xref: /openbmc/linux/arch/m68k/coldfire/m5249.c (revision b78412b8)
1 /***************************************************************************/
2 
3 /*
4  *	m5249.c  -- platform support for ColdFire 5249 based boards
5  *
6  *	Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
7  */
8 
9 /***************************************************************************/
10 
11 #include <linux/kernel.h>
12 #include <linux/param.h>
13 #include <linux/init.h>
14 #include <linux/io.h>
15 #include <linux/platform_device.h>
16 #include <asm/machdep.h>
17 #include <asm/coldfire.h>
18 #include <asm/mcfsim.h>
19 #include <asm/mcfclk.h>
20 
21 /***************************************************************************/
22 
23 DEFINE_CLK(pll, "pll.0", MCF_CLK);
24 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
25 DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
26 DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
27 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
28 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
29 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
30 DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
31 DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
32 
33 struct clk *mcf_clks[] = {
34 	&clk_pll,
35 	&clk_sys,
36 	&clk_mcftmr0,
37 	&clk_mcftmr1,
38 	&clk_mcfuart0,
39 	&clk_mcfuart1,
40 	&clk_mcfqspi0,
41 	&clk_mcfi2c0,
42 	&clk_mcfi2c1,
43 	NULL
44 };
45 
46 /***************************************************************************/
47 
48 #ifdef CONFIG_M5249C3
49 
50 static struct resource m5249_smc91x_resources[] = {
51 	{
52 		.start		= 0xe0000300,
53 		.end		= 0xe0000300 + 0x100,
54 		.flags		= IORESOURCE_MEM,
55 	},
56 	{
57 		.start		= MCF_IRQ_GPIO6,
58 		.end		= MCF_IRQ_GPIO6,
59 		.flags		= IORESOURCE_IRQ,
60 	},
61 };
62 
63 static struct platform_device m5249_smc91x = {
64 	.name			= "smc91x",
65 	.id			= 0,
66 	.num_resources		= ARRAY_SIZE(m5249_smc91x_resources),
67 	.resource		= m5249_smc91x_resources,
68 };
69 
70 #endif /* CONFIG_M5249C3 */
71 
72 static struct platform_device *m5249_devices[] __initdata = {
73 #ifdef CONFIG_M5249C3
74 	&m5249_smc91x,
75 #endif
76 };
77 
78 /***************************************************************************/
79 
80 static void __init m5249_qspi_init(void)
81 {
82 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
83 	/* QSPI irq setup */
84 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
85 	       MCFSIM_QSPIICR);
86 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
87 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
88 }
89 
90 /***************************************************************************/
91 
92 static void __init m5249_i2c_init(void)
93 {
94 #if IS_ENABLED(CONFIG_I2C_IMX)
95 	u32 r;
96 
97 	/* first I2C controller uses regular irq setup */
98 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
99 	       MCFSIM_I2CICR);
100 	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
101 
102 	/* second I2C controller is completely different */
103 	r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
104 	r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
105 	r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
106 	writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
107 #endif /* CONFIG_I2C_IMX */
108 }
109 
110 /***************************************************************************/
111 
112 #ifdef CONFIG_M5249C3
113 
114 static void __init m5249_smc91x_init(void)
115 {
116 	u32  gpio;
117 
118 	/* Set the GPIO line as interrupt source for smc91x device */
119 	gpio = readl(MCFSIM2_GPIOINTENABLE);
120 	writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
121 
122 	gpio = readl(MCFINTC2_INTPRI5);
123 	writel(gpio | 0x04000000, MCFINTC2_INTPRI5);
124 }
125 
126 #endif /* CONFIG_M5249C3 */
127 
128 /***************************************************************************/
129 
130 void __init config_BSP(char *commandp, int size)
131 {
132 	mach_sched_init = hw_timer_init;
133 
134 #ifdef CONFIG_M5249C3
135 	m5249_smc91x_init();
136 #endif
137 	m5249_qspi_init();
138 	m5249_i2c_init();
139 }
140 
141 /***************************************************************************/
142 
143 static int __init init_BSP(void)
144 {
145 	platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
146 	return 0;
147 }
148 
149 arch_initcall(init_BSP);
150 
151 /***************************************************************************/
152