xref: /openbmc/linux/arch/ia64/kernel/sal.c (revision 0a907292)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * System Abstraction Layer (SAL) interface routines.
4  *
5  * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
6  *	David Mosberger-Tang <davidm@hpl.hp.com>
7  * Copyright (C) 1999 VA Linux Systems
8  * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
9  */
10 
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/module.h>
14 #include <linux/spinlock.h>
15 #include <linux/string.h>
16 
17 #include <asm/delay.h>
18 #include <asm/page.h>
19 #include <asm/sal.h>
20 #include <asm/pal.h>
21 #include <asm/xtp.h>
22 
23  __cacheline_aligned DEFINE_SPINLOCK(sal_lock);
24 unsigned long sal_platform_features;
25 
26 unsigned short sal_revision;
27 unsigned short sal_version;
28 
29 #define SAL_MAJOR(x) ((x) >> 8)
30 #define SAL_MINOR(x) ((x) & 0xff)
31 
32 static struct {
33 	void *addr;	/* function entry point */
34 	void *gpval;	/* gp value to use */
35 } pdesc;
36 
37 static long
38 default_handler (void)
39 {
40 	return -1;
41 }
42 
43 ia64_sal_handler ia64_sal = (ia64_sal_handler) default_handler;
44 ia64_sal_desc_ptc_t *ia64_ptc_domain_info;
45 
46 const char *
47 ia64_sal_strerror (long status)
48 {
49 	const char *str;
50 	switch (status) {
51 	      case 0: str = "Call completed without error"; break;
52 	      case 1: str = "Effect a warm boot of the system to complete "
53 			      "the update"; break;
54 	      case -1: str = "Not implemented"; break;
55 	      case -2: str = "Invalid argument"; break;
56 	      case -3: str = "Call completed with error"; break;
57 	      case -4: str = "Virtual address not registered"; break;
58 	      case -5: str = "No information available"; break;
59 	      case -6: str = "Insufficient space to add the entry"; break;
60 	      case -7: str = "Invalid entry_addr value"; break;
61 	      case -8: str = "Invalid interrupt vector"; break;
62 	      case -9: str = "Requested memory not available"; break;
63 	      case -10: str = "Unable to write to the NVM device"; break;
64 	      case -11: str = "Invalid partition type specified"; break;
65 	      case -12: str = "Invalid NVM_Object id specified"; break;
66 	      case -13: str = "NVM_Object already has the maximum number "
67 				"of partitions"; break;
68 	      case -14: str = "Insufficient space in partition for the "
69 				"requested write sub-function"; break;
70 	      case -15: str = "Insufficient data buffer space for the "
71 				"requested read record sub-function"; break;
72 	      case -16: str = "Scratch buffer required for the write/delete "
73 				"sub-function"; break;
74 	      case -17: str = "Insufficient space in the NVM_Object for the "
75 				"requested create sub-function"; break;
76 	      case -18: str = "Invalid value specified in the partition_rec "
77 				"argument"; break;
78 	      case -19: str = "Record oriented I/O not supported for this "
79 				"partition"; break;
80 	      case -20: str = "Bad format of record to be written or "
81 				"required keyword variable not "
82 				"specified"; break;
83 	      default: str = "Unknown SAL status code"; break;
84 	}
85 	return str;
86 }
87 
88 void __init
89 ia64_sal_handler_init (void *entry_point, void *gpval)
90 {
91 	/* fill in the SAL procedure descriptor and point ia64_sal to it: */
92 	pdesc.addr = entry_point;
93 	pdesc.gpval = gpval;
94 	ia64_sal = (ia64_sal_handler) &pdesc;
95 }
96 
97 static void __init
98 check_versions (struct ia64_sal_systab *systab)
99 {
100 	sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor;
101 	sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor;
102 
103 	/* Check for broken firmware */
104 	if ((sal_revision == SAL_VERSION_CODE(49, 29))
105 	    && (sal_version == SAL_VERSION_CODE(49, 29)))
106 	{
107 		/*
108 		 * Old firmware for zx2000 prototypes have this weird version number,
109 		 * reset it to something sane.
110 		 */
111 		sal_revision = SAL_VERSION_CODE(2, 8);
112 		sal_version = SAL_VERSION_CODE(0, 0);
113 	}
114 }
115 
116 static void __init
117 sal_desc_entry_point (void *p)
118 {
119 	struct ia64_sal_desc_entry_point *ep = p;
120 	ia64_pal_handler_init(__va(ep->pal_proc));
121 	ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp));
122 }
123 
124 #ifdef CONFIG_SMP
125 static void __init
126 set_smp_redirect (int flag)
127 {
128 #ifndef CONFIG_HOTPLUG_CPU
129 	if (no_int_routing)
130 		smp_int_redirect &= ~flag;
131 	else
132 		smp_int_redirect |= flag;
133 #else
134 	/*
135 	 * For CPU Hotplug we dont want to do any chipset supported
136 	 * interrupt redirection. The reason is this would require that
137 	 * All interrupts be stopped and hard bind the irq to a cpu.
138 	 * Later when the interrupt is fired we need to set the redir hint
139 	 * on again in the vector. This is cumbersome for something that the
140 	 * user mode irq balancer will solve anyways.
141 	 */
142 	no_int_routing=1;
143 	smp_int_redirect &= ~flag;
144 #endif
145 }
146 #else
147 #define set_smp_redirect(flag)	do { } while (0)
148 #endif
149 
150 static void __init
151 sal_desc_platform_feature (void *p)
152 {
153 	struct ia64_sal_desc_platform_feature *pf = p;
154 	sal_platform_features = pf->feature_mask;
155 
156 	printk(KERN_INFO "SAL Platform features:");
157 	if (!sal_platform_features) {
158 		printk(" None\n");
159 		return;
160 	}
161 
162 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK)
163 		printk(" BusLock");
164 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) {
165 		printk(" IRQ_Redirection");
166 		set_smp_redirect(SMP_IRQ_REDIRECTION);
167 	}
168 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) {
169 		printk(" IPI_Redirection");
170 		set_smp_redirect(SMP_IPI_REDIRECTION);
171 	}
172 	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)
173 		printk(" ITC_Drift");
174 	printk("\n");
175 }
176 
177 #ifdef CONFIG_SMP
178 static void __init
179 sal_desc_ap_wakeup (void *p)
180 {
181 	struct ia64_sal_desc_ap_wakeup *ap = p;
182 
183 	switch (ap->mechanism) {
184 	case IA64_SAL_AP_EXTERNAL_INT:
185 		ap_wakeup_vector = ap->vector;
186 		printk(KERN_INFO "SAL: AP wakeup using external interrupt "
187 				"vector 0x%lx\n", ap_wakeup_vector);
188 		break;
189 	default:
190 		printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n");
191 		break;
192 	}
193 }
194 
195 static void __init
196 chk_nointroute_opt(void)
197 {
198 	char *cp;
199 
200 	for (cp = boot_command_line; *cp; ) {
201 		if (memcmp(cp, "nointroute", 10) == 0) {
202 			no_int_routing = 1;
203 			printk ("no_int_routing on\n");
204 			break;
205 		} else {
206 			while (*cp != ' ' && *cp)
207 				++cp;
208 			while (*cp == ' ')
209 				++cp;
210 		}
211 	}
212 }
213 
214 #else
215 static void __init sal_desc_ap_wakeup(void *p) { }
216 #endif
217 
218 /*
219  * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
220  * cr.ivr, but it never writes cr.eoi.  This leaves any interrupt marked as
221  * "in-service" and masks other interrupts of equal or lower priority.
222  *
223  * HP internal defect reports: F1859, F2775, F3031.
224  */
225 static int sal_cache_flush_drops_interrupts;
226 
227 static int __init
228 force_pal_cache_flush(char *str)
229 {
230 	sal_cache_flush_drops_interrupts = 1;
231 	return 0;
232 }
233 early_param("force_pal_cache_flush", force_pal_cache_flush);
234 
235 void __init
236 check_sal_cache_flush (void)
237 {
238 	unsigned long flags;
239 	int cpu;
240 	u64 vector, cache_type = 3;
241 	struct ia64_sal_retval isrv;
242 
243 	if (sal_cache_flush_drops_interrupts)
244 		return;
245 
246 	cpu = get_cpu();
247 	local_irq_save(flags);
248 
249 	/*
250 	 * Send ourselves a timer interrupt, wait until it's reported, and see
251 	 * if SAL_CACHE_FLUSH drops it.
252 	 */
253 	ia64_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
254 
255 	while (!ia64_get_irr(IA64_TIMER_VECTOR))
256 		cpu_relax();
257 
258 	SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
259 
260 	if (isrv.status)
261 		printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status);
262 
263 	if (ia64_get_irr(IA64_TIMER_VECTOR)) {
264 		vector = ia64_get_ivr();
265 		ia64_eoi();
266 		WARN_ON(vector != IA64_TIMER_VECTOR);
267 	} else {
268 		sal_cache_flush_drops_interrupts = 1;
269 		printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
270 			"PAL_CACHE_FLUSH will be used instead\n");
271 		ia64_eoi();
272 	}
273 
274 	local_irq_restore(flags);
275 	put_cpu();
276 }
277 
278 s64
279 ia64_sal_cache_flush (u64 cache_type)
280 {
281 	struct ia64_sal_retval isrv;
282 
283 	if (sal_cache_flush_drops_interrupts) {
284 		unsigned long flags;
285 		u64 progress;
286 		s64 rc;
287 
288 		progress = 0;
289 		local_irq_save(flags);
290 		rc = ia64_pal_cache_flush(cache_type,
291 			PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
292 		local_irq_restore(flags);
293 		return rc;
294 	}
295 
296 	SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
297 	return isrv.status;
298 }
299 EXPORT_SYMBOL_GPL(ia64_sal_cache_flush);
300 
301 void __init
302 ia64_sal_init (struct ia64_sal_systab *systab)
303 {
304 	char *p;
305 	int i;
306 
307 	if (!systab) {
308 		printk(KERN_WARNING "Hmm, no SAL System Table.\n");
309 		return;
310 	}
311 
312 	if (strncmp(systab->signature, "SST_", 4) != 0)
313 		printk(KERN_ERR "bad signature in system table!");
314 
315 	check_versions(systab);
316 #ifdef CONFIG_SMP
317 	chk_nointroute_opt();
318 #endif
319 
320 	/* revisions are coded in BCD, so %x does the job for us */
321 	printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n",
322 			SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision),
323 			systab->oem_id, systab->product_id,
324 			systab->product_id[0] ? " " : "",
325 			SAL_MAJOR(sal_version), SAL_MINOR(sal_version));
326 
327 	p = (char *) (systab + 1);
328 	for (i = 0; i < systab->entry_count; i++) {
329 		/*
330 		 * The first byte of each entry type contains the type
331 		 * descriptor.
332 		 */
333 		switch (*p) {
334 		case SAL_DESC_ENTRY_POINT:
335 			sal_desc_entry_point(p);
336 			break;
337 		case SAL_DESC_PLATFORM_FEATURE:
338 			sal_desc_platform_feature(p);
339 			break;
340 		case SAL_DESC_PTC:
341 			ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p;
342 			break;
343 		case SAL_DESC_AP_WAKEUP:
344 			sal_desc_ap_wakeup(p);
345 			break;
346 		}
347 		p += SAL_DESC_SIZE(*p);
348 	}
349 
350 }
351 
352 int
353 ia64_sal_oemcall(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
354 		 u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, u64 arg7)
355 {
356 	if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
357 		return -1;
358 	SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
359 	return 0;
360 }
361 EXPORT_SYMBOL(ia64_sal_oemcall);
362 
363 int
364 ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
365 			u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6,
366 			u64 arg7)
367 {
368 	if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
369 		return -1;
370 	SAL_CALL_NOLOCK(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
371 			arg7);
372 	return 0;
373 }
374 EXPORT_SYMBOL(ia64_sal_oemcall_nolock);
375 
376 int
377 ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc,
378 			   u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5,
379 			   u64 arg6, u64 arg7)
380 {
381 	if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
382 		return -1;
383 	SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
384 			   arg7);
385 	return 0;
386 }
387 EXPORT_SYMBOL(ia64_sal_oemcall_reentrant);
388 
389 long
390 ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
391 		    unsigned long *drift_info)
392 {
393 	struct ia64_sal_retval isrv;
394 
395 	SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
396 	*ticks_per_second = isrv.v0;
397 	*drift_info = isrv.v1;
398 	return isrv.status;
399 }
400 EXPORT_SYMBOL_GPL(ia64_sal_freq_base);
401