1# SPDX-License-Identifier: GPL-2.0 2comment "Processor Type" 3 4choice 5 prompt "CPU family support" 6 default M68KCLASSIC if MMU 7 default COLDFIRE if !MMU 8 help 9 The Freescale (was Motorola) M68K family of processors implements 10 the full 68000 processor instruction set. 11 The Freescale ColdFire family of processors is a modern derivative 12 of the 68000 processor family. They are mainly targeted at embedded 13 applications, and are all System-On-Chip (SOC) devices, as opposed 14 to stand alone CPUs. They implement a subset of the original 68000 15 processor instruction set. 16 If you anticipate running this kernel on a computer with a classic 17 MC68xxx processor, select M68KCLASSIC. 18 If you anticipate running this kernel on a computer with a ColdFire 19 processor, select COLDFIRE. 20 21config M68KCLASSIC 22 bool "Classic M68K CPU family support" 23 select HAVE_ARCH_PFN_VALID 24 25config COLDFIRE 26 bool "Coldfire CPU family support" 27 select ARCH_HAVE_CUSTOM_GPIO_H 28 select CPU_HAS_NO_BITFIELDS 29 select CPU_HAS_NO_CAS 30 select CPU_HAS_NO_MULDIV64 31 select GENERIC_CSUM 32 select GPIOLIB 33 select HAVE_LEGACY_CLK 34 35endchoice 36 37if M68KCLASSIC 38 39config M68000 40 bool 41 depends on !MMU 42 select CPU_HAS_NO_BITFIELDS 43 select CPU_HAS_NO_CAS 44 select CPU_HAS_NO_MULDIV64 45 select CPU_HAS_NO_UNALIGNED 46 select GENERIC_CSUM 47 select CPU_NO_EFFICIENT_FFS 48 select HAVE_ARCH_HASH 49 help 50 The Freescale (was Motorola) 68000 CPU is the first generation of 51 the well known M68K family of processors. The CPU core as well as 52 being available as a stand alone CPU was also used in many 53 System-On-Chip devices (eg 68328, 68302, etc). It does not contain 54 a paging MMU. 55 56config M68020 57 bool "68020 support" 58 depends on MMU 59 select FPU 60 select CPU_HAS_ADDRESS_SPACES 61 help 62 If you anticipate running this kernel on a computer with a MC68020 63 processor, say Y. Otherwise, say N. Note that the 68020 requires a 64 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the 65 Sun 3, which provides its own version. 66 67config M68030 68 bool "68030 support" 69 depends on MMU && !MMU_SUN3 70 select FPU 71 select CPU_HAS_ADDRESS_SPACES 72 help 73 If you anticipate running this kernel on a computer with a MC68030 74 processor, say Y. Otherwise, say N. Note that a MC68EC030 will not 75 work, as it does not include an MMU (Memory Management Unit). 76 77config M68040 78 bool "68040 support" 79 depends on MMU && !MMU_SUN3 80 select FPU 81 select CPU_HAS_ADDRESS_SPACES 82 help 83 If you anticipate running this kernel on a computer with a MC68LC040 84 or MC68040 processor, say Y. Otherwise, say N. Note that an 85 MC68EC040 will not work, as it does not include an MMU (Memory 86 Management Unit). 87 88config M68060 89 bool "68060 support" 90 depends on MMU && !MMU_SUN3 91 select FPU 92 select CPU_HAS_ADDRESS_SPACES 93 help 94 If you anticipate running this kernel on a computer with a MC68060 95 processor, say Y. Otherwise, say N. 96 97config M68328 98 bool 99 depends on !MMU 100 select LEGACY_TIMER_TICK 101 select M68000 102 help 103 Motorola 68328 processor support. 104 105config M68EZ328 106 bool 107 depends on !MMU 108 select LEGACY_TIMER_TICK 109 select M68000 110 help 111 Motorola 68EX328 processor support. 112 113config M68VZ328 114 bool 115 depends on !MMU 116 select LEGACY_TIMER_TICK 117 select M68000 118 help 119 Motorola 68VZ328 processor support. 120 121endif # M68KCLASSIC 122 123if COLDFIRE 124 125choice 126 prompt "ColdFire SoC type" 127 default M520x 128 help 129 Select the type of ColdFire System-on-Chip (SoC) that you want 130 to build for. 131 132config M5206 133 bool "MCF5206" 134 depends on !MMU 135 select COLDFIRE_SW_A7 136 select COLDFIRE_TIMERS 137 select HAVE_MBAR 138 select CPU_NO_EFFICIENT_FFS 139 help 140 Motorola ColdFire 5206 processor support. 141 142config M5206e 143 bool "MCF5206e" 144 depends on !MMU 145 select COLDFIRE_SW_A7 146 select COLDFIRE_TIMERS 147 select HAVE_MBAR 148 select CPU_NO_EFFICIENT_FFS 149 help 150 Motorola ColdFire 5206e processor support. 151 152config M520x 153 bool "MCF520x" 154 depends on !MMU 155 select COLDFIRE_PIT_TIMER 156 select HAVE_CACHE_SPLIT 157 help 158 Freescale Coldfire 5207/5208 processor support. 159 160config M523x 161 bool "MCF523x" 162 depends on !MMU 163 select COLDFIRE_PIT_TIMER 164 select HAVE_CACHE_SPLIT 165 select HAVE_IPSBAR 166 help 167 Freescale Coldfire 5230/1/2/4/5 processor support 168 169config M5249 170 bool "MCF5249" 171 depends on !MMU 172 select COLDFIRE_SW_A7 173 select COLDFIRE_TIMERS 174 select HAVE_MBAR 175 select CPU_NO_EFFICIENT_FFS 176 help 177 Motorola ColdFire 5249 processor support. 178 179config M525x 180 bool "MCF525x" 181 depends on !MMU 182 select COLDFIRE_SW_A7 183 select COLDFIRE_TIMERS 184 select HAVE_MBAR 185 select CPU_NO_EFFICIENT_FFS 186 help 187 Freescale (Motorola) Coldfire 5251/5253 processor support. 188 189config M5271 190 bool "MCF5271" 191 depends on !MMU 192 select COLDFIRE_PIT_TIMER 193 select M527x 194 select HAVE_CACHE_SPLIT 195 select HAVE_IPSBAR 196 help 197 Freescale (Motorola) ColdFire 5270/5271 processor support. 198 199config M5272 200 bool "MCF5272" 201 depends on !MMU 202 select COLDFIRE_SW_A7 203 select COLDFIRE_TIMERS 204 select HAVE_MBAR 205 select CPU_NO_EFFICIENT_FFS 206 help 207 Motorola ColdFire 5272 processor support. 208 209config M5275 210 bool "MCF5275" 211 depends on !MMU 212 select COLDFIRE_PIT_TIMER 213 select M527x 214 select HAVE_CACHE_SPLIT 215 select HAVE_IPSBAR 216 help 217 Freescale (Motorola) ColdFire 5274/5275 processor support. 218 219config M528x 220 bool "MCF528x" 221 depends on !MMU 222 select COLDFIRE_PIT_TIMER 223 select HAVE_CACHE_SPLIT 224 select HAVE_IPSBAR 225 help 226 Motorola ColdFire 5280/5282 processor support. 227 228config M5307 229 bool "MCF5307" 230 depends on !MMU 231 select COLDFIRE_TIMERS 232 select COLDFIRE_SW_A7 233 select HAVE_CACHE_CB 234 select HAVE_MBAR 235 select CPU_NO_EFFICIENT_FFS 236 help 237 Motorola ColdFire 5307 processor support. 238 239config M532x 240 bool "MCF532x" 241 depends on !MMU 242 select COLDFIRE_TIMERS 243 select M53xx 244 select HAVE_CACHE_CB 245 help 246 Freescale (Motorola) ColdFire 532x processor support. 247 248config M537x 249 bool "MCF537x" 250 depends on !MMU 251 select COLDFIRE_TIMERS 252 select M53xx 253 select HAVE_CACHE_CB 254 help 255 Freescale ColdFire 537x processor support. 256 257config M5407 258 bool "MCF5407" 259 depends on !MMU 260 select COLDFIRE_SW_A7 261 select COLDFIRE_TIMERS 262 select HAVE_CACHE_CB 263 select HAVE_MBAR 264 select CPU_NO_EFFICIENT_FFS 265 help 266 Motorola ColdFire 5407 processor support. 267 268config M547x 269 bool "MCF547x" 270 select M54xx 271 select COLDFIRE_SLTIMERS 272 select MMU_COLDFIRE if MMU 273 select FPU if MMU 274 select HAVE_CACHE_CB 275 select HAVE_MBAR 276 select CPU_NO_EFFICIENT_FFS 277 help 278 Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. 279 280config M548x 281 bool "MCF548x" 282 select COLDFIRE_SLTIMERS 283 select MMU_COLDFIRE if MMU 284 select FPU if MMU 285 select M54xx 286 select HAVE_CACHE_CB 287 select HAVE_MBAR 288 select CPU_NO_EFFICIENT_FFS 289 help 290 Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. 291 292config M5441x 293 bool "MCF5441x" 294 select COLDFIRE_PIT_TIMER 295 select MMU_COLDFIRE if MMU 296 select HAVE_CACHE_CB 297 help 298 Freescale Coldfire 54410/54415/54416/54417/54418 processor support. 299 300endchoice 301 302config M527x 303 bool 304 305config M53xx 306 bool 307 308config M54xx 309 select HAVE_PCI 310 bool 311 312config COLDFIRE_PIT_TIMER 313 bool 314 315config COLDFIRE_TIMERS 316 bool 317 select LEGACY_TIMER_TICK 318 319config COLDFIRE_SLTIMERS 320 bool 321 select LEGACY_TIMER_TICK 322 323endif # COLDFIRE 324 325 326comment "Processor Specific Options" 327 328config M68KFPU_EMU 329 bool "Math emulation support" 330 depends on MMU 331 help 332 At some point in the future, this will cause floating-point math 333 instructions to be emulated by the kernel on machines that lack a 334 floating-point math coprocessor. Thrill-seekers and chronically 335 sleep-deprived psychotic hacker types can say Y now, everyone else 336 should probably wait a while. 337 338config M68KFPU_EMU_EXTRAPREC 339 bool "Math emulation extra precision" 340 depends on M68KFPU_EMU 341 help 342 The fpu uses normally a few bit more during calculations for 343 correct rounding, the emulator can (often) do the same but this 344 extra calculation can cost quite some time, so you can disable 345 it here. The emulator will then "only" calculate with a 64 bit 346 mantissa and round slightly incorrect, what is more than enough 347 for normal usage. 348 349config M68KFPU_EMU_ONLY 350 bool "Math emulation only kernel" 351 depends on M68KFPU_EMU 352 help 353 This option prevents any floating-point instructions from being 354 compiled into the kernel, thereby the kernel doesn't save any 355 floating point context anymore during task switches, so this 356 kernel will only be usable on machines without a floating-point 357 math coprocessor. This makes the kernel a bit faster as no tests 358 needs to be executed whether a floating-point instruction in the 359 kernel should be executed or not. 360 361config ADVANCED 362 bool "Advanced configuration options" 363 depends on MMU 364 help 365 This gives you access to some advanced options for the CPU. The 366 defaults should be fine for most users, but these options may make 367 it possible for you to improve performance somewhat if you know what 368 you are doing. 369 370 Note that the answer to this question won't directly affect the 371 kernel: saying N will just cause the configurator to skip all 372 the questions about these options. 373 374 Most users should say N to this question. 375 376config RMW_INSNS 377 bool "Use read-modify-write instructions" 378 depends on ADVANCED && !CPU_HAS_NO_CAS 379 help 380 This allows to use certain instructions that work with indivisible 381 read-modify-write bus cycles. While this is faster than the 382 workaround of disabling interrupts, it can conflict with DMA 383 ( = direct memory access) on many Amiga systems, and it is also said 384 to destabilize other machines. It is very likely that this will 385 cause serious problems on any Amiga or Atari Medusa if set. The only 386 configuration where it should work are 68030-based Ataris, where it 387 apparently improves performance. But you've been warned! Unless you 388 really know what you are doing, say N. Try Y only if you're quite 389 adventurous. 390 391config SINGLE_MEMORY_CHUNK 392 bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 393 depends on MMU 394 default y if SUN3 || MMU_COLDFIRE 395 help 396 Ignore all but the first contiguous chunk of physical memory for VM 397 purposes. This will save a few bytes kernel size and may speed up 398 some operations. 399 When this option os set to N, you may want to lower "Maximum zone 400 order" to save memory that could be wasted for unused memory map. 401 Say N if not sure. 402 403config FORCE_MAX_ZONEORDER 404 int "Maximum zone order" if ADVANCED 405 depends on !SINGLE_MEMORY_CHUNK 406 default "11" 407 help 408 The kernel memory allocator divides physically contiguous memory 409 blocks into "zones", where each zone is a power of two number of 410 pages. This option selects the largest power of two that the kernel 411 keeps in the memory allocator. If you need to allocate very large 412 blocks of physically contiguous memory, then you may need to 413 increase this value. 414 415 For systems that have holes in their physical address space this 416 value also defines the minimal size of the hole that allows 417 freeing unused memory map. 418 419 This config option is actually maximum order plus one. For example, 420 a value of 11 means that the largest free memory block is 2^10 pages. 421 422config 060_WRITETHROUGH 423 bool "Use write-through caching for 68060 supervisor accesses" 424 depends on ADVANCED && M68060 425 help 426 The 68060 generally uses copyback caching of recently accessed data. 427 Copyback caching means that memory writes will be held in an on-chip 428 cache and only written back to memory some time later. Saying Y 429 here will force supervisor (kernel) accesses to use writethrough 430 caching. Writethrough caching means that data is written to memory 431 straight away, so that cache and memory data always agree. 432 Writethrough caching is less efficient, but is needed for some 433 drivers on 68060 based systems where the 68060 bus snooping signal 434 is hardwired on. The 53c710 SCSI driver is known to suffer from 435 this problem. 436 437config M68K_L2_CACHE 438 bool 439 depends on MAC 440 default y 441 442config CPU_HAS_NO_BITFIELDS 443 bool 444 445config CPU_HAS_NO_CAS 446 bool 447 448config CPU_HAS_NO_MULDIV64 449 bool 450 451config CPU_HAS_NO_UNALIGNED 452 bool 453 454config CPU_HAS_ADDRESS_SPACES 455 bool 456 select ALTERNATE_USER_ADDRESS_SPACE 457 458config FPU 459 bool 460 461config COLDFIRE_SW_A7 462 bool 463 464config HAVE_CACHE_SPLIT 465 bool 466 467config HAVE_CACHE_CB 468 bool 469 470config HAVE_MBAR 471 bool 472 473config HAVE_IPSBAR 474 bool 475 476config CLOCK_FREQ 477 int "Set the core clock frequency" 478 default "25000000" if M5206 479 default "54000000" if M5206e 480 default "166666666" if M520x 481 default "140000000" if M5249 482 default "150000000" if M527x || M523x 483 default "90000000" if M5307 484 default "50000000" if M5407 485 default "266000000" if M54xx 486 default "66666666" 487 depends on COLDFIRE 488 help 489 Define the CPU clock frequency in use. This is the core clock 490 frequency, it may or may not be the same as the external clock 491 crystal fitted to your board. Some processors have an internal 492 PLL and can have their frequency programmed at run time, others 493 use internal dividers. In general the kernel won't setup a PLL 494 if it is fitted (there are some exceptions). This value will be 495 specific to the exact CPU that you are using. 496 497config OLDMASK 498 bool "Old mask 5307 (1H55J) silicon" 499 depends on M5307 500 help 501 Build support for the older revision ColdFire 5307 silicon. 502 Specifically this is the 1H55J mask revision. 503 504if HAVE_CACHE_SPLIT 505choice 506 prompt "Split Cache Configuration" 507 default CACHE_I 508 509config CACHE_I 510 bool "Instruction" 511 help 512 Use all of the ColdFire CPU cache memory as an instruction cache. 513 514config CACHE_D 515 bool "Data" 516 help 517 Use all of the ColdFire CPU cache memory as a data cache. 518 519config CACHE_BOTH 520 bool "Both" 521 help 522 Split the ColdFire CPU cache, and use half as an instruction cache 523 and half as a data cache. 524endchoice 525endif 526 527if HAVE_CACHE_CB 528choice 529 prompt "Data cache mode" 530 default CACHE_WRITETHRU 531 532config CACHE_WRITETHRU 533 bool "Write-through" 534 help 535 The ColdFire CPU cache is set into Write-through mode. 536 537config CACHE_COPYBACK 538 bool "Copy-back" 539 help 540 The ColdFire CPU cache is set into Copy-back mode. 541endchoice 542endif 543