASK (PCI_IO_SIZE - 1) 125 126 #define HAVE_ARCH_PIO_SIZE 127 #define PIO_OFFSET 0 128 #define PIO_MASK 0xffff 129 #define PIO_RESERVED 0x10000 130 #define PCI_IOBASE ((void __iomem *) PCI_IO_PA) 131 #define PCI_SPACE_LIMIT PCI_IO_MASK 132 #endif /* CONFIG_PCI */ 133 134 #include <asm/kmap.h> 135 #include <asm/virtconvert.h> 136 137 #endif /* _M68KNOMMU_IO_H */ 138