1# SPDX-License-Identifier: GPL-2.0 2comment "Processor Type" 3 4choice 5 prompt "CPU family support" 6 default M68KCLASSIC if MMU 7 default COLDFIRE if !MMU 8 help 9 The Freescale (was Motorola) M68K family of processors implements 10 the full 68000 processor instruction set. 11 The Freescale ColdFire family of processors is a modern derivative 12 of the 68000 processor family. They are mainly targeted at embedded 13 applications, and are all System-On-Chip (SOC) devices, as opposed 14 to stand alone CPUs. They implement a subset of the original 68000 15 processor instruction set. 16 If you anticipate running this kernel on a computer with a classic 17 MC68xxx processor, select M68KCLASSIC. 18 If you anticipate running this kernel on a computer with a ColdFire 19 processor, select COLDFIRE. 20 21config M68KCLASSIC 22 bool "Classic M68K CPU family support" 23 select HAVE_ARCH_PFN_VALID 24 25config COLDFIRE 26 bool "Coldfire CPU family support" 27 select CPU_HAS_NO_BITFIELDS 28 select CPU_HAS_NO_CAS 29 select CPU_HAS_NO_MULDIV64 30 select GENERIC_CSUM 31 select GPIOLIB 32 select HAVE_LEGACY_CLK 33 34endchoice 35 36if M68KCLASSIC 37 38config M68000 39 def_bool y 40 depends on !MMU 41 select CPU_HAS_NO_BITFIELDS 42 select CPU_HAS_NO_CAS 43 select CPU_HAS_NO_MULDIV64 44 select CPU_HAS_NO_UNALIGNED 45 select GENERIC_CSUM 46 select CPU_NO_EFFICIENT_FFS 47 select HAVE_ARCH_HASH 48 select LEGACY_TIMER_TICK 49 help 50 The Freescale (was Motorola) 68000 CPU is the first generation of 51 the well known M68K family of processors. The CPU core as well as 52 being available as a stand alone CPU was also used in many 53 System-On-Chip devices (eg 68328, 68302, etc). It does not contain 54 a paging MMU. 55 56config M68020 57 bool "68020 support" 58 depends on MMU 59 select FPU 60 select CPU_HAS_ADDRESS_SPACES 61 help 62 If you anticipate running this kernel on a computer with a MC68020 63 processor, say Y. Otherwise, say N. Note that the 68020 requires a 64 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the 65 Sun 3, which provides its own version. 66 67config M68030 68 bool "68030 support" 69 depends on MMU && !MMU_SUN3 70 select FPU 71 select CPU_HAS_ADDRESS_SPACES 72 help 73 If you anticipate running this kernel on a computer with a MC68030 74 processor, say Y. Otherwise, say N. Note that a MC68EC030 will not 75 work, as it does not include an MMU (Memory Management Unit). 76 77config M68040 78 bool "68040 support" 79 depends on MMU && !MMU_SUN3 80 select FPU 81 select CPU_HAS_ADDRESS_SPACES 82 help 83 If you anticipate running this kernel on a computer with a MC68LC040 84 or MC68040 processor, say Y. Otherwise, say N. Note that an 85 MC68EC040 will not work, as it does not include an MMU (Memory 86 Management Unit). 87 88config M68060 89 bool "68060 support" 90 depends on MMU && !MMU_SUN3 91 select FPU 92 select CPU_HAS_ADDRESS_SPACES 93 help 94 If you anticipate running this kernel on a computer with a MC68060 95 processor, say Y. Otherwise, say N. 96 97config M68328 98 bool 99 depends on !MMU 100 select M68000 101 help 102 Motorola 68328 processor support. 103 104config M68EZ328 105 bool 106 depends on !MMU 107 select M68000 108 help 109 Motorola 68EX328 processor support. 110 111config M68VZ328 112 bool 113 depends on !MMU 114 select M68000 115 help 116 Motorola 68VZ328 processor support. 117 118endif # M68KCLASSIC 119 120if COLDFIRE 121 122choice 123 prompt "ColdFire SoC type" 124 default M520x 125 help 126 Select the type of ColdFire System-on-Chip (SoC) that you want 127 to build for. 128 129config M5206 130 bool "MCF5206" 131 depends on !MMU 132 select COLDFIRE_SW_A7 133 select COLDFIRE_TIMERS 134 select HAVE_MBAR 135 select CPU_NO_EFFICIENT_FFS 136 help 137 Motorola ColdFire 5206 processor support. 138 139config M5206e 140 bool "MCF5206e" 141 depends on !MMU 142 select COLDFIRE_SW_A7 143 select COLDFIRE_TIMERS 144 select HAVE_MBAR 145 select CPU_NO_EFFICIENT_FFS 146 help 147 Motorola ColdFire 5206e processor support. 148 149config M520x 150 bool "MCF520x" 151 depends on !MMU 152 select COLDFIRE_PIT_TIMER 153 select HAVE_CACHE_SPLIT 154 help 155 Freescale Coldfire 5207/5208 processor support. 156 157config M523x 158 bool "MCF523x" 159 depends on !MMU 160 select COLDFIRE_PIT_TIMER 161 select HAVE_CACHE_SPLIT 162 select HAVE_IPSBAR 163 help 164 Freescale Coldfire 5230/1/2/4/5 processor support 165 166config M5249 167 bool "MCF5249" 168 depends on !MMU 169 select COLDFIRE_SW_A7 170 select COLDFIRE_TIMERS 171 select HAVE_MBAR 172 select CPU_NO_EFFICIENT_FFS 173 help 174 Motorola ColdFire 5249 processor support. 175 176config M525x 177 bool "MCF525x" 178 depends on !MMU 179 select COLDFIRE_SW_A7 180 select COLDFIRE_TIMERS 181 select HAVE_MBAR 182 select CPU_NO_EFFICIENT_FFS 183 help 184 Freescale (Motorola) Coldfire 5251/5253 processor support. 185 186config M5271 187 bool "MCF5271" 188 depends on !MMU 189 select COLDFIRE_PIT_TIMER 190 select M527x 191 select HAVE_CACHE_SPLIT 192 select HAVE_IPSBAR 193 help 194 Freescale (Motorola) ColdFire 5270/5271 processor support. 195 196config M5272 197 bool "MCF5272" 198 depends on !MMU 199 select COLDFIRE_SW_A7 200 select COLDFIRE_TIMERS 201 select HAVE_MBAR 202 select CPU_NO_EFFICIENT_FFS 203 help 204 Motorola ColdFire 5272 processor support. 205 206config M5275 207 bool "MCF5275" 208 depends on !MMU 209 select COLDFIRE_PIT_TIMER 210 select M527x 211 select HAVE_CACHE_SPLIT 212 select HAVE_IPSBAR 213 help 214 Freescale (Motorola) ColdFire 5274/5275 processor support. 215 216config M528x 217 bool "MCF528x" 218 depends on !MMU 219 select COLDFIRE_PIT_TIMER 220 select HAVE_CACHE_SPLIT 221 select HAVE_IPSBAR 222 help 223 Motorola ColdFire 5280/5282 processor support. 224 225config M5307 226 bool "MCF5307" 227 depends on !MMU 228 select COLDFIRE_TIMERS 229 select COLDFIRE_SW_A7 230 select HAVE_CACHE_CB 231 select HAVE_MBAR 232 select CPU_NO_EFFICIENT_FFS 233 help 234 Motorola ColdFire 5307 processor support. 235 236config M532x 237 bool "MCF532x" 238 depends on !MMU 239 select COLDFIRE_TIMERS 240 select M53xx 241 select HAVE_CACHE_CB 242 help 243 Freescale (Motorola) ColdFire 532x processor support. 244 245config M537x 246 bool "MCF537x" 247 depends on !MMU 248 select COLDFIRE_TIMERS 249 select M53xx 250 select HAVE_CACHE_CB 251 help 252 Freescale ColdFire 537x processor support. 253 254config M5407 255 bool "MCF5407" 256 depends on !MMU 257 select COLDFIRE_SW_A7 258 select COLDFIRE_TIMERS 259 select HAVE_CACHE_CB 260 select HAVE_MBAR 261 select CPU_NO_EFFICIENT_FFS 262 help 263 Motorola ColdFire 5407 processor support. 264 265config M547x 266 bool "MCF547x" 267 select M54xx 268 select COLDFIRE_SLTIMERS 269 select MMU_COLDFIRE if MMU 270 select FPU if MMU 271 select HAVE_CACHE_CB 272 select HAVE_MBAR 273 select CPU_NO_EFFICIENT_FFS 274 help 275 Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. 276 277config M548x 278 bool "MCF548x" 279 select COLDFIRE_SLTIMERS 280 select MMU_COLDFIRE if MMU 281 select FPU if MMU 282 select M54xx 283 select HAVE_CACHE_CB 284 select HAVE_MBAR 285 select CPU_NO_EFFICIENT_FFS 286 help 287 Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. 288 289config M5441x 290 bool "MCF5441x" 291 select COLDFIRE_PIT_TIMER 292 select MMU_COLDFIRE if MMU 293 select HAVE_CACHE_CB 294 help 295 Freescale Coldfire 54410/54415/54416/54417/54418 processor support. 296 297endchoice 298 299config M527x 300 bool 301 302config M53xx 303 bool 304 305config M54xx 306 select HAVE_PCI 307 bool 308 309config COLDFIRE_PIT_TIMER 310 bool 311 312config COLDFIRE_TIMERS 313 bool 314 select LEGACY_TIMER_TICK 315 316config COLDFIRE_SLTIMERS 317 bool 318 select LEGACY_TIMER_TICK 319 320endif # COLDFIRE 321 322comment "Processor Specific Options" 323 324config M68KFPU_EMU 325 bool "Math emulation support" 326 depends on M68KCLASSIC && FPU 327 help 328 At some point in the future, this will cause floating-point math 329 instructions to be emulated by the kernel on machines that lack a 330 floating-point math coprocessor. Thrill-seekers and chronically 331 sleep-deprived psychotic hacker types can say Y now, everyone else 332 should probably wait a while. 333 334config M68KFPU_EMU_EXTRAPREC 335 bool "Math emulation extra precision" 336 depends on M68KFPU_EMU 337 help 338 The fpu uses normally a few bit more during calculations for 339 correct rounding, the emulator can (often) do the same but this 340 extra calculation can cost quite some time, so you can disable 341 it here. The emulator will then "only" calculate with a 64 bit 342 mantissa and round slightly incorrect, what is more than enough 343 for normal usage. 344 345config M68KFPU_EMU_ONLY 346 bool "Math emulation only kernel" 347 depends on M68KFPU_EMU 348 help 349 This option prevents any floating-point instructions from being 350 compiled into the kernel, thereby the kernel doesn't save any 351 floating point context anymore during task switches, so this 352 kernel will only be usable on machines without a floating-point 353 math coprocessor. This makes the kernel a bit faster as no tests 354 needs to be executed whether a floating-point instruction in the 355 kernel should be executed or not. 356 357config ADVANCED 358 bool "Advanced configuration options" 359 depends on MMU 360 help 361 This gives you access to some advanced options for the CPU. The 362 defaults should be fine for most users, but these options may make 363 it possible for you to improve performance somewhat if you know what 364 you are doing. 365 366 Note that the answer to this question won't directly affect the 367 kernel: saying N will just cause the configurator to skip all 368 the questions about these options. 369 370 Most users should say N to this question. 371 372config RMW_INSNS 373 bool "Use read-modify-write instructions" 374 depends on ADVANCED && !CPU_HAS_NO_CAS 375 help 376 This allows to use certain instructions that work with indivisible 377 read-modify-write bus cycles. While this is faster than the 378 workaround of disabling interrupts, it can conflict with DMA 379 ( = direct memory access) on many Amiga systems, and it is also said 380 to destabilize other machines. It is very likely that this will 381 cause serious problems on any Amiga or Atari Medusa if set. The only 382 configuration where it should work are 68030-based Ataris, where it 383 apparently improves performance. But you've been warned! Unless you 384 really know what you are doing, say N. Try Y only if you're quite 385 adventurous. 386 387config SINGLE_MEMORY_CHUNK 388 bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 389 depends on MMU 390 default y if SUN3 || MMU_COLDFIRE 391 help 392 Ignore all but the first contiguous chunk of physical memory for VM 393 purposes. This will save a few bytes kernel size and may speed up 394 some operations. 395 When this option os set to N, you may want to lower "Maximum zone 396 order" to save memory that could be wasted for unused memory map. 397 Say N if not sure. 398 399config ARCH_FORCE_MAX_ORDER 400 int "Order of maximal physically contiguous allocations" if ADVANCED 401 depends on !SINGLE_MEMORY_CHUNK 402 default "10" 403 help 404 The kernel page allocator limits the size of maximal physically 405 contiguous allocations. The limit is called MAX_ORDER and it 406 defines the maximal power of two of number of pages that can be 407 allocated as a single contiguous block. This option allows 408 overriding the default setting when ability to allocate very 409 large blocks of physically contiguous memory is required. 410 411 For systems that have holes in their physical address space this 412 value also defines the minimal size of the hole that allows 413 freeing unused memory map. 414 415 Don't change if unsure. 416 417config 060_WRITETHROUGH 418 bool "Use write-through caching for 68060 supervisor accesses" 419 depends on ADVANCED && M68060 420 help 421 The 68060 generally uses copyback caching of recently accessed data. 422 Copyback caching means that memory writes will be held in an on-chip 423 cache and only written back to memory some time later. Saying Y 424 here will force supervisor (kernel) accesses to use writethrough 425 caching. Writethrough caching means that data is written to memory 426 straight away, so that cache and memory data always agree. 427 Writethrough caching is less efficient, but is needed for some 428 drivers on 68060 based systems where the 68060 bus snooping signal 429 is hardwired on. The 53c710 SCSI driver is known to suffer from 430 this problem. 431 432config M68K_L2_CACHE 433 bool 434 depends on MAC 435 default y 436 437config CPU_HAS_NO_BITFIELDS 438 bool 439 440config CPU_HAS_NO_CAS 441 bool 442 443config CPU_HAS_NO_MULDIV64 444 bool 445 446config CPU_HAS_NO_UNALIGNED 447 bool 448 449config CPU_HAS_ADDRESS_SPACES 450 bool 451 select ALTERNATE_USER_ADDRESS_SPACE 452 453config FPU 454 bool 455 456config COLDFIRE_SW_A7 457 bool 458 459config HAVE_CACHE_SPLIT 460 bool 461 462config HAVE_CACHE_CB 463 bool 464 465config HAVE_MBAR 466 bool 467 468config HAVE_IPSBAR 469 bool 470 471config CLOCK_FREQ 472 int "Set the core clock frequency" 473 default "25000000" if M5206 474 default "54000000" if M5206e 475 default "166666666" if M520x 476 default "140000000" if M5249 477 default "150000000" if M527x || M523x 478 default "90000000" if M5307 479 default "50000000" if M5407 480 default "266000000" if M54xx 481 default "66666666" 482 depends on COLDFIRE 483 help 484 Define the CPU clock frequency in use. This is the core clock 485 frequency, it may or may not be the same as the external clock 486 crystal fitted to your board. Some processors have an internal 487 PLL and can have their frequency programmed at run time, others 488 use internal dividers. In general the kernel won't setup a PLL 489 if it is fitted (there are some exceptions). This value will be 490 specific to the exact CPU that you are using. 491 492config OLDMASK 493 bool "Old mask 5307 (1H55J) silicon" 494 depends on M5307 495 help 496 Build support for the older revision ColdFire 5307 silicon. 497 Specifically this is the 1H55J mask revision. 498 499if HAVE_CACHE_SPLIT 500choice 501 prompt "Split Cache Configuration" 502 default CACHE_I 503 504config CACHE_I 505 bool "Instruction" 506 help 507 Use all of the ColdFire CPU cache memory as an instruction cache. 508 509config CACHE_D 510 bool "Data" 511 help 512 Use all of the ColdFire CPU cache memory as a data cache. 513 514config CACHE_BOTH 515 bool "Both" 516 help 517 Split the ColdFire CPU cache, and use half as an instruction cache 518 and half as a data cache. 519endchoice 520endif # HAVE_CACHE_SPLIT 521 522if HAVE_CACHE_CB 523choice 524 prompt "Data cache mode" 525 default CACHE_WRITETHRU 526 527config CACHE_WRITETHRU 528 bool "Write-through" 529 help 530 The ColdFire CPU cache is set into Write-through mode. 531 532config CACHE_COPYBACK 533 bool "Copy-back" 534 help 535 The ColdFire CPU cache is set into Copy-back mode. 536endchoice 537endif # HAVE_CACHE_CB 538