1 // SPDX-License-Identifier: GPL-2.0 2 /***************************************************************************/ 3 4 /* 5 * m5272.c -- platform support for ColdFire 5272 based boards 6 * 7 * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) 8 * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com) 9 */ 10 11 /***************************************************************************/ 12 13 #include <linux/kernel.h> 14 #include <linux/param.h> 15 #include <linux/init.h> 16 #include <linux/io.h> 17 #include <linux/phy.h> 18 #include <linux/phy_fixed.h> 19 #include <asm/machdep.h> 20 #include <asm/coldfire.h> 21 #include <asm/mcfsim.h> 22 #include <asm/mcfuart.h> 23 #include <asm/mcfclk.h> 24 25 /***************************************************************************/ 26 27 /* 28 * Some platforms need software versions of the GPIO data registers. 29 */ 30 unsigned short ppdata; 31 unsigned char ledbank = 0xff; 32 33 /***************************************************************************/ 34 35 DEFINE_CLK(pll, "pll.0", MCF_CLK); 36 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); 37 DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK); 38 DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK); 39 DEFINE_CLK(mcftmr2, "mcftmr.2", MCF_BUSCLK); 40 DEFINE_CLK(mcftmr3, "mcftmr.3", MCF_BUSCLK); 41 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); 42 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); 43 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); 44 DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); 45 46 struct clk *mcf_clks[] = { 47 &clk_pll, 48 &clk_sys, 49 &clk_mcftmr0, 50 &clk_mcftmr1, 51 &clk_mcftmr2, 52 &clk_mcftmr3, 53 &clk_mcfuart0, 54 &clk_mcfuart1, 55 &clk_mcfqspi0, 56 &clk_fec0, 57 NULL 58 }; 59 60 /***************************************************************************/ 61 62 static void __init m5272_uarts_init(void) 63 { 64 u32 v; 65 66 /* Enable the output lines for the serial ports */ 67 v = readl(MCFSIM_PBCNT); 68 v = (v & ~0x000000ff) | 0x00000055; 69 writel(v, MCFSIM_PBCNT); 70 71 v = readl(MCFSIM_PDCNT); 72 v = (v & ~0x000003fc) | 0x000002a8; 73 writel(v, MCFSIM_PDCNT); 74 } 75 76 /***************************************************************************/ 77 78 static void m5272_cpu_reset(void) 79 { 80 local_irq_disable(); 81 /* Set watchdog to reset, and enabled */ 82 __raw_writew(0, MCFSIM_WIRR); 83 __raw_writew(1, MCFSIM_WRRR); 84 __raw_writew(0, MCFSIM_WCR); 85 for (;;) 86 /* wait for watchdog to timeout */; 87 } 88 89 /***************************************************************************/ 90 91 void __init config_BSP(char *commandp, int size) 92 { 93 #if defined (CONFIG_MOD5272) 94 /* Set base of device vectors to be 64 */ 95 writeb(0x40, MCFSIM_PIVR); 96 #endif 97 98 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES) 99 /* Copy command line from FLASH to local buffer... */ 100 memcpy(commandp, (char *) 0xf0004000, size); 101 commandp[size-1] = 0; 102 #elif defined(CONFIG_CANCam) 103 /* Copy command line from FLASH to local buffer... */ 104 memcpy(commandp, (char *) 0xf0010000, size); 105 commandp[size-1] = 0; 106 #endif 107 108 mach_reset = m5272_cpu_reset; 109 mach_sched_init = hw_timer_init; 110 } 111 112 /***************************************************************************/ 113 114 /* 115 * Some 5272 based boards have the FEC ethernet directly connected to 116 * an ethernet switch. In this case we need to use the fixed phy type, 117 * and we need to declare it early in boot. 118 */ 119 static struct fixed_phy_status nettel_fixed_phy_status __initdata = { 120 .link = 1, 121 .speed = 100, 122 .duplex = 0, 123 }; 124 125 /***************************************************************************/ 126 127 static int __init init_BSP(void) 128 { 129 m5272_uarts_init(); 130 fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status, -1); 131 return 0; 132 } 133 134 arch_initcall(init_BSP); 135 136 /***************************************************************************/ 137