1/* 2 * McKinley-optimized version of copy_page(). 3 * 4 * Copyright (C) 2002 Hewlett-Packard Co 5 * David Mosberger <davidm@hpl.hp.com> 6 * 7 * Inputs: 8 * in0: address of target page 9 * in1: address of source page 10 * Output: 11 * no return value 12 * 13 * General idea: 14 * - use regular loads and stores to prefetch data to avoid consuming M-slot just for 15 * lfetches => good for in-cache performance 16 * - avoid l2 bank-conflicts by not storing into the same 16-byte bank within a single 17 * cycle 18 * 19 * Principle of operation: 20 * First, note that L1 has a line-size of 64 bytes and L2 a line-size of 128 bytes. 21 * To avoid secondary misses in L2, we prefetch both source and destination with a line-size 22 * of 128 bytes. When both of these lines are in the L2 and the first half of the 23 * source line is in L1, we start copying the remaining words. The second half of the 24 * source line is prefetched in an earlier iteration, so that by the time we start 25 * accessing it, it's also present in the L1. 26 * 27 * We use a software-pipelined loop to control the overall operation. The pipeline 28 * has 2*PREFETCH_DIST+K stages. The first PREFETCH_DIST stages are used for prefetching 29 * source cache-lines. The second PREFETCH_DIST stages are used for prefetching destination 30 * cache-lines, the last K stages are used to copy the cache-line words not copied by 31 * the prefetches. The four relevant points in the pipelined are called A, B, C, D: 32 * p[A] is TRUE if a source-line should be prefetched, p[B] is TRUE if a destination-line 33 * should be prefetched, p[C] is TRUE if the second half of an L2 line should be brought 34 * into L1D and p[D] is TRUE if a cacheline needs to be copied. 35 * 36 * This all sounds very complicated, but thanks to the modulo-scheduled loop support, 37 * the resulting code is very regular and quite easy to follow (once you get the idea). 38 * 39 * As a secondary optimization, the first 2*PREFETCH_DIST iterations are implemented 40 * as the separate .prefetch_loop. Logically, this loop performs exactly like the 41 * main-loop (.line_copy), but has all known-to-be-predicated-off instructions removed, 42 * so that each loop iteration is faster (again, good for cached case). 43 * 44 * When reading the code, it helps to keep the following picture in mind: 45 * 46 * word 0 word 1 47 * +------+------+--- 48 * | v[x] | t1 | ^ 49 * | t2 | t3 | | 50 * | t4 | t5 | | 51 * | t6 | t7 | | 128 bytes 52 * | n[y] | t9 | | (L2 cache line) 53 * | t10 | t11 | | 54 * | t12 | t13 | | 55 * | t14 | t15 | v 56 * +------+------+--- 57 * 58 * Here, v[x] is copied by the (memory) prefetch. n[y] is loaded at p[C] 59 * to fetch the second-half of the L2 cache line into L1, and the tX words are copied in 60 * an order that avoids bank conflicts. 61 */ 62#include <asm/asmmacro.h> 63#include <asm/page.h> 64#include <asm/export.h> 65 66#define PREFETCH_DIST 8 // McKinley sustains 16 outstanding L2 misses (8 ld, 8 st) 67 68#define src0 r2 69#define src1 r3 70#define dst0 r9 71#define dst1 r10 72#define src_pre_mem r11 73#define dst_pre_mem r14 74#define src_pre_l2 r15 75#define dst_pre_l2 r16 76#define t1 r17 77#define t2 r18 78#define t3 r19 79#define t4 r20 80#define t5 t1 // alias! 81#define t6 t2 // alias! 82#define t7 t3 // alias! 83#define t9 t5 // alias! 84#define t10 t4 // alias! 85#define t11 t7 // alias! 86#define t12 t6 // alias! 87#define t14 t10 // alias! 88#define t13 r21 89#define t15 r22 90 91#define saved_lc r23 92#define saved_pr r24 93 94#define A 0 95#define B (PREFETCH_DIST) 96#define C (B + PREFETCH_DIST) 97#define D (C + 3) 98#define N (D + 1) 99#define Nrot ((N + 7) & ~7) 100 101GLOBAL_ENTRY(copy_page) 102 .prologue 103 alloc r8 = ar.pfs, 2, Nrot-2, 0, Nrot 104 105 .rotr v[2*PREFETCH_DIST], n[D-C+1] 106 .rotp p[N] 107 108 .save ar.lc, saved_lc 109 mov saved_lc = ar.lc 110 .save pr, saved_pr 111 mov saved_pr = pr 112 .body 113 114 mov src_pre_mem = in1 115 mov pr.rot = 0x10000 116 mov ar.ec = 1 // special unrolled loop 117 118 mov dst_pre_mem = in0 119 mov ar.lc = 2*PREFETCH_DIST - 1 120 121 add src_pre_l2 = 8*8, in1 122 add dst_pre_l2 = 8*8, in0 123 add src0 = 8, in1 // first t1 src 124 add src1 = 3*8, in1 // first t3 src 125 add dst0 = 8, in0 // first t1 dst 126 add dst1 = 3*8, in0 // first t3 dst 127 mov t1 = (PAGE_SIZE/128) - (2*PREFETCH_DIST) - 1 128 nop.m 0 129 nop.i 0 130 ;; 131 // same as .line_copy loop, but with all predicated-off instructions removed: 132.prefetch_loop: 133(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0 134(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2 135 br.ctop.sptk .prefetch_loop 136 ;; 137 cmp.eq p16, p0 = r0, r0 // reset p16 to 1 (br.ctop cleared it to zero) 138 mov ar.lc = t1 // with 64KB pages, t1 is too big to fit in 8 bits! 139 mov ar.ec = N // # of stages in pipeline 140 ;; 141.line_copy: 142(p[D]) ld8 t2 = [src0], 3*8 // M0 143(p[D]) ld8 t4 = [src1], 3*8 // M1 144(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2 prefetch dst from memory 145(p[D]) st8 [dst_pre_l2] = n[D-C], 128 // M3 prefetch dst from L2 146 ;; 147(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0 prefetch src from memory 148(p[C]) ld8 n[0] = [src_pre_l2], 128 // M1 prefetch src from L2 149(p[D]) st8 [dst0] = t1, 8 // M2 150(p[D]) st8 [dst1] = t3, 8 // M3 151 ;; 152(p[D]) ld8 t5 = [src0], 8 153(p[D]) ld8 t7 = [src1], 3*8 154(p[D]) st8 [dst0] = t2, 3*8 155(p[D]) st8 [dst1] = t4, 3*8 156 ;; 157(p[D]) ld8 t6 = [src0], 3*8 158(p[D]) ld8 t10 = [src1], 8 159(p[D]) st8 [dst0] = t5, 8 160(p[D]) st8 [dst1] = t7, 3*8 161 ;; 162(p[D]) ld8 t9 = [src0], 3*8 163(p[D]) ld8 t11 = [src1], 3*8 164(p[D]) st8 [dst0] = t6, 3*8 165(p[D]) st8 [dst1] = t10, 8 166 ;; 167(p[D]) ld8 t12 = [src0], 8 168(p[D]) ld8 t14 = [src1], 8 169(p[D]) st8 [dst0] = t9, 3*8 170(p[D]) st8 [dst1] = t11, 3*8 171 ;; 172(p[D]) ld8 t13 = [src0], 4*8 173(p[D]) ld8 t15 = [src1], 4*8 174(p[D]) st8 [dst0] = t12, 8 175(p[D]) st8 [dst1] = t14, 8 176 ;; 177(p[D-1])ld8 t1 = [src0], 8 178(p[D-1])ld8 t3 = [src1], 8 179(p[D]) st8 [dst0] = t13, 4*8 180(p[D]) st8 [dst1] = t15, 4*8 181 br.ctop.sptk .line_copy 182 ;; 183 mov ar.lc = saved_lc 184 mov pr = saved_pr, -1 185 br.ret.sptk.many rp 186END(copy_page) 187EXPORT_SYMBOL(copy_page) 188