1# SPDX-License-Identifier: GPL-2.0 2comment "Processor Type" 3 4choice 5 prompt "CPU family support" 6 default M68KCLASSIC if MMU 7 default COLDFIRE if !MMU 8 help 9 The Freescale (was Motorola) M68K family of processors implements 10 the full 68000 processor instruction set. 11 The Freescale ColdFire family of processors is a modern derivative 12 of the 68000 processor family. They are mainly targeted at embedded 13 applications, and are all System-On-Chip (SOC) devices, as opposed 14 to stand alone CPUs. They implement a subset of the original 68000 15 processor instruction set. 16 If you anticipate running this kernel on a computer with a classic 17 MC68xxx processor, select M68KCLASSIC. 18 If you anticipate running this kernel on a computer with a ColdFire 19 processor, select COLDFIRE. 20 21config M68KCLASSIC 22 bool "Classic M68K CPU family support" 23 select HAVE_ARCH_PFN_VALID 24 25config COLDFIRE 26 bool "Coldfire CPU family support" 27 select ARCH_HAVE_CUSTOM_GPIO_H 28 select CPU_HAS_NO_BITFIELDS 29 select CPU_HAS_NO_MULDIV64 30 select GENERIC_CSUM 31 select GPIOLIB 32 select HAVE_LEGACY_CLK 33 34endchoice 35 36if M68KCLASSIC 37 38config M68000 39 bool 40 depends on !MMU 41 select CPU_HAS_NO_BITFIELDS 42 select CPU_HAS_NO_MULDIV64 43 select CPU_HAS_NO_UNALIGNED 44 select GENERIC_CSUM 45 select CPU_NO_EFFICIENT_FFS 46 select HAVE_ARCH_HASH 47 help 48 The Freescale (was Motorola) 68000 CPU is the first generation of 49 the well known M68K family of processors. The CPU core as well as 50 being available as a stand alone CPU was also used in many 51 System-On-Chip devices (eg 68328, 68302, etc). It does not contain 52 a paging MMU. 53 54config MCPU32 55 bool 56 select CPU_HAS_NO_BITFIELDS 57 select CPU_HAS_NO_UNALIGNED 58 select CPU_NO_EFFICIENT_FFS 59 help 60 The Freescale (was then Motorola) CPU32 is a CPU core that is 61 based on the 68020 processor. For the most part it is used in 62 System-On-Chip parts, and does not contain a paging MMU. 63 64config M68020 65 bool "68020 support" 66 depends on MMU 67 select FPU 68 select CPU_HAS_ADDRESS_SPACES 69 help 70 If you anticipate running this kernel on a computer with a MC68020 71 processor, say Y. Otherwise, say N. Note that the 68020 requires a 72 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the 73 Sun 3, which provides its own version. 74 75config M68030 76 bool "68030 support" 77 depends on MMU && !MMU_SUN3 78 select FPU 79 select CPU_HAS_ADDRESS_SPACES 80 help 81 If you anticipate running this kernel on a computer with a MC68030 82 processor, say Y. Otherwise, say N. Note that a MC68EC030 will not 83 work, as it does not include an MMU (Memory Management Unit). 84 85config M68040 86 bool "68040 support" 87 depends on MMU && !MMU_SUN3 88 select FPU 89 select CPU_HAS_ADDRESS_SPACES 90 help 91 If you anticipate running this kernel on a computer with a MC68LC040 92 or MC68040 processor, say Y. Otherwise, say N. Note that an 93 MC68EC040 will not work, as it does not include an MMU (Memory 94 Management Unit). 95 96config M68060 97 bool "68060 support" 98 depends on MMU && !MMU_SUN3 99 select FPU 100 select CPU_HAS_ADDRESS_SPACES 101 help 102 If you anticipate running this kernel on a computer with a MC68060 103 processor, say Y. Otherwise, say N. 104 105config M68328 106 bool 107 depends on !MMU 108 select LEGACY_TIMER_TICK 109 select M68000 110 help 111 Motorola 68328 processor support. 112 113config M68EZ328 114 bool 115 depends on !MMU 116 select LEGACY_TIMER_TICK 117 select M68000 118 help 119 Motorola 68EX328 processor support. 120 121config M68VZ328 122 bool 123 depends on !MMU 124 select LEGACY_TIMER_TICK 125 select M68000 126 help 127 Motorola 68VZ328 processor support. 128 129endif # M68KCLASSIC 130 131if COLDFIRE 132 133choice 134 prompt "ColdFire SoC type" 135 default M520x 136 help 137 Select the type of ColdFire System-on-Chip (SoC) that you want 138 to build for. 139 140config M5206 141 bool "MCF5206" 142 depends on !MMU 143 select COLDFIRE_SW_A7 144 select COLDFIRE_TIMERS 145 select HAVE_MBAR 146 select CPU_NO_EFFICIENT_FFS 147 help 148 Motorola ColdFire 5206 processor support. 149 150config M5206e 151 bool "MCF5206e" 152 depends on !MMU 153 select COLDFIRE_SW_A7 154 select COLDFIRE_TIMERS 155 select HAVE_MBAR 156 select CPU_NO_EFFICIENT_FFS 157 help 158 Motorola ColdFire 5206e processor support. 159 160config M520x 161 bool "MCF520x" 162 depends on !MMU 163 select COLDFIRE_PIT_TIMER 164 select HAVE_CACHE_SPLIT 165 help 166 Freescale Coldfire 5207/5208 processor support. 167 168config M523x 169 bool "MCF523x" 170 depends on !MMU 171 select COLDFIRE_PIT_TIMER 172 select HAVE_CACHE_SPLIT 173 select HAVE_IPSBAR 174 help 175 Freescale Coldfire 5230/1/2/4/5 processor support 176 177config M5249 178 bool "MCF5249" 179 depends on !MMU 180 select COLDFIRE_SW_A7 181 select COLDFIRE_TIMERS 182 select HAVE_MBAR 183 select CPU_NO_EFFICIENT_FFS 184 help 185 Motorola ColdFire 5249 processor support. 186 187config M525x 188 bool "MCF525x" 189 depends on !MMU 190 select COLDFIRE_SW_A7 191 select COLDFIRE_TIMERS 192 select HAVE_MBAR 193 select CPU_NO_EFFICIENT_FFS 194 help 195 Freescale (Motorola) Coldfire 5251/5253 processor support. 196 197config M5271 198 bool "MCF5271" 199 depends on !MMU 200 select COLDFIRE_PIT_TIMER 201 select M527x 202 select HAVE_CACHE_SPLIT 203 select HAVE_IPSBAR 204 help 205 Freescale (Motorola) ColdFire 5270/5271 processor support. 206 207config M5272 208 bool "MCF5272" 209 depends on !MMU 210 select COLDFIRE_SW_A7 211 select COLDFIRE_TIMERS 212 select HAVE_MBAR 213 select CPU_NO_EFFICIENT_FFS 214 help 215 Motorola ColdFire 5272 processor support. 216 217config M5275 218 bool "MCF5275" 219 depends on !MMU 220 select COLDFIRE_PIT_TIMER 221 select M527x 222 select HAVE_CACHE_SPLIT 223 select HAVE_IPSBAR 224 help 225 Freescale (Motorola) ColdFire 5274/5275 processor support. 226 227config M528x 228 bool "MCF528x" 229 depends on !MMU 230 select COLDFIRE_PIT_TIMER 231 select HAVE_CACHE_SPLIT 232 select HAVE_IPSBAR 233 help 234 Motorola ColdFire 5280/5282 processor support. 235 236config M5307 237 bool "MCF5307" 238 depends on !MMU 239 select COLDFIRE_TIMERS 240 select COLDFIRE_SW_A7 241 select HAVE_CACHE_CB 242 select HAVE_MBAR 243 select CPU_NO_EFFICIENT_FFS 244 help 245 Motorola ColdFire 5307 processor support. 246 247config M532x 248 bool "MCF532x" 249 depends on !MMU 250 select COLDFIRE_TIMERS 251 select M53xx 252 select HAVE_CACHE_CB 253 help 254 Freescale (Motorola) ColdFire 532x processor support. 255 256config M537x 257 bool "MCF537x" 258 depends on !MMU 259 select COLDFIRE_TIMERS 260 select M53xx 261 select HAVE_CACHE_CB 262 help 263 Freescale ColdFire 537x processor support. 264 265config M5407 266 bool "MCF5407" 267 depends on !MMU 268 select COLDFIRE_SW_A7 269 select COLDFIRE_TIMERS 270 select HAVE_CACHE_CB 271 select HAVE_MBAR 272 select CPU_NO_EFFICIENT_FFS 273 help 274 Motorola ColdFire 5407 processor support. 275 276config M547x 277 bool "MCF547x" 278 select M54xx 279 select COLDFIRE_SLTIMERS 280 select MMU_COLDFIRE if MMU 281 select FPU if MMU 282 select HAVE_CACHE_CB 283 select HAVE_MBAR 284 select CPU_NO_EFFICIENT_FFS 285 help 286 Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. 287 288config M548x 289 bool "MCF548x" 290 select COLDFIRE_SLTIMERS 291 select MMU_COLDFIRE if MMU 292 select FPU if MMU 293 select M54xx 294 select HAVE_CACHE_CB 295 select HAVE_MBAR 296 select CPU_NO_EFFICIENT_FFS 297 help 298 Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. 299 300config M5441x 301 bool "MCF5441x" 302 select COLDFIRE_PIT_TIMER 303 select MMU_COLDFIRE if MMU 304 select HAVE_CACHE_CB 305 help 306 Freescale Coldfire 54410/54415/54416/54417/54418 processor support. 307 308endchoice 309 310config M527x 311 bool 312 313config M53xx 314 bool 315 316config M54xx 317 select HAVE_PCI 318 bool 319 320config COLDFIRE_PIT_TIMER 321 bool 322 323config COLDFIRE_TIMERS 324 bool 325 select LEGACY_TIMER_TICK 326 327config COLDFIRE_SLTIMERS 328 bool 329 select LEGACY_TIMER_TICK 330 331endif # COLDFIRE 332 333 334comment "Processor Specific Options" 335 336config M68KFPU_EMU 337 bool "Math emulation support" 338 depends on MMU 339 help 340 At some point in the future, this will cause floating-point math 341 instructions to be emulated by the kernel on machines that lack a 342 floating-point math coprocessor. Thrill-seekers and chronically 343 sleep-deprived psychotic hacker types can say Y now, everyone else 344 should probably wait a while. 345 346config M68KFPU_EMU_EXTRAPREC 347 bool "Math emulation extra precision" 348 depends on M68KFPU_EMU 349 help 350 The fpu uses normally a few bit more during calculations for 351 correct rounding, the emulator can (often) do the same but this 352 extra calculation can cost quite some time, so you can disable 353 it here. The emulator will then "only" calculate with a 64 bit 354 mantissa and round slightly incorrect, what is more than enough 355 for normal usage. 356 357config M68KFPU_EMU_ONLY 358 bool "Math emulation only kernel" 359 depends on M68KFPU_EMU 360 help 361 This option prevents any floating-point instructions from being 362 compiled into the kernel, thereby the kernel doesn't save any 363 floating point context anymore during task switches, so this 364 kernel will only be usable on machines without a floating-point 365 math coprocessor. This makes the kernel a bit faster as no tests 366 needs to be executed whether a floating-point instruction in the 367 kernel should be executed or not. 368 369config ADVANCED 370 bool "Advanced configuration options" 371 depends on MMU 372 help 373 This gives you access to some advanced options for the CPU. The 374 defaults should be fine for most users, but these options may make 375 it possible for you to improve performance somewhat if you know what 376 you are doing. 377 378 Note that the answer to this question won't directly affect the 379 kernel: saying N will just cause the configurator to skip all 380 the questions about these options. 381 382 Most users should say N to this question. 383 384config RMW_INSNS 385 bool "Use read-modify-write instructions" 386 depends on ADVANCED 387 help 388 This allows to use certain instructions that work with indivisible 389 read-modify-write bus cycles. While this is faster than the 390 workaround of disabling interrupts, it can conflict with DMA 391 ( = direct memory access) on many Amiga systems, and it is also said 392 to destabilize other machines. It is very likely that this will 393 cause serious problems on any Amiga or Atari Medusa if set. The only 394 configuration where it should work are 68030-based Ataris, where it 395 apparently improves performance. But you've been warned! Unless you 396 really know what you are doing, say N. Try Y only if you're quite 397 adventurous. 398 399config SINGLE_MEMORY_CHUNK 400 bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 401 depends on MMU 402 default y if SUN3 || MMU_COLDFIRE 403 help 404 Ignore all but the first contiguous chunk of physical memory for VM 405 purposes. This will save a few bytes kernel size and may speed up 406 some operations. 407 When this option os set to N, you may want to lower "Maximum zone 408 order" to save memory that could be wasted for unused memory map. 409 Say N if not sure. 410 411config ARCH_DISCONTIGMEM_ENABLE 412 depends on BROKEN 413 def_bool MMU && !SINGLE_MEMORY_CHUNK 414 415config FORCE_MAX_ZONEORDER 416 int "Maximum zone order" if ADVANCED 417 depends on !SINGLE_MEMORY_CHUNK 418 default "11" 419 help 420 The kernel memory allocator divides physically contiguous memory 421 blocks into "zones", where each zone is a power of two number of 422 pages. This option selects the largest power of two that the kernel 423 keeps in the memory allocator. If you need to allocate very large 424 blocks of physically contiguous memory, then you may need to 425 increase this value. 426 427 For systems that have holes in their physical address space this 428 value also defines the minimal size of the hole that allows 429 freeing unused memory map. 430 431 This config option is actually maximum order plus one. For example, 432 a value of 11 means that the largest free memory block is 2^10 pages. 433 434config 060_WRITETHROUGH 435 bool "Use write-through caching for 68060 supervisor accesses" 436 depends on ADVANCED && M68060 437 help 438 The 68060 generally uses copyback caching of recently accessed data. 439 Copyback caching means that memory writes will be held in an on-chip 440 cache and only written back to memory some time later. Saying Y 441 here will force supervisor (kernel) accesses to use writethrough 442 caching. Writethrough caching means that data is written to memory 443 straight away, so that cache and memory data always agree. 444 Writethrough caching is less efficient, but is needed for some 445 drivers on 68060 based systems where the 68060 bus snooping signal 446 is hardwired on. The 53c710 SCSI driver is known to suffer from 447 this problem. 448 449config M68K_L2_CACHE 450 bool 451 depends on MAC 452 default y 453 454config NODES_SHIFT 455 int 456 default "3" 457 depends on DISCONTIGMEM 458 459config CPU_HAS_NO_BITFIELDS 460 bool 461 462config CPU_HAS_NO_MULDIV64 463 bool 464 465config CPU_HAS_NO_UNALIGNED 466 bool 467 468config CPU_HAS_ADDRESS_SPACES 469 bool 470 471config FPU 472 bool 473 474config COLDFIRE_SW_A7 475 bool 476 477config HAVE_CACHE_SPLIT 478 bool 479 480config HAVE_CACHE_CB 481 bool 482 483config HAVE_MBAR 484 bool 485 486config HAVE_IPSBAR 487 bool 488 489config CLOCK_FREQ 490 int "Set the core clock frequency" 491 default "25000000" if M5206 492 default "54000000" if M5206e 493 default "166666666" if M520x 494 default "140000000" if M5249 495 default "150000000" if M527x || M523x 496 default "90000000" if M5307 497 default "50000000" if M5407 498 default "266000000" if M54xx 499 default "66666666" 500 depends on COLDFIRE 501 help 502 Define the CPU clock frequency in use. This is the core clock 503 frequency, it may or may not be the same as the external clock 504 crystal fitted to your board. Some processors have an internal 505 PLL and can have their frequency programmed at run time, others 506 use internal dividers. In general the kernel won't setup a PLL 507 if it is fitted (there are some exceptions). This value will be 508 specific to the exact CPU that you are using. 509 510config OLDMASK 511 bool "Old mask 5307 (1H55J) silicon" 512 depends on M5307 513 help 514 Build support for the older revision ColdFire 5307 silicon. 515 Specifically this is the 1H55J mask revision. 516 517if HAVE_CACHE_SPLIT 518choice 519 prompt "Split Cache Configuration" 520 default CACHE_I 521 522config CACHE_I 523 bool "Instruction" 524 help 525 Use all of the ColdFire CPU cache memory as an instruction cache. 526 527config CACHE_D 528 bool "Data" 529 help 530 Use all of the ColdFire CPU cache memory as a data cache. 531 532config CACHE_BOTH 533 bool "Both" 534 help 535 Split the ColdFire CPU cache, and use half as an instruction cache 536 and half as a data cache. 537endchoice 538endif 539 540if HAVE_CACHE_CB 541choice 542 prompt "Data cache mode" 543 default CACHE_WRITETHRU 544 545config CACHE_WRITETHRU 546 bool "Write-through" 547 help 548 The ColdFire CPU cache is set into Write-through mode. 549 550config CACHE_COPYBACK 551 bool "Copy-back" 552 help 553 The ColdFire CPU cache is set into Copy-back mode. 554endchoice 555endif 556 557