xref: /openbmc/linux/arch/m68k/Kconfig.cpu (revision e481ff3f)
1# SPDX-License-Identifier: GPL-2.0
2comment "Processor Type"
3
4choice
5	prompt "CPU family support"
6	default M68KCLASSIC if MMU
7	default COLDFIRE if !MMU
8	help
9	  The Freescale (was Motorola) M68K family of processors implements
10	  the full 68000 processor instruction set.
11	  The Freescale ColdFire family of processors is a modern derivative
12	  of the 68000 processor family. They are mainly targeted at embedded
13	  applications, and are all System-On-Chip (SOC) devices, as opposed
14	  to stand alone CPUs. They implement a subset of the original 68000
15	  processor instruction set.
16	  If you anticipate running this kernel on a computer with a classic
17	  MC68xxx processor, select M68KCLASSIC.
18	  If you anticipate running this kernel on a computer with a ColdFire
19	  processor, select COLDFIRE.
20
21config M68KCLASSIC
22	bool "Classic M68K CPU family support"
23	select HAVE_ARCH_PFN_VALID
24
25config COLDFIRE
26	bool "Coldfire CPU family support"
27	select ARCH_HAVE_CUSTOM_GPIO_H
28	select CPU_HAS_NO_BITFIELDS
29	select CPU_HAS_NO_MULDIV64
30	select GENERIC_CSUM
31	select GPIOLIB
32	select HAVE_LEGACY_CLK
33
34endchoice
35
36if M68KCLASSIC
37
38config M68000
39	bool
40	depends on !MMU
41	select CPU_HAS_NO_BITFIELDS
42	select CPU_HAS_NO_MULDIV64
43	select CPU_HAS_NO_UNALIGNED
44	select GENERIC_CSUM
45	select CPU_NO_EFFICIENT_FFS
46	select HAVE_ARCH_HASH
47	help
48	  The Freescale (was Motorola) 68000 CPU is the first generation of
49	  the well known M68K family of processors. The CPU core as well as
50	  being available as a stand alone CPU was also used in many
51	  System-On-Chip devices (eg 68328, 68302, etc). It does not contain
52	  a paging MMU.
53
54config MCPU32
55	bool
56	select CPU_HAS_NO_BITFIELDS
57	select CPU_HAS_NO_UNALIGNED
58	select CPU_NO_EFFICIENT_FFS
59	help
60	  The Freescale (was then Motorola) CPU32 is a CPU core that is
61	  based on the 68020 processor. For the most part it is used in
62	  System-On-Chip parts, and does not contain a paging MMU.
63
64config M68020
65	bool "68020 support"
66	depends on MMU
67	select FPU
68	select CPU_HAS_ADDRESS_SPACES
69	help
70	  If you anticipate running this kernel on a computer with a MC68020
71	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
72	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
73	  Sun 3, which provides its own version.
74
75config M68030
76	bool "68030 support"
77	depends on MMU && !MMU_SUN3
78	select FPU
79	select CPU_HAS_ADDRESS_SPACES
80	help
81	  If you anticipate running this kernel on a computer with a MC68030
82	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
83	  work, as it does not include an MMU (Memory Management Unit).
84
85config M68040
86	bool "68040 support"
87	depends on MMU && !MMU_SUN3
88	select FPU
89	select CPU_HAS_ADDRESS_SPACES
90	help
91	  If you anticipate running this kernel on a computer with a MC68LC040
92	  or MC68040 processor, say Y. Otherwise, say N. Note that an
93	  MC68EC040 will not work, as it does not include an MMU (Memory
94	  Management Unit).
95
96config M68060
97	bool "68060 support"
98	depends on MMU && !MMU_SUN3
99	select FPU
100	select CPU_HAS_ADDRESS_SPACES
101	help
102	  If you anticipate running this kernel on a computer with a MC68060
103	  processor, say Y. Otherwise, say N.
104
105config M68328
106	bool
107	depends on !MMU
108	select LEGACY_TIMER_TICK
109	select M68000
110	help
111	  Motorola 68328 processor support.
112
113config M68EZ328
114	bool
115	depends on !MMU
116	select LEGACY_TIMER_TICK
117	select M68000
118	help
119	  Motorola 68EX328 processor support.
120
121config M68VZ328
122	bool
123	depends on !MMU
124	select LEGACY_TIMER_TICK
125	select M68000
126	help
127	  Motorola 68VZ328 processor support.
128
129endif # M68KCLASSIC
130
131if COLDFIRE
132
133choice
134	prompt "ColdFire SoC type"
135	default M520x
136	help
137	  Select the type of ColdFire System-on-Chip (SoC) that you want
138	  to build for.
139
140config M5206
141	bool "MCF5206"
142	depends on !MMU
143	select COLDFIRE_SW_A7
144	select COLDFIRE_TIMERS
145	select HAVE_MBAR
146	select CPU_NO_EFFICIENT_FFS
147	help
148	  Motorola ColdFire 5206 processor support.
149
150config M5206e
151	bool "MCF5206e"
152	depends on !MMU
153	select COLDFIRE_SW_A7
154	select COLDFIRE_TIMERS
155	select HAVE_MBAR
156	select CPU_NO_EFFICIENT_FFS
157	help
158	  Motorola ColdFire 5206e processor support.
159
160config M520x
161	bool "MCF520x"
162	depends on !MMU
163	select COLDFIRE_PIT_TIMER
164	select HAVE_CACHE_SPLIT
165	help
166	   Freescale Coldfire 5207/5208 processor support.
167
168config M523x
169	bool "MCF523x"
170	depends on !MMU
171	select COLDFIRE_PIT_TIMER
172	select HAVE_CACHE_SPLIT
173	select HAVE_IPSBAR
174	help
175	  Freescale Coldfire 5230/1/2/4/5 processor support
176
177config M5249
178	bool "MCF5249"
179	depends on !MMU
180	select COLDFIRE_SW_A7
181	select COLDFIRE_TIMERS
182	select HAVE_MBAR
183	select CPU_NO_EFFICIENT_FFS
184	help
185	  Motorola ColdFire 5249 processor support.
186
187config M525x
188	bool "MCF525x"
189	depends on !MMU
190	select COLDFIRE_SW_A7
191	select COLDFIRE_TIMERS
192	select HAVE_MBAR
193	select CPU_NO_EFFICIENT_FFS
194	help
195	  Freescale (Motorola) Coldfire 5251/5253 processor support.
196
197config M5271
198	bool "MCF5271"
199	depends on !MMU
200	select COLDFIRE_PIT_TIMER
201	select M527x
202	select HAVE_CACHE_SPLIT
203	select HAVE_IPSBAR
204	help
205	  Freescale (Motorola) ColdFire 5270/5271 processor support.
206
207config M5272
208	bool "MCF5272"
209	depends on !MMU
210	select COLDFIRE_SW_A7
211	select COLDFIRE_TIMERS
212	select HAVE_MBAR
213	select CPU_NO_EFFICIENT_FFS
214	help
215	  Motorola ColdFire 5272 processor support.
216
217config M5275
218	bool "MCF5275"
219	depends on !MMU
220	select COLDFIRE_PIT_TIMER
221	select M527x
222	select HAVE_CACHE_SPLIT
223	select HAVE_IPSBAR
224	help
225	  Freescale (Motorola) ColdFire 5274/5275 processor support.
226
227config M528x
228	bool "MCF528x"
229	depends on !MMU
230	select COLDFIRE_PIT_TIMER
231	select HAVE_CACHE_SPLIT
232	select HAVE_IPSBAR
233	help
234	  Motorola ColdFire 5280/5282 processor support.
235
236config M5307
237	bool "MCF5307"
238	depends on !MMU
239	select COLDFIRE_TIMERS
240	select COLDFIRE_SW_A7
241	select HAVE_CACHE_CB
242	select HAVE_MBAR
243	select CPU_NO_EFFICIENT_FFS
244	help
245	  Motorola ColdFire 5307 processor support.
246
247config M532x
248	bool "MCF532x"
249	depends on !MMU
250	select COLDFIRE_TIMERS
251	select M53xx
252	select HAVE_CACHE_CB
253	help
254	  Freescale (Motorola) ColdFire 532x processor support.
255
256config M537x
257	bool "MCF537x"
258	depends on !MMU
259	select COLDFIRE_TIMERS
260	select M53xx
261	select HAVE_CACHE_CB
262	help
263	  Freescale ColdFire 537x processor support.
264
265config M5407
266	bool "MCF5407"
267	depends on !MMU
268	select COLDFIRE_SW_A7
269	select COLDFIRE_TIMERS
270	select HAVE_CACHE_CB
271	select HAVE_MBAR
272	select CPU_NO_EFFICIENT_FFS
273	help
274	  Motorola ColdFire 5407 processor support.
275
276config M547x
277	bool "MCF547x"
278	select M54xx
279	select COLDFIRE_SLTIMERS
280	select MMU_COLDFIRE if MMU
281	select FPU if MMU
282	select HAVE_CACHE_CB
283	select HAVE_MBAR
284	select CPU_NO_EFFICIENT_FFS
285	help
286	  Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
287
288config M548x
289	bool "MCF548x"
290	select COLDFIRE_SLTIMERS
291	select MMU_COLDFIRE if MMU
292	select FPU if MMU
293	select M54xx
294	select HAVE_CACHE_CB
295	select HAVE_MBAR
296	select CPU_NO_EFFICIENT_FFS
297	help
298	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
299
300config M5441x
301	bool "MCF5441x"
302	select COLDFIRE_PIT_TIMER
303	select MMU_COLDFIRE if MMU
304	select HAVE_CACHE_CB
305	help
306	  Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
307
308endchoice
309
310config M527x
311	bool
312
313config M53xx
314	bool
315
316config M54xx
317	select HAVE_PCI
318	bool
319
320config COLDFIRE_PIT_TIMER
321	bool
322
323config COLDFIRE_TIMERS
324	bool
325	select LEGACY_TIMER_TICK
326
327config COLDFIRE_SLTIMERS
328	bool
329	select LEGACY_TIMER_TICK
330
331endif # COLDFIRE
332
333
334comment "Processor Specific Options"
335
336config M68KFPU_EMU
337	bool "Math emulation support"
338	depends on MMU
339	help
340	  At some point in the future, this will cause floating-point math
341	  instructions to be emulated by the kernel on machines that lack a
342	  floating-point math coprocessor.  Thrill-seekers and chronically
343	  sleep-deprived psychotic hacker types can say Y now, everyone else
344	  should probably wait a while.
345
346config M68KFPU_EMU_EXTRAPREC
347	bool "Math emulation extra precision"
348	depends on M68KFPU_EMU
349	help
350	  The fpu uses normally a few bit more during calculations for
351	  correct rounding, the emulator can (often) do the same but this
352	  extra calculation can cost quite some time, so you can disable
353	  it here. The emulator will then "only" calculate with a 64 bit
354	  mantissa and round slightly incorrect, what is more than enough
355	  for normal usage.
356
357config M68KFPU_EMU_ONLY
358	bool "Math emulation only kernel"
359	depends on M68KFPU_EMU
360	help
361	  This option prevents any floating-point instructions from being
362	  compiled into the kernel, thereby the kernel doesn't save any
363	  floating point context anymore during task switches, so this
364	  kernel will only be usable on machines without a floating-point
365	  math coprocessor. This makes the kernel a bit faster as no tests
366	  needs to be executed whether a floating-point instruction in the
367	  kernel should be executed or not.
368
369config ADVANCED
370	bool "Advanced configuration options"
371	depends on MMU
372	help
373	  This gives you access to some advanced options for the CPU. The
374	  defaults should be fine for most users, but these options may make
375	  it possible for you to improve performance somewhat if you know what
376	  you are doing.
377
378	  Note that the answer to this question won't directly affect the
379	  kernel: saying N will just cause the configurator to skip all
380	  the questions about these options.
381
382	  Most users should say N to this question.
383
384config RMW_INSNS
385	bool "Use read-modify-write instructions"
386	depends on ADVANCED
387	help
388	  This allows to use certain instructions that work with indivisible
389	  read-modify-write bus cycles. While this is faster than the
390	  workaround of disabling interrupts, it can conflict with DMA
391	  ( = direct memory access) on many Amiga systems, and it is also said
392	  to destabilize other machines. It is very likely that this will
393	  cause serious problems on any Amiga or Atari Medusa if set. The only
394	  configuration where it should work are 68030-based Ataris, where it
395	  apparently improves performance. But you've been warned! Unless you
396	  really know what you are doing, say N. Try Y only if you're quite
397	  adventurous.
398
399config SINGLE_MEMORY_CHUNK
400	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
401	depends on MMU
402	default y if SUN3 || MMU_COLDFIRE
403	help
404	  Ignore all but the first contiguous chunk of physical memory for VM
405	  purposes.  This will save a few bytes kernel size and may speed up
406	  some operations.
407	  When this option os set to N, you may want to lower "Maximum zone
408	  order" to save memory that could be wasted for unused memory map.
409	  Say N if not sure.
410
411config FORCE_MAX_ZONEORDER
412	int "Maximum zone order" if ADVANCED
413	depends on !SINGLE_MEMORY_CHUNK
414	default "11"
415	help
416	  The kernel memory allocator divides physically contiguous memory
417	  blocks into "zones", where each zone is a power of two number of
418	  pages.  This option selects the largest power of two that the kernel
419	  keeps in the memory allocator.  If you need to allocate very large
420	  blocks of physically contiguous memory, then you may need to
421	  increase this value.
422
423	  For systems that have holes in their physical address space this
424	  value also defines the minimal size of the hole that allows
425	  freeing unused memory map.
426
427	  This config option is actually maximum order plus one. For example,
428	  a value of 11 means that the largest free memory block is 2^10 pages.
429
430config 060_WRITETHROUGH
431	bool "Use write-through caching for 68060 supervisor accesses"
432	depends on ADVANCED && M68060
433	help
434	  The 68060 generally uses copyback caching of recently accessed data.
435	  Copyback caching means that memory writes will be held in an on-chip
436	  cache and only written back to memory some time later.  Saying Y
437	  here will force supervisor (kernel) accesses to use writethrough
438	  caching.  Writethrough caching means that data is written to memory
439	  straight away, so that cache and memory data always agree.
440	  Writethrough caching is less efficient, but is needed for some
441	  drivers on 68060 based systems where the 68060 bus snooping signal
442	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
443	  this problem.
444
445config M68K_L2_CACHE
446	bool
447	depends on MAC
448	default y
449
450config CPU_HAS_NO_BITFIELDS
451	bool
452
453config CPU_HAS_NO_MULDIV64
454	bool
455
456config CPU_HAS_NO_UNALIGNED
457	bool
458
459config CPU_HAS_ADDRESS_SPACES
460	bool
461
462config FPU
463	bool
464
465config COLDFIRE_SW_A7
466	bool
467
468config HAVE_CACHE_SPLIT
469	bool
470
471config HAVE_CACHE_CB
472	bool
473
474config HAVE_MBAR
475	bool
476
477config HAVE_IPSBAR
478	bool
479
480config CLOCK_FREQ
481	int "Set the core clock frequency"
482	default "25000000" if M5206
483	default "54000000" if M5206e
484	default "166666666" if M520x
485	default "140000000" if M5249
486	default "150000000" if M527x || M523x
487	default "90000000" if M5307
488	default "50000000" if M5407
489	default "266000000" if M54xx
490	default "66666666"
491	depends on COLDFIRE
492	help
493	  Define the CPU clock frequency in use. This is the core clock
494	  frequency, it may or may not be the same as the external clock
495	  crystal fitted to your board. Some processors have an internal
496	  PLL and can have their frequency programmed at run time, others
497	  use internal dividers. In general the kernel won't setup a PLL
498	  if it is fitted (there are some exceptions). This value will be
499	  specific to the exact CPU that you are using.
500
501config OLDMASK
502	bool "Old mask 5307 (1H55J) silicon"
503	depends on M5307
504	help
505	  Build support for the older revision ColdFire 5307 silicon.
506	  Specifically this is the 1H55J mask revision.
507
508if HAVE_CACHE_SPLIT
509choice
510	prompt "Split Cache Configuration"
511	default CACHE_I
512
513config CACHE_I
514	bool "Instruction"
515	help
516	  Use all of the ColdFire CPU cache memory as an instruction cache.
517
518config CACHE_D
519	bool "Data"
520	help
521	  Use all of the ColdFire CPU cache memory as a data cache.
522
523config CACHE_BOTH
524	bool "Both"
525	help
526	  Split the ColdFire CPU cache, and use half as an instruction cache
527	  and half as a data cache.
528endchoice
529endif
530
531if HAVE_CACHE_CB
532choice
533	prompt "Data cache mode"
534	default CACHE_WRITETHRU
535
536config CACHE_WRITETHRU
537	bool "Write-through"
538	help
539	  The ColdFire CPU cache is set into Write-through mode.
540
541config CACHE_COPYBACK
542	bool "Copy-back"
543	help
544	  The ColdFire CPU cache is set into Copy-back mode.
545endchoice
546endif
547