1 /* 2 * arch/m68k/bvme6000/config.c 3 * 4 * Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk] 5 * 6 * Based on: 7 * 8 * linux/amiga/config.c 9 * 10 * Copyright (C) 1993 Hamish Macdonald 11 * 12 * This file is subject to the terms and conditions of the GNU General Public 13 * License. See the file README.legal in the main directory of this archive 14 * for more details. 15 */ 16 17 #include <linux/types.h> 18 #include <linux/kernel.h> 19 #include <linux/mm.h> 20 #include <linux/tty.h> 21 #include <linux/console.h> 22 #include <linux/linkage.h> 23 #include <linux/init.h> 24 #include <linux/major.h> 25 #include <linux/genhd.h> 26 #include <linux/rtc.h> 27 #include <linux/interrupt.h> 28 #include <linux/bcd.h> 29 30 #include <asm/bootinfo.h> 31 #include <asm/bootinfo-vme.h> 32 #include <asm/byteorder.h> 33 #include <asm/pgtable.h> 34 #include <asm/setup.h> 35 #include <asm/irq.h> 36 #include <asm/traps.h> 37 #include <asm/machdep.h> 38 #include <asm/bvme6000hw.h> 39 40 static void bvme6000_get_model(char *model); 41 extern void bvme6000_sched_init(irq_handler_t handler); 42 extern u32 bvme6000_gettimeoffset(void); 43 extern int bvme6000_hwclk (int, struct rtc_time *); 44 extern void bvme6000_reset (void); 45 void bvme6000_set_vectors (void); 46 47 /* Save tick handler routine pointer, will point to xtime_update() in 48 * kernel/timer/timekeeping.c, called via bvme6000_process_int() */ 49 50 static irq_handler_t tick_handler; 51 52 53 int __init bvme6000_parse_bootinfo(const struct bi_record *bi) 54 { 55 if (be16_to_cpu(bi->tag) == BI_VME_TYPE) 56 return 0; 57 else 58 return 1; 59 } 60 61 void bvme6000_reset(void) 62 { 63 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; 64 65 pr_info("\r\n\nCalled bvme6000_reset\r\n" 66 "\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r"); 67 /* The string of returns is to delay the reset until the whole 68 * message is output. */ 69 /* Enable the watchdog, via PIT port C bit 4 */ 70 71 pit->pcddr |= 0x10; /* WDOG enable */ 72 73 while(1) 74 ; 75 } 76 77 static void bvme6000_get_model(char *model) 78 { 79 sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4); 80 } 81 82 /* 83 * This function is called during kernel startup to initialize 84 * the bvme6000 IRQ handling routines. 85 */ 86 static void __init bvme6000_init_IRQ(void) 87 { 88 m68k_setup_user_interrupt(VEC_USER, 192); 89 } 90 91 void __init config_bvme6000(void) 92 { 93 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; 94 95 /* Board type is only set by newer versions of vmelilo/tftplilo */ 96 if (!vme_brdtype) { 97 if (m68k_cputype == CPU_68060) 98 vme_brdtype = VME_TYPE_BVME6000; 99 else 100 vme_brdtype = VME_TYPE_BVME4000; 101 } 102 #if 0 103 /* Call bvme6000_set_vectors() so ABORT will work, along with BVMBug 104 * debugger. Note trap_init() will splat the abort vector, but 105 * bvme6000_init_IRQ() will put it back again. Hopefully. */ 106 107 bvme6000_set_vectors(); 108 #endif 109 110 mach_max_dma_address = 0xffffffff; 111 mach_sched_init = bvme6000_sched_init; 112 mach_init_IRQ = bvme6000_init_IRQ; 113 arch_gettimeoffset = bvme6000_gettimeoffset; 114 mach_hwclk = bvme6000_hwclk; 115 mach_reset = bvme6000_reset; 116 mach_get_model = bvme6000_get_model; 117 118 pr_info("Board is %sconfigured as a System Controller\n", 119 *config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not "); 120 121 /* Now do the PIT configuration */ 122 123 pit->pgcr = 0x00; /* Unidirectional 8 bit, no handshake for now */ 124 pit->psrr = 0x18; /* PIACK and PIRQ functions enabled */ 125 pit->pacr = 0x00; /* Sub Mode 00, H2 i/p, no DMA */ 126 pit->padr = 0x00; /* Just to be tidy! */ 127 pit->paddr = 0x00; /* All inputs for now (safest) */ 128 pit->pbcr = 0x80; /* Sub Mode 1x, H4 i/p, no DMA */ 129 pit->pbdr = 0xbc | (*config_reg_ptr & BVME_CONFIG_SW1 ? 0 : 0x40); 130 /* PRI, SYSCON?, Level3, SCC clks from xtal */ 131 pit->pbddr = 0xf3; /* Mostly outputs */ 132 pit->pcdr = 0x01; /* PA transceiver disabled */ 133 pit->pcddr = 0x03; /* WDOG disable */ 134 135 /* Disable snooping for Ethernet and VME accesses */ 136 137 bvme_acr_addrctl = 0; 138 } 139 140 141 irqreturn_t bvme6000_abort_int (int irq, void *dev_id) 142 { 143 unsigned long *new = (unsigned long *)vectors; 144 unsigned long *old = (unsigned long *)0xf8000000; 145 146 /* Wait for button release */ 147 while (*(volatile unsigned char *)BVME_LOCAL_IRQ_STAT & BVME_ABORT_STATUS) 148 ; 149 150 *(new+4) = *(old+4); /* Illegal instruction */ 151 *(new+9) = *(old+9); /* Trace */ 152 *(new+47) = *(old+47); /* Trap #15 */ 153 *(new+0x1f) = *(old+0x1f); /* ABORT switch */ 154 return IRQ_HANDLED; 155 } 156 157 158 static irqreturn_t bvme6000_timer_int (int irq, void *dev_id) 159 { 160 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 161 unsigned char msr = rtc->msr & 0xc0; 162 163 rtc->msr = msr | 0x20; /* Ack the interrupt */ 164 165 return tick_handler(irq, dev_id); 166 } 167 168 /* 169 * Set up the RTC timer 1 to mode 2, so T1 output toggles every 5ms 170 * (40000 x 125ns). It will interrupt every 10ms, when T1 goes low. 171 * So, when reading the elapsed time, you should read timer1, 172 * subtract it from 39999, and then add 40000 if T1 is high. 173 * That gives you the number of 125ns ticks in to the 10ms period, 174 * so divide by 8 to get the microsecond result. 175 */ 176 177 void bvme6000_sched_init (irq_handler_t timer_routine) 178 { 179 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 180 unsigned char msr = rtc->msr & 0xc0; 181 182 rtc->msr = 0; /* Ensure timer registers accessible */ 183 184 tick_handler = timer_routine; 185 if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, 0, 186 "timer", bvme6000_timer_int)) 187 panic ("Couldn't register timer int"); 188 189 rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */ 190 rtc->t1msb = 39999 >> 8; 191 rtc->t1lsb = 39999 & 0xff; 192 rtc->irr_icr1 &= 0xef; /* Route timer 1 to INTR pin */ 193 rtc->msr = 0x40; /* Access int.cntrl, etc */ 194 rtc->pfr_icr0 = 0x80; /* Just timer 1 ints enabled */ 195 rtc->irr_icr1 = 0; 196 rtc->t1cr_omr = 0x0a; /* INTR+T1 active lo, push-pull */ 197 rtc->t0cr_rtmr &= 0xdf; /* Stop timers in standby */ 198 rtc->msr = 0; /* Access timer 1 control */ 199 rtc->t1cr_omr = 0x05; /* Mode 2, ext clk, GO */ 200 201 rtc->msr = msr; 202 203 if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0, 204 "abort", bvme6000_abort_int)) 205 panic ("Couldn't register abort int"); 206 } 207 208 209 /* This is always executed with interrupts disabled. */ 210 211 /* 212 * NOTE: Don't accept any readings within 5us of rollover, as 213 * the T1INT bit may be a little slow getting set. There is also 214 * a fault in the chip, meaning that reads may produce invalid 215 * results... 216 */ 217 218 u32 bvme6000_gettimeoffset(void) 219 { 220 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 221 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; 222 unsigned char msr = rtc->msr & 0xc0; 223 unsigned char t1int, t1op; 224 u32 v = 800000, ov; 225 226 rtc->msr = 0; /* Ensure timer registers accessible */ 227 228 do { 229 ov = v; 230 t1int = rtc->msr & 0x20; 231 t1op = pit->pcdr & 0x04; 232 rtc->t1cr_omr |= 0x40; /* Latch timer1 */ 233 v = rtc->t1msb << 8; /* Read timer1 */ 234 v |= rtc->t1lsb; /* Read timer1 */ 235 } while (t1int != (rtc->msr & 0x20) || 236 t1op != (pit->pcdr & 0x04) || 237 abs(ov-v) > 80 || 238 v > 39960); 239 240 v = 39999 - v; 241 if (!t1op) /* If in second half cycle.. */ 242 v += 40000; 243 v /= 8; /* Convert ticks to microseconds */ 244 if (t1int) 245 v += 10000; /* Int pending, + 10ms */ 246 rtc->msr = msr; 247 248 return v * 1000; 249 } 250 251 /* 252 * Looks like op is non-zero for setting the clock, and zero for 253 * reading the clock. 254 * 255 * struct hwclk_time { 256 * unsigned sec; 0..59 257 * unsigned min; 0..59 258 * unsigned hour; 0..23 259 * unsigned day; 1..31 260 * unsigned mon; 0..11 261 * unsigned year; 00... 262 * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set 263 * }; 264 */ 265 266 int bvme6000_hwclk(int op, struct rtc_time *t) 267 { 268 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 269 unsigned char msr = rtc->msr & 0xc0; 270 271 rtc->msr = 0x40; /* Ensure clock and real-time-mode-register 272 * are accessible */ 273 if (op) 274 { /* Write.... */ 275 rtc->t0cr_rtmr = t->tm_year%4; 276 rtc->bcd_tenms = 0; 277 rtc->bcd_sec = bin2bcd(t->tm_sec); 278 rtc->bcd_min = bin2bcd(t->tm_min); 279 rtc->bcd_hr = bin2bcd(t->tm_hour); 280 rtc->bcd_dom = bin2bcd(t->tm_mday); 281 rtc->bcd_mth = bin2bcd(t->tm_mon + 1); 282 rtc->bcd_year = bin2bcd(t->tm_year%100); 283 if (t->tm_wday >= 0) 284 rtc->bcd_dow = bin2bcd(t->tm_wday+1); 285 rtc->t0cr_rtmr = t->tm_year%4 | 0x08; 286 } 287 else 288 { /* Read.... */ 289 do { 290 t->tm_sec = bcd2bin(rtc->bcd_sec); 291 t->tm_min = bcd2bin(rtc->bcd_min); 292 t->tm_hour = bcd2bin(rtc->bcd_hr); 293 t->tm_mday = bcd2bin(rtc->bcd_dom); 294 t->tm_mon = bcd2bin(rtc->bcd_mth)-1; 295 t->tm_year = bcd2bin(rtc->bcd_year); 296 if (t->tm_year < 70) 297 t->tm_year += 100; 298 t->tm_wday = bcd2bin(rtc->bcd_dow)-1; 299 } while (t->tm_sec != bcd2bin(rtc->bcd_sec)); 300 } 301 302 rtc->msr = msr; 303 304 return 0; 305 } 306