1comment "Machine Types" 2 3if M68KCLASSIC 4 5config AMIGA 6 bool "Amiga support" 7 depends on MMU 8 select MMU_MOTOROLA if MMU 9 help 10 This option enables support for the Amiga series of computers. If 11 you plan to use this kernel on an Amiga, say Y here and browse the 12 material available in <file:Documentation/m68k>; otherwise say N. 13 14config ATARI 15 bool "Atari support" 16 depends on MMU 17 select MMU_MOTOROLA if MMU 18 help 19 This option enables support for the 68000-based Atari series of 20 computers (including the TT, Falcon and Medusa). If you plan to use 21 this kernel on an Atari, say Y here and browse the material 22 available in <file:Documentation/m68k>; otherwise say N. 23 24config MAC 25 bool "Macintosh support" 26 depends on MMU 27 select MMU_MOTOROLA if MMU 28 help 29 This option enables support for the Apple Macintosh series of 30 computers (yes, there is experimental support now, at least for part 31 of the series). 32 33 Say N unless you're willing to code the remaining necessary support. 34 ;) 35 36config APOLLO 37 bool "Apollo support" 38 depends on MMU 39 select MMU_MOTOROLA if MMU 40 help 41 Say Y here if you want to run Linux on an MC680x0-based Apollo 42 Domain workstation such as the DN3500. 43 44config VME 45 bool "VME (Motorola and BVM) support" 46 depends on MMU 47 select MMU_MOTOROLA if MMU 48 help 49 Say Y here if you want to build a kernel for a 680x0 based VME 50 board. Boards currently supported include Motorola boards MVME147, 51 MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and 52 BVME6000 boards from BVM Ltd are also supported. 53 54config MVME147 55 bool "MVME147 support" 56 depends on MMU 57 depends on VME 58 help 59 Say Y to include support for early Motorola VME boards. This will 60 build a kernel which can run on MVME147 single-board computers. If 61 you select this option you will have to select the appropriate 62 drivers for SCSI, Ethernet and serial ports later on. 63 64config MVME16x 65 bool "MVME162, 166 and 167 support" 66 depends on MMU 67 depends on VME 68 help 69 Say Y to include support for Motorola VME boards. This will build a 70 kernel which can run on MVME162, MVME166, MVME167, MVME172, and 71 MVME177 boards. If you select this option you will have to select 72 the appropriate drivers for SCSI, Ethernet and serial ports later 73 on. 74 75config BVME6000 76 bool "BVME4000 and BVME6000 support" 77 depends on MMU 78 depends on VME 79 help 80 Say Y to include support for VME boards from BVM Ltd. This will 81 build a kernel which can run on BVME4000 and BVME6000 boards. If 82 you select this option you will have to select the appropriate 83 drivers for SCSI, Ethernet and serial ports later on. 84 85config HP300 86 bool "HP9000/300 and HP9000/400 support" 87 depends on MMU 88 select MMU_MOTOROLA if MMU 89 help 90 This option enables support for the HP9000/300 and HP9000/400 series 91 of workstations. Support for these machines is still somewhat 92 experimental. If you plan to try to use the kernel on such a machine 93 say Y here. 94 Everybody else says N. 95 96config SUN3X 97 bool "Sun3x support" 98 depends on MMU 99 select MMU_MOTOROLA if MMU 100 select M68030 101 help 102 This option enables support for the Sun 3x series of workstations. 103 Be warned that this support is very experimental. 104 Note that Sun 3x kernels are not compatible with Sun 3 hardware. 105 General Linux information on the Sun 3x series (now discontinued) 106 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. 107 108 If you don't want to compile a kernel for a Sun 3x, say N. 109 110config Q40 111 bool "Q40/Q60 support" 112 depends on MMU 113 select MMU_MOTOROLA if MMU 114 help 115 The Q40 is a Motorola 68040-based successor to the Sinclair QL 116 manufactured in Germany. There is an official Q40 home page at 117 <http://www.q40.de/>. This option enables support for the Q40 and 118 Q60. Select your CPU below. For 68LC060 don't forget to enable FPU 119 emulation. 120 121config SUN3 122 bool "Sun3 support" 123 depends on MMU 124 depends on !MMU_MOTOROLA 125 select MMU_SUN3 if MMU 126 select M68020 127 help 128 This option enables support for the Sun 3 series of workstations 129 (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires 130 that all other hardware types must be disabled, as Sun 3 kernels 131 are incompatible with all other m68k targets (including Sun 3x!). 132 133 If you don't want to compile a kernel exclusively for a Sun 3, say N. 134 135endif # M68KCLASSIC 136 137config PILOT 138 bool 139 140config PILOT3 141 bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" 142 depends on M68328 143 select PILOT 144 help 145 Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. 146 147config XCOPILOT_BUGS 148 bool "(X)Copilot support" 149 depends on PILOT3 150 help 151 Support the bugs of Xcopilot. 152 153config UCSIMM 154 bool "uCsimm module support" 155 depends on M68EZ328 156 help 157 Support for the Arcturus Networks uCsimm module. 158 159config UCDIMM 160 bool "uDsimm module support" 161 depends on M68VZ328 162 help 163 Support for the Arcturus Networks uDsimm module. 164 165config DRAGEN2 166 bool "DragenEngine II board support" 167 depends on M68VZ328 168 help 169 Support for the DragenEngine II board. 170 171config DIRECT_IO_ACCESS 172 bool "Allow user to access IO directly" 173 depends on (UCSIMM || UCDIMM || DRAGEN2) 174 help 175 Disable the CPU internal registers protection in user mode, 176 to allow a user application to read/write them. 177 178config INIT_LCD 179 bool "Initialize LCD" 180 depends on (UCSIMM || UCDIMM || DRAGEN2) 181 help 182 Initialize the LCD controller of the 68x328 processor. 183 184config MEMORY_RESERVE 185 int "Memory reservation (MiB)" 186 depends on (UCSIMM || UCDIMM) 187 help 188 Reserve certain memory regions on 68x328 based boards. 189 190config ARN5206 191 bool "Arnewsh 5206 board support" 192 depends on M5206 193 help 194 Support for the Arnewsh 5206 board. 195 196config M5206eC3 197 bool "Motorola M5206eC3 board support" 198 depends on M5206e 199 help 200 Support for the Motorola M5206eC3 board. 201 202config ELITE 203 bool "Motorola M5206eLITE board support" 204 depends on M5206e 205 help 206 Support for the Motorola M5206eLITE board. 207 208config M5235EVB 209 bool "Freescale M5235EVB support" 210 depends on M523x 211 help 212 Support for the Freescale M5235EVB board. 213 214config M5249C3 215 bool "Motorola M5249C3 board support" 216 depends on M5249 217 help 218 Support for the Motorola M5249C3 board. 219 220config M5272C3 221 bool "Motorola M5272C3 board support" 222 depends on M5272 223 help 224 Support for the Motorola M5272C3 board. 225 226config WILDFIRE 227 bool "Intec Automation Inc. WildFire board support" 228 depends on M528x 229 help 230 Support for the Intec Automation Inc. WildFire. 231 232config WILDFIREMOD 233 bool "Intec Automation Inc. WildFire module support" 234 depends on M528x 235 help 236 Support for the Intec Automation Inc. WildFire module. 237 238config ARN5307 239 bool "Arnewsh 5307 board support" 240 depends on M5307 241 help 242 Support for the Arnewsh 5307 board. 243 244config M5307C3 245 bool "Motorola M5307C3 board support" 246 depends on M5307 247 help 248 Support for the Motorola M5307C3 board. 249 250config SECUREEDGEMP3 251 bool "SnapGear SecureEdge/MP3 platform support" 252 depends on M5307 253 help 254 Support for the SnapGear SecureEdge/MP3 platform. 255 256config M5407C3 257 bool "Motorola M5407C3 board support" 258 depends on M5407 259 help 260 Support for the Motorola M5407C3 board. 261 262config FIREBEE 263 bool "FireBee board support" 264 depends on M547x 265 help 266 Support for the FireBee ColdFire 5475 based board. 267 268config CLEOPATRA 269 bool "Feith CLEOPATRA board support" 270 depends on (M5307 || M5407) 271 help 272 Support for the Feith Cleopatra boards. 273 274config CANCam 275 bool "Feith CANCam board support" 276 depends on M5272 277 help 278 Support for the Feith CANCam board. 279 280config SCALES 281 bool "Feith SCALES board support" 282 depends on M5272 283 help 284 Support for the Feith SCALES board. 285 286config NETtel 287 bool "SecureEdge/NETtel board support" 288 depends on (M5206e || M5272 || M5307) 289 help 290 Support for the SnapGear NETtel/SecureEdge/SnapGear boards. 291 292config MOD5272 293 bool "Netburner MOD-5272 board support" 294 depends on M5272 295 help 296 Support for the Netburner MOD-5272 board. 297 298if !MMU || COLDFIRE 299 300comment "Machine Options" 301 302config UBOOT 303 bool "Support for U-Boot command line parameters" 304 help 305 If you say Y here kernel will try to collect command 306 line parameters from the initial u-boot stack. 307 default n 308 309config 4KSTACKS 310 bool "Use 4Kb for kernel stacks instead of 8Kb" 311 default y 312 help 313 If you say Y here the kernel will use a 4Kb stacksize for the 314 kernel stack attached to each process/thread. This facilitates 315 running more threads on a system and also reduces the pressure 316 on the VM subsystem for higher order allocations. 317 318comment "RAM configuration" 319 320config RAMBASE 321 hex "Address of the base of RAM" 322 default "0" 323 help 324 Define the address that RAM starts at. On many platforms this is 325 0, the base of the address space. And this is the default. Some 326 platforms choose to setup their RAM at other addresses within the 327 processor address space. 328 329config RAMSIZE 330 hex "Size of RAM (in bytes), or 0 for automatic" 331 default "0x400000" 332 help 333 Define the size of the system RAM. If you select 0 then the 334 kernel will try to probe the RAM size at runtime. This is not 335 supported on all CPU types. 336 337config VECTORBASE 338 hex "Address of the base of system vectors" 339 default "0" 340 help 341 Define the address of the system vectors. Commonly this is 342 put at the start of RAM, but it doesn't have to be. On ColdFire 343 platforms this address is programmed into the VBR register, thus 344 actually setting the address to use. 345 346config MBAR 347 hex "Address of the MBAR (internal peripherals)" 348 default "0x10000000" 349 depends on HAVE_MBAR 350 help 351 Define the address of the internal system peripherals. This value 352 is set in the processors MBAR register. This is generally setup by 353 the boot loader, and will not be written by the kernel. By far most 354 ColdFire boards use the default 0x10000000 value, so if unsure then 355 use this. 356 357config IPSBAR 358 hex "Address of the IPSBAR (internal peripherals)" 359 default "0x40000000" 360 depends on HAVE_IPSBAR 361 help 362 Define the address of the internal system peripherals. This value 363 is set in the processors IPSBAR register. This is generally setup by 364 the boot loader, and will not be written by the kernel. By far most 365 ColdFire boards use the default 0x40000000 value, so if unsure then 366 use this. 367 368config KERNELBASE 369 hex "Address of the base of kernel code" 370 default "0x400" 371 help 372 Typically on m68k systems the kernel will not start at the base 373 of RAM, but usually some small offset from it. Define the start 374 address of the kernel here. The most common setup will have the 375 processor vectors at the base of RAM and then the start of the 376 kernel. On some platforms some RAM is reserved for boot loaders 377 and the kernel starts after that. The 0x400 default was based on 378 a system with the RAM based at address 0, and leaving enough room 379 for the theoretical maximum number of 256 vectors. 380 381comment "ROM configuration" 382 383config ROM 384 bool "Specify ROM linker regions" 385 default n 386 help 387 Define a ROM region for the linker script. This creates a kernel 388 that can be stored in flash, with possibly the text, and data 389 regions being copied out to RAM at startup. 390 391config ROMBASE 392 hex "Address of the base of ROM device" 393 default "0" 394 depends on ROM 395 help 396 Define the address that the ROM region starts at. Some platforms 397 use this to set their chip select region accordingly for the boot 398 device. 399 400config ROMVEC 401 hex "Address of the base of the ROM vectors" 402 default "0" 403 depends on ROM 404 help 405 This is almost always the same as the base of the ROM. Since on all 406 68000 type variants the vectors are at the base of the boot device 407 on system startup. 408 409config ROMSTART 410 hex "Address of the base of system image in ROM" 411 default "0x400" 412 depends on ROM 413 help 414 Define the start address of the system image in ROM. Commonly this 415 is strait after the ROM vectors. 416 417config ROMSIZE 418 hex "Size of the ROM device" 419 default "0x100000" 420 depends on ROM 421 help 422 Size of the ROM device. On some platforms this is used to setup 423 the chip select that controls the boot ROM device. 424 425choice 426 prompt "Kernel executes from" 427 ---help--- 428 Choose the memory type that the kernel will be running in. 429 430config RAMKERNEL 431 bool "RAM" 432 help 433 The kernel will be resident in RAM when running. 434 435config ROMKERNEL 436 bool "ROM" 437 help 438 The kernel will be resident in FLASH/ROM when running. This is 439 often referred to as Execute-in-Place (XIP), since the kernel 440 code executes from the position it is stored in the FLASH/ROM. 441 442endchoice 443 444endif 445