xref: /openbmc/linux/arch/ia64/kernel/signal.c (revision 37185b33)
1 /*
2  * Architecture-specific signal handling support.
3  *
4  * Copyright (C) 1999-2004 Hewlett-Packard Co
5  *	David Mosberger-Tang <davidm@hpl.hp.com>
6  *
7  * Derived from i386 and Alpha versions.
8  */
9 
10 #include <linux/errno.h>
11 #include <linux/kernel.h>
12 #include <linux/mm.h>
13 #include <linux/ptrace.h>
14 #include <linux/tracehook.h>
15 #include <linux/sched.h>
16 #include <linux/signal.h>
17 #include <linux/smp.h>
18 #include <linux/stddef.h>
19 #include <linux/tty.h>
20 #include <linux/binfmts.h>
21 #include <linux/unistd.h>
22 #include <linux/wait.h>
23 
24 #include <asm/intrinsics.h>
25 #include <asm/uaccess.h>
26 #include <asm/rse.h>
27 #include <asm/sigcontext.h>
28 
29 #include "sigframe.h"
30 
31 #define DEBUG_SIG	0
32 #define STACK_ALIGN	16		/* minimal alignment for stack pointer */
33 
34 #if _NSIG_WORDS > 1
35 # define PUT_SIGSET(k,u)	__copy_to_user((u)->sig, (k)->sig, sizeof(sigset_t))
36 # define GET_SIGSET(k,u)	__copy_from_user((k)->sig, (u)->sig, sizeof(sigset_t))
37 #else
38 # define PUT_SIGSET(k,u)	__put_user((k)->sig[0], &(u)->sig[0])
39 # define GET_SIGSET(k,u)	__get_user((k)->sig[0], &(u)->sig[0])
40 #endif
41 
42 asmlinkage long
43 sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2,
44 		 long arg3, long arg4, long arg5, long arg6, long arg7,
45 		 struct pt_regs regs)
46 {
47 	return do_sigaltstack(uss, uoss, regs.r12);
48 }
49 
50 static long
51 restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr)
52 {
53 	unsigned long ip, flags, nat, um, cfm, rsc;
54 	long err;
55 
56 	/* Always make any pending restarted system calls return -EINTR */
57 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
58 
59 	/* restore scratch that always needs gets updated during signal delivery: */
60 	err  = __get_user(flags, &sc->sc_flags);
61 	err |= __get_user(nat, &sc->sc_nat);
62 	err |= __get_user(ip, &sc->sc_ip);			/* instruction pointer */
63 	err |= __get_user(cfm, &sc->sc_cfm);
64 	err |= __get_user(um, &sc->sc_um);			/* user mask */
65 	err |= __get_user(rsc, &sc->sc_ar_rsc);
66 	err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat);
67 	err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);
68 	err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
69 	err |= __get_user(scr->pt.pr, &sc->sc_pr);		/* predicates */
70 	err |= __get_user(scr->pt.b0, &sc->sc_br[0]);		/* b0 (rp) */
71 	err |= __get_user(scr->pt.b6, &sc->sc_br[6]);		/* b6 */
72 	err |= __copy_from_user(&scr->pt.r1, &sc->sc_gr[1], 8);	/* r1 */
73 	err |= __copy_from_user(&scr->pt.r8, &sc->sc_gr[8], 4*8);	/* r8-r11 */
74 	err |= __copy_from_user(&scr->pt.r12, &sc->sc_gr[12], 2*8);	/* r12-r13 */
75 	err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8);	/* r15 */
76 
77 	scr->pt.cr_ifs = cfm | (1UL << 63);
78 	scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */
79 
80 	/* establish new instruction pointer: */
81 	scr->pt.cr_iip = ip & ~0x3UL;
82 	ia64_psr(&scr->pt)->ri = ip & 0x3;
83 	scr->pt.cr_ipsr = (scr->pt.cr_ipsr & ~IA64_PSR_UM) | (um & IA64_PSR_UM);
84 
85 	scr->scratch_unat = ia64_put_scratch_nat_bits(&scr->pt, nat);
86 
87 	if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
88 		/* Restore most scratch-state only when not in syscall. */
89 		err |= __get_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);		/* ar.ccv */
90 		err |= __get_user(scr->pt.b7, &sc->sc_br[7]);			/* b7 */
91 		err |= __get_user(scr->pt.r14, &sc->sc_gr[14]);			/* r14 */
92 		err |= __copy_from_user(&scr->pt.ar_csd, &sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
93 		err |= __copy_from_user(&scr->pt.r2, &sc->sc_gr[2], 2*8);	/* r2-r3 */
94 		err |= __copy_from_user(&scr->pt.r16, &sc->sc_gr[16], 16*8);	/* r16-r31 */
95 	}
96 
97 	if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
98 		struct ia64_psr *psr = ia64_psr(&scr->pt);
99 
100 		err |= __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
101 		psr->mfh = 0;	/* drop signal handler's fph contents... */
102 		preempt_disable();
103 		if (psr->dfh)
104 			ia64_drop_fpu(current);
105 		else {
106 			/* We already own the local fph, otherwise psr->dfh wouldn't be 0.  */
107 			__ia64_load_fpu(current->thread.fph);
108 			ia64_set_local_fpu_owner(current);
109 		}
110 		preempt_enable();
111 	}
112 	return err;
113 }
114 
115 int
116 copy_siginfo_to_user (siginfo_t __user *to, siginfo_t *from)
117 {
118 	if (!access_ok(VERIFY_WRITE, to, sizeof(siginfo_t)))
119 		return -EFAULT;
120 	if (from->si_code < 0) {
121 		if (__copy_to_user(to, from, sizeof(siginfo_t)))
122 			return -EFAULT;
123 		return 0;
124 	} else {
125 		int err;
126 
127 		/*
128 		 * If you change siginfo_t structure, please be sure this code is fixed
129 		 * accordingly.  It should never copy any pad contained in the structure
130 		 * to avoid security leaks, but must copy the generic 3 ints plus the
131 		 * relevant union member.
132 		 */
133 		err = __put_user(from->si_signo, &to->si_signo);
134 		err |= __put_user(from->si_errno, &to->si_errno);
135 		err |= __put_user((short)from->si_code, &to->si_code);
136 		switch (from->si_code >> 16) {
137 		      case __SI_FAULT >> 16:
138 			err |= __put_user(from->si_flags, &to->si_flags);
139 			err |= __put_user(from->si_isr, &to->si_isr);
140 		      case __SI_POLL >> 16:
141 			err |= __put_user(from->si_addr, &to->si_addr);
142 			err |= __put_user(from->si_imm, &to->si_imm);
143 			break;
144 		      case __SI_TIMER >> 16:
145 			err |= __put_user(from->si_tid, &to->si_tid);
146 			err |= __put_user(from->si_overrun, &to->si_overrun);
147 			err |= __put_user(from->si_ptr, &to->si_ptr);
148 			break;
149 		      case __SI_RT >> 16:	/* Not generated by the kernel as of now.  */
150 		      case __SI_MESGQ >> 16:
151 			err |= __put_user(from->si_uid, &to->si_uid);
152 			err |= __put_user(from->si_pid, &to->si_pid);
153 			err |= __put_user(from->si_ptr, &to->si_ptr);
154 			break;
155 		      case __SI_CHLD >> 16:
156 			err |= __put_user(from->si_utime, &to->si_utime);
157 			err |= __put_user(from->si_stime, &to->si_stime);
158 			err |= __put_user(from->si_status, &to->si_status);
159 		      default:
160 			err |= __put_user(from->si_uid, &to->si_uid);
161 			err |= __put_user(from->si_pid, &to->si_pid);
162 			break;
163 		}
164 		return err;
165 	}
166 }
167 
168 long
169 ia64_rt_sigreturn (struct sigscratch *scr)
170 {
171 	extern char ia64_strace_leave_kernel, ia64_leave_kernel;
172 	struct sigcontext __user *sc;
173 	struct siginfo si;
174 	sigset_t set;
175 	long retval;
176 
177 	sc = &((struct sigframe __user *) (scr->pt.r12 + 16))->sc;
178 
179 	/*
180 	 * When we return to the previously executing context, r8 and r10 have already
181 	 * been setup the way we want them.  Indeed, if the signal wasn't delivered while
182 	 * in a system call, we must not touch r8 or r10 as otherwise user-level state
183 	 * could be corrupted.
184 	 */
185 	retval = (long) &ia64_leave_kernel;
186 	if (test_thread_flag(TIF_SYSCALL_TRACE)
187 	    || test_thread_flag(TIF_SYSCALL_AUDIT))
188 		/*
189 		 * strace expects to be notified after sigreturn returns even though the
190 		 * context to which we return may not be in the middle of a syscall.
191 		 * Thus, the return-value that strace displays for sigreturn is
192 		 * meaningless.
193 		 */
194 		retval = (long) &ia64_strace_leave_kernel;
195 
196 	if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
197 		goto give_sigsegv;
198 
199 	if (GET_SIGSET(&set, &sc->sc_mask))
200 		goto give_sigsegv;
201 
202 	set_current_blocked(&set);
203 
204 	if (restore_sigcontext(sc, scr))
205 		goto give_sigsegv;
206 
207 #if DEBUG_SIG
208 	printk("SIG return (%s:%d): sp=%lx ip=%lx\n",
209 	       current->comm, current->pid, scr->pt.r12, scr->pt.cr_iip);
210 #endif
211 	/*
212 	 * It is more difficult to avoid calling this function than to
213 	 * call it and ignore errors.
214 	 */
215 	do_sigaltstack(&sc->sc_stack, NULL, scr->pt.r12);
216 	return retval;
217 
218   give_sigsegv:
219 	si.si_signo = SIGSEGV;
220 	si.si_errno = 0;
221 	si.si_code = SI_KERNEL;
222 	si.si_pid = task_pid_vnr(current);
223 	si.si_uid = current_uid();
224 	si.si_addr = sc;
225 	force_sig_info(SIGSEGV, &si, current);
226 	return retval;
227 }
228 
229 /*
230  * This does just the minimum required setup of sigcontext.
231  * Specifically, it only installs data that is either not knowable at
232  * the user-level or that gets modified before execution in the
233  * trampoline starts.  Everything else is done at the user-level.
234  */
235 static long
236 setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
237 {
238 	unsigned long flags = 0, ifs, cfm, nat;
239 	long err = 0;
240 
241 	ifs = scr->pt.cr_ifs;
242 
243 	if (on_sig_stack((unsigned long) sc))
244 		flags |= IA64_SC_FLAG_ONSTACK;
245 	if ((ifs & (1UL << 63)) == 0)
246 		/* if cr_ifs doesn't have the valid bit set, we got here through a syscall */
247 		flags |= IA64_SC_FLAG_IN_SYSCALL;
248 	cfm = ifs & ((1UL << 38) - 1);
249 	ia64_flush_fph(current);
250 	if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
251 		flags |= IA64_SC_FLAG_FPH_VALID;
252 		err = __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
253 	}
254 
255 	nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
256 
257 	err |= __put_user(flags, &sc->sc_flags);
258 	err |= __put_user(nat, &sc->sc_nat);
259 	err |= PUT_SIGSET(mask, &sc->sc_mask);
260 	err |= __put_user(cfm, &sc->sc_cfm);
261 	err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um);
262 	err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc);
263 	err |= __put_user(scr->pt.ar_unat, &sc->sc_ar_unat);		/* ar.unat */
264 	err |= __put_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);		/* ar.fpsr */
265 	err |= __put_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
266 	err |= __put_user(scr->pt.pr, &sc->sc_pr);			/* predicates */
267 	err |= __put_user(scr->pt.b0, &sc->sc_br[0]);			/* b0 (rp) */
268 	err |= __put_user(scr->pt.b6, &sc->sc_br[6]);			/* b6 */
269 	err |= __copy_to_user(&sc->sc_gr[1], &scr->pt.r1, 8);		/* r1 */
270 	err |= __copy_to_user(&sc->sc_gr[8], &scr->pt.r8, 4*8);		/* r8-r11 */
271 	err |= __copy_to_user(&sc->sc_gr[12], &scr->pt.r12, 2*8);	/* r12-r13 */
272 	err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8);		/* r15 */
273 	err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
274 
275 	if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
276 		/* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
277 		err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);		/* ar.ccv */
278 		err |= __put_user(scr->pt.b7, &sc->sc_br[7]);			/* b7 */
279 		err |= __put_user(scr->pt.r14, &sc->sc_gr[14]);			/* r14 */
280 		err |= __copy_to_user(&sc->sc_ar25, &scr->pt.ar_csd, 2*8); /* ar.csd & ar.ssd */
281 		err |= __copy_to_user(&sc->sc_gr[2], &scr->pt.r2, 2*8);		/* r2-r3 */
282 		err |= __copy_to_user(&sc->sc_gr[16], &scr->pt.r16, 16*8);	/* r16-r31 */
283 	}
284 	return err;
285 }
286 
287 /*
288  * Check whether the register-backing store is already on the signal stack.
289  */
290 static inline int
291 rbs_on_sig_stack (unsigned long bsp)
292 {
293 	return (bsp - current->sas_ss_sp < current->sas_ss_size);
294 }
295 
296 static long
297 force_sigsegv_info (int sig, void __user *addr)
298 {
299 	unsigned long flags;
300 	struct siginfo si;
301 
302 	if (sig == SIGSEGV) {
303 		/*
304 		 * Acquiring siglock around the sa_handler-update is almost
305 		 * certainly overkill, but this isn't a
306 		 * performance-critical path and I'd rather play it safe
307 		 * here than having to debug a nasty race if and when
308 		 * something changes in kernel/signal.c that would make it
309 		 * no longer safe to modify sa_handler without holding the
310 		 * lock.
311 		 */
312 		spin_lock_irqsave(&current->sighand->siglock, flags);
313 		current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
314 		spin_unlock_irqrestore(&current->sighand->siglock, flags);
315 	}
316 	si.si_signo = SIGSEGV;
317 	si.si_errno = 0;
318 	si.si_code = SI_KERNEL;
319 	si.si_pid = task_pid_vnr(current);
320 	si.si_uid = current_uid();
321 	si.si_addr = addr;
322 	force_sig_info(SIGSEGV, &si, current);
323 	return 0;
324 }
325 
326 static long
327 setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
328 	     struct sigscratch *scr)
329 {
330 	extern char __kernel_sigtramp[];
331 	unsigned long tramp_addr, new_rbs = 0, new_sp;
332 	struct sigframe __user *frame;
333 	long err;
334 
335 	new_sp = scr->pt.r12;
336 	tramp_addr = (unsigned long) __kernel_sigtramp;
337 	if (ka->sa.sa_flags & SA_ONSTACK) {
338 		int onstack = sas_ss_flags(new_sp);
339 
340 		if (onstack == 0) {
341 			new_sp = current->sas_ss_sp + current->sas_ss_size;
342 			/*
343 			 * We need to check for the register stack being on the
344 			 * signal stack separately, because it's switched
345 			 * separately (memory stack is switched in the kernel,
346 			 * register stack is switched in the signal trampoline).
347 			 */
348 			if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
349 				new_rbs = ALIGN(current->sas_ss_sp,
350 						sizeof(long));
351 		} else if (onstack == SS_ONSTACK) {
352 			unsigned long check_sp;
353 
354 			/*
355 			 * If we are on the alternate signal stack and would
356 			 * overflow it, don't. Return an always-bogus address
357 			 * instead so we will die with SIGSEGV.
358 			 */
359 			check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
360 			if (!likely(on_sig_stack(check_sp)))
361 				return force_sigsegv_info(sig, (void __user *)
362 							  check_sp);
363 		}
364 	}
365 	frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
366 
367 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
368 		return force_sigsegv_info(sig, frame);
369 
370 	err  = __put_user(sig, &frame->arg0);
371 	err |= __put_user(&frame->info, &frame->arg1);
372 	err |= __put_user(&frame->sc, &frame->arg2);
373 	err |= __put_user(new_rbs, &frame->sc.sc_rbs_base);
374 	err |= __put_user(0, &frame->sc.sc_loadrs);	/* initialize to zero */
375 	err |= __put_user(ka->sa.sa_handler, &frame->handler);
376 
377 	err |= copy_siginfo_to_user(&frame->info, info);
378 
379 	err |= __put_user(current->sas_ss_sp, &frame->sc.sc_stack.ss_sp);
380 	err |= __put_user(current->sas_ss_size, &frame->sc.sc_stack.ss_size);
381 	err |= __put_user(sas_ss_flags(scr->pt.r12), &frame->sc.sc_stack.ss_flags);
382 	err |= setup_sigcontext(&frame->sc, set, scr);
383 
384 	if (unlikely(err))
385 		return force_sigsegv_info(sig, frame);
386 
387 	scr->pt.r12 = (unsigned long) frame - 16;	/* new stack pointer */
388 	scr->pt.ar_fpsr = FPSR_DEFAULT;			/* reset fpsr for signal handler */
389 	scr->pt.cr_iip = tramp_addr;
390 	ia64_psr(&scr->pt)->ri = 0;			/* start executing in first slot */
391 	ia64_psr(&scr->pt)->be = 0;			/* force little-endian byte-order */
392 	/*
393 	 * Force the interruption function mask to zero.  This has no effect when a
394 	 * system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is
395 	 * ignored), but it has the desirable effect of making it possible to deliver a
396 	 * signal with an incomplete register frame (which happens when a mandatory RSE
397 	 * load faults).  Furthermore, it has no negative effect on the getting the user's
398 	 * dirty partition preserved, because that's governed by scr->pt.loadrs.
399 	 */
400 	scr->pt.cr_ifs = (1UL << 63);
401 
402 	/*
403 	 * Note: this affects only the NaT bits of the scratch regs (the ones saved in
404 	 * pt_regs), which is exactly what we want.
405 	 */
406 	scr->scratch_unat = 0; /* ensure NaT bits of r12 is clear */
407 
408 #if DEBUG_SIG
409 	printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n",
410 	       current->comm, current->pid, sig, scr->pt.r12, frame->sc.sc_ip, frame->handler);
411 #endif
412 	return 1;
413 }
414 
415 static long
416 handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
417 	       struct sigscratch *scr)
418 {
419 	if (!setup_frame(sig, ka, info, sigmask_to_save(), scr))
420 		return 0;
421 
422 	signal_delivered(sig, info, ka, &scr->pt,
423 				 test_thread_flag(TIF_SINGLESTEP));
424 
425 	return 1;
426 }
427 
428 /*
429  * Note that `init' is a special process: it doesn't get signals it doesn't want to
430  * handle.  Thus you cannot kill init even with a SIGKILL even by mistake.
431  */
432 void
433 ia64_do_signal (struct sigscratch *scr, long in_syscall)
434 {
435 	struct k_sigaction ka;
436 	siginfo_t info;
437 	long restart = in_syscall;
438 	long errno = scr->pt.r8;
439 
440 	/*
441 	 * In the ia64_leave_kernel code path, we want the common case to go fast, which
442 	 * is why we may in certain cases get here from kernel mode. Just return without
443 	 * doing anything if so.
444 	 */
445 	if (!user_mode(&scr->pt))
446 		return;
447 
448 	/*
449 	 * This only loops in the rare cases of handle_signal() failing, in which case we
450 	 * need to push through a forced SIGSEGV.
451 	 */
452 	while (1) {
453 		int signr = get_signal_to_deliver(&info, &ka, &scr->pt, NULL);
454 
455 		/*
456 		 * get_signal_to_deliver() may have run a debugger (via notify_parent())
457 		 * and the debugger may have modified the state (e.g., to arrange for an
458 		 * inferior call), thus it's important to check for restarting _after_
459 		 * get_signal_to_deliver().
460 		 */
461 		if ((long) scr->pt.r10 != -1)
462 			/*
463 			 * A system calls has to be restarted only if one of the error codes
464 			 * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned.  If r10
465 			 * isn't -1 then r8 doesn't hold an error code and we don't need to
466 			 * restart the syscall, so we can clear the "restart" flag here.
467 			 */
468 			restart = 0;
469 
470 		if (signr <= 0)
471 			break;
472 
473 		if (unlikely(restart)) {
474 			switch (errno) {
475 			      case ERESTART_RESTARTBLOCK:
476 			      case ERESTARTNOHAND:
477 				scr->pt.r8 = EINTR;
478 				/* note: scr->pt.r10 is already -1 */
479 				break;
480 
481 			      case ERESTARTSYS:
482 				if ((ka.sa.sa_flags & SA_RESTART) == 0) {
483 					scr->pt.r8 = EINTR;
484 					/* note: scr->pt.r10 is already -1 */
485 					break;
486 				}
487 			      case ERESTARTNOINTR:
488 				ia64_decrement_ip(&scr->pt);
489 				restart = 0; /* don't restart twice if handle_signal() fails... */
490 			}
491 		}
492 
493 		/*
494 		 * Whee!  Actually deliver the signal.  If the delivery failed, we need to
495 		 * continue to iterate in this loop so we can deliver the SIGSEGV...
496 		 */
497 		if (handle_signal(signr, &ka, &info, scr))
498 			return;
499 	}
500 
501 	/* Did we come from a system call? */
502 	if (restart) {
503 		/* Restart the system call - no handlers present */
504 		if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR
505 		    || errno == ERESTART_RESTARTBLOCK)
506 		{
507 			/*
508 			 * Note: the syscall number is in r15 which is saved in
509 			 * pt_regs so all we need to do here is adjust ip so that
510 			 * the "break" instruction gets re-executed.
511 			 */
512 			ia64_decrement_ip(&scr->pt);
513 			if (errno == ERESTART_RESTARTBLOCK)
514 				scr->pt.r15 = __NR_restart_syscall;
515 		}
516 	}
517 
518 	/* if there's no signal to deliver, we just put the saved sigmask
519 	 * back */
520 	restore_saved_sigmask();
521 }
522