1if MMU 2 3config ARCH_MAY_HAVE_PC_FDC 4 bool 5 depends on BROKEN && (Q40 || SUN3X) 6 default y 7 8menu "Platform devices" 9 10config HEARTBEAT 11 bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 12 default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 13 help 14 Use the power-on LED on your machine as a load meter. The exact 15 behavior is platform-dependent, but normally the flash frequency is 16 a hyperbolic function of the 5-minute load average. 17 18# We have a dedicated heartbeat LED. :-) 19config PROC_HARDWARE 20 bool "/proc/hardware support" 21 help 22 Say Y here to support the /proc/hardware file, which gives you 23 access to information about the machine you're running on, 24 including the model, CPU, MMU, clock speed, BogoMIPS rating, 25 and memory size. 26 27config NATFEAT 28 bool "ARAnyM emulator support" 29 depends on ATARI 30 help 31 This option enables support for ARAnyM native features, such as 32 access to a disk image as /dev/hda. 33 34config NFBLOCK 35 tristate "NatFeat block device support" 36 depends on BLOCK && NATFEAT 37 help 38 Say Y to include support for the ARAnyM NatFeat block device 39 which allows direct access to the hard drives without using 40 the hardware emulation. 41 42config NFCON 43 tristate "NatFeat console driver" 44 depends on TTY && NATFEAT 45 help 46 Say Y to include support for the ARAnyM NatFeat console driver 47 which allows the console output to be redirected to the stderr 48 output of ARAnyM. 49 50config NFETH 51 tristate "NatFeat Ethernet support" 52 depends on ETHERNET && NATFEAT 53 help 54 Say Y to include support for the ARAnyM NatFeat network device 55 which will emulate a regular ethernet device while presenting an 56 ethertap device to the host system. 57 58config ATARI_ETHERNAT 59 bool "Atari EtherNAT Ethernet support" 60 depends on ATARI 61 ---help--- 62 Say Y to include support for the EtherNAT network adapter for the 63 CT/60 extension port. 64 65 To compile the actual ethernet driver, choose Y or M for the SMC91X 66 option in the network device section; the module will be called smc91x. 67 68config ATARI_ETHERNEC 69 bool "Atari EtherNEC Ethernet support" 70 depends on ATARI_ROM_ISA 71 ---help--- 72 Say Y to include support for the EtherNEC network adapter for the 73 ROM port. The driver works by polling instead of interrupts, so it 74 is quite slow. 75 76 This driver also suppports the ethernet part of the NetUSBee ROM 77 port combined Ethernet/USB adapter. 78 79 To compile the actual ethernet driver, choose Y or M in for the NE2000 80 option in the network device section; the module will be called ne. 81 82endmenu 83 84menu "Character devices" 85 86config ATARI_DSP56K 87 tristate "Atari DSP56k support" 88 depends on ATARI 89 help 90 If you want to be able to use the DSP56001 in Falcons, say Y. This 91 driver is still experimental, and if you don't know what it is, or 92 if you don't have this processor, just say N. 93 94 To compile this driver as a module, choose M here. 95 96config AMIGA_BUILTIN_SERIAL 97 tristate "Amiga builtin serial support" 98 depends on AMIGA 99 help 100 If you want to use your Amiga's built-in serial port in Linux, 101 answer Y. 102 103 To compile this driver as a module, choose M here. 104 105config HPDCA 106 tristate "HP DCA serial support" 107 depends on DIO && SERIAL_8250 108 help 109 If you want to use the internal "DCA" serial ports on an HP300 110 machine, say Y here. 111 112config HPAPCI 113 tristate "HP APCI serial support" 114 depends on HP300 && SERIAL_8250 115 help 116 If you want to use the internal "APCI" serial ports on an HP400 117 machine, say Y here. 118 119config SERIAL_CONSOLE 120 bool "Support for serial port console" 121 depends on AMIGA_BUILTIN_SERIAL=y 122 ---help--- 123 If you say Y here, it will be possible to use a serial port as the 124 system console (the system console is the device which receives all 125 kernel messages and warnings and which allows logins in single user 126 mode). This could be useful if some terminal or printer is connected 127 to that serial port. 128 129 Even if you say Y here, the currently visible virtual console 130 (/dev/tty0) will still be used as the system console by default, but 131 you can alter that using a kernel command line option such as 132 "console=ttyS1". (Try "man bootparam" or see the documentation of 133 your boot loader about how to pass options to the kernel at boot 134 time.) 135 136 If you don't have a graphical console and you say Y here, the 137 kernel will automatically use the first serial line, /dev/ttyS0, as 138 system console. 139 140 If unsure, say N. 141 142endmenu 143 144endif 145