1| 2| x_ovfl.sa 3.5 7/1/91 3| 4| fpsp_ovfl --- FPSP handler for overflow exception 5| 6| Overflow occurs when a floating-point intermediate result is 7| too large to be represented in a floating-point data register, 8| or when storing to memory, the contents of a floating-point 9| data register are too large to be represented in the 10| destination format. 11| 12| Trap disabled results 13| 14| If the instruction is move_out, then garbage is stored in the 15| destination. If the instruction is not move_out, then the 16| destination is not affected. For 68881 compatibility, the 17| following values should be stored at the destination, based 18| on the current rounding mode: 19| 20| RN Infinity with the sign of the intermediate result. 21| RZ Largest magnitude number, with the sign of the 22| intermediate result. 23| RM For pos overflow, the largest pos number. For neg overflow, 24| -infinity 25| RP For pos overflow, +infinity. For neg overflow, the largest 26| neg number 27| 28| Trap enabled results 29| All trap disabled code applies. In addition the exceptional 30| operand needs to be made available to the users exception handler 31| with a bias of $6000 subtracted from the exponent. 32| 33| 34 35| Copyright (C) Motorola, Inc. 1990 36| All Rights Reserved 37| 38| For details on the license for this file, please see the 39| file, README, in this same directory. 40 41X_OVFL: |idnt 2,1 | Motorola 040 Floating Point Software Package 42 43 |section 8 44 45#include "fpsp.h" 46 47 |xref ovf_r_x2 48 |xref ovf_r_x3 49 |xref store 50 |xref real_ovfl 51 |xref real_inex 52 |xref fpsp_done 53 |xref g_opcls 54 |xref b1238_fix 55 56 .global fpsp_ovfl 57fpsp_ovfl: 58 link %a6,#-LOCAL_SIZE 59 fsave -(%a7) 60 moveml %d0-%d1/%a0-%a1,USER_DA(%a6) 61 fmovemx %fp0-%fp3,USER_FP0(%a6) 62 fmoveml %fpcr/%fpsr/%fpiar,USER_FPCR(%a6) 63 64| 65| The 040 doesn't set the AINEX bit in the FPSR, the following 66| line temporarily rectifies this error. 67| 68 bsetb #ainex_bit,FPSR_AEXCEPT(%a6) 69| 70 bsrl ovf_adj |denormalize, round & store interm op 71| 72| if overflow traps not enabled check for inexact exception 73| 74 btstb #ovfl_bit,FPCR_ENABLE(%a6) 75 beqs ck_inex 76| 77 btstb #E3,E_BYTE(%a6) 78 beqs no_e3_1 79 bfextu CMDREG3B(%a6){#6:#3},%d0 |get dest reg no 80 bclrb %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit 81 bsrl b1238_fix 82 movel USER_FPSR(%a6),FPSR_SHADOW(%a6) 83 orl #sx_mask,E_BYTE(%a6) 84no_e3_1: 85 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 86 fmovemx USER_FP0(%a6),%fp0-%fp3 87 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 88 frestore (%a7)+ 89 unlk %a6 90 bral real_ovfl 91| 92| It is possible to have either inex2 or inex1 exceptions with the 93| ovfl. If the inex enable bit is set in the FPCR, and either 94| inex2 or inex1 occurred, we must clean up and branch to the 95| real inex handler. 96| 97ck_inex: 98| move.b FPCR_ENABLE(%a6),%d0 99| and.b FPSR_EXCEPT(%a6),%d0 100| andi.b #$3,%d0 101 btstb #inex2_bit,FPCR_ENABLE(%a6) 102 beqs ovfl_exit 103| 104| Inexact enabled and reported, and we must take an inexact exception. 105| 106take_inex: 107 btstb #E3,E_BYTE(%a6) 108 beqs no_e3_2 109 bfextu CMDREG3B(%a6){#6:#3},%d0 |get dest reg no 110 bclrb %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit 111 bsrl b1238_fix 112 movel USER_FPSR(%a6),FPSR_SHADOW(%a6) 113 orl #sx_mask,E_BYTE(%a6) 114no_e3_2: 115 moveb #INEX_VEC,EXC_VEC+1(%a6) 116 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 117 fmovemx USER_FP0(%a6),%fp0-%fp3 118 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 119 frestore (%a7)+ 120 unlk %a6 121 bral real_inex 122 123ovfl_exit: 124 bclrb #E3,E_BYTE(%a6) |test and clear E3 bit 125 beqs e1_set 126| 127| Clear dirty bit on dest resister in the frame before branching 128| to b1238_fix. 129| 130 bfextu CMDREG3B(%a6){#6:#3},%d0 |get dest reg no 131 bclrb %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit 132 bsrl b1238_fix |test for bug1238 case 133 134 movel USER_FPSR(%a6),FPSR_SHADOW(%a6) 135 orl #sx_mask,E_BYTE(%a6) 136 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 137 fmovemx USER_FP0(%a6),%fp0-%fp3 138 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 139 frestore (%a7)+ 140 unlk %a6 141 bral fpsp_done 142e1_set: 143 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 144 fmovemx USER_FP0(%a6),%fp0-%fp3 145 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 146 unlk %a6 147 bral fpsp_done 148 149| 150| ovf_adj 151| 152ovf_adj: 153| 154| Have a0 point to the correct operand. 155| 156 btstb #E3,E_BYTE(%a6) |test E3 bit 157 beqs ovf_e1 158 159 lea WBTEMP(%a6),%a0 160 bras ovf_com 161ovf_e1: 162 lea ETEMP(%a6),%a0 163 164ovf_com: 165 bclrb #sign_bit,LOCAL_EX(%a0) 166 sne LOCAL_SGN(%a0) 167 168 bsrl g_opcls |returns opclass in d0 169 cmpiw #3,%d0 |check for opclass3 170 bnes not_opc011 171 172| 173| FPSR_CC is saved and restored because ovf_r_x3 affects it. The 174| CCs are defined to be 'not affected' for the opclass3 instruction. 175| 176 moveb FPSR_CC(%a6),L_SCR1(%a6) 177 bsrl ovf_r_x3 |returns a0 pointing to result 178 moveb L_SCR1(%a6),FPSR_CC(%a6) 179 bral store |stores to memory or register 180 181not_opc011: 182 bsrl ovf_r_x2 |returns a0 pointing to result 183 bral store |stores to memory or register 184 185 |end 186