xref: /openbmc/linux/arch/ia64/kernel/sal.c (revision 64c70b1c)
1 /*
2  * System Abstraction Layer (SAL) interface routines.
3  *
4  * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
5  *	David Mosberger-Tang <davidm@hpl.hp.com>
6  * Copyright (C) 1999 VA Linux Systems
7  * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
8  */
9 
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/spinlock.h>
14 #include <linux/string.h>
15 
16 #include <asm/delay.h>
17 #include <asm/page.h>
18 #include <asm/sal.h>
19 #include <asm/pal.h>
20 
21  __cacheline_aligned DEFINE_SPINLOCK(sal_lock);
22 unsigned long sal_platform_features;
23 
24 unsigned short sal_revision;
25 unsigned short sal_version;
26 
27 #define SAL_MAJOR(x) ((x) >> 8)
28 #define SAL_MINOR(x) ((x) & 0xff)
29 
30 static struct {
31 	void *addr;	/* function entry point */
32 	void *gpval;	/* gp value to use */
33 } pdesc;
34 
35 static long
36 default_handler (void)
37 {
38 	return -1;
39 }
40 
41 ia64_sal_handler ia64_sal = (ia64_sal_handler) default_handler;
42 ia64_sal_desc_ptc_t *ia64_ptc_domain_info;
43 
44 const char *
45 ia64_sal_strerror (long status)
46 {
47 	const char *str;
48 	switch (status) {
49 	      case 0: str = "Call completed without error"; break;
50 	      case 1: str = "Effect a warm boot of the system to complete "
51 			      "the update"; break;
52 	      case -1: str = "Not implemented"; break;
53 	      case -2: str = "Invalid argument"; break;
54 	      case -3: str = "Call completed with error"; break;
55 	      case -4: str = "Virtual address not registered"; break;
56 	      case -5: str = "No information available"; break;
57 	      case -6: str = "Insufficient space to add the entry"; break;
58 	      case -7: str = "Invalid entry_addr value"; break;
59 	      case -8: str = "Invalid interrupt vector"; break;
60 	      case -9: str = "Requested memory not available"; break;
61 	      case -10: str = "Unable to write to the NVM device"; break;
62 	      case -11: str = "Invalid partition type specified"; break;
63 	      case -12: str = "Invalid NVM_Object id specified"; break;
64 	      case -13: str = "NVM_Object already has the maximum number "
65 				"of partitions"; break;
66 	      case -14: str = "Insufficient space in partition for the "
67 				"requested write sub-function"; break;
68 	      case -15: str = "Insufficient data buffer space for the "
69 				"requested read record sub-function"; break;
70 	      case -16: str = "Scratch buffer required for the write/delete "
71 				"sub-function"; break;
72 	      case -17: str = "Insufficient space in the NVM_Object for the "
73 				"requested create sub-function"; break;
74 	      case -18: str = "Invalid value specified in the partition_rec "
75 				"argument"; break;
76 	      case -19: str = "Record oriented I/O not supported for this "
77 				"partition"; break;
78 	      case -20: str = "Bad format of record to be written or "
79 				"required keyword variable not "
80 				"specified"; break;
81 	      default: str = "Unknown SAL status code"; break;
82 	}
83 	return str;
84 }
85 
86 void __init
87 ia64_sal_handler_init (void *entry_point, void *gpval)
88 {
89 	/* fill in the SAL procedure descriptor and point ia64_sal to it: */
90 	pdesc.addr = entry_point;
91 	pdesc.gpval = gpval;
92 	ia64_sal = (ia64_sal_handler) &pdesc;
93 }
94 
95 static void __init
96 check_versions (struct ia64_sal_systab *systab)
97 {
98 	sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor;
99 	sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor;
100 
101 	/* Check for broken firmware */
102 	if ((sal_revision == SAL_VERSION_CODE(49, 29))
103 	    && (sal_version == SAL_VERSION_CODE(49, 29)))
104 	{
105 		/*
106 		 * Old firmware for zx2000 prototypes have this weird version number,
107 		 * reset it to something sane.
108 		 */
109 		sal_revision = SAL_VERSION_CODE(2, 8);
110 		sal_version = SAL_VERSION_CODE(0, 0);
111 	}
112 }
113 
114 static void __init
115 sal_desc_entry_point (void *p)
116 {
117 	struct ia64_sal_desc_entry_point *ep = p;
118 	ia64_pal_handler_init(__va(ep->pal_proc));
119 	ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp));
120 }
121 
122 #ifdef CONFIG_SMP
123 static void __init
124 set_smp_redirect (int flag)
125 {
126 #ifndef CONFIG_HOTPLUG_CPU
127 	if (no_int_routing)
128 		smp_int_redirect &= ~flag;
129 	else
130 		smp_int_redirect |= flag;
131 #else
132 	/*
133 	 * For CPU Hotplug we dont want to do any chipset supported
134 	 * interrupt redirection. The reason is this would require that
135 	 * All interrupts be stopped and hard bind the irq to a cpu.
136 	 * Later when the interrupt is fired we need to set the redir hint
137 	 * on again in the vector. This is cumbersome for something that the
138 	 * user mode irq balancer will solve anyways.
139 	 */
140 	no_int_routing=1;
141 	smp_int_redirect &= ~flag;
142 #endif
143 }
144 #else
145 #define set_smp_redirect(flag)	do { } while (0)
146 #endif
147 
148 static void __init
149 sal_desc_platform_feature (void *p)
150 {
151 	struct ia64_sal_desc_platform_feature *pf = p;
152 	sal_platform_features = pf->feature_mask;
153 
154 	printk(KERN_INFO "SAL Platform features:");
155 	if (!sal_platform_features) {
156 		printk(" None\n");
157 		return;
158 	}
159 
160 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK)
161 		printk(" BusLock");
162 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) {
163 		printk(" IRQ_Redirection");
164 		set_smp_redirect(SMP_IRQ_REDIRECTION);
165 	}
166 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) {
167 		printk(" IPI_Redirection");
168 		set_smp_redirect(SMP_IPI_REDIRECTION);
169 	}
170 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)
171 		printk(" ITC_Drift");
172 	printk("\n");
173 }
174 
175 #ifdef CONFIG_SMP
176 static void __init
177 sal_desc_ap_wakeup (void *p)
178 {
179 	struct ia64_sal_desc_ap_wakeup *ap = p;
180 
181 	switch (ap->mechanism) {
182 	case IA64_SAL_AP_EXTERNAL_INT:
183 		ap_wakeup_vector = ap->vector;
184 		printk(KERN_INFO "SAL: AP wakeup using external interrupt "
185 				"vector 0x%lx\n", ap_wakeup_vector);
186 		break;
187 	default:
188 		printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n");
189 		break;
190 	}
191 }
192 
193 static void __init
194 chk_nointroute_opt(void)
195 {
196 	char *cp;
197 
198 	for (cp = boot_command_line; *cp; ) {
199 		if (memcmp(cp, "nointroute", 10) == 0) {
200 			no_int_routing = 1;
201 			printk ("no_int_routing on\n");
202 			break;
203 		} else {
204 			while (*cp != ' ' && *cp)
205 				++cp;
206 			while (*cp == ' ')
207 				++cp;
208 		}
209 	}
210 }
211 
212 #else
213 static void __init sal_desc_ap_wakeup(void *p) { }
214 #endif
215 
216 /*
217  * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
218  * cr.ivr, but it never writes cr.eoi.  This leaves any interrupt marked as
219  * "in-service" and masks other interrupts of equal or lower priority.
220  *
221  * HP internal defect reports: F1859, F2775, F3031.
222  */
223 static int sal_cache_flush_drops_interrupts;
224 
225 void __init
226 check_sal_cache_flush (void)
227 {
228 	unsigned long flags;
229 	int cpu;
230 	u64 vector, cache_type = 3;
231 	struct ia64_sal_retval isrv;
232 
233 	cpu = get_cpu();
234 	local_irq_save(flags);
235 
236 	/*
237 	 * Schedule a timer interrupt, wait until it's reported, and see if
238 	 * SAL_CACHE_FLUSH drops it.
239 	 */
240 	ia64_set_itv(IA64_TIMER_VECTOR);
241 	ia64_set_itm(ia64_get_itc() + 1000);
242 
243 	while (!ia64_get_irr(IA64_TIMER_VECTOR))
244 		cpu_relax();
245 
246 	SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
247 
248 	if (isrv.status)
249 		printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status);
250 
251 	if (ia64_get_irr(IA64_TIMER_VECTOR)) {
252 		vector = ia64_get_ivr();
253 		ia64_eoi();
254 		WARN_ON(vector != IA64_TIMER_VECTOR);
255 	} else {
256 		sal_cache_flush_drops_interrupts = 1;
257 		printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
258 			"PAL_CACHE_FLUSH will be used instead\n");
259 		ia64_eoi();
260 	}
261 
262 	local_irq_restore(flags);
263 	put_cpu();
264 }
265 
266 s64
267 ia64_sal_cache_flush (u64 cache_type)
268 {
269 	struct ia64_sal_retval isrv;
270 
271 	if (sal_cache_flush_drops_interrupts) {
272 		unsigned long flags;
273 		u64 progress;
274 		s64 rc;
275 
276 		progress = 0;
277 		local_irq_save(flags);
278 		rc = ia64_pal_cache_flush(cache_type,
279 			PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
280 		local_irq_restore(flags);
281 		return rc;
282 	}
283 
284 	SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
285 	return isrv.status;
286 }
287 
288 void __init
289 ia64_sal_init (struct ia64_sal_systab *systab)
290 {
291 	char *p;
292 	int i;
293 
294 	if (!systab) {
295 		printk(KERN_WARNING "Hmm, no SAL System Table.\n");
296 		return;
297 	}
298 
299 	if (strncmp(systab->signature, "SST_", 4) != 0)
300 		printk(KERN_ERR "bad signature in system table!");
301 
302 	check_versions(systab);
303 #ifdef CONFIG_SMP
304 	chk_nointroute_opt();
305 #endif
306 
307 	/* revisions are coded in BCD, so %x does the job for us */
308 	printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n",
309 			SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision),
310 			systab->oem_id, systab->product_id,
311 			systab->product_id[0] ? " " : "",
312 			SAL_MAJOR(sal_version), SAL_MINOR(sal_version));
313 
314 	p = (char *) (systab + 1);
315 	for (i = 0; i < systab->entry_count; i++) {
316 		/*
317 		 * The first byte of each entry type contains the type
318 		 * descriptor.
319 		 */
320 		switch (*p) {
321 		case SAL_DESC_ENTRY_POINT:
322 			sal_desc_entry_point(p);
323 			break;
324 		case SAL_DESC_PLATFORM_FEATURE:
325 			sal_desc_platform_feature(p);
326 			break;
327 		case SAL_DESC_PTC:
328 			ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p;
329 			break;
330 		case SAL_DESC_AP_WAKEUP:
331 			sal_desc_ap_wakeup(p);
332 			break;
333 		}
334 		p += SAL_DESC_SIZE(*p);
335 	}
336 
337 }
338 
339 int
340 ia64_sal_oemcall(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
341 		 u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, u64 arg7)
342 {
343 	if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
344 		return -1;
345 	SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
346 	return 0;
347 }
348 EXPORT_SYMBOL(ia64_sal_oemcall);
349 
350 int
351 ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
352 			u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6,
353 			u64 arg7)
354 {
355 	if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
356 		return -1;
357 	SAL_CALL_NOLOCK(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
358 			arg7);
359 	return 0;
360 }
361 EXPORT_SYMBOL(ia64_sal_oemcall_nolock);
362 
363 int
364 ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc,
365 			   u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5,
366 			   u64 arg6, u64 arg7)
367 {
368 	if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
369 		return -1;
370 	SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
371 			   arg7);
372 	return 0;
373 }
374 EXPORT_SYMBOL(ia64_sal_oemcall_reentrant);
375