1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * This file contains the light-weight system call handlers (fsyscall-handlers). 4 * 5 * Copyright (C) 2003 Hewlett-Packard Co 6 * David Mosberger-Tang <davidm@hpl.hp.com> 7 * 8 * 25-Sep-03 davidm Implement fsys_rt_sigprocmask(). 9 * 18-Feb-03 louisk Implement fsys_gettimeofday(). 10 * 28-Feb-03 davidm Fixed several bugs in fsys_gettimeofday(). Tuned it some more, 11 * probably broke it along the way... ;-) 12 * 13-Jul-04 clameter Implement fsys_clock_gettime and revise fsys_gettimeofday to make 13 * it capable of using memory based clocks without falling back to C code. 14 * 08-Feb-07 Fenghua Yu Implement fsys_getcpu. 15 * 16 */ 17 18#include <asm/asmmacro.h> 19#include <asm/errno.h> 20#include <asm/asm-offsets.h> 21#include <asm/percpu.h> 22#include <asm/thread_info.h> 23#include <asm/sal.h> 24#include <asm/signal.h> 25#include <asm/unistd.h> 26 27#include "entry.h" 28#include <asm/native/inst.h> 29 30/* 31 * See Documentation/ia64/fsys.rst for details on fsyscalls. 32 * 33 * On entry to an fsyscall handler: 34 * r10 = 0 (i.e., defaults to "successful syscall return") 35 * r11 = saved ar.pfs (a user-level value) 36 * r15 = system call number 37 * r16 = "current" task pointer (in normal kernel-mode, this is in r13) 38 * r32-r39 = system call arguments 39 * b6 = return address (a user-level value) 40 * ar.pfs = previous frame-state (a user-level value) 41 * PSR.be = cleared to zero (i.e., little-endian byte order is in effect) 42 * all other registers may contain values passed in from user-mode 43 * 44 * On return from an fsyscall handler: 45 * r11 = saved ar.pfs (as passed into the fsyscall handler) 46 * r15 = system call number (as passed into the fsyscall handler) 47 * r32-r39 = system call arguments (as passed into the fsyscall handler) 48 * b6 = return address (as passed into the fsyscall handler) 49 * ar.pfs = previous frame-state (as passed into the fsyscall handler) 50 */ 51 52ENTRY(fsys_ni_syscall) 53 .prologue 54 .altrp b6 55 .body 56 mov r8=ENOSYS 57 mov r10=-1 58 FSYS_RETURN 59END(fsys_ni_syscall) 60 61ENTRY(fsys_getpid) 62 .prologue 63 .altrp b6 64 .body 65 add r17=IA64_TASK_SIGNAL_OFFSET,r16 66 ;; 67 ld8 r17=[r17] // r17 = current->signal 68 add r9=TI_FLAGS+IA64_TASK_SIZE,r16 69 ;; 70 ld4 r9=[r9] 71 add r17=IA64_SIGNAL_PIDS_TGID_OFFSET,r17 72 ;; 73 and r9=TIF_ALLWORK_MASK,r9 74 ld8 r17=[r17] // r17 = current->signal->pids[PIDTYPE_TGID] 75 ;; 76 add r8=IA64_PID_LEVEL_OFFSET,r17 77 ;; 78 ld4 r8=[r8] // r8 = pid->level 79 add r17=IA64_PID_UPID_OFFSET,r17 // r17 = &pid->numbers[0] 80 ;; 81 shl r8=r8,IA64_UPID_SHIFT 82 ;; 83 add r17=r17,r8 // r17 = &pid->numbers[pid->level] 84 ;; 85 ld4 r8=[r17] // r8 = pid->numbers[pid->level].nr 86 ;; 87 mov r17=0 88 ;; 89 cmp.ne p8,p0=0,r9 90(p8) br.spnt.many fsys_fallback_syscall 91 FSYS_RETURN 92END(fsys_getpid) 93 94ENTRY(fsys_set_tid_address) 95 .prologue 96 .altrp b6 97 .body 98 add r9=TI_FLAGS+IA64_TASK_SIZE,r16 99 add r17=IA64_TASK_THREAD_PID_OFFSET,r16 100 ;; 101 ld4 r9=[r9] 102 tnat.z p6,p7=r32 // check argument register for being NaT 103 ld8 r17=[r17] // r17 = current->thread_pid 104 ;; 105 and r9=TIF_ALLWORK_MASK,r9 106 add r8=IA64_PID_LEVEL_OFFSET,r17 107 add r18=IA64_TASK_CLEAR_CHILD_TID_OFFSET,r16 108 ;; 109 ld4 r8=[r8] // r8 = pid->level 110 add r17=IA64_PID_UPID_OFFSET,r17 // r17 = &pid->numbers[0] 111 ;; 112 shl r8=r8,IA64_UPID_SHIFT 113 ;; 114 add r17=r17,r8 // r17 = &pid->numbers[pid->level] 115 ;; 116 ld4 r8=[r17] // r8 = pid->numbers[pid->level].nr 117 ;; 118 cmp.ne p8,p0=0,r9 119 mov r17=-1 120 ;; 121(p6) st8 [r18]=r32 122(p7) st8 [r18]=r17 123(p8) br.spnt.many fsys_fallback_syscall 124 ;; 125 mov r17=0 // i must not leak kernel bits... 126 mov r18=0 // i must not leak kernel bits... 127 FSYS_RETURN 128END(fsys_set_tid_address) 129 130#if IA64_GTOD_SEQ_OFFSET !=0 131#error fsys_gettimeofday incompatible with changes to struct fsyscall_gtod_data_t 132#endif 133#if IA64_ITC_JITTER_OFFSET !=0 134#error fsys_gettimeofday incompatible with changes to struct itc_jitter_data_t 135#endif 136#define CLOCK_REALTIME 0 137#define CLOCK_MONOTONIC 1 138#define CLOCK_DIVIDE_BY_1000 0x4000 139#define CLOCK_ADD_MONOTONIC 0x8000 140 141ENTRY(fsys_gettimeofday) 142 .prologue 143 .altrp b6 144 .body 145 mov r31 = r32 146 tnat.nz p6,p0 = r33 // guard against NaT argument 147(p6) br.cond.spnt.few .fail_einval 148 mov r30 = CLOCK_DIVIDE_BY_1000 149 ;; 150.gettime: 151 // Register map 152 // Incoming r31 = pointer to address where to place result 153 // r30 = flags determining how time is processed 154 // r2,r3 = temp r4-r7 preserved 155 // r8 = result nanoseconds 156 // r9 = result seconds 157 // r10 = temporary storage for clock difference 158 // r11 = preserved: saved ar.pfs 159 // r12 = preserved: memory stack 160 // r13 = preserved: thread pointer 161 // r14 = address of mask / mask value 162 // r15 = preserved: system call number 163 // r16 = preserved: current task pointer 164 // r17 = (not used) 165 // r18 = (not used) 166 // r19 = address of itc_lastcycle 167 // r20 = struct fsyscall_gtod_data (= address of gtod_lock.sequence) 168 // r21 = address of mmio_ptr 169 // r22 = address of wall_time or monotonic_time 170 // r23 = address of shift / value 171 // r24 = address mult factor / cycle_last value 172 // r25 = itc_lastcycle value 173 // r26 = address clocksource cycle_last 174 // r27 = (not used) 175 // r28 = sequence number at the beginning of critical section 176 // r29 = address of itc_jitter 177 // r30 = time processing flags / memory address 178 // r31 = pointer to result 179 // Predicates 180 // p6,p7 short term use 181 // p8 = timesource ar.itc 182 // p9 = timesource mmio64 183 // p10 = timesource mmio32 - not used 184 // p11 = timesource not to be handled by asm code 185 // p12 = memory time source ( = p9 | p10) - not used 186 // p13 = do cmpxchg with itc_lastcycle 187 // p14 = Divide by 1000 188 // p15 = Add monotonic 189 // 190 // Note that instructions are optimized for McKinley. McKinley can 191 // process two bundles simultaneously and therefore we continuously 192 // try to feed the CPU two bundles and then a stop. 193 194 add r2 = TI_FLAGS+IA64_TASK_SIZE,r16 195 tnat.nz p6,p0 = r31 // guard against Nat argument 196(p6) br.cond.spnt.few .fail_einval 197 movl r20 = fsyscall_gtod_data // load fsyscall gettimeofday data address 198 ;; 199 ld4 r2 = [r2] // process work pending flags 200 movl r29 = itc_jitter_data // itc_jitter 201 add r22 = IA64_GTOD_WALL_TIME_OFFSET,r20 // wall_time 202 add r21 = IA64_CLKSRC_MMIO_OFFSET,r20 203 mov pr = r30,0xc000 // Set predicates according to function 204 ;; 205 and r2 = TIF_ALLWORK_MASK,r2 206 add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29 207(p15) add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20 // monotonic_time 208 ;; 209 add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20 // clksrc_cycle_last 210 cmp.ne p6, p0 = 0, r2 // Fallback if work is scheduled 211(p6) br.cond.spnt.many fsys_fallback_syscall 212 ;; 213 // Begin critical section 214.time_redo: 215 ld4.acq r28 = [r20] // gtod_lock.sequence, Must take first 216 ;; 217 and r28 = ~1,r28 // And make sequence even to force retry if odd 218 ;; 219 ld8 r30 = [r21] // clocksource->mmio_ptr 220 add r24 = IA64_CLKSRC_MULT_OFFSET,r20 221 ld4 r2 = [r29] // itc_jitter value 222 add r23 = IA64_CLKSRC_SHIFT_OFFSET,r20 223 add r14 = IA64_CLKSRC_MASK_OFFSET,r20 224 ;; 225 ld4 r3 = [r24] // clocksource mult value 226 ld8 r14 = [r14] // clocksource mask value 227 cmp.eq p8,p9 = 0,r30 // use cpu timer if no mmio_ptr 228 ;; 229 setf.sig f7 = r3 // Setup for mult scaling of counter 230(p8) cmp.ne p13,p0 = r2,r0 // need itc_jitter compensation, set p13 231 ld4 r23 = [r23] // clocksource shift value 232 ld8 r24 = [r26] // get clksrc_cycle_last value 233(p9) cmp.eq p13,p0 = 0,r30 // if mmio_ptr, clear p13 jitter control 234 ;; 235 .pred.rel.mutex p8,p9 236 MOV_FROM_ITC(p8, p6, r2, r10) // CPU_TIMER. 36 clocks latency!!! 237(p9) ld8 r2 = [r30] // MMIO_TIMER. Could also have latency issues.. 238(p13) ld8 r25 = [r19] // get itc_lastcycle value 239 ld8 r9 = [r22],IA64_TIME_SN_SPEC_SNSEC_OFFSET // sec 240 ;; 241 ld8 r8 = [r22],-IA64_TIME_SN_SPEC_SNSEC_OFFSET // snsec 242(p13) sub r3 = r25,r2 // Diff needed before comparison (thanks davidm) 243 ;; 244(p13) cmp.gt.unc p6,p7 = r3,r0 // check if it is less than last. p6,p7 cleared 245 sub r10 = r2,r24 // current_cycle - last_cycle 246 ;; 247(p6) sub r10 = r25,r24 // time we got was less than last_cycle 248(p7) mov ar.ccv = r25 // more than last_cycle. Prep for cmpxchg 249 ;; 250(p7) cmpxchg8.rel r3 = [r19],r2,ar.ccv 251 ;; 252(p7) cmp.ne p7,p0 = r25,r3 // if cmpxchg not successful 253 ;; 254(p7) sub r10 = r3,r24 // then use new last_cycle instead 255 ;; 256 and r10 = r10,r14 // Apply mask 257 ;; 258 setf.sig f8 = r10 259 nop.i 123 260 ;; 261 // fault check takes 5 cycles and we have spare time 262EX(.fail_efault, probe.w.fault r31, 3) 263 xmpy.l f8 = f8,f7 // nsec_per_cyc*(counter-last_counter) 264 ;; 265 getf.sig r2 = f8 266 mf 267 ;; 268 ld4 r10 = [r20] // gtod_lock.sequence 269 add r8 = r8,r2 // Add xtime.nsecs 270 ;; 271 shr.u r8 = r8,r23 // shift by factor 272 cmp4.ne p7,p0 = r28,r10 273(p7) br.cond.dpnt.few .time_redo // sequence number changed, redo 274 // End critical section. 275 // Now r8=tv->tv_nsec and r9=tv->tv_sec 276 mov r10 = r0 277 movl r2 = 1000000000 278 add r23 = IA64_TIMESPEC_TV_NSEC_OFFSET, r31 279(p14) movl r3 = 2361183241434822607 // Prep for / 1000 hack 280 ;; 281.time_normalize: 282 mov r21 = r8 283 cmp.ge p6,p0 = r8,r2 284(p14) shr.u r20 = r8, 3 // We can repeat this if necessary just wasting time 285 ;; 286(p14) setf.sig f8 = r20 287(p6) sub r8 = r8,r2 288(p6) add r9 = 1,r9 // two nops before the branch. 289(p14) setf.sig f7 = r3 // Chances for repeats are 1 in 10000 for gettod 290(p6) br.cond.dpnt.few .time_normalize 291 ;; 292 // Divided by 8 though shift. Now divide by 125 293 // The compiler was able to do that with a multiply 294 // and a shift and we do the same 295EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles 296(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it 297 ;; 298(p14) getf.sig r2 = f8 299 ;; 300 mov r8 = r0 301(p14) shr.u r21 = r2, 4 302 ;; 303EX(.fail_efault, st8 [r31] = r9) 304EX(.fail_efault, st8 [r23] = r21) 305 FSYS_RETURN 306.fail_einval: 307 mov r8 = EINVAL 308 mov r10 = -1 309 FSYS_RETURN 310.fail_efault: 311 mov r8 = EFAULT 312 mov r10 = -1 313 FSYS_RETURN 314END(fsys_gettimeofday) 315 316ENTRY(fsys_clock_gettime) 317 .prologue 318 .altrp b6 319 .body 320 cmp4.ltu p6, p0 = CLOCK_MONOTONIC, r32 321 // Fallback if this is not CLOCK_REALTIME or CLOCK_MONOTONIC 322(p6) br.spnt.few fsys_fallback_syscall 323 mov r31 = r33 324 shl r30 = r32,15 325 br.many .gettime 326END(fsys_clock_gettime) 327 328/* 329 * fsys_getcpu doesn't use the third parameter in this implementation. It reads 330 * current_thread_info()->cpu and corresponding node in cpu_to_node_map. 331 */ 332ENTRY(fsys_getcpu) 333 .prologue 334 .altrp b6 335 .body 336 ;; 337 add r2=TI_FLAGS+IA64_TASK_SIZE,r16 338 tnat.nz p6,p0 = r32 // guard against NaT argument 339 add r3=TI_CPU+IA64_TASK_SIZE,r16 340 ;; 341 ld4 r3=[r3] // M r3 = thread_info->cpu 342 ld4 r2=[r2] // M r2 = thread_info->flags 343(p6) br.cond.spnt.few .fail_einval // B 344 ;; 345 tnat.nz p7,p0 = r33 // I guard against NaT argument 346(p7) br.cond.spnt.few .fail_einval // B 347 ;; 348 cmp.ne p6,p0=r32,r0 349 cmp.ne p7,p0=r33,r0 350 ;; 351#ifdef CONFIG_NUMA 352 movl r17=cpu_to_node_map 353 ;; 354EX(.fail_efault, (p6) probe.w.fault r32, 3) // M This takes 5 cycles 355EX(.fail_efault, (p7) probe.w.fault r33, 3) // M This takes 5 cycles 356 shladd r18=r3,1,r17 357 ;; 358 ld2 r20=[r18] // r20 = cpu_to_node_map[cpu] 359 and r2 = TIF_ALLWORK_MASK,r2 360 ;; 361 cmp.ne p8,p0=0,r2 362(p8) br.spnt.many fsys_fallback_syscall 363 ;; 364 ;; 365EX(.fail_efault, (p6) st4 [r32] = r3) 366EX(.fail_efault, (p7) st2 [r33] = r20) 367 mov r8=0 368 ;; 369#else 370EX(.fail_efault, (p6) probe.w.fault r32, 3) // M This takes 5 cycles 371EX(.fail_efault, (p7) probe.w.fault r33, 3) // M This takes 5 cycles 372 and r2 = TIF_ALLWORK_MASK,r2 373 ;; 374 cmp.ne p8,p0=0,r2 375(p8) br.spnt.many fsys_fallback_syscall 376 ;; 377EX(.fail_efault, (p6) st4 [r32] = r3) 378EX(.fail_efault, (p7) st2 [r33] = r0) 379 mov r8=0 380 ;; 381#endif 382 FSYS_RETURN 383END(fsys_getcpu) 384 385ENTRY(fsys_fallback_syscall) 386 .prologue 387 .altrp b6 388 .body 389 /* 390 * We only get here from light-weight syscall handlers. Thus, we already 391 * know that r15 contains a valid syscall number. No need to re-check. 392 */ 393 adds r17=-1024,r15 394 movl r14=sys_call_table 395 ;; 396 RSM_PSR_I(p0, r26, r27) 397 shladd r18=r17,3,r14 398 ;; 399 ld8 r18=[r18] // load normal (heavy-weight) syscall entry-point 400 MOV_FROM_PSR(p0, r29, r26) // read psr (12 cyc load latency) 401 mov r27=ar.rsc 402 mov r21=ar.fpsr 403 mov r26=ar.pfs 404END(fsys_fallback_syscall) 405 /* FALL THROUGH */ 406GLOBAL_ENTRY(fsys_bubble_down) 407 .prologue 408 .altrp b6 409 .body 410 /* 411 * We get here for syscalls that don't have a lightweight 412 * handler. For those, we need to bubble down into the kernel 413 * and that requires setting up a minimal pt_regs structure, 414 * and initializing the CPU state more or less as if an 415 * interruption had occurred. To make syscall-restarts work, 416 * we setup pt_regs such that cr_iip points to the second 417 * instruction in syscall_via_break. Decrementing the IP 418 * hence will restart the syscall via break and not 419 * decrementing IP will return us to the caller, as usual. 420 * Note that we preserve the value of psr.pp rather than 421 * initializing it from dcr.pp. This makes it possible to 422 * distinguish fsyscall execution from other privileged 423 * execution. 424 * 425 * On entry: 426 * - normal fsyscall handler register usage, except 427 * that we also have: 428 * - r18: address of syscall entry point 429 * - r21: ar.fpsr 430 * - r26: ar.pfs 431 * - r27: ar.rsc 432 * - r29: psr 433 * 434 * We used to clear some PSR bits here but that requires slow 435 * serialization. Fortunately, that isn't really necessary. 436 * The rationale is as follows: we used to clear bits 437 * ~PSR_PRESERVED_BITS in PSR.L. Since 438 * PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we 439 * ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}. 440 * However, 441 * 442 * PSR.BE : already is turned off in __kernel_syscall_via_epc() 443 * PSR.AC : don't care (kernel normally turns PSR.AC on) 444 * PSR.I : already turned off by the time fsys_bubble_down gets 445 * invoked 446 * PSR.DFL: always 0 (kernel never turns it on) 447 * PSR.DFH: don't care --- kernel never touches f32-f127 on its own 448 * initiative 449 * PSR.DI : always 0 (kernel never turns it on) 450 * PSR.SI : always 0 (kernel never turns it on) 451 * PSR.DB : don't care --- kernel never enables kernel-level 452 * breakpoints 453 * PSR.TB : must be 0 already; if it wasn't zero on entry to 454 * __kernel_syscall_via_epc, the branch to fsys_bubble_down 455 * will trigger a taken branch; the taken-trap-handler then 456 * converts the syscall into a break-based system-call. 457 */ 458 /* 459 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc. 460 * The rest we have to synthesize. 461 */ 462# define PSR_ONE_BITS ((3 << IA64_PSR_CPL0_BIT) \ 463 | (0x1 << IA64_PSR_RI_BIT) \ 464 | IA64_PSR_BN | IA64_PSR_I) 465 466 invala // M0|1 467 movl r14=ia64_ret_from_syscall // X 468 469 nop.m 0 470 movl r28=__kernel_syscall_via_break // X create cr.iip 471 ;; 472 473 mov r2=r16 // A get task addr to addl-addressable register 474 adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // A 475 mov r31=pr // I0 save pr (2 cyc) 476 ;; 477 st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag 478 addl r22=IA64_RBS_OFFSET,r2 // A compute base of RBS 479 add r3=TI_FLAGS+IA64_TASK_SIZE,r2 // A 480 ;; 481 ld4 r3=[r3] // M0|1 r3 = current_thread_info()->flags 482 lfetch.fault.excl.nt1 [r22] // M0|1 prefetch register backing-store 483 nop.i 0 484 ;; 485 mov ar.rsc=0 // M2 set enforced lazy mode, pl 0, LE, loadrs=0 486#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE 487 MOV_FROM_ITC(p0, p6, r30, r23) // M get cycle for accounting 488#else 489 nop.m 0 490#endif 491 nop.i 0 492 ;; 493 mov r23=ar.bspstore // M2 (12 cyc) save ar.bspstore 494 mov.m r24=ar.rnat // M2 (5 cyc) read ar.rnat (dual-issues!) 495 nop.i 0 496 ;; 497 mov ar.bspstore=r22 // M2 (6 cyc) switch to kernel RBS 498 movl r8=PSR_ONE_BITS // X 499 ;; 500 mov r25=ar.unat // M2 (5 cyc) save ar.unat 501 mov r19=b6 // I0 save b6 (2 cyc) 502 mov r20=r1 // A save caller's gp in r20 503 ;; 504 or r29=r8,r29 // A construct cr.ipsr value to save 505 mov b6=r18 // I0 copy syscall entry-point to b6 (7 cyc) 506 addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // A compute base of memory stack 507 508 mov r18=ar.bsp // M2 save (kernel) ar.bsp (12 cyc) 509 cmp.ne pKStk,pUStk=r0,r0 // A set pKStk <- 0, pUStk <- 1 510 br.call.sptk.many b7=ia64_syscall_setup // B 511 ;; 512#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE 513 // mov.m r30=ar.itc is called in advance 514 add r16=TI_AC_STAMP+IA64_TASK_SIZE,r2 515 add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r2 516 ;; 517 ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP // time at last check in kernel 518 ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE // time at leave kernel 519 ;; 520 ld8 r20=[r16],TI_AC_STAMP-TI_AC_STIME // cumulated stime 521 ld8 r21=[r17] // cumulated utime 522 sub r22=r19,r18 // stime before leave kernel 523 ;; 524 st8 [r16]=r30,TI_AC_STIME-TI_AC_STAMP // update stamp 525 sub r18=r30,r19 // elapsed time in user mode 526 ;; 527 add r20=r20,r22 // sum stime 528 add r21=r21,r18 // sum utime 529 ;; 530 st8 [r16]=r20 // update stime 531 st8 [r17]=r21 // update utime 532 ;; 533#endif 534 mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0 535 mov rp=r14 // I0 set the real return addr 536 and r3=_TIF_SYSCALL_TRACEAUDIT,r3 // A 537 ;; 538 SSM_PSR_I(p0, p6, r22) // M2 we're on kernel stacks now, reenable irqs 539 cmp.eq p8,p0=r3,r0 // A 540(p10) br.cond.spnt.many ia64_ret_from_syscall // B return if bad call-frame or r15 is a NaT 541 542 nop.m 0 543(p8) br.call.sptk.many b6=b6 // B (ignore return address) 544 br.cond.spnt ia64_trace_syscall // B 545END(fsys_bubble_down) 546 547 .rodata 548 .align 8 549 .globl fsyscall_table 550 551 data8 fsys_bubble_down 552fsyscall_table: 553 data8 fsys_ni_syscall 554 data8 0 // exit // 1025 555 data8 0 // read 556 data8 0 // write 557 data8 0 // open 558 data8 0 // close 559 data8 0 // creat // 1030 560 data8 0 // link 561 data8 0 // unlink 562 data8 0 // execve 563 data8 0 // chdir 564 data8 0 // fchdir // 1035 565 data8 0 // utimes 566 data8 0 // mknod 567 data8 0 // chmod 568 data8 0 // chown 569 data8 0 // lseek // 1040 570 data8 fsys_getpid // getpid 571 data8 0 // getppid 572 data8 0 // mount 573 data8 0 // umount 574 data8 0 // setuid // 1045 575 data8 0 // getuid 576 data8 0 // geteuid 577 data8 0 // ptrace 578 data8 0 // access 579 data8 0 // sync // 1050 580 data8 0 // fsync 581 data8 0 // fdatasync 582 data8 0 // kill 583 data8 0 // rename 584 data8 0 // mkdir // 1055 585 data8 0 // rmdir 586 data8 0 // dup 587 data8 0 // pipe 588 data8 0 // times 589 data8 0 // brk // 1060 590 data8 0 // setgid 591 data8 0 // getgid 592 data8 0 // getegid 593 data8 0 // acct 594 data8 0 // ioctl // 1065 595 data8 0 // fcntl 596 data8 0 // umask 597 data8 0 // chroot 598 data8 0 // ustat 599 data8 0 // dup2 // 1070 600 data8 0 // setreuid 601 data8 0 // setregid 602 data8 0 // getresuid 603 data8 0 // setresuid 604 data8 0 // getresgid // 1075 605 data8 0 // setresgid 606 data8 0 // getgroups 607 data8 0 // setgroups 608 data8 0 // getpgid 609 data8 0 // setpgid // 1080 610 data8 0 // setsid 611 data8 0 // getsid 612 data8 0 // sethostname 613 data8 0 // setrlimit 614 data8 0 // getrlimit // 1085 615 data8 0 // getrusage 616 data8 fsys_gettimeofday // gettimeofday 617 data8 0 // settimeofday 618 data8 0 // select 619 data8 0 // poll // 1090 620 data8 0 // symlink 621 data8 0 // readlink 622 data8 0 // uselib 623 data8 0 // swapon 624 data8 0 // swapoff // 1095 625 data8 0 // reboot 626 data8 0 // truncate 627 data8 0 // ftruncate 628 data8 0 // fchmod 629 data8 0 // fchown // 1100 630 data8 0 // getpriority 631 data8 0 // setpriority 632 data8 0 // statfs 633 data8 0 // fstatfs 634 data8 0 // gettid // 1105 635 data8 0 // semget 636 data8 0 // semop 637 data8 0 // semctl 638 data8 0 // msgget 639 data8 0 // msgsnd // 1110 640 data8 0 // msgrcv 641 data8 0 // msgctl 642 data8 0 // shmget 643 data8 0 // shmat 644 data8 0 // shmdt // 1115 645 data8 0 // shmctl 646 data8 0 // syslog 647 data8 0 // setitimer 648 data8 0 // getitimer 649 data8 0 // 1120 650 data8 0 651 data8 0 652 data8 0 // vhangup 653 data8 0 // lchown 654 data8 0 // remap_file_pages // 1125 655 data8 0 // wait4 656 data8 0 // sysinfo 657 data8 0 // clone 658 data8 0 // setdomainname 659 data8 0 // newuname // 1130 660 data8 0 // adjtimex 661 data8 0 662 data8 0 // init_module 663 data8 0 // delete_module 664 data8 0 // 1135 665 data8 0 666 data8 0 // quotactl 667 data8 0 // bdflush 668 data8 0 // sysfs 669 data8 0 // personality // 1140 670 data8 0 // afs_syscall 671 data8 0 // setfsuid 672 data8 0 // setfsgid 673 data8 0 // getdents 674 data8 0 // flock // 1145 675 data8 0 // readv 676 data8 0 // writev 677 data8 0 // pread64 678 data8 0 // pwrite64 679 data8 0 // sysctl // 1150 680 data8 0 // mmap 681 data8 0 // munmap 682 data8 0 // mlock 683 data8 0 // mlockall 684 data8 0 // mprotect // 1155 685 data8 0 // mremap 686 data8 0 // msync 687 data8 0 // munlock 688 data8 0 // munlockall 689 data8 0 // sched_getparam // 1160 690 data8 0 // sched_setparam 691 data8 0 // sched_getscheduler 692 data8 0 // sched_setscheduler 693 data8 0 // sched_yield 694 data8 0 // sched_get_priority_max // 1165 695 data8 0 // sched_get_priority_min 696 data8 0 // sched_rr_get_interval 697 data8 0 // nanosleep 698 data8 0 // nfsservctl 699 data8 0 // prctl // 1170 700 data8 0 // getpagesize 701 data8 0 // mmap2 702 data8 0 // pciconfig_read 703 data8 0 // pciconfig_write 704 data8 0 // perfmonctl // 1175 705 data8 0 // sigaltstack 706 data8 0 // rt_sigaction 707 data8 0 // rt_sigpending 708 data8 0 // rt_sigprocmask 709 data8 0 // rt_sigqueueinfo // 1180 710 data8 0 // rt_sigreturn 711 data8 0 // rt_sigsuspend 712 data8 0 // rt_sigtimedwait 713 data8 0 // getcwd 714 data8 0 // capget // 1185 715 data8 0 // capset 716 data8 0 // sendfile 717 data8 0 718 data8 0 719 data8 0 // socket // 1190 720 data8 0 // bind 721 data8 0 // connect 722 data8 0 // listen 723 data8 0 // accept 724 data8 0 // getsockname // 1195 725 data8 0 // getpeername 726 data8 0 // socketpair 727 data8 0 // send 728 data8 0 // sendto 729 data8 0 // recv // 1200 730 data8 0 // recvfrom 731 data8 0 // shutdown 732 data8 0 // setsockopt 733 data8 0 // getsockopt 734 data8 0 // sendmsg // 1205 735 data8 0 // recvmsg 736 data8 0 // pivot_root 737 data8 0 // mincore 738 data8 0 // madvise 739 data8 0 // newstat // 1210 740 data8 0 // newlstat 741 data8 0 // newfstat 742 data8 0 // clone2 743 data8 0 // getdents64 744 data8 0 // getunwind // 1215 745 data8 0 // readahead 746 data8 0 // setxattr 747 data8 0 // lsetxattr 748 data8 0 // fsetxattr 749 data8 0 // getxattr // 1220 750 data8 0 // lgetxattr 751 data8 0 // fgetxattr 752 data8 0 // listxattr 753 data8 0 // llistxattr 754 data8 0 // flistxattr // 1225 755 data8 0 // removexattr 756 data8 0 // lremovexattr 757 data8 0 // fremovexattr 758 data8 0 // tkill 759 data8 0 // futex // 1230 760 data8 0 // sched_setaffinity 761 data8 0 // sched_getaffinity 762 data8 fsys_set_tid_address // set_tid_address 763 data8 0 // fadvise64_64 764 data8 0 // tgkill // 1235 765 data8 0 // exit_group 766 data8 0 // lookup_dcookie 767 data8 0 // io_setup 768 data8 0 // io_destroy 769 data8 0 // io_getevents // 1240 770 data8 0 // io_submit 771 data8 0 // io_cancel 772 data8 0 // epoll_create 773 data8 0 // epoll_ctl 774 data8 0 // epoll_wait // 1245 775 data8 0 // restart_syscall 776 data8 0 // semtimedop 777 data8 0 // timer_create 778 data8 0 // timer_settime 779 data8 0 // timer_gettime // 1250 780 data8 0 // timer_getoverrun 781 data8 0 // timer_delete 782 data8 0 // clock_settime 783 data8 fsys_clock_gettime // clock_gettime 784 data8 0 // clock_getres // 1255 785 data8 0 // clock_nanosleep 786 data8 0 // fstatfs64 787 data8 0 // statfs64 788 data8 0 // mbind 789 data8 0 // get_mempolicy // 1260 790 data8 0 // set_mempolicy 791 data8 0 // mq_open 792 data8 0 // mq_unlink 793 data8 0 // mq_timedsend 794 data8 0 // mq_timedreceive // 1265 795 data8 0 // mq_notify 796 data8 0 // mq_getsetattr 797 data8 0 // kexec_load 798 data8 0 // vserver 799 data8 0 // waitid // 1270 800 data8 0 // add_key 801 data8 0 // request_key 802 data8 0 // keyctl 803 data8 0 // ioprio_set 804 data8 0 // ioprio_get // 1275 805 data8 0 // move_pages 806 data8 0 // inotify_init 807 data8 0 // inotify_add_watch 808 data8 0 // inotify_rm_watch 809 data8 0 // migrate_pages // 1280 810 data8 0 // openat 811 data8 0 // mkdirat 812 data8 0 // mknodat 813 data8 0 // fchownat 814 data8 0 // futimesat // 1285 815 data8 0 // newfstatat 816 data8 0 // unlinkat 817 data8 0 // renameat 818 data8 0 // linkat 819 data8 0 // symlinkat // 1290 820 data8 0 // readlinkat 821 data8 0 // fchmodat 822 data8 0 // faccessat 823 data8 0 824 data8 0 // 1295 825 data8 0 // unshare 826 data8 0 // splice 827 data8 0 // set_robust_list 828 data8 0 // get_robust_list 829 data8 0 // sync_file_range // 1300 830 data8 0 // tee 831 data8 0 // vmsplice 832 data8 0 833 data8 fsys_getcpu // getcpu // 1304 834 835 // fill in zeros for the remaining entries 836 .zero: 837 .space fsyscall_table + 8*NR_syscalls - .zero, 0 838