xref: /openbmc/linux/arch/ia64/kernel/signal.c (revision 643d1f7f)
1 /*
2  * Architecture-specific signal handling support.
3  *
4  * Copyright (C) 1999-2004 Hewlett-Packard Co
5  *	David Mosberger-Tang <davidm@hpl.hp.com>
6  *
7  * Derived from i386 and Alpha versions.
8  */
9 
10 #include <linux/errno.h>
11 #include <linux/kernel.h>
12 #include <linux/mm.h>
13 #include <linux/ptrace.h>
14 #include <linux/sched.h>
15 #include <linux/signal.h>
16 #include <linux/smp.h>
17 #include <linux/stddef.h>
18 #include <linux/tty.h>
19 #include <linux/binfmts.h>
20 #include <linux/unistd.h>
21 #include <linux/wait.h>
22 
23 #include <asm/ia32.h>
24 #include <asm/intrinsics.h>
25 #include <asm/uaccess.h>
26 #include <asm/rse.h>
27 #include <asm/sigcontext.h>
28 
29 #include "sigframe.h"
30 
31 #define DEBUG_SIG	0
32 #define STACK_ALIGN	16		/* minimal alignment for stack pointer */
33 #define _BLOCKABLE	(~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
34 
35 #if _NSIG_WORDS > 1
36 # define PUT_SIGSET(k,u)	__copy_to_user((u)->sig, (k)->sig, sizeof(sigset_t))
37 # define GET_SIGSET(k,u)	__copy_from_user((k)->sig, (u)->sig, sizeof(sigset_t))
38 #else
39 # define PUT_SIGSET(k,u)	__put_user((k)->sig[0], &(u)->sig[0])
40 # define GET_SIGSET(k,u)	__get_user((k)->sig[0], &(u)->sig[0])
41 #endif
42 
43 asmlinkage long
44 sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2,
45 		 long arg3, long arg4, long arg5, long arg6, long arg7,
46 		 struct pt_regs regs)
47 {
48 	return do_sigaltstack(uss, uoss, regs.r12);
49 }
50 
51 static long
52 restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr)
53 {
54 	unsigned long ip, flags, nat, um, cfm, rsc;
55 	long err;
56 
57 	/* Always make any pending restarted system calls return -EINTR */
58 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
59 
60 	/* restore scratch that always needs gets updated during signal delivery: */
61 	err  = __get_user(flags, &sc->sc_flags);
62 	err |= __get_user(nat, &sc->sc_nat);
63 	err |= __get_user(ip, &sc->sc_ip);			/* instruction pointer */
64 	err |= __get_user(cfm, &sc->sc_cfm);
65 	err |= __get_user(um, &sc->sc_um);			/* user mask */
66 	err |= __get_user(rsc, &sc->sc_ar_rsc);
67 	err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat);
68 	err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);
69 	err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
70 	err |= __get_user(scr->pt.pr, &sc->sc_pr);		/* predicates */
71 	err |= __get_user(scr->pt.b0, &sc->sc_br[0]);		/* b0 (rp) */
72 	err |= __get_user(scr->pt.b6, &sc->sc_br[6]);		/* b6 */
73 	err |= __copy_from_user(&scr->pt.r1, &sc->sc_gr[1], 8);	/* r1 */
74 	err |= __copy_from_user(&scr->pt.r8, &sc->sc_gr[8], 4*8);	/* r8-r11 */
75 	err |= __copy_from_user(&scr->pt.r12, &sc->sc_gr[12], 2*8);	/* r12-r13 */
76 	err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8);	/* r15 */
77 
78 	scr->pt.cr_ifs = cfm | (1UL << 63);
79 	scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */
80 
81 	/* establish new instruction pointer: */
82 	scr->pt.cr_iip = ip & ~0x3UL;
83 	ia64_psr(&scr->pt)->ri = ip & 0x3;
84 	scr->pt.cr_ipsr = (scr->pt.cr_ipsr & ~IA64_PSR_UM) | (um & IA64_PSR_UM);
85 
86 	scr->scratch_unat = ia64_put_scratch_nat_bits(&scr->pt, nat);
87 
88 	if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
89 		/* Restore most scratch-state only when not in syscall. */
90 		err |= __get_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);		/* ar.ccv */
91 		err |= __get_user(scr->pt.b7, &sc->sc_br[7]);			/* b7 */
92 		err |= __get_user(scr->pt.r14, &sc->sc_gr[14]);			/* r14 */
93 		err |= __copy_from_user(&scr->pt.ar_csd, &sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
94 		err |= __copy_from_user(&scr->pt.r2, &sc->sc_gr[2], 2*8);	/* r2-r3 */
95 		err |= __copy_from_user(&scr->pt.r16, &sc->sc_gr[16], 16*8);	/* r16-r31 */
96 	}
97 
98 	if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
99 		struct ia64_psr *psr = ia64_psr(&scr->pt);
100 
101 		err |= __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
102 		psr->mfh = 0;	/* drop signal handler's fph contents... */
103 		preempt_disable();
104 		if (psr->dfh)
105 			ia64_drop_fpu(current);
106 		else {
107 			/* We already own the local fph, otherwise psr->dfh wouldn't be 0.  */
108 			__ia64_load_fpu(current->thread.fph);
109 			ia64_set_local_fpu_owner(current);
110 		}
111 		preempt_enable();
112 	}
113 	return err;
114 }
115 
116 int
117 copy_siginfo_to_user (siginfo_t __user *to, siginfo_t *from)
118 {
119 	if (!access_ok(VERIFY_WRITE, to, sizeof(siginfo_t)))
120 		return -EFAULT;
121 	if (from->si_code < 0) {
122 		if (__copy_to_user(to, from, sizeof(siginfo_t)))
123 			return -EFAULT;
124 		return 0;
125 	} else {
126 		int err;
127 
128 		/*
129 		 * If you change siginfo_t structure, please be sure this code is fixed
130 		 * accordingly.  It should never copy any pad contained in the structure
131 		 * to avoid security leaks, but must copy the generic 3 ints plus the
132 		 * relevant union member.
133 		 */
134 		err = __put_user(from->si_signo, &to->si_signo);
135 		err |= __put_user(from->si_errno, &to->si_errno);
136 		err |= __put_user((short)from->si_code, &to->si_code);
137 		switch (from->si_code >> 16) {
138 		      case __SI_FAULT >> 16:
139 			err |= __put_user(from->si_flags, &to->si_flags);
140 			err |= __put_user(from->si_isr, &to->si_isr);
141 		      case __SI_POLL >> 16:
142 			err |= __put_user(from->si_addr, &to->si_addr);
143 			err |= __put_user(from->si_imm, &to->si_imm);
144 			break;
145 		      case __SI_TIMER >> 16:
146 			err |= __put_user(from->si_tid, &to->si_tid);
147 			err |= __put_user(from->si_overrun, &to->si_overrun);
148 			err |= __put_user(from->si_ptr, &to->si_ptr);
149 			break;
150 		      case __SI_RT >> 16:	/* Not generated by the kernel as of now.  */
151 		      case __SI_MESGQ >> 16:
152 			err |= __put_user(from->si_uid, &to->si_uid);
153 			err |= __put_user(from->si_pid, &to->si_pid);
154 			err |= __put_user(from->si_ptr, &to->si_ptr);
155 			break;
156 		      case __SI_CHLD >> 16:
157 			err |= __put_user(from->si_utime, &to->si_utime);
158 			err |= __put_user(from->si_stime, &to->si_stime);
159 			err |= __put_user(from->si_status, &to->si_status);
160 		      default:
161 			err |= __put_user(from->si_uid, &to->si_uid);
162 			err |= __put_user(from->si_pid, &to->si_pid);
163 			break;
164 		}
165 		return err;
166 	}
167 }
168 
169 long
170 ia64_rt_sigreturn (struct sigscratch *scr)
171 {
172 	extern char ia64_strace_leave_kernel, ia64_leave_kernel;
173 	struct sigcontext __user *sc;
174 	struct siginfo si;
175 	sigset_t set;
176 	long retval;
177 
178 	sc = &((struct sigframe __user *) (scr->pt.r12 + 16))->sc;
179 
180 	/*
181 	 * When we return to the previously executing context, r8 and r10 have already
182 	 * been setup the way we want them.  Indeed, if the signal wasn't delivered while
183 	 * in a system call, we must not touch r8 or r10 as otherwise user-level state
184 	 * could be corrupted.
185 	 */
186 	retval = (long) &ia64_leave_kernel;
187 	if (test_thread_flag(TIF_SYSCALL_TRACE)
188 	    || test_thread_flag(TIF_SYSCALL_AUDIT))
189 		/*
190 		 * strace expects to be notified after sigreturn returns even though the
191 		 * context to which we return may not be in the middle of a syscall.
192 		 * Thus, the return-value that strace displays for sigreturn is
193 		 * meaningless.
194 		 */
195 		retval = (long) &ia64_strace_leave_kernel;
196 
197 	if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
198 		goto give_sigsegv;
199 
200 	if (GET_SIGSET(&set, &sc->sc_mask))
201 		goto give_sigsegv;
202 
203 	sigdelsetmask(&set, ~_BLOCKABLE);
204 
205 	spin_lock_irq(&current->sighand->siglock);
206 	{
207 		current->blocked = set;
208 		recalc_sigpending();
209 	}
210 	spin_unlock_irq(&current->sighand->siglock);
211 
212 	if (restore_sigcontext(sc, scr))
213 		goto give_sigsegv;
214 
215 #if DEBUG_SIG
216 	printk("SIG return (%s:%d): sp=%lx ip=%lx\n",
217 	       current->comm, current->pid, scr->pt.r12, scr->pt.cr_iip);
218 #endif
219 	/*
220 	 * It is more difficult to avoid calling this function than to
221 	 * call it and ignore errors.
222 	 */
223 	do_sigaltstack(&sc->sc_stack, NULL, scr->pt.r12);
224 	return retval;
225 
226   give_sigsegv:
227 	si.si_signo = SIGSEGV;
228 	si.si_errno = 0;
229 	si.si_code = SI_KERNEL;
230 	si.si_pid = task_pid_vnr(current);
231 	si.si_uid = current->uid;
232 	si.si_addr = sc;
233 	force_sig_info(SIGSEGV, &si, current);
234 	return retval;
235 }
236 
237 /*
238  * This does just the minimum required setup of sigcontext.
239  * Specifically, it only installs data that is either not knowable at
240  * the user-level or that gets modified before execution in the
241  * trampoline starts.  Everything else is done at the user-level.
242  */
243 static long
244 setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
245 {
246 	unsigned long flags = 0, ifs, cfm, nat;
247 	long err = 0;
248 
249 	ifs = scr->pt.cr_ifs;
250 
251 	if (on_sig_stack((unsigned long) sc))
252 		flags |= IA64_SC_FLAG_ONSTACK;
253 	if ((ifs & (1UL << 63)) == 0)
254 		/* if cr_ifs doesn't have the valid bit set, we got here through a syscall */
255 		flags |= IA64_SC_FLAG_IN_SYSCALL;
256 	cfm = ifs & ((1UL << 38) - 1);
257 	ia64_flush_fph(current);
258 	if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
259 		flags |= IA64_SC_FLAG_FPH_VALID;
260 		err = __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
261 	}
262 
263 	nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
264 
265 	err |= __put_user(flags, &sc->sc_flags);
266 	err |= __put_user(nat, &sc->sc_nat);
267 	err |= PUT_SIGSET(mask, &sc->sc_mask);
268 	err |= __put_user(cfm, &sc->sc_cfm);
269 	err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um);
270 	err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc);
271 	err |= __put_user(scr->pt.ar_unat, &sc->sc_ar_unat);		/* ar.unat */
272 	err |= __put_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);		/* ar.fpsr */
273 	err |= __put_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
274 	err |= __put_user(scr->pt.pr, &sc->sc_pr);			/* predicates */
275 	err |= __put_user(scr->pt.b0, &sc->sc_br[0]);			/* b0 (rp) */
276 	err |= __put_user(scr->pt.b6, &sc->sc_br[6]);			/* b6 */
277 	err |= __copy_to_user(&sc->sc_gr[1], &scr->pt.r1, 8);		/* r1 */
278 	err |= __copy_to_user(&sc->sc_gr[8], &scr->pt.r8, 4*8);		/* r8-r11 */
279 	err |= __copy_to_user(&sc->sc_gr[12], &scr->pt.r12, 2*8);	/* r12-r13 */
280 	err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8);		/* r15 */
281 	err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
282 
283 	if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
284 		/* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
285 		err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);		/* ar.ccv */
286 		err |= __put_user(scr->pt.b7, &sc->sc_br[7]);			/* b7 */
287 		err |= __put_user(scr->pt.r14, &sc->sc_gr[14]);			/* r14 */
288 		err |= __copy_to_user(&sc->sc_ar25, &scr->pt.ar_csd, 2*8); /* ar.csd & ar.ssd */
289 		err |= __copy_to_user(&sc->sc_gr[2], &scr->pt.r2, 2*8);		/* r2-r3 */
290 		err |= __copy_to_user(&sc->sc_gr[16], &scr->pt.r16, 16*8);	/* r16-r31 */
291 	}
292 	return err;
293 }
294 
295 /*
296  * Check whether the register-backing store is already on the signal stack.
297  */
298 static inline int
299 rbs_on_sig_stack (unsigned long bsp)
300 {
301 	return (bsp - current->sas_ss_sp < current->sas_ss_size);
302 }
303 
304 static long
305 force_sigsegv_info (int sig, void __user *addr)
306 {
307 	unsigned long flags;
308 	struct siginfo si;
309 
310 	if (sig == SIGSEGV) {
311 		/*
312 		 * Acquiring siglock around the sa_handler-update is almost
313 		 * certainly overkill, but this isn't a
314 		 * performance-critical path and I'd rather play it safe
315 		 * here than having to debug a nasty race if and when
316 		 * something changes in kernel/signal.c that would make it
317 		 * no longer safe to modify sa_handler without holding the
318 		 * lock.
319 		 */
320 		spin_lock_irqsave(&current->sighand->siglock, flags);
321 		current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
322 		spin_unlock_irqrestore(&current->sighand->siglock, flags);
323 	}
324 	si.si_signo = SIGSEGV;
325 	si.si_errno = 0;
326 	si.si_code = SI_KERNEL;
327 	si.si_pid = task_pid_vnr(current);
328 	si.si_uid = current->uid;
329 	si.si_addr = addr;
330 	force_sig_info(SIGSEGV, &si, current);
331 	return 0;
332 }
333 
334 static long
335 setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
336 	     struct sigscratch *scr)
337 {
338 	extern char __kernel_sigtramp[];
339 	unsigned long tramp_addr, new_rbs = 0, new_sp;
340 	struct sigframe __user *frame;
341 	long err;
342 
343 	new_sp = scr->pt.r12;
344 	tramp_addr = (unsigned long) __kernel_sigtramp;
345 	if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
346 		new_sp = current->sas_ss_sp + current->sas_ss_size;
347 		/*
348 		 * We need to check for the register stack being on the signal stack
349 		 * separately, because it's switched separately (memory stack is switched
350 		 * in the kernel, register stack is switched in the signal trampoline).
351 		 */
352 		if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
353 			new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
354 	}
355 	frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
356 
357 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
358 		return force_sigsegv_info(sig, frame);
359 
360 	err  = __put_user(sig, &frame->arg0);
361 	err |= __put_user(&frame->info, &frame->arg1);
362 	err |= __put_user(&frame->sc, &frame->arg2);
363 	err |= __put_user(new_rbs, &frame->sc.sc_rbs_base);
364 	err |= __put_user(0, &frame->sc.sc_loadrs);	/* initialize to zero */
365 	err |= __put_user(ka->sa.sa_handler, &frame->handler);
366 
367 	err |= copy_siginfo_to_user(&frame->info, info);
368 
369 	err |= __put_user(current->sas_ss_sp, &frame->sc.sc_stack.ss_sp);
370 	err |= __put_user(current->sas_ss_size, &frame->sc.sc_stack.ss_size);
371 	err |= __put_user(sas_ss_flags(scr->pt.r12), &frame->sc.sc_stack.ss_flags);
372 	err |= setup_sigcontext(&frame->sc, set, scr);
373 
374 	if (unlikely(err))
375 		return force_sigsegv_info(sig, frame);
376 
377 	scr->pt.r12 = (unsigned long) frame - 16;	/* new stack pointer */
378 	scr->pt.ar_fpsr = FPSR_DEFAULT;			/* reset fpsr for signal handler */
379 	scr->pt.cr_iip = tramp_addr;
380 	ia64_psr(&scr->pt)->ri = 0;			/* start executing in first slot */
381 	ia64_psr(&scr->pt)->be = 0;			/* force little-endian byte-order */
382 	/*
383 	 * Force the interruption function mask to zero.  This has no effect when a
384 	 * system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is
385 	 * ignored), but it has the desirable effect of making it possible to deliver a
386 	 * signal with an incomplete register frame (which happens when a mandatory RSE
387 	 * load faults).  Furthermore, it has no negative effect on the getting the user's
388 	 * dirty partition preserved, because that's governed by scr->pt.loadrs.
389 	 */
390 	scr->pt.cr_ifs = (1UL << 63);
391 
392 	/*
393 	 * Note: this affects only the NaT bits of the scratch regs (the ones saved in
394 	 * pt_regs), which is exactly what we want.
395 	 */
396 	scr->scratch_unat = 0; /* ensure NaT bits of r12 is clear */
397 
398 #if DEBUG_SIG
399 	printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n",
400 	       current->comm, current->pid, sig, scr->pt.r12, frame->sc.sc_ip, frame->handler);
401 #endif
402 	return 1;
403 }
404 
405 static long
406 handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset,
407 	       struct sigscratch *scr)
408 {
409 	if (IS_IA32_PROCESS(&scr->pt)) {
410 		/* send signal to IA-32 process */
411 		if (!ia32_setup_frame1(sig, ka, info, oldset, &scr->pt))
412 			return 0;
413 	} else
414 		/* send signal to IA-64 process */
415 		if (!setup_frame(sig, ka, info, oldset, scr))
416 			return 0;
417 
418 	spin_lock_irq(&current->sighand->siglock);
419 	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
420 	if (!(ka->sa.sa_flags & SA_NODEFER))
421 		sigaddset(&current->blocked, sig);
422 	recalc_sigpending();
423 	spin_unlock_irq(&current->sighand->siglock);
424 	return 1;
425 }
426 
427 /*
428  * Note that `init' is a special process: it doesn't get signals it doesn't want to
429  * handle.  Thus you cannot kill init even with a SIGKILL even by mistake.
430  */
431 void
432 ia64_do_signal (struct sigscratch *scr, long in_syscall)
433 {
434 	struct k_sigaction ka;
435 	sigset_t *oldset;
436 	siginfo_t info;
437 	long restart = in_syscall;
438 	long errno = scr->pt.r8;
439 #	define ERR_CODE(c)	(IS_IA32_PROCESS(&scr->pt) ? -(c) : (c))
440 
441 	/*
442 	 * In the ia64_leave_kernel code path, we want the common case to go fast, which
443 	 * is why we may in certain cases get here from kernel mode. Just return without
444 	 * doing anything if so.
445 	 */
446 	if (!user_mode(&scr->pt))
447 		return;
448 
449 	if (test_thread_flag(TIF_RESTORE_SIGMASK))
450 		oldset = &current->saved_sigmask;
451 	else
452 		oldset = &current->blocked;
453 
454 	/*
455 	 * This only loops in the rare cases of handle_signal() failing, in which case we
456 	 * need to push through a forced SIGSEGV.
457 	 */
458 	while (1) {
459 		int signr = get_signal_to_deliver(&info, &ka, &scr->pt, NULL);
460 
461 		/*
462 		 * get_signal_to_deliver() may have run a debugger (via notify_parent())
463 		 * and the debugger may have modified the state (e.g., to arrange for an
464 		 * inferior call), thus it's important to check for restarting _after_
465 		 * get_signal_to_deliver().
466 		 */
467 		if (IS_IA32_PROCESS(&scr->pt)) {
468 			if (in_syscall) {
469 				if (errno >= 0)
470 					restart = 0;
471 				else
472 					errno = -errno;
473 			}
474 		} else if ((long) scr->pt.r10 != -1)
475 			/*
476 			 * A system calls has to be restarted only if one of the error codes
477 			 * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned.  If r10
478 			 * isn't -1 then r8 doesn't hold an error code and we don't need to
479 			 * restart the syscall, so we can clear the "restart" flag here.
480 			 */
481 			restart = 0;
482 
483 		if (signr <= 0)
484 			break;
485 
486 		if (unlikely(restart)) {
487 			switch (errno) {
488 			      case ERESTART_RESTARTBLOCK:
489 			      case ERESTARTNOHAND:
490 				scr->pt.r8 = ERR_CODE(EINTR);
491 				/* note: scr->pt.r10 is already -1 */
492 				break;
493 
494 			      case ERESTARTSYS:
495 				if ((ka.sa.sa_flags & SA_RESTART) == 0) {
496 					scr->pt.r8 = ERR_CODE(EINTR);
497 					/* note: scr->pt.r10 is already -1 */
498 					break;
499 				}
500 			      case ERESTARTNOINTR:
501 				if (IS_IA32_PROCESS(&scr->pt)) {
502 					scr->pt.r8 = scr->pt.r1;
503 					scr->pt.cr_iip -= 2;
504 				} else
505 					ia64_decrement_ip(&scr->pt);
506 				restart = 0; /* don't restart twice if handle_signal() fails... */
507 			}
508 		}
509 
510 		/*
511 		 * Whee!  Actually deliver the signal.  If the delivery failed, we need to
512 		 * continue to iterate in this loop so we can deliver the SIGSEGV...
513 		 */
514 		if (handle_signal(signr, &ka, &info, oldset, scr)) {
515 			/* a signal was successfully delivered; the saved
516 			 * sigmask will have been stored in the signal frame,
517 			 * and will be restored by sigreturn, so we can simply
518 			 * clear the TIF_RESTORE_SIGMASK flag */
519 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
520 				clear_thread_flag(TIF_RESTORE_SIGMASK);
521 			return;
522 		}
523 	}
524 
525 	/* Did we come from a system call? */
526 	if (restart) {
527 		/* Restart the system call - no handlers present */
528 		if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR
529 		    || errno == ERESTART_RESTARTBLOCK)
530 		{
531 			if (IS_IA32_PROCESS(&scr->pt)) {
532 				scr->pt.r8 = scr->pt.r1;
533 				scr->pt.cr_iip -= 2;
534 				if (errno == ERESTART_RESTARTBLOCK)
535 					scr->pt.r8 = 0;	/* x86 version of __NR_restart_syscall */
536 			} else {
537 				/*
538 				 * Note: the syscall number is in r15 which is saved in
539 				 * pt_regs so all we need to do here is adjust ip so that
540 				 * the "break" instruction gets re-executed.
541 				 */
542 				ia64_decrement_ip(&scr->pt);
543 				if (errno == ERESTART_RESTARTBLOCK)
544 					scr->pt.r15 = __NR_restart_syscall;
545 			}
546 		}
547 	}
548 
549 	/* if there's no signal to deliver, we just put the saved sigmask
550 	 * back */
551 	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
552 		clear_thread_flag(TIF_RESTORE_SIGMASK);
553 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
554 	}
555 }
556