xref: /openbmc/linux/arch/m68k/Kconfig.devices (revision ba61bb17)
1# SPDX-License-Identifier: GPL-2.0
2if MMU
3
4config ARCH_MAY_HAVE_PC_FDC
5	bool
6	depends on BROKEN && (Q40 || SUN3X)
7	default y
8
9menu "Platform devices"
10
11config HEARTBEAT
12	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
13	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
14	help
15	  Use the power-on LED on your machine as a load meter.  The exact
16	  behavior is platform-dependent, but normally the flash frequency is
17	  a hyperbolic function of the 5-minute load average.
18
19# We have a dedicated heartbeat LED. :-)
20config PROC_HARDWARE
21	bool "/proc/hardware support"
22	help
23	  Say Y here to support the /proc/hardware file, which gives you
24	  access to information about the machine you're running on,
25	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
26	  and memory size.
27
28config NATFEAT
29	bool "ARAnyM emulator support"
30	depends on ATARI
31	help
32	  This option enables support for ARAnyM native features, such as
33	  access to a disk image as /dev/hda.
34
35config NFBLOCK
36	tristate "NatFeat block device support"
37	depends on BLOCK && NATFEAT
38	help
39	  Say Y to include support for the ARAnyM NatFeat block device
40	  which allows direct access to the hard drives without using
41	  the hardware emulation.
42
43config NFCON
44	tristate "NatFeat console driver"
45	depends on TTY && NATFEAT
46	help
47	  Say Y to include support for the ARAnyM NatFeat console driver
48	  which allows the console output to be redirected to the stderr
49	  output of ARAnyM.
50
51config NFETH
52	tristate "NatFeat Ethernet support"
53	depends on ETHERNET && NATFEAT
54	help
55	  Say Y to include support for the ARAnyM NatFeat network device
56	  which will emulate a regular ethernet device while presenting an
57	  ethertap device to the host system.
58
59config ATARI_ETHERNAT
60	bool "Atari EtherNAT Ethernet support"
61	depends on ATARI
62	---help---
63	  Say Y to include support for the EtherNAT network adapter for the
64	  CT/60 extension port.
65
66	  To compile the actual ethernet driver, choose Y or M for the SMC91X
67	  option in the network device section; the module will be called smc91x.
68
69config ATARI_ETHERNEC
70	bool "Atari EtherNEC Ethernet support"
71	depends on ATARI_ROM_ISA
72	---help---
73	  Say Y to include support for the EtherNEC network adapter for the
74	  ROM port. The driver works by polling instead of interrupts, so it
75	  is quite slow.
76
77	  This driver also supports the ethernet part of the NetUSBee ROM
78	  port combined Ethernet/USB adapter.
79
80	  To compile the actual ethernet driver, choose Y or M in for the NE2000
81	  option in the network device section; the module will be called ne.
82
83endmenu
84
85menu "Character devices"
86
87config ATARI_DSP56K
88	tristate "Atari DSP56k support"
89	depends on ATARI
90	help
91	  If you want to be able to use the DSP56001 in Falcons, say Y. This
92	  driver is still experimental, and if you don't know what it is, or
93	  if you don't have this processor, just say N.
94
95	  To compile this driver as a module, choose M here.
96
97config AMIGA_BUILTIN_SERIAL
98	tristate "Amiga builtin serial support"
99	depends on AMIGA && TTY
100	help
101	  If you want to use your Amiga's built-in serial port in Linux,
102	  answer Y.
103
104	  To compile this driver as a module, choose M here.
105
106config HPDCA
107	tristate "HP DCA serial support"
108	depends on DIO && SERIAL_8250
109	help
110	  If you want to use the internal "DCA" serial ports on an HP300
111	  machine, say Y here.
112
113config HPAPCI
114	tristate "HP APCI serial support"
115	depends on HP300 && SERIAL_8250
116	help
117	  If you want to use the internal "APCI" serial ports on an HP400
118	  machine, say Y here.
119
120config SERIAL_CONSOLE
121	bool "Support for serial port console"
122	depends on AMIGA_BUILTIN_SERIAL=y
123	---help---
124	  If you say Y here, it will be possible to use a serial port as the
125	  system console (the system console is the device which receives all
126	  kernel messages and warnings and which allows logins in single user
127	  mode). This could be useful if some terminal or printer is connected
128	  to that serial port.
129
130	  Even if you say Y here, the currently visible virtual console
131	  (/dev/tty0) will still be used as the system console by default, but
132	  you can alter that using a kernel command line option such as
133	  "console=ttyS1". (Try "man bootparam" or see the documentation of
134	  your boot loader about how to pass options to the kernel at boot
135	  time.)
136
137	  If you don't have a graphical console and you say Y here, the
138	  kernel will automatically use the first serial line, /dev/ttyS0, as
139	  system console.
140
141	  If unsure, say N.
142
143endmenu
144
145endif
146