1 // SPDX-License-Identifier: GPL-2.0 2 /***************************************************************************/ 3 4 /* 5 * m520x.c -- platform support for ColdFire 520x based boards 6 * 7 * Copyright (C) 2005, Freescale (www.freescale.com) 8 * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) 9 * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) 10 * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) 11 */ 12 13 /***************************************************************************/ 14 15 #include <linux/clkdev.h> 16 #include <linux/kernel.h> 17 #include <linux/param.h> 18 #include <linux/init.h> 19 #include <linux/io.h> 20 #include <asm/machdep.h> 21 #include <asm/coldfire.h> 22 #include <asm/mcfsim.h> 23 #include <asm/mcfuart.h> 24 #include <asm/mcfclk.h> 25 26 /***************************************************************************/ 27 28 DEFINE_CLK(0, "flexbus", 2, MCF_CLK); 29 DEFINE_CLK(0, "fec.0", 12, MCF_CLK); 30 DEFINE_CLK(0, "edma", 17, MCF_CLK); 31 DEFINE_CLK(0, "intc.0", 18, MCF_CLK); 32 DEFINE_CLK(0, "iack.0", 21, MCF_CLK); 33 DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK); 34 DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK); 35 DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK); 36 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK); 37 DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK); 38 DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK); 39 DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK); 40 DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK); 41 DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK); 42 43 DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK); 44 DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK); 45 DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK); 46 DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK); 47 DEFINE_CLK(0, "pll.0", 36, MCF_CLK); 48 DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK); 49 DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK); 50 DEFINE_CLK(0, "sdram.0", 42, MCF_CLK); 51 52 static struct clk_lookup m520x_clk_lookup[] = { 53 CLKDEV_INIT(NULL, "flexbus", &__clk_0_2), 54 CLKDEV_INIT("fec.0", NULL, &__clk_0_12), 55 CLKDEV_INIT("edma", NULL, &__clk_0_17), 56 CLKDEV_INIT("intc.0", NULL, &__clk_0_18), 57 CLKDEV_INIT("iack.0", NULL, &__clk_0_21), 58 CLKDEV_INIT("imx1-i2c.0", NULL, &__clk_0_22), 59 CLKDEV_INIT("mcfqspi.0", NULL, &__clk_0_23), 60 CLKDEV_INIT("mcfuart.0", NULL, &__clk_0_24), 61 CLKDEV_INIT("mcfuart.1", NULL, &__clk_0_25), 62 CLKDEV_INIT("mcfuart.2", NULL, &__clk_0_26), 63 CLKDEV_INIT("mcftmr.0", NULL, &__clk_0_28), 64 CLKDEV_INIT("mcftmr.1", NULL, &__clk_0_29), 65 CLKDEV_INIT("mcftmr.2", NULL, &__clk_0_30), 66 CLKDEV_INIT("mcftmr.3", NULL, &__clk_0_31), 67 CLKDEV_INIT("mcfpit.0", NULL, &__clk_0_32), 68 CLKDEV_INIT("mcfpit.1", NULL, &__clk_0_33), 69 CLKDEV_INIT("mcfeport.0", NULL, &__clk_0_34), 70 CLKDEV_INIT("mcfwdt.0", NULL, &__clk_0_35), 71 CLKDEV_INIT(NULL, "pll.0", &__clk_0_36), 72 CLKDEV_INIT(NULL, "sys.0", &__clk_0_40), 73 CLKDEV_INIT("gpio.0", NULL, &__clk_0_41), 74 CLKDEV_INIT("sdram.0", NULL, &__clk_0_42), 75 }; 76 77 static struct clk * const enable_clks[] __initconst = { 78 &__clk_0_2, /* flexbus */ 79 &__clk_0_18, /* intc.0 */ 80 &__clk_0_21, /* iack.0 */ 81 &__clk_0_24, /* mcfuart.0 */ 82 &__clk_0_25, /* mcfuart.1 */ 83 &__clk_0_26, /* mcfuart.2 */ 84 85 &__clk_0_32, /* mcfpit.0 */ 86 &__clk_0_33, /* mcfpit.1 */ 87 &__clk_0_34, /* mcfeport.0 */ 88 &__clk_0_36, /* pll.0 */ 89 &__clk_0_40, /* sys.0 */ 90 &__clk_0_41, /* gpio.0 */ 91 &__clk_0_42, /* sdram.0 */ 92 }; 93 94 static struct clk * const disable_clks[] __initconst = { 95 &__clk_0_12, /* fec.0 */ 96 &__clk_0_17, /* edma */ 97 &__clk_0_22, /* imx1-i2c.0 */ 98 &__clk_0_23, /* mcfqspi.0 */ 99 &__clk_0_28, /* mcftmr.0 */ 100 &__clk_0_29, /* mcftmr.1 */ 101 &__clk_0_30, /* mcftmr.2 */ 102 &__clk_0_31, /* mcftmr.3 */ 103 &__clk_0_35, /* mcfwdt.0 */ 104 }; 105 106 107 static void __init m520x_clk_init(void) 108 { 109 unsigned i; 110 111 /* make sure these clocks are enabled */ 112 for (i = 0; i < ARRAY_SIZE(enable_clks); ++i) 113 __clk_init_enabled(enable_clks[i]); 114 /* make sure these clocks are disabled */ 115 for (i = 0; i < ARRAY_SIZE(disable_clks); ++i) 116 __clk_init_disabled(disable_clks[i]); 117 118 clkdev_add_table(m520x_clk_lookup, ARRAY_SIZE(m520x_clk_lookup)); 119 } 120 121 /***************************************************************************/ 122 123 static void __init m520x_qspi_init(void) 124 { 125 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) 126 u16 par; 127 /* setup Port QS for QSPI with gpio CS control */ 128 writeb(0x3f, MCF_GPIO_PAR_QSPI); 129 /* make U1CTS and U2RTS gpio for cs_control */ 130 par = readw(MCF_GPIO_PAR_UART); 131 par &= 0x00ff; 132 writew(par, MCF_GPIO_PAR_UART); 133 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ 134 } 135 136 /***************************************************************************/ 137 138 static void __init m520x_i2c_init(void) 139 { 140 #if IS_ENABLED(CONFIG_I2C_IMX) 141 u8 par; 142 143 /* setup Port FECI2C Pin Assignment Register for I2C */ 144 /* set PAR_SCL to SCL and PAR_SDA to SDA */ 145 par = readb(MCF_GPIO_PAR_FECI2C); 146 par |= 0x0f; 147 writeb(par, MCF_GPIO_PAR_FECI2C); 148 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */ 149 } 150 151 /***************************************************************************/ 152 153 static void __init m520x_uarts_init(void) 154 { 155 u16 par; 156 u8 par2; 157 158 /* UART0 and UART1 GPIO pin setup */ 159 par = readw(MCF_GPIO_PAR_UART); 160 par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0; 161 par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1; 162 writew(par, MCF_GPIO_PAR_UART); 163 164 /* UART1 GPIO pin setup */ 165 par2 = readb(MCF_GPIO_PAR_FECI2C); 166 par2 &= ~0x0F; 167 par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | 168 MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; 169 writeb(par2, MCF_GPIO_PAR_FECI2C); 170 } 171 172 /***************************************************************************/ 173 174 static void __init m520x_fec_init(void) 175 { 176 u8 v; 177 178 /* Set multi-function pins to ethernet mode */ 179 v = readb(MCF_GPIO_PAR_FEC); 180 writeb(v | 0xf0, MCF_GPIO_PAR_FEC); 181 182 v = readb(MCF_GPIO_PAR_FECI2C); 183 writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C); 184 } 185 186 /***************************************************************************/ 187 188 void __init config_BSP(char *commandp, int size) 189 { 190 mach_sched_init = hw_timer_init; 191 m520x_clk_init(); 192 m520x_uarts_init(); 193 m520x_fec_init(); 194 m520x_qspi_init(); 195 m520x_i2c_init(); 196 } 197 198 /***************************************************************************/ 199