1comment "Machine Types" 2 3if M68KCLASSIC 4 5config AMIGA 6 bool "Amiga support" 7 depends on MMU 8 select MMU_MOTOROLA if MMU 9 help 10 This option enables support for the Amiga series of computers. If 11 you plan to use this kernel on an Amiga, say Y here and browse the 12 material available in <file:Documentation/m68k>; otherwise say N. 13 14config ATARI 15 bool "Atari support" 16 depends on MMU 17 select MMU_MOTOROLA if MMU 18 help 19 This option enables support for the 68000-based Atari series of 20 computers (including the TT, Falcon and Medusa). If you plan to use 21 this kernel on an Atari, say Y here and browse the material 22 available in <file:Documentation/m68k>; otherwise say N. 23 24config MAC 25 bool "Macintosh support" 26 depends on MMU 27 select MMU_MOTOROLA if MMU 28 help 29 This option enables support for the Apple Macintosh series of 30 computers (yes, there is experimental support now, at least for part 31 of the series). 32 33 Say N unless you're willing to code the remaining necessary support. 34 ;) 35 36config APOLLO 37 bool "Apollo support" 38 depends on MMU 39 select MMU_MOTOROLA if MMU 40 help 41 Say Y here if you want to run Linux on an MC680x0-based Apollo 42 Domain workstation such as the DN3500. 43 44config VME 45 bool "VME (Motorola and BVM) support" 46 depends on MMU 47 select MMU_MOTOROLA if MMU 48 help 49 Say Y here if you want to build a kernel for a 680x0 based VME 50 board. Boards currently supported include Motorola boards MVME147, 51 MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and 52 BVME6000 boards from BVM Ltd are also supported. 53 54config MVME147 55 bool "MVME147 support" 56 depends on MMU 57 depends on VME 58 help 59 Say Y to include support for early Motorola VME boards. This will 60 build a kernel which can run on MVME147 single-board computers. If 61 you select this option you will have to select the appropriate 62 drivers for SCSI, Ethernet and serial ports later on. 63 64config MVME16x 65 bool "MVME162, 166 and 167 support" 66 depends on MMU 67 depends on VME 68 help 69 Say Y to include support for Motorola VME boards. This will build a 70 kernel which can run on MVME162, MVME166, MVME167, MVME172, and 71 MVME177 boards. If you select this option you will have to select 72 the appropriate drivers for SCSI, Ethernet and serial ports later 73 on. 74 75config BVME6000 76 bool "BVME4000 and BVME6000 support" 77 depends on MMU 78 depends on VME 79 help 80 Say Y to include support for VME boards from BVM Ltd. This will 81 build a kernel which can run on BVME4000 and BVME6000 boards. If 82 you select this option you will have to select the appropriate 83 drivers for SCSI, Ethernet and serial ports later on. 84 85config HP300 86 bool "HP9000/300 and HP9000/400 support" 87 depends on MMU 88 select MMU_MOTOROLA if MMU 89 help 90 This option enables support for the HP9000/300 and HP9000/400 series 91 of workstations. Support for these machines is still somewhat 92 experimental. If you plan to try to use the kernel on such a machine 93 say Y here. 94 Everybody else says N. 95 96config SUN3X 97 bool "Sun3x support" 98 depends on MMU 99 select MMU_MOTOROLA if MMU 100 select M68030 101 help 102 This option enables support for the Sun 3x series of workstations. 103 Be warned that this support is very experimental. 104 Note that Sun 3x kernels are not compatible with Sun 3 hardware. 105 General Linux information on the Sun 3x series (now discontinued) 106 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. 107 108 If you don't want to compile a kernel for a Sun 3x, say N. 109 110config Q40 111 bool "Q40/Q60 support" 112 depends on MMU 113 select MMU_MOTOROLA if MMU 114 help 115 The Q40 is a Motorola 68040-based successor to the Sinclair QL 116 manufactured in Germany. There is an official Q40 home page at 117 <http://www.q40.de/>. This option enables support for the Q40 and 118 Q60. Select your CPU below. For 68LC060 don't forget to enable FPU 119 emulation. 120 121config SUN3 122 bool "Sun3 support" 123 depends on MMU 124 depends on !MMU_MOTOROLA 125 select MMU_SUN3 if MMU 126 select M68020 127 help 128 This option enables support for the Sun 3 series of workstations 129 (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires 130 that all other hardware types must be disabled, as Sun 3 kernels 131 are incompatible with all other m68k targets (including Sun 3x!). 132 133 If you don't want to compile a kernel exclusively for a Sun 3, say N. 134 135endif # M68KCLASSIC 136 137config PILOT 138 bool 139 140config PILOT3 141 bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" 142 depends on M68328 143 select PILOT 144 help 145 Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. 146 147config XCOPILOT_BUGS 148 bool "(X)Copilot support" 149 depends on PILOT3 150 help 151 Support the bugs of Xcopilot. 152 153config UCSIMM 154 bool "uCsimm module support" 155 depends on M68EZ328 156 help 157 Support for the Arcturus Networks uCsimm module. 158 159config UCDIMM 160 bool "uDsimm module support" 161 depends on M68VZ328 162 help 163 Support for the Arcturus Networks uDsimm module. 164 165config DRAGEN2 166 bool "DragenEngine II board support" 167 depends on M68VZ328 168 help 169 Support for the DragenEngine II board. 170 171config DIRECT_IO_ACCESS 172 bool "Allow user to access IO directly" 173 depends on (UCSIMM || UCDIMM || DRAGEN2) 174 help 175 Disable the CPU internal registers protection in user mode, 176 to allow a user application to read/write them. 177 178config INIT_LCD 179 bool "Initialize LCD" 180 depends on (UCSIMM || UCDIMM || DRAGEN2) 181 help 182 Initialize the LCD controller of the 68x328 processor. 183 184config MEMORY_RESERVE 185 int "Memory reservation (MiB)" 186 depends on (UCSIMM || UCDIMM) 187 help 188 Reserve certain memory regions on 68x328 based boards. 189 190config UCQUICC 191 bool "Lineo uCquicc board support" 192 depends on M68360 193 help 194 Support for the Lineo uCquicc board. 195 196config ARN5206 197 bool "Arnewsh 5206 board support" 198 depends on M5206 199 help 200 Support for the Arnewsh 5206 board. 201 202config M5206eC3 203 bool "Motorola M5206eC3 board support" 204 depends on M5206e 205 help 206 Support for the Motorola M5206eC3 board. 207 208config ELITE 209 bool "Motorola M5206eLITE board support" 210 depends on M5206e 211 help 212 Support for the Motorola M5206eLITE board. 213 214config M5235EVB 215 bool "Freescale M5235EVB support" 216 depends on M523x 217 help 218 Support for the Freescale M5235EVB board. 219 220config M5249C3 221 bool "Motorola M5249C3 board support" 222 depends on M5249 223 help 224 Support for the Motorola M5249C3 board. 225 226config M5272C3 227 bool "Motorola M5272C3 board support" 228 depends on M5272 229 help 230 Support for the Motorola M5272C3 board. 231 232config WILDFIRE 233 bool "Intec Automation Inc. WildFire board support" 234 depends on M528x 235 help 236 Support for the Intec Automation Inc. WildFire. 237 238config WILDFIREMOD 239 bool "Intec Automation Inc. WildFire module support" 240 depends on M528x 241 help 242 Support for the Intec Automation Inc. WildFire module. 243 244config ARN5307 245 bool "Arnewsh 5307 board support" 246 depends on M5307 247 help 248 Support for the Arnewsh 5307 board. 249 250config M5307C3 251 bool "Motorola M5307C3 board support" 252 depends on M5307 253 help 254 Support for the Motorola M5307C3 board. 255 256config SECUREEDGEMP3 257 bool "SnapGear SecureEdge/MP3 platform support" 258 depends on M5307 259 help 260 Support for the SnapGear SecureEdge/MP3 platform. 261 262config M5407C3 263 bool "Motorola M5407C3 board support" 264 depends on M5407 265 help 266 Support for the Motorola M5407C3 board. 267 268config FIREBEE 269 bool "FireBee board support" 270 depends on M547x 271 help 272 Support for the FireBee ColdFire 5475 based board. 273 274config CLEOPATRA 275 bool "Feith CLEOPATRA board support" 276 depends on (M5307 || M5407) 277 help 278 Support for the Feith Cleopatra boards. 279 280config CANCam 281 bool "Feith CANCam board support" 282 depends on M5272 283 help 284 Support for the Feith CANCam board. 285 286config SCALES 287 bool "Feith SCALES board support" 288 depends on M5272 289 help 290 Support for the Feith SCALES board. 291 292config NETtel 293 bool "SecureEdge/NETtel board support" 294 depends on (M5206e || M5272 || M5307) 295 help 296 Support for the SnapGear NETtel/SecureEdge/SnapGear boards. 297 298config MOD5272 299 bool "Netburner MOD-5272 board support" 300 depends on M5272 301 help 302 Support for the Netburner MOD-5272 board. 303 304if !MMU || COLDFIRE 305 306comment "Machine Options" 307 308config UBOOT 309 bool "Support for U-Boot command line parameters" 310 help 311 If you say Y here kernel will try to collect command 312 line parameters from the initial u-boot stack. 313 default n 314 315config 4KSTACKS 316 bool "Use 4Kb for kernel stacks instead of 8Kb" 317 default y 318 help 319 If you say Y here the kernel will use a 4Kb stacksize for the 320 kernel stack attached to each process/thread. This facilitates 321 running more threads on a system and also reduces the pressure 322 on the VM subsystem for higher order allocations. 323 324comment "RAM configuration" 325 326config RAMBASE 327 hex "Address of the base of RAM" 328 default "0" 329 help 330 Define the address that RAM starts at. On many platforms this is 331 0, the base of the address space. And this is the default. Some 332 platforms choose to setup their RAM at other addresses within the 333 processor address space. 334 335config RAMSIZE 336 hex "Size of RAM (in bytes), or 0 for automatic" 337 default "0x400000" 338 help 339 Define the size of the system RAM. If you select 0 then the 340 kernel will try to probe the RAM size at runtime. This is not 341 supported on all CPU types. 342 343config VECTORBASE 344 hex "Address of the base of system vectors" 345 default "0" 346 help 347 Define the address of the system vectors. Commonly this is 348 put at the start of RAM, but it doesn't have to be. On ColdFire 349 platforms this address is programmed into the VBR register, thus 350 actually setting the address to use. 351 352config MBAR 353 hex "Address of the MBAR (internal peripherals)" 354 default "0x10000000" 355 depends on HAVE_MBAR 356 help 357 Define the address of the internal system peripherals. This value 358 is set in the processors MBAR register. This is generally setup by 359 the boot loader, and will not be written by the kernel. By far most 360 ColdFire boards use the default 0x10000000 value, so if unsure then 361 use this. 362 363config IPSBAR 364 hex "Address of the IPSBAR (internal peripherals)" 365 default "0x40000000" 366 depends on HAVE_IPSBAR 367 help 368 Define the address of the internal system peripherals. This value 369 is set in the processors IPSBAR register. This is generally setup by 370 the boot loader, and will not be written by the kernel. By far most 371 ColdFire boards use the default 0x40000000 value, so if unsure then 372 use this. 373 374config KERNELBASE 375 hex "Address of the base of kernel code" 376 default "0x400" 377 help 378 Typically on m68k systems the kernel will not start at the base 379 of RAM, but usually some small offset from it. Define the start 380 address of the kernel here. The most common setup will have the 381 processor vectors at the base of RAM and then the start of the 382 kernel. On some platforms some RAM is reserved for boot loaders 383 and the kernel starts after that. The 0x400 default was based on 384 a system with the RAM based at address 0, and leaving enough room 385 for the theoretical maximum number of 256 vectors. 386 387comment "ROM configuration" 388 389config ROM 390 bool "Specify ROM linker regions" 391 default n 392 help 393 Define a ROM region for the linker script. This creates a kernel 394 that can be stored in flash, with possibly the text, and data 395 regions being copied out to RAM at startup. 396 397config ROMBASE 398 hex "Address of the base of ROM device" 399 default "0" 400 depends on ROM 401 help 402 Define the address that the ROM region starts at. Some platforms 403 use this to set their chip select region accordingly for the boot 404 device. 405 406config ROMVEC 407 hex "Address of the base of the ROM vectors" 408 default "0" 409 depends on ROM 410 help 411 This is almost always the same as the base of the ROM. Since on all 412 68000 type variants the vectors are at the base of the boot device 413 on system startup. 414 415config ROMSTART 416 hex "Address of the base of system image in ROM" 417 default "0x400" 418 depends on ROM 419 help 420 Define the start address of the system image in ROM. Commonly this 421 is strait after the ROM vectors. 422 423config ROMSIZE 424 hex "Size of the ROM device" 425 default "0x100000" 426 depends on ROM 427 help 428 Size of the ROM device. On some platforms this is used to setup 429 the chip select that controls the boot ROM device. 430 431choice 432 prompt "Kernel executes from" 433 ---help--- 434 Choose the memory type that the kernel will be running in. 435 436config RAMKERNEL 437 bool "RAM" 438 help 439 The kernel will be resident in RAM when running. 440 441config ROMKERNEL 442 bool "ROM" 443 help 444 The kernel will be resident in FLASH/ROM when running. This is 445 often referred to as Execute-in-Place (XIP), since the kernel 446 code executes from the position it is stored in the FLASH/ROM. 447 448endchoice 449 450endif 451