xref: /openbmc/linux/arch/m68k/Kconfig.machine (revision 39b6f3aa) 
1comment "Machine Types"
2
3if M68KCLASSIC
4
5config AMIGA
6	bool "Amiga support"
7	depends on MMU
8	select MMU_MOTOROLA if MMU
9	help
10	  This option enables support for the Amiga series of computers. If
11	  you plan to use this kernel on an Amiga, say Y here and browse the
12	  material available in <file:Documentation/m68k>; otherwise say N.
13
14config ATARI
15	bool "Atari support"
16	depends on MMU
17	select MMU_MOTOROLA if MMU
18	help
19	  This option enables support for the 68000-based Atari series of
20	  computers (including the TT, Falcon and Medusa). If you plan to use
21	  this kernel on an Atari, say Y here and browse the material
22	  available in <file:Documentation/m68k>; otherwise say N.
23
24config MAC
25	bool "Macintosh support"
26	depends on MMU
27	select MMU_MOTOROLA if MMU
28	help
29	  This option enables support for the Apple Macintosh series of
30	  computers (yes, there is experimental support now, at least for part
31	  of the series).
32
33	  Say N unless you're willing to code the remaining necessary support.
34	  ;)
35
36config APOLLO
37	bool "Apollo support"
38	depends on MMU
39	select MMU_MOTOROLA if MMU
40	help
41	  Say Y here if you want to run Linux on an MC680x0-based Apollo
42	  Domain workstation such as the DN3500.
43
44config VME
45	bool "VME (Motorola and BVM) support"
46	depends on MMU
47	select MMU_MOTOROLA if MMU
48	help
49	  Say Y here if you want to build a kernel for a 680x0 based VME
50	  board.  Boards currently supported include Motorola boards MVME147,
51	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
52	  BVME6000 boards from BVM Ltd are also supported.
53
54config MVME147
55	bool "MVME147 support"
56	depends on MMU
57	depends on VME
58	help
59	  Say Y to include support for early Motorola VME boards.  This will
60	  build a kernel which can run on MVME147 single-board computers.  If
61	  you select this option you will have to select the appropriate
62	  drivers for SCSI, Ethernet and serial ports later on.
63
64config MVME16x
65	bool "MVME162, 166 and 167 support"
66	depends on MMU
67	depends on VME
68	help
69	  Say Y to include support for Motorola VME boards.  This will build a
70	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
71	  MVME177 boards.  If you select this option you will have to select
72	  the appropriate drivers for SCSI, Ethernet and serial ports later
73	  on.
74
75config BVME6000
76	bool "BVME4000 and BVME6000 support"
77	depends on MMU
78	depends on VME
79	help
80	  Say Y to include support for VME boards from BVM Ltd.  This will
81	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
82	  you select this option you will have to select the appropriate
83	  drivers for SCSI, Ethernet and serial ports later on.
84
85config HP300
86	bool "HP9000/300 and HP9000/400 support"
87	depends on MMU
88	select MMU_MOTOROLA if MMU
89	help
90	  This option enables support for the HP9000/300 and HP9000/400 series
91	  of workstations. Support for these machines is still somewhat
92	  experimental. If you plan to try to use the kernel on such a machine
93	  say Y here.
94	  Everybody else says N.
95
96config SUN3X
97	bool "Sun3x support"
98	depends on MMU
99	select MMU_MOTOROLA if MMU
100	select M68030
101	help
102	  This option enables support for the Sun 3x series of workstations.
103	  Be warned that this support is very experimental.
104	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
105	  General Linux information on the Sun 3x series (now discontinued)
106	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
107
108	  If you don't want to compile a kernel for a Sun 3x, say N.
109
110config Q40
111	bool "Q40/Q60 support"
112	depends on MMU
113	select MMU_MOTOROLA if MMU
114	help
115	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
116	  manufactured in Germany.  There is an official Q40 home page at
117	  <http://www.q40.de/>.  This option enables support for the Q40 and
118	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
119	  emulation.
120
121config SUN3
122	bool "Sun3 support"
123	depends on MMU
124	depends on !MMU_MOTOROLA
125	select MMU_SUN3 if MMU
126	select M68020
127	help
128	  This option enables support for the Sun 3 series of workstations
129	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
130	  that all other hardware types must be disabled, as Sun 3 kernels
131	  are incompatible with all other m68k targets (including Sun 3x!).
132
133	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
134
135endif # M68KCLASSIC
136
137config PILOT
138	bool
139
140config PILOT3
141	bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
142	depends on M68328
143	select PILOT
144	help
145	  Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
146
147config XCOPILOT_BUGS
148	bool "(X)Copilot support"
149	depends on PILOT3
150	help
151	  Support the bugs of Xcopilot.
152
153config UC5272
154	bool "Arcturus Networks uC5272 dimm board support"
155	depends on M5272
156	help
157	  Support for the Arcturus Networks uC5272 dimm board.
158
159config UC5282
160	bool "Arcturus Networks uC5282 board support"
161	depends on M528x
162	help
163	  Support for the Arcturus Networks uC5282 dimm board.
164
165config UCSIMM
166	bool "uCsimm module support"
167	depends on M68EZ328
168	help
169	  Support for the Arcturus Networks uCsimm module.
170
171config UCDIMM
172	bool "uDsimm module support"
173	depends on M68VZ328
174	help
175	  Support for the Arcturus Networks uDsimm module.
176
177config DRAGEN2
178	bool "DragenEngine II board support"
179	depends on M68VZ328
180	help
181	  Support for the DragenEngine II board.
182
183config DIRECT_IO_ACCESS
184	bool "Allow user to access IO directly"
185	depends on (UCSIMM || UCDIMM || DRAGEN2)
186	help
187	  Disable the CPU internal registers protection in user mode,
188	  to allow a user application to read/write them.
189
190config INIT_LCD
191	bool "Initialize LCD"
192	depends on (UCSIMM || UCDIMM || DRAGEN2)
193	help
194	  Initialize the LCD controller of the 68x328 processor.
195
196config MEMORY_RESERVE
197	int "Memory reservation (MiB)"
198	depends on (UCSIMM || UCDIMM)
199	help
200	  Reserve certain memory regions on 68x328 based boards.
201
202config UCQUICC
203	bool "Lineo uCquicc board support"
204	depends on M68360
205	help
206	  Support for the Lineo uCquicc board.
207
208config ARNEWSH
209	bool
210
211config ARN5206
212	bool "Arnewsh 5206 board support"
213	depends on M5206
214	select ARNEWSH
215	help
216	  Support for the Arnewsh 5206 board.
217
218config FREESCALE
219	bool
220
221config M5206eC3
222	bool "Motorola M5206eC3 board support"
223	depends on M5206e
224	select FREESCALE
225	help
226	  Support for the Motorola M5206eC3 board.
227
228config ELITE
229	bool "Motorola M5206eLITE board support"
230	depends on M5206e
231	help
232	  Support for the Motorola M5206eLITE board.
233
234config M5208EVB
235	bool "Freescale M5208EVB board support"
236	depends on M520x
237	select FREESCALE
238	help
239	  Support for the Freescale Coldfire M5208EVB.
240
241config M5235EVB
242	bool "Freescale M5235EVB support"
243	depends on M523x
244	select FREESCALE
245	help
246	  Support for the Freescale M5235EVB board.
247
248config M5249C3
249	bool "Motorola M5249C3 board support"
250	depends on M5249
251	select FREESCALE
252	help
253	  Support for the Motorola M5249C3 board.
254
255config M5271EVB
256	bool "Freescale (Motorola) M5271EVB board support"
257	depends on M5271
258	select FREESCALE
259	help
260	  Support for the Freescale (Motorola) M5271EVB board.
261
262config M5275EVB
263	bool "Freescale (Motorola) M5275EVB board support"
264	depends on M5275
265	select FREESCALE
266	help
267	  Support for the Freescale (Motorola) M5275EVB board.
268
269config M5272C3
270	bool "Motorola M5272C3 board support"
271	depends on M5272
272	select FREESCALE
273	help
274	  Support for the Motorola M5272C3 board.
275
276config senTec
277	bool
278
279config COBRA5272
280	bool "senTec COBRA5272 board support"
281	depends on M5272
282	select senTec
283	help
284	  Support for the senTec COBRA5272 board.
285
286config AVNET
287	bool
288
289config AVNET5282
290	bool "Avnet 5282 board support"
291	depends on M528x
292	select AVNET
293	help
294	  Support for the Avnet 5282 board.
295
296config M5282EVB
297	bool "Motorola M5282EVB board support"
298	depends on M528x
299	select FREESCALE
300	help
301	  Support for the Motorola M5282EVB board.
302
303config COBRA5282
304	bool "senTec COBRA5282 board support"
305	depends on M528x
306	select senTec
307	help
308	  Support for the senTec COBRA5282 board.
309
310config SOM5282EM
311	bool "EMAC.Inc SOM5282EM board support"
312	depends on M528x
313	help
314	  Support for the EMAC.Inc SOM5282EM module.
315
316config WILDFIRE
317	bool "Intec Automation Inc. WildFire board support"
318	depends on M528x
319	help
320	  Support for the Intec Automation Inc. WildFire.
321
322config WILDFIREMOD
323	bool "Intec Automation Inc. WildFire module support"
324	depends on M528x
325	help
326	  Support for the Intec Automation Inc. WildFire module.
327
328config ARN5307
329	bool "Arnewsh 5307 board support"
330	depends on M5307
331	select ARNEWSH
332	help
333	  Support for the Arnewsh 5307 board.
334
335config M5307C3
336	bool "Motorola M5307C3 board support"
337	depends on M5307
338	select FREESCALE
339	help
340	  Support for the Motorola M5307C3 board.
341
342config SECUREEDGEMP3
343	bool "SnapGear SecureEdge/MP3 platform support"
344	depends on M5307
345	help
346	  Support for the SnapGear SecureEdge/MP3 platform.
347
348config M5329EVB
349	bool "Freescale (Motorola) M5329EVB board support"
350	depends on M532x
351	select FREESCALE
352	help
353	  Support for the Freescale (Motorola) M5329EVB board.
354
355config COBRA5329
356	bool "senTec COBRA5329 board support"
357	depends on M532x
358	help
359	  Support for the senTec COBRA5329 board.
360
361config M5373EVB
362	bool "Freescale M5373EVB board support"
363	depends on M537x
364	select FREESCALE
365	help
366	  Support for the Freescale M5373EVB board.
367
368config M5407C3
369	bool "Motorola M5407C3 board support"
370	depends on M5407
371	select FREESCALE
372	help
373	  Support for the Motorola M5407C3 board.
374
375config FIREBEE
376	bool "FireBee board support"
377	depends on M547x
378	help
379	  Support for the FireBee ColdFire 5475 based board.
380
381config CLEOPATRA
382	bool "Feith CLEOPATRA board support"
383	depends on (M5307 || M5407)
384	help
385	  Support for the Feith Cleopatra boards.
386
387config CANCam
388	bool "Feith CANCam board support"
389	depends on M5272
390	help
391	  Support for the Feith CANCam board.
392
393config SCALES
394	bool "Feith SCALES board support"
395	depends on M5272
396	help
397	  Support for the Feith SCALES board.
398
399config NETtel
400	bool "SecureEdge/NETtel board support"
401	depends on (M5206e || M5272 || M5307)
402	help
403	  Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
404
405config SNAPGEAR
406	bool "SnapGear router board support"
407	depends on NETtel
408	help
409	  Special additional support for SnapGear router boards.
410
411config SNEHA
412	bool
413
414config CPU16B
415	bool "Sneha Technologies S.L. Sarasvati board support"
416	depends on M5272
417	select SNEHA
418	help
419	  Support for the SNEHA CPU16B board.
420
421config MOD5272
422	bool "Netburner MOD-5272 board support"
423	depends on M5272
424	help
425	  Support for the Netburner MOD-5272 board.
426
427config SAVANT
428	bool
429
430config SAVANTrosie1
431	bool "Savant Rosie1 board support"
432	depends on M523x
433	select SAVANT
434	help
435	  Support for the Savant Rosie1 board.
436
437
438if !MMU || COLDFIRE
439
440comment "Machine Options"
441
442config UBOOT
443	bool "Support for U-Boot command line parameters"
444	help
445	  If you say Y here kernel will try to collect command
446	  line parameters from the initial u-boot stack.
447	default n
448
449config 4KSTACKS
450	bool "Use 4Kb for kernel stacks instead of 8Kb"
451	default y
452	help
453	  If you say Y here the kernel will use a 4Kb stacksize for the
454	  kernel stack attached to each process/thread. This facilitates
455	  running more threads on a system and also reduces the pressure
456	  on the VM subsystem for higher order allocations.
457
458comment "RAM configuration"
459
460config RAMBASE
461	hex "Address of the base of RAM"
462	default "0"
463	help
464	  Define the address that RAM starts at. On many platforms this is
465	  0, the base of the address space. And this is the default. Some
466	  platforms choose to setup their RAM at other addresses within the
467	  processor address space.
468
469config RAMSIZE
470	hex "Size of RAM (in bytes), or 0 for automatic"
471	default "0x400000"
472	help
473	  Define the size of the system RAM. If you select 0 then the
474	  kernel will try to probe the RAM size at runtime. This is not
475	  supported on all CPU types.
476
477config VECTORBASE
478	hex "Address of the base of system vectors"
479	default "0"
480	help
481	  Define the address of the system vectors. Commonly this is
482	  put at the start of RAM, but it doesn't have to be. On ColdFire
483	  platforms this address is programmed into the VBR register, thus
484	  actually setting the address to use.
485
486config MBAR
487	hex "Address of the MBAR (internal peripherals)"
488	default "0x10000000"
489	depends on HAVE_MBAR
490	help
491	  Define the address of the internal system peripherals. This value
492	  is set in the processors MBAR register. This is generally setup by
493	  the boot loader, and will not be written by the kernel. By far most
494	  ColdFire boards use the default 0x10000000 value, so if unsure then
495	  use this.
496
497config IPSBAR
498	hex "Address of the IPSBAR (internal peripherals)"
499	default "0x40000000"
500	depends on HAVE_IPSBAR
501	help
502	  Define the address of the internal system peripherals. This value
503	  is set in the processors IPSBAR register. This is generally setup by
504	  the boot loader, and will not be written by the kernel. By far most
505	  ColdFire boards use the default 0x40000000 value, so if unsure then
506	  use this.
507
508config KERNELBASE
509	hex "Address of the base of kernel code"
510	default "0x400"
511	help
512	  Typically on m68k systems the kernel will not start at the base
513	  of RAM, but usually some small offset from it. Define the start
514	  address of the kernel here. The most common setup will have the
515	  processor vectors at the base of RAM and then the start of the
516	  kernel. On some platforms some RAM is reserved for boot loaders
517	  and the kernel starts after that. The 0x400 default was based on
518	  a system with the RAM based at address 0, and leaving enough room
519	  for the theoretical maximum number of 256 vectors.
520
521comment "ROM configuration"
522
523config ROM
524	bool "Specify ROM linker regions"
525	default n
526	help
527	  Define a ROM region for the linker script. This creates a kernel
528	  that can be stored in flash, with possibly the text, and data
529	  regions being copied out to RAM at startup.
530
531config ROMBASE
532	hex "Address of the base of ROM device"
533	default "0"
534	depends on ROM
535	help
536	  Define the address that the ROM region starts at. Some platforms
537	  use this to set their chip select region accordingly for the boot
538	  device.
539
540config ROMVEC
541	hex "Address of the base of the ROM vectors"
542	default "0"
543	depends on ROM
544	help
545	  This is almost always the same as the base of the ROM. Since on all
546	  68000 type variants the vectors are at the base of the boot device
547	  on system startup.
548
549config ROMSTART
550	hex "Address of the base of system image in ROM"
551	default "0x400"
552	depends on ROM
553	help
554	  Define the start address of the system image in ROM. Commonly this
555	  is strait after the ROM vectors.
556
557config ROMSIZE
558	hex "Size of the ROM device"
559	default "0x100000"
560	depends on ROM
561	help
562	  Size of the ROM device. On some platforms this is used to setup
563	  the chip select that controls the boot ROM device.
564
565choice
566	prompt "Kernel executes from"
567	---help---
568	  Choose the memory type that the kernel will be running in.
569
570config RAMKERNEL
571	bool "RAM"
572	help
573	  The kernel will be resident in RAM when running.
574
575config ROMKERNEL
576	bool "ROM"
577	help
578	  The kernel will be resident in FLASH/ROM when running. This is
579	  often referred to as Execute-in-Place (XIP), since the kernel
580	  code executes from the position it is stored in the FLASH/ROM.
581
582endchoice
583
584endif
585