1 /* 2 * arch/m68k/bvme6000/config.c 3 * 4 * Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk] 5 * 6 * Based on: 7 * 8 * linux/amiga/config.c 9 * 10 * Copyright (C) 1993 Hamish Macdonald 11 * 12 * This file is subject to the terms and conditions of the GNU General Public 13 * License. See the file README.legal in the main directory of this archive 14 * for more details. 15 */ 16 17 #include <linux/types.h> 18 #include <linux/kernel.h> 19 #include <linux/mm.h> 20 #include <linux/tty.h> 21 #include <linux/clocksource.h> 22 #include <linux/console.h> 23 #include <linux/linkage.h> 24 #include <linux/init.h> 25 #include <linux/major.h> 26 #include <linux/genhd.h> 27 #include <linux/rtc.h> 28 #include <linux/interrupt.h> 29 #include <linux/bcd.h> 30 31 #include <asm/bootinfo.h> 32 #include <asm/bootinfo-vme.h> 33 #include <asm/byteorder.h> 34 #include <asm/setup.h> 35 #include <asm/irq.h> 36 #include <asm/traps.h> 37 #include <asm/machdep.h> 38 #include <asm/bvme6000hw.h> 39 40 static void bvme6000_get_model(char *model); 41 extern void bvme6000_sched_init(void); 42 extern int bvme6000_hwclk (int, struct rtc_time *); 43 extern void bvme6000_reset (void); 44 void bvme6000_set_vectors (void); 45 46 47 int __init bvme6000_parse_bootinfo(const struct bi_record *bi) 48 { 49 if (be16_to_cpu(bi->tag) == BI_VME_TYPE) 50 return 0; 51 else 52 return 1; 53 } 54 55 void bvme6000_reset(void) 56 { 57 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; 58 59 pr_info("\r\n\nCalled bvme6000_reset\r\n" 60 "\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r"); 61 /* The string of returns is to delay the reset until the whole 62 * message is output. */ 63 /* Enable the watchdog, via PIT port C bit 4 */ 64 65 pit->pcddr |= 0x10; /* WDOG enable */ 66 67 while(1) 68 ; 69 } 70 71 static void bvme6000_get_model(char *model) 72 { 73 sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4); 74 } 75 76 /* 77 * This function is called during kernel startup to initialize 78 * the bvme6000 IRQ handling routines. 79 */ 80 static void __init bvme6000_init_IRQ(void) 81 { 82 m68k_setup_user_interrupt(VEC_USER, 192); 83 } 84 85 void __init config_bvme6000(void) 86 { 87 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; 88 89 /* Board type is only set by newer versions of vmelilo/tftplilo */ 90 if (!vme_brdtype) { 91 if (m68k_cputype == CPU_68060) 92 vme_brdtype = VME_TYPE_BVME6000; 93 else 94 vme_brdtype = VME_TYPE_BVME4000; 95 } 96 #if 0 97 /* Call bvme6000_set_vectors() so ABORT will work, along with BVMBug 98 * debugger. Note trap_init() will splat the abort vector, but 99 * bvme6000_init_IRQ() will put it back again. Hopefully. */ 100 101 bvme6000_set_vectors(); 102 #endif 103 104 mach_sched_init = bvme6000_sched_init; 105 mach_init_IRQ = bvme6000_init_IRQ; 106 mach_hwclk = bvme6000_hwclk; 107 mach_reset = bvme6000_reset; 108 mach_get_model = bvme6000_get_model; 109 110 pr_info("Board is %sconfigured as a System Controller\n", 111 *config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not "); 112 113 /* Now do the PIT configuration */ 114 115 pit->pgcr = 0x00; /* Unidirectional 8 bit, no handshake for now */ 116 pit->psrr = 0x18; /* PIACK and PIRQ functions enabled */ 117 pit->pacr = 0x00; /* Sub Mode 00, H2 i/p, no DMA */ 118 pit->padr = 0x00; /* Just to be tidy! */ 119 pit->paddr = 0x00; /* All inputs for now (safest) */ 120 pit->pbcr = 0x80; /* Sub Mode 1x, H4 i/p, no DMA */ 121 pit->pbdr = 0xbc | (*config_reg_ptr & BVME_CONFIG_SW1 ? 0 : 0x40); 122 /* PRI, SYSCON?, Level3, SCC clks from xtal */ 123 pit->pbddr = 0xf3; /* Mostly outputs */ 124 pit->pcdr = 0x01; /* PA transceiver disabled */ 125 pit->pcddr = 0x03; /* WDOG disable */ 126 127 /* Disable snooping for Ethernet and VME accesses */ 128 129 bvme_acr_addrctl = 0; 130 } 131 132 133 irqreturn_t bvme6000_abort_int (int irq, void *dev_id) 134 { 135 unsigned long *new = (unsigned long *)vectors; 136 unsigned long *old = (unsigned long *)0xf8000000; 137 138 /* Wait for button release */ 139 while (*(volatile unsigned char *)BVME_LOCAL_IRQ_STAT & BVME_ABORT_STATUS) 140 ; 141 142 *(new+4) = *(old+4); /* Illegal instruction */ 143 *(new+9) = *(old+9); /* Trace */ 144 *(new+47) = *(old+47); /* Trap #15 */ 145 *(new+0x1f) = *(old+0x1f); /* ABORT switch */ 146 return IRQ_HANDLED; 147 } 148 149 static u64 bvme6000_read_clk(struct clocksource *cs); 150 151 static struct clocksource bvme6000_clk = { 152 .name = "rtc", 153 .rating = 250, 154 .read = bvme6000_read_clk, 155 .mask = CLOCKSOURCE_MASK(32), 156 .flags = CLOCK_SOURCE_IS_CONTINUOUS, 157 }; 158 159 static u32 clk_total, clk_offset; 160 161 #define RTC_TIMER_CLOCK_FREQ 8000000 162 #define RTC_TIMER_CYCLES (RTC_TIMER_CLOCK_FREQ / HZ) 163 #define RTC_TIMER_COUNT ((RTC_TIMER_CYCLES / 2) - 1) 164 165 static irqreturn_t bvme6000_timer_int (int irq, void *dev_id) 166 { 167 unsigned long flags; 168 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 169 unsigned char msr; 170 171 local_irq_save(flags); 172 msr = rtc->msr & 0xc0; 173 rtc->msr = msr | 0x20; /* Ack the interrupt */ 174 clk_total += RTC_TIMER_CYCLES; 175 clk_offset = 0; 176 legacy_timer_tick(1); 177 local_irq_restore(flags); 178 179 return IRQ_HANDLED; 180 } 181 182 /* 183 * Set up the RTC timer 1 to mode 2, so T1 output toggles every 5ms 184 * (40000 x 125ns). It will interrupt every 10ms, when T1 goes low. 185 * So, when reading the elapsed time, you should read timer1, 186 * subtract it from 39999, and then add 40000 if T1 is high. 187 * That gives you the number of 125ns ticks in to the 10ms period, 188 * so divide by 8 to get the microsecond result. 189 */ 190 191 void bvme6000_sched_init (void) 192 { 193 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 194 unsigned char msr = rtc->msr & 0xc0; 195 196 rtc->msr = 0; /* Ensure timer registers accessible */ 197 198 if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER, "timer", 199 NULL)) 200 panic ("Couldn't register timer int"); 201 202 rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */ 203 rtc->t1msb = RTC_TIMER_COUNT >> 8; 204 rtc->t1lsb = RTC_TIMER_COUNT & 0xff; 205 rtc->irr_icr1 &= 0xef; /* Route timer 1 to INTR pin */ 206 rtc->msr = 0x40; /* Access int.cntrl, etc */ 207 rtc->pfr_icr0 = 0x80; /* Just timer 1 ints enabled */ 208 rtc->irr_icr1 = 0; 209 rtc->t1cr_omr = 0x0a; /* INTR+T1 active lo, push-pull */ 210 rtc->t0cr_rtmr &= 0xdf; /* Stop timers in standby */ 211 rtc->msr = 0; /* Access timer 1 control */ 212 rtc->t1cr_omr = 0x05; /* Mode 2, ext clk, GO */ 213 214 rtc->msr = msr; 215 216 clocksource_register_hz(&bvme6000_clk, RTC_TIMER_CLOCK_FREQ); 217 218 if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0, 219 "abort", bvme6000_abort_int)) 220 panic ("Couldn't register abort int"); 221 } 222 223 224 /* 225 * NOTE: Don't accept any readings within 5us of rollover, as 226 * the T1INT bit may be a little slow getting set. There is also 227 * a fault in the chip, meaning that reads may produce invalid 228 * results... 229 */ 230 231 static u64 bvme6000_read_clk(struct clocksource *cs) 232 { 233 unsigned long flags; 234 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 235 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; 236 unsigned char msr, msb; 237 unsigned char t1int, t1op; 238 u32 v = 800000, ov; 239 240 local_irq_save(flags); 241 242 msr = rtc->msr & 0xc0; 243 rtc->msr = 0; /* Ensure timer registers accessible */ 244 245 do { 246 ov = v; 247 t1int = rtc->msr & 0x20; 248 t1op = pit->pcdr & 0x04; 249 rtc->t1cr_omr |= 0x40; /* Latch timer1 */ 250 msb = rtc->t1msb; /* Read timer1 */ 251 v = (msb << 8) | rtc->t1lsb; /* Read timer1 */ 252 } while (t1int != (rtc->msr & 0x20) || 253 t1op != (pit->pcdr & 0x04) || 254 abs(ov-v) > 80 || 255 v > RTC_TIMER_COUNT - (RTC_TIMER_COUNT / 100)); 256 257 v = RTC_TIMER_COUNT - v; 258 if (!t1op) /* If in second half cycle.. */ 259 v += RTC_TIMER_CYCLES / 2; 260 if (msb > 0 && t1int) 261 clk_offset = RTC_TIMER_CYCLES; 262 rtc->msr = msr; 263 264 v += clk_offset + clk_total; 265 266 local_irq_restore(flags); 267 268 return v; 269 } 270 271 /* 272 * Looks like op is non-zero for setting the clock, and zero for 273 * reading the clock. 274 * 275 * struct hwclk_time { 276 * unsigned sec; 0..59 277 * unsigned min; 0..59 278 * unsigned hour; 0..23 279 * unsigned day; 1..31 280 * unsigned mon; 0..11 281 * unsigned year; 00... 282 * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set 283 * }; 284 */ 285 286 int bvme6000_hwclk(int op, struct rtc_time *t) 287 { 288 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; 289 unsigned char msr = rtc->msr & 0xc0; 290 291 rtc->msr = 0x40; /* Ensure clock and real-time-mode-register 292 * are accessible */ 293 if (op) 294 { /* Write.... */ 295 rtc->t0cr_rtmr = t->tm_year%4; 296 rtc->bcd_tenms = 0; 297 rtc->bcd_sec = bin2bcd(t->tm_sec); 298 rtc->bcd_min = bin2bcd(t->tm_min); 299 rtc->bcd_hr = bin2bcd(t->tm_hour); 300 rtc->bcd_dom = bin2bcd(t->tm_mday); 301 rtc->bcd_mth = bin2bcd(t->tm_mon + 1); 302 rtc->bcd_year = bin2bcd(t->tm_year%100); 303 if (t->tm_wday >= 0) 304 rtc->bcd_dow = bin2bcd(t->tm_wday+1); 305 rtc->t0cr_rtmr = t->tm_year%4 | 0x08; 306 } 307 else 308 { /* Read.... */ 309 do { 310 t->tm_sec = bcd2bin(rtc->bcd_sec); 311 t->tm_min = bcd2bin(rtc->bcd_min); 312 t->tm_hour = bcd2bin(rtc->bcd_hr); 313 t->tm_mday = bcd2bin(rtc->bcd_dom); 314 t->tm_mon = bcd2bin(rtc->bcd_mth)-1; 315 t->tm_year = bcd2bin(rtc->bcd_year); 316 if (t->tm_year < 70) 317 t->tm_year += 100; 318 t->tm_wday = bcd2bin(rtc->bcd_dow)-1; 319 } while (t->tm_sec != bcd2bin(rtc->bcd_sec)); 320 } 321 322 rtc->msr = msr; 323 324 return 0; 325 } 326