xref: /openbmc/linux/arch/ia64/kernel/entry.S (revision 8730046c)
1/*
2 * arch/ia64/kernel/entry.S
3 *
4 * Kernel entry points.
5 *
6 * Copyright (C) 1998-2003, 2005 Hewlett-Packard Co
7 *	David Mosberger-Tang <davidm@hpl.hp.com>
8 * Copyright (C) 1999, 2002-2003
9 *	Asit Mallick <Asit.K.Mallick@intel.com>
10 * 	Don Dugger <Don.Dugger@intel.com>
11 *	Suresh Siddha <suresh.b.siddha@intel.com>
12 *	Fenghua Yu <fenghua.yu@intel.com>
13 * Copyright (C) 1999 VA Linux Systems
14 * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
15 */
16/*
17 * ia64_switch_to now places correct virtual mapping in in TR2 for
18 * kernel stack. This allows us to handle interrupts without changing
19 * to physical mode.
20 *
21 * Jonathan Nicklin	<nicklin@missioncriticallinux.com>
22 * Patrick O'Rourke	<orourke@missioncriticallinux.com>
23 * 11/07/2000
24 */
25/*
26 * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
27 *                    VA Linux Systems Japan K.K.
28 *                    pv_ops.
29 */
30/*
31 * Global (preserved) predicate usage on syscall entry/exit path:
32 *
33 *	pKStk:		See entry.h.
34 *	pUStk:		See entry.h.
35 *	pSys:		See entry.h.
36 *	pNonSys:	!pSys
37 */
38
39
40#include <asm/asmmacro.h>
41#include <asm/cache.h>
42#include <asm/errno.h>
43#include <asm/kregs.h>
44#include <asm/asm-offsets.h>
45#include <asm/pgtable.h>
46#include <asm/percpu.h>
47#include <asm/processor.h>
48#include <asm/thread_info.h>
49#include <asm/unistd.h>
50#include <asm/ftrace.h>
51#include <asm/export.h>
52
53#include "minstate.h"
54
55	/*
56	 * execve() is special because in case of success, we need to
57	 * setup a null register window frame.
58	 */
59ENTRY(ia64_execve)
60	/*
61	 * Allocate 8 input registers since ptrace() may clobber them
62	 */
63	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
64	alloc loc1=ar.pfs,8,2,3,0
65	mov loc0=rp
66	.body
67	mov out0=in0			// filename
68	;;				// stop bit between alloc and call
69	mov out1=in1			// argv
70	mov out2=in2			// envp
71	br.call.sptk.many rp=sys_execve
72.ret0:
73	cmp4.ge p6,p7=r8,r0
74	mov ar.pfs=loc1			// restore ar.pfs
75	sxt4 r8=r8			// return 64-bit result
76	;;
77	stf.spill [sp]=f0
78	mov rp=loc0
79(p6)	mov ar.pfs=r0			// clear ar.pfs on success
80(p7)	br.ret.sptk.many rp
81
82	/*
83	 * In theory, we'd have to zap this state only to prevent leaking of
84	 * security sensitive state (e.g., if current->mm->dumpable is zero).  However,
85	 * this executes in less than 20 cycles even on Itanium, so it's not worth
86	 * optimizing for...).
87	 */
88	mov ar.unat=0; 		mov ar.lc=0
89	mov r4=0;		mov f2=f0;		mov b1=r0
90	mov r5=0;		mov f3=f0;		mov b2=r0
91	mov r6=0;		mov f4=f0;		mov b3=r0
92	mov r7=0;		mov f5=f0;		mov b4=r0
93	ldf.fill f12=[sp];	mov f13=f0;		mov b5=r0
94	ldf.fill f14=[sp];	ldf.fill f15=[sp];	mov f16=f0
95	ldf.fill f17=[sp];	ldf.fill f18=[sp];	mov f19=f0
96	ldf.fill f20=[sp];	ldf.fill f21=[sp];	mov f22=f0
97	ldf.fill f23=[sp];	ldf.fill f24=[sp];	mov f25=f0
98	ldf.fill f26=[sp];	ldf.fill f27=[sp];	mov f28=f0
99	ldf.fill f29=[sp];	ldf.fill f30=[sp];	mov f31=f0
100	br.ret.sptk.many rp
101END(ia64_execve)
102
103/*
104 * sys_clone2(u64 flags, u64 ustack_base, u64 ustack_size, u64 parent_tidptr, u64 child_tidptr,
105 *	      u64 tls)
106 */
107GLOBAL_ENTRY(sys_clone2)
108	/*
109	 * Allocate 8 input registers since ptrace() may clobber them
110	 */
111	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
112	alloc r16=ar.pfs,8,2,6,0
113	DO_SAVE_SWITCH_STACK
114	adds r2=PT(R16)+IA64_SWITCH_STACK_SIZE+16,sp
115	mov loc0=rp
116	mov loc1=r16				// save ar.pfs across do_fork
117	.body
118	mov out1=in1
119	mov out2=in2
120	tbit.nz p6,p0=in0,CLONE_SETTLS_BIT
121	mov out3=in3	// parent_tidptr: valid only w/CLONE_PARENT_SETTID
122	;;
123(p6)	st8 [r2]=in5				// store TLS in r16 for copy_thread()
124	mov out4=in4	// child_tidptr:  valid only w/CLONE_CHILD_SETTID or CLONE_CHILD_CLEARTID
125	mov out0=in0				// out0 = clone_flags
126	br.call.sptk.many rp=do_fork
127.ret1:	.restore sp
128	adds sp=IA64_SWITCH_STACK_SIZE,sp	// pop the switch stack
129	mov ar.pfs=loc1
130	mov rp=loc0
131	br.ret.sptk.many rp
132END(sys_clone2)
133
134/*
135 * sys_clone(u64 flags, u64 ustack_base, u64 parent_tidptr, u64 child_tidptr, u64 tls)
136 *	Deprecated.  Use sys_clone2() instead.
137 */
138GLOBAL_ENTRY(sys_clone)
139	/*
140	 * Allocate 8 input registers since ptrace() may clobber them
141	 */
142	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
143	alloc r16=ar.pfs,8,2,6,0
144	DO_SAVE_SWITCH_STACK
145	adds r2=PT(R16)+IA64_SWITCH_STACK_SIZE+16,sp
146	mov loc0=rp
147	mov loc1=r16				// save ar.pfs across do_fork
148	.body
149	mov out1=in1
150	mov out2=16				// stacksize (compensates for 16-byte scratch area)
151	tbit.nz p6,p0=in0,CLONE_SETTLS_BIT
152	mov out3=in2	// parent_tidptr: valid only w/CLONE_PARENT_SETTID
153	;;
154(p6)	st8 [r2]=in4				// store TLS in r13 (tp)
155	mov out4=in3	// child_tidptr:  valid only w/CLONE_CHILD_SETTID or CLONE_CHILD_CLEARTID
156	mov out0=in0				// out0 = clone_flags
157	br.call.sptk.many rp=do_fork
158.ret2:	.restore sp
159	adds sp=IA64_SWITCH_STACK_SIZE,sp	// pop the switch stack
160	mov ar.pfs=loc1
161	mov rp=loc0
162	br.ret.sptk.many rp
163END(sys_clone)
164
165/*
166 * prev_task <- ia64_switch_to(struct task_struct *next)
167 *	With Ingo's new scheduler, interrupts are disabled when this routine gets
168 *	called.  The code starting at .map relies on this.  The rest of the code
169 *	doesn't care about the interrupt masking status.
170 */
171GLOBAL_ENTRY(ia64_switch_to)
172	.prologue
173	alloc r16=ar.pfs,1,0,0,0
174	DO_SAVE_SWITCH_STACK
175	.body
176
177	adds r22=IA64_TASK_THREAD_KSP_OFFSET,r13
178	movl r25=init_task
179	mov r27=IA64_KR(CURRENT_STACK)
180	adds r21=IA64_TASK_THREAD_KSP_OFFSET,in0
181	dep r20=0,in0,61,3		// physical address of "next"
182	;;
183	st8 [r22]=sp			// save kernel stack pointer of old task
184	shr.u r26=r20,IA64_GRANULE_SHIFT
185	cmp.eq p7,p6=r25,in0
186	;;
187	/*
188	 * If we've already mapped this task's page, we can skip doing it again.
189	 */
190(p6)	cmp.eq p7,p6=r26,r27
191(p6)	br.cond.dpnt .map
192	;;
193.done:
194	ld8 sp=[r21]			// load kernel stack pointer of new task
195	MOV_TO_KR(CURRENT, in0, r8, r9)		// update "current" application register
196	mov r8=r13			// return pointer to previously running task
197	mov r13=in0			// set "current" pointer
198	;;
199	DO_LOAD_SWITCH_STACK
200
201#ifdef CONFIG_SMP
202	sync.i				// ensure "fc"s done by this CPU are visible on other CPUs
203#endif
204	br.ret.sptk.many rp		// boogie on out in new context
205
206.map:
207	RSM_PSR_IC(r25)			// interrupts (psr.i) are already disabled here
208	movl r25=PAGE_KERNEL
209	;;
210	srlz.d
211	or r23=r25,r20			// construct PA | page properties
212	mov r25=IA64_GRANULE_SHIFT<<2
213	;;
214	MOV_TO_ITIR(p0, r25, r8)
215	MOV_TO_IFA(in0, r8)		// VA of next task...
216	;;
217	mov r25=IA64_TR_CURRENT_STACK
218	MOV_TO_KR(CURRENT_STACK, r26, r8, r9)	// remember last page we mapped...
219	;;
220	itr.d dtr[r25]=r23		// wire in new mapping...
221	SSM_PSR_IC_AND_SRLZ_D(r8, r9)	// reenable the psr.ic bit
222	br.cond.sptk .done
223END(ia64_switch_to)
224
225/*
226 * Note that interrupts are enabled during save_switch_stack and load_switch_stack.  This
227 * means that we may get an interrupt with "sp" pointing to the new kernel stack while
228 * ar.bspstore is still pointing to the old kernel backing store area.  Since ar.rsc,
229 * ar.rnat, ar.bsp, and ar.bspstore are all preserved by interrupts, this is not a
230 * problem.  Also, we don't need to specify unwind information for preserved registers
231 * that are not modified in save_switch_stack as the right unwind information is already
232 * specified at the call-site of save_switch_stack.
233 */
234
235/*
236 * save_switch_stack:
237 *	- r16 holds ar.pfs
238 *	- b7 holds address to return to
239 *	- rp (b0) holds return address to save
240 */
241GLOBAL_ENTRY(save_switch_stack)
242	.prologue
243	.altrp b7
244	flushrs			// flush dirty regs to backing store (must be first in insn group)
245	.save @priunat,r17
246	mov r17=ar.unat		// preserve caller's
247	.body
248#ifdef CONFIG_ITANIUM
249	adds r2=16+128,sp
250	adds r3=16+64,sp
251	adds r14=SW(R4)+16,sp
252	;;
253	st8.spill [r14]=r4,16		// spill r4
254	lfetch.fault.excl.nt1 [r3],128
255	;;
256	lfetch.fault.excl.nt1 [r2],128
257	lfetch.fault.excl.nt1 [r3],128
258	;;
259	lfetch.fault.excl [r2]
260	lfetch.fault.excl [r3]
261	adds r15=SW(R5)+16,sp
262#else
263	add r2=16+3*128,sp
264	add r3=16,sp
265	add r14=SW(R4)+16,sp
266	;;
267	st8.spill [r14]=r4,SW(R6)-SW(R4)	// spill r4 and prefetch offset 0x1c0
268	lfetch.fault.excl.nt1 [r3],128	//		prefetch offset 0x010
269	;;
270	lfetch.fault.excl.nt1 [r3],128	//		prefetch offset 0x090
271	lfetch.fault.excl.nt1 [r2],128	//		prefetch offset 0x190
272	;;
273	lfetch.fault.excl.nt1 [r3]	//		prefetch offset 0x110
274	lfetch.fault.excl.nt1 [r2]	//		prefetch offset 0x210
275	adds r15=SW(R5)+16,sp
276#endif
277	;;
278	st8.spill [r15]=r5,SW(R7)-SW(R5)	// spill r5
279	mov.m ar.rsc=0			// put RSE in mode: enforced lazy, little endian, pl 0
280	add r2=SW(F2)+16,sp		// r2 = &sw->f2
281	;;
282	st8.spill [r14]=r6,SW(B0)-SW(R6)	// spill r6
283	mov.m r18=ar.fpsr		// preserve fpsr
284	add r3=SW(F3)+16,sp		// r3 = &sw->f3
285	;;
286	stf.spill [r2]=f2,32
287	mov.m r19=ar.rnat
288	mov r21=b0
289
290	stf.spill [r3]=f3,32
291	st8.spill [r15]=r7,SW(B2)-SW(R7)	// spill r7
292	mov r22=b1
293	;;
294	// since we're done with the spills, read and save ar.unat:
295	mov.m r29=ar.unat
296	mov.m r20=ar.bspstore
297	mov r23=b2
298	stf.spill [r2]=f4,32
299	stf.spill [r3]=f5,32
300	mov r24=b3
301	;;
302	st8 [r14]=r21,SW(B1)-SW(B0)		// save b0
303	st8 [r15]=r23,SW(B3)-SW(B2)		// save b2
304	mov r25=b4
305	mov r26=b5
306	;;
307	st8 [r14]=r22,SW(B4)-SW(B1)		// save b1
308	st8 [r15]=r24,SW(AR_PFS)-SW(B3)		// save b3
309	mov r21=ar.lc		// I-unit
310	stf.spill [r2]=f12,32
311	stf.spill [r3]=f13,32
312	;;
313	st8 [r14]=r25,SW(B5)-SW(B4)		// save b4
314	st8 [r15]=r16,SW(AR_LC)-SW(AR_PFS)	// save ar.pfs
315	stf.spill [r2]=f14,32
316	stf.spill [r3]=f15,32
317	;;
318	st8 [r14]=r26				// save b5
319	st8 [r15]=r21				// save ar.lc
320	stf.spill [r2]=f16,32
321	stf.spill [r3]=f17,32
322	;;
323	stf.spill [r2]=f18,32
324	stf.spill [r3]=f19,32
325	;;
326	stf.spill [r2]=f20,32
327	stf.spill [r3]=f21,32
328	;;
329	stf.spill [r2]=f22,32
330	stf.spill [r3]=f23,32
331	;;
332	stf.spill [r2]=f24,32
333	stf.spill [r3]=f25,32
334	;;
335	stf.spill [r2]=f26,32
336	stf.spill [r3]=f27,32
337	;;
338	stf.spill [r2]=f28,32
339	stf.spill [r3]=f29,32
340	;;
341	stf.spill [r2]=f30,SW(AR_UNAT)-SW(F30)
342	stf.spill [r3]=f31,SW(PR)-SW(F31)
343	add r14=SW(CALLER_UNAT)+16,sp
344	;;
345	st8 [r2]=r29,SW(AR_RNAT)-SW(AR_UNAT)	// save ar.unat
346	st8 [r14]=r17,SW(AR_FPSR)-SW(CALLER_UNAT) // save caller_unat
347	mov r21=pr
348	;;
349	st8 [r2]=r19,SW(AR_BSPSTORE)-SW(AR_RNAT) // save ar.rnat
350	st8 [r3]=r21				// save predicate registers
351	;;
352	st8 [r2]=r20				// save ar.bspstore
353	st8 [r14]=r18				// save fpsr
354	mov ar.rsc=3		// put RSE back into eager mode, pl 0
355	br.cond.sptk.many b7
356END(save_switch_stack)
357
358/*
359 * load_switch_stack:
360 *	- "invala" MUST be done at call site (normally in DO_LOAD_SWITCH_STACK)
361 *	- b7 holds address to return to
362 *	- must not touch r8-r11
363 */
364GLOBAL_ENTRY(load_switch_stack)
365	.prologue
366	.altrp b7
367
368	.body
369	lfetch.fault.nt1 [sp]
370	adds r2=SW(AR_BSPSTORE)+16,sp
371	adds r3=SW(AR_UNAT)+16,sp
372	mov ar.rsc=0						// put RSE into enforced lazy mode
373	adds r14=SW(CALLER_UNAT)+16,sp
374	adds r15=SW(AR_FPSR)+16,sp
375	;;
376	ld8 r27=[r2],(SW(B0)-SW(AR_BSPSTORE))	// bspstore
377	ld8 r29=[r3],(SW(B1)-SW(AR_UNAT))	// unat
378	;;
379	ld8 r21=[r2],16		// restore b0
380	ld8 r22=[r3],16		// restore b1
381	;;
382	ld8 r23=[r2],16		// restore b2
383	ld8 r24=[r3],16		// restore b3
384	;;
385	ld8 r25=[r2],16		// restore b4
386	ld8 r26=[r3],16		// restore b5
387	;;
388	ld8 r16=[r2],(SW(PR)-SW(AR_PFS))	// ar.pfs
389	ld8 r17=[r3],(SW(AR_RNAT)-SW(AR_LC))	// ar.lc
390	;;
391	ld8 r28=[r2]		// restore pr
392	ld8 r30=[r3]		// restore rnat
393	;;
394	ld8 r18=[r14],16	// restore caller's unat
395	ld8 r19=[r15],24	// restore fpsr
396	;;
397	ldf.fill f2=[r14],32
398	ldf.fill f3=[r15],32
399	;;
400	ldf.fill f4=[r14],32
401	ldf.fill f5=[r15],32
402	;;
403	ldf.fill f12=[r14],32
404	ldf.fill f13=[r15],32
405	;;
406	ldf.fill f14=[r14],32
407	ldf.fill f15=[r15],32
408	;;
409	ldf.fill f16=[r14],32
410	ldf.fill f17=[r15],32
411	;;
412	ldf.fill f18=[r14],32
413	ldf.fill f19=[r15],32
414	mov b0=r21
415	;;
416	ldf.fill f20=[r14],32
417	ldf.fill f21=[r15],32
418	mov b1=r22
419	;;
420	ldf.fill f22=[r14],32
421	ldf.fill f23=[r15],32
422	mov b2=r23
423	;;
424	mov ar.bspstore=r27
425	mov ar.unat=r29		// establish unat holding the NaT bits for r4-r7
426	mov b3=r24
427	;;
428	ldf.fill f24=[r14],32
429	ldf.fill f25=[r15],32
430	mov b4=r25
431	;;
432	ldf.fill f26=[r14],32
433	ldf.fill f27=[r15],32
434	mov b5=r26
435	;;
436	ldf.fill f28=[r14],32
437	ldf.fill f29=[r15],32
438	mov ar.pfs=r16
439	;;
440	ldf.fill f30=[r14],32
441	ldf.fill f31=[r15],24
442	mov ar.lc=r17
443	;;
444	ld8.fill r4=[r14],16
445	ld8.fill r5=[r15],16
446	mov pr=r28,-1
447	;;
448	ld8.fill r6=[r14],16
449	ld8.fill r7=[r15],16
450
451	mov ar.unat=r18				// restore caller's unat
452	mov ar.rnat=r30				// must restore after bspstore but before rsc!
453	mov ar.fpsr=r19				// restore fpsr
454	mov ar.rsc=3				// put RSE back into eager mode, pl 0
455	br.cond.sptk.many b7
456END(load_switch_stack)
457
458GLOBAL_ENTRY(prefetch_stack)
459	add r14 = -IA64_SWITCH_STACK_SIZE, sp
460	add r15 = IA64_TASK_THREAD_KSP_OFFSET, in0
461	;;
462	ld8 r16 = [r15]				// load next's stack pointer
463	lfetch.fault.excl [r14], 128
464	;;
465	lfetch.fault.excl [r14], 128
466	lfetch.fault [r16], 128
467	;;
468	lfetch.fault.excl [r14], 128
469	lfetch.fault [r16], 128
470	;;
471	lfetch.fault.excl [r14], 128
472	lfetch.fault [r16], 128
473	;;
474	lfetch.fault.excl [r14], 128
475	lfetch.fault [r16], 128
476	;;
477	lfetch.fault [r16], 128
478	br.ret.sptk.many rp
479END(prefetch_stack)
480
481	/*
482	 * Invoke a system call, but do some tracing before and after the call.
483	 * We MUST preserve the current register frame throughout this routine
484	 * because some system calls (such as ia64_execve) directly
485	 * manipulate ar.pfs.
486	 */
487GLOBAL_ENTRY(ia64_trace_syscall)
488	PT_REGS_UNWIND_INFO(0)
489	/*
490	 * We need to preserve the scratch registers f6-f11 in case the system
491	 * call is sigreturn.
492	 */
493	adds r16=PT(F6)+16,sp
494	adds r17=PT(F7)+16,sp
495	;;
496 	stf.spill [r16]=f6,32
497 	stf.spill [r17]=f7,32
498	;;
499 	stf.spill [r16]=f8,32
500 	stf.spill [r17]=f9,32
501	;;
502 	stf.spill [r16]=f10
503 	stf.spill [r17]=f11
504	br.call.sptk.many rp=syscall_trace_enter // give parent a chance to catch syscall args
505	cmp.lt p6,p0=r8,r0			// check tracehook
506	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
507	adds r3=PT(R10)+16,sp			// r3 = &pt_regs.r10
508	mov r10=0
509(p6)	br.cond.sptk strace_error		// syscall failed ->
510	adds r16=PT(F6)+16,sp
511	adds r17=PT(F7)+16,sp
512	;;
513	ldf.fill f6=[r16],32
514	ldf.fill f7=[r17],32
515	;;
516	ldf.fill f8=[r16],32
517	ldf.fill f9=[r17],32
518	;;
519	ldf.fill f10=[r16]
520	ldf.fill f11=[r17]
521	// the syscall number may have changed, so re-load it and re-calculate the
522	// syscall entry-point:
523	adds r15=PT(R15)+16,sp			// r15 = &pt_regs.r15 (syscall #)
524	;;
525	ld8 r15=[r15]
526	mov r3=NR_syscalls - 1
527	;;
528	adds r15=-1024,r15
529	movl r16=sys_call_table
530	;;
531	shladd r20=r15,3,r16			// r20 = sys_call_table + 8*(syscall-1024)
532	cmp.leu p6,p7=r15,r3
533	;;
534(p6)	ld8 r20=[r20]				// load address of syscall entry point
535(p7)	movl r20=sys_ni_syscall
536	;;
537	mov b6=r20
538	br.call.sptk.many rp=b6			// do the syscall
539.strace_check_retval:
540	cmp.lt p6,p0=r8,r0			// syscall failed?
541	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
542	adds r3=PT(R10)+16,sp			// r3 = &pt_regs.r10
543	mov r10=0
544(p6)	br.cond.sptk strace_error		// syscall failed ->
545	;;					// avoid RAW on r10
546.strace_save_retval:
547.mem.offset 0,0; st8.spill [r2]=r8		// store return value in slot for r8
548.mem.offset 8,0; st8.spill [r3]=r10		// clear error indication in slot for r10
549	br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value
550.ret3:
551(pUStk)	cmp.eq.unc p6,p0=r0,r0			// p6 <- pUStk
552(pUStk)	rsm psr.i				// disable interrupts
553	br.cond.sptk ia64_work_pending_syscall_end
554
555strace_error:
556	ld8 r3=[r2]				// load pt_regs.r8
557	sub r9=0,r8				// negate return value to get errno value
558	;;
559	cmp.ne p6,p0=r3,r0			// is pt_regs.r8!=0?
560	adds r3=16,r2				// r3=&pt_regs.r10
561	;;
562(p6)	mov r10=-1
563(p6)	mov r8=r9
564	br.cond.sptk .strace_save_retval
565END(ia64_trace_syscall)
566
567	/*
568	 * When traced and returning from sigreturn, we invoke syscall_trace but then
569	 * go straight to ia64_leave_kernel rather than ia64_leave_syscall.
570	 */
571GLOBAL_ENTRY(ia64_strace_leave_kernel)
572	PT_REGS_UNWIND_INFO(0)
573{	/*
574	 * Some versions of gas generate bad unwind info if the first instruction of a
575	 * procedure doesn't go into the first slot of a bundle.  This is a workaround.
576	 */
577	nop.m 0
578	nop.i 0
579	br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value
580}
581.ret4:	br.cond.sptk ia64_leave_kernel
582END(ia64_strace_leave_kernel)
583
584ENTRY(call_payload)
585	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(0)
586	/* call the kernel_thread payload; fn is in r4, arg - in r5 */
587	alloc loc1=ar.pfs,0,3,1,0
588	mov loc0=rp
589	mov loc2=gp
590	mov out0=r5		// arg
591	ld8 r14 = [r4], 8	// fn.address
592	;;
593	mov b6 = r14
594	ld8 gp = [r4]		// fn.gp
595	;;
596	br.call.sptk.many rp=b6	// fn(arg)
597.ret12:	mov gp=loc2
598	mov rp=loc0
599	mov ar.pfs=loc1
600	/* ... and if it has returned, we are going to userland */
601	cmp.ne pKStk,pUStk=r0,r0
602	br.ret.sptk.many rp
603END(call_payload)
604
605GLOBAL_ENTRY(ia64_ret_from_clone)
606	PT_REGS_UNWIND_INFO(0)
607{	/*
608	 * Some versions of gas generate bad unwind info if the first instruction of a
609	 * procedure doesn't go into the first slot of a bundle.  This is a workaround.
610	 */
611	nop.m 0
612	nop.i 0
613	/*
614	 * We need to call schedule_tail() to complete the scheduling process.
615	 * Called by ia64_switch_to() after do_fork()->copy_thread().  r8 contains the
616	 * address of the previously executing task.
617	 */
618	br.call.sptk.many rp=ia64_invoke_schedule_tail
619}
620.ret8:
621(pKStk)	br.call.sptk.many rp=call_payload
622	adds r2=TI_FLAGS+IA64_TASK_SIZE,r13
623	;;
624	ld4 r2=[r2]
625	;;
626	mov r8=0
627	and r2=_TIF_SYSCALL_TRACEAUDIT,r2
628	;;
629	cmp.ne p6,p0=r2,r0
630(p6)	br.cond.spnt .strace_check_retval
631	;;					// added stop bits to prevent r8 dependency
632END(ia64_ret_from_clone)
633	// fall through
634GLOBAL_ENTRY(ia64_ret_from_syscall)
635	PT_REGS_UNWIND_INFO(0)
636	cmp.ge p6,p7=r8,r0			// syscall executed successfully?
637	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
638	mov r10=r0				// clear error indication in r10
639(p7)	br.cond.spnt handle_syscall_error	// handle potential syscall failure
640END(ia64_ret_from_syscall)
641	// fall through
642
643/*
644 * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
645 *	need to switch to bank 0 and doesn't restore the scratch registers.
646 *	To avoid leaking kernel bits, the scratch registers are set to
647 *	the following known-to-be-safe values:
648 *
649 *		  r1: restored (global pointer)
650 *		  r2: cleared
651 *		  r3: 1 (when returning to user-level)
652 *	      r8-r11: restored (syscall return value(s))
653 *		 r12: restored (user-level stack pointer)
654 *		 r13: restored (user-level thread pointer)
655 *		 r14: set to __kernel_syscall_via_epc
656 *		 r15: restored (syscall #)
657 *	     r16-r17: cleared
658 *		 r18: user-level b6
659 *		 r19: cleared
660 *		 r20: user-level ar.fpsr
661 *		 r21: user-level b0
662 *		 r22: cleared
663 *		 r23: user-level ar.bspstore
664 *		 r24: user-level ar.rnat
665 *		 r25: user-level ar.unat
666 *		 r26: user-level ar.pfs
667 *		 r27: user-level ar.rsc
668 *		 r28: user-level ip
669 *		 r29: user-level psr
670 *		 r30: user-level cfm
671 *		 r31: user-level pr
672 *	      f6-f11: cleared
673 *		  pr: restored (user-level pr)
674 *		  b0: restored (user-level rp)
675 *	          b6: restored
676 *		  b7: set to __kernel_syscall_via_epc
677 *	     ar.unat: restored (user-level ar.unat)
678 *	      ar.pfs: restored (user-level ar.pfs)
679 *	      ar.rsc: restored (user-level ar.rsc)
680 *	     ar.rnat: restored (user-level ar.rnat)
681 *	 ar.bspstore: restored (user-level ar.bspstore)
682 *	     ar.fpsr: restored (user-level ar.fpsr)
683 *	      ar.ccv: cleared
684 *	      ar.csd: cleared
685 *	      ar.ssd: cleared
686 */
687GLOBAL_ENTRY(ia64_leave_syscall)
688	PT_REGS_UNWIND_INFO(0)
689	/*
690	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
691	 * user- or fsys-mode, hence we disable interrupts early on.
692	 *
693	 * p6 controls whether current_thread_info()->flags needs to be check for
694	 * extra work.  We always check for extra work when returning to user-level.
695	 * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
696	 * is 0.  After extra work processing has been completed, execution
697	 * resumes at ia64_work_processed_syscall with p6 set to 1 if the extra-work-check
698	 * needs to be redone.
699	 */
700#ifdef CONFIG_PREEMPT
701	RSM_PSR_I(p0, r2, r18)			// disable interrupts
702	cmp.eq pLvSys,p0=r0,r0			// pLvSys=1: leave from syscall
703(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
704	;;
705	.pred.rel.mutex pUStk,pKStk
706(pKStk) ld4 r21=[r20]			// r21 <- preempt_count
707(pUStk)	mov r21=0			// r21 <- 0
708	;;
709	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
710#else /* !CONFIG_PREEMPT */
711	RSM_PSR_I(pUStk, r2, r18)
712	cmp.eq pLvSys,p0=r0,r0		// pLvSys=1: leave from syscall
713(pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
714#endif
715.global ia64_work_processed_syscall;
716ia64_work_processed_syscall:
717#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
718	adds r2=PT(LOADRS)+16,r12
719	MOV_FROM_ITC(pUStk, p9, r22, r19)	// fetch time at leave
720	adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
721	;;
722(p6)	ld4 r31=[r18]				// load current_thread_info()->flags
723	ld8 r19=[r2],PT(B6)-PT(LOADRS)		// load ar.rsc value for "loadrs"
724	adds r3=PT(AR_BSPSTORE)+16,r12		// deferred
725	;;
726#else
727	adds r2=PT(LOADRS)+16,r12
728	adds r3=PT(AR_BSPSTORE)+16,r12
729	adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
730	;;
731(p6)	ld4 r31=[r18]				// load current_thread_info()->flags
732	ld8 r19=[r2],PT(B6)-PT(LOADRS)		// load ar.rsc value for "loadrs"
733	nop.i 0
734	;;
735#endif
736	mov r16=ar.bsp				// M2  get existing backing store pointer
737	ld8 r18=[r2],PT(R9)-PT(B6)		// load b6
738(p6)	and r15=TIF_WORK_MASK,r31		// any work other than TIF_SYSCALL_TRACE?
739	;;
740	ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)	// load ar.bspstore (may be garbage)
741(p6)	cmp4.ne.unc p6,p0=r15, r0		// any special work pending?
742(p6)	br.cond.spnt .work_pending_syscall
743	;;
744	// start restoring the state saved on the kernel stack (struct pt_regs):
745	ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
746	ld8 r11=[r3],PT(CR_IIP)-PT(R11)
747(pNonSys) break 0		//      bug check: we shouldn't be here if pNonSys is TRUE!
748	;;
749	invala			// M0|1 invalidate ALAT
750	RSM_PSR_I_IC(r28, r29, r30)	// M2   turn off interrupts and interruption collection
751	cmp.eq p9,p0=r0,r0	// A    set p9 to indicate that we should restore cr.ifs
752
753	ld8 r29=[r2],16		// M0|1 load cr.ipsr
754	ld8 r28=[r3],16		// M0|1 load cr.iip
755#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
756(pUStk) add r14=TI_AC_LEAVE+IA64_TASK_SIZE,r13
757	;;
758	ld8 r30=[r2],16		// M0|1 load cr.ifs
759	ld8 r25=[r3],16		// M0|1 load ar.unat
760(pUStk) add r15=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
761	;;
762#else
763	mov r22=r0		// A    clear r22
764	;;
765	ld8 r30=[r2],16		// M0|1 load cr.ifs
766	ld8 r25=[r3],16		// M0|1 load ar.unat
767(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
768	;;
769#endif
770	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
771	MOV_FROM_PSR(pKStk, r22, r21)	// M2   read PSR now that interrupts are disabled
772	nop 0
773	;;
774	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
775	ld8 r27=[r3],PT(PR)-PT(AR_RSC)	// M0|1 load ar.rsc
776	mov f6=f0			// F    clear f6
777	;;
778	ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT)	// M0|1 load ar.rnat (may be garbage)
779	ld8 r31=[r3],PT(R1)-PT(PR)		// M0|1 load predicates
780	mov f7=f0				// F    clear f7
781	;;
782	ld8 r20=[r2],PT(R12)-PT(AR_FPSR)	// M0|1 load ar.fpsr
783	ld8.fill r1=[r3],16			// M0|1 load r1
784(pUStk) mov r17=1				// A
785	;;
786#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
787(pUStk) st1 [r15]=r17				// M2|3
788#else
789(pUStk) st1 [r14]=r17				// M2|3
790#endif
791	ld8.fill r13=[r3],16			// M0|1
792	mov f8=f0				// F    clear f8
793	;;
794	ld8.fill r12=[r2]			// M0|1 restore r12 (sp)
795	ld8.fill r15=[r3]			// M0|1 restore r15
796	mov b6=r18				// I0   restore b6
797
798	LOAD_PHYS_STACK_REG_SIZE(r17)
799	mov f9=f0					// F    clear f9
800(pKStk) br.cond.dpnt.many skip_rbs_switch		// B
801
802	srlz.d				// M0   ensure interruption collection is off (for cover)
803	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
804	COVER				// B    add current frame into dirty partition & set cr.ifs
805	;;
806#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
807	mov r19=ar.bsp			// M2   get new backing store pointer
808	st8 [r14]=r22			// M	save time at leave
809	mov f10=f0			// F    clear f10
810
811	mov r22=r0			// A	clear r22
812	movl r14=__kernel_syscall_via_epc // X
813	;;
814#else
815	mov r19=ar.bsp			// M2   get new backing store pointer
816	mov f10=f0			// F    clear f10
817
818	nop.m 0
819	movl r14=__kernel_syscall_via_epc // X
820	;;
821#endif
822	mov.m ar.csd=r0			// M2   clear ar.csd
823	mov.m ar.ccv=r0			// M2   clear ar.ccv
824	mov b7=r14			// I0   clear b7 (hint with __kernel_syscall_via_epc)
825
826	mov.m ar.ssd=r0			// M2   clear ar.ssd
827	mov f11=f0			// F    clear f11
828	br.cond.sptk.many rbs_switch	// B
829END(ia64_leave_syscall)
830
831GLOBAL_ENTRY(ia64_leave_kernel)
832	PT_REGS_UNWIND_INFO(0)
833	/*
834	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
835	 * user- or fsys-mode, hence we disable interrupts early on.
836	 *
837	 * p6 controls whether current_thread_info()->flags needs to be check for
838	 * extra work.  We always check for extra work when returning to user-level.
839	 * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
840	 * is 0.  After extra work processing has been completed, execution
841	 * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
842	 * needs to be redone.
843	 */
844#ifdef CONFIG_PREEMPT
845	RSM_PSR_I(p0, r17, r31)			// disable interrupts
846	cmp.eq p0,pLvSys=r0,r0			// pLvSys=0: leave from kernel
847(pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
848	;;
849	.pred.rel.mutex pUStk,pKStk
850(pKStk)	ld4 r21=[r20]			// r21 <- preempt_count
851(pUStk)	mov r21=0			// r21 <- 0
852	;;
853	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
854#else
855	RSM_PSR_I(pUStk, r17, r31)
856	cmp.eq p0,pLvSys=r0,r0		// pLvSys=0: leave from kernel
857(pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
858#endif
859.work_processed_kernel:
860	adds r17=TI_FLAGS+IA64_TASK_SIZE,r13
861	;;
862(p6)	ld4 r31=[r17]				// load current_thread_info()->flags
863	adds r21=PT(PR)+16,r12
864	;;
865
866	lfetch [r21],PT(CR_IPSR)-PT(PR)
867	adds r2=PT(B6)+16,r12
868	adds r3=PT(R16)+16,r12
869	;;
870	lfetch [r21]
871	ld8 r28=[r2],8		// load b6
872	adds r29=PT(R24)+16,r12
873
874	ld8.fill r16=[r3],PT(AR_CSD)-PT(R16)
875	adds r30=PT(AR_CCV)+16,r12
876(p6)	and r19=TIF_WORK_MASK,r31		// any work other than TIF_SYSCALL_TRACE?
877	;;
878	ld8.fill r24=[r29]
879	ld8 r15=[r30]		// load ar.ccv
880(p6)	cmp4.ne.unc p6,p0=r19, r0		// any special work pending?
881	;;
882	ld8 r29=[r2],16		// load b7
883	ld8 r30=[r3],16		// load ar.csd
884(p6)	br.cond.spnt .work_pending
885	;;
886	ld8 r31=[r2],16		// load ar.ssd
887	ld8.fill r8=[r3],16
888	;;
889	ld8.fill r9=[r2],16
890	ld8.fill r10=[r3],PT(R17)-PT(R10)
891	;;
892	ld8.fill r11=[r2],PT(R18)-PT(R11)
893	ld8.fill r17=[r3],16
894	;;
895	ld8.fill r18=[r2],16
896	ld8.fill r19=[r3],16
897	;;
898	ld8.fill r20=[r2],16
899	ld8.fill r21=[r3],16
900	mov ar.csd=r30
901	mov ar.ssd=r31
902	;;
903	RSM_PSR_I_IC(r23, r22, r25)	// initiate turning off of interrupt and interruption collection
904	invala			// invalidate ALAT
905	;;
906	ld8.fill r22=[r2],24
907	ld8.fill r23=[r3],24
908	mov b6=r28
909	;;
910	ld8.fill r25=[r2],16
911	ld8.fill r26=[r3],16
912	mov b7=r29
913	;;
914	ld8.fill r27=[r2],16
915	ld8.fill r28=[r3],16
916	;;
917	ld8.fill r29=[r2],16
918	ld8.fill r30=[r3],24
919	;;
920	ld8.fill r31=[r2],PT(F9)-PT(R31)
921	adds r3=PT(F10)-PT(F6),r3
922	;;
923	ldf.fill f9=[r2],PT(F6)-PT(F9)
924	ldf.fill f10=[r3],PT(F8)-PT(F10)
925	;;
926	ldf.fill f6=[r2],PT(F7)-PT(F6)
927	;;
928	ldf.fill f7=[r2],PT(F11)-PT(F7)
929	ldf.fill f8=[r3],32
930	;;
931	srlz.d	// ensure that inter. collection is off (VHPT is don't care, since text is pinned)
932	mov ar.ccv=r15
933	;;
934	ldf.fill f11=[r2]
935	BSW_0(r2, r3, r15)	// switch back to bank 0 (no stop bit required beforehand...)
936	;;
937(pUStk)	mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
938	adds r16=PT(CR_IPSR)+16,r12
939	adds r17=PT(CR_IIP)+16,r12
940
941#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
942	.pred.rel.mutex pUStk,pKStk
943	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
944	MOV_FROM_ITC(pUStk, p9, r22, r29)	// M  fetch time at leave
945	nop.i 0
946	;;
947#else
948	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
949	nop.i 0
950	nop.i 0
951	;;
952#endif
953	ld8 r29=[r16],16	// load cr.ipsr
954	ld8 r28=[r17],16	// load cr.iip
955	;;
956	ld8 r30=[r16],16	// load cr.ifs
957	ld8 r25=[r17],16	// load ar.unat
958	;;
959	ld8 r26=[r16],16	// load ar.pfs
960	ld8 r27=[r17],16	// load ar.rsc
961	cmp.eq p9,p0=r0,r0	// set p9 to indicate that we should restore cr.ifs
962	;;
963	ld8 r24=[r16],16	// load ar.rnat (may be garbage)
964	ld8 r23=[r17],16	// load ar.bspstore (may be garbage)
965	;;
966	ld8 r31=[r16],16	// load predicates
967	ld8 r21=[r17],16	// load b0
968	;;
969	ld8 r19=[r16],16	// load ar.rsc value for "loadrs"
970	ld8.fill r1=[r17],16	// load r1
971	;;
972	ld8.fill r12=[r16],16
973	ld8.fill r13=[r17],16
974#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
975(pUStk)	adds r3=TI_AC_LEAVE+IA64_TASK_SIZE,r18
976#else
977(pUStk)	adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
978#endif
979	;;
980	ld8 r20=[r16],16	// ar.fpsr
981	ld8.fill r15=[r17],16
982#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
983(pUStk)	adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18	// deferred
984#endif
985	;;
986	ld8.fill r14=[r16],16
987	ld8.fill r2=[r17]
988(pUStk)	mov r17=1
989	;;
990#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
991	//  mmi_ :  ld8 st1 shr;;         mmi_ : st8 st1 shr;;
992	//  mib  :  mov add br        ->  mib  : ld8 add br
993	//  bbb_ :  br  nop cover;;       mbb_ : mov br  cover;;
994	//
995	//  no one require bsp in r16 if (pKStk) branch is selected.
996(pUStk)	st8 [r3]=r22		// save time at leave
997(pUStk)	st1 [r18]=r17		// restore current->thread.on_ustack
998	shr.u r18=r19,16	// get byte size of existing "dirty" partition
999	;;
1000	ld8.fill r3=[r16]	// deferred
1001	LOAD_PHYS_STACK_REG_SIZE(r17)
1002(pKStk)	br.cond.dpnt skip_rbs_switch
1003	mov r16=ar.bsp		// get existing backing store pointer
1004#else
1005	ld8.fill r3=[r16]
1006(pUStk)	st1 [r18]=r17		// restore current->thread.on_ustack
1007	shr.u r18=r19,16	// get byte size of existing "dirty" partition
1008	;;
1009	mov r16=ar.bsp		// get existing backing store pointer
1010	LOAD_PHYS_STACK_REG_SIZE(r17)
1011(pKStk)	br.cond.dpnt skip_rbs_switch
1012#endif
1013
1014	/*
1015	 * Restore user backing store.
1016	 *
1017	 * NOTE: alloc, loadrs, and cover can't be predicated.
1018	 */
1019(pNonSys) br.cond.dpnt dont_preserve_current_frame
1020	COVER				// add current frame into dirty partition and set cr.ifs
1021	;;
1022	mov r19=ar.bsp			// get new backing store pointer
1023rbs_switch:
1024	sub r16=r16,r18			// krbs = old bsp - size of dirty partition
1025	cmp.ne p9,p0=r0,r0		// clear p9 to skip restore of cr.ifs
1026	;;
1027	sub r19=r19,r16			// calculate total byte size of dirty partition
1028	add r18=64,r18			// don't force in0-in7 into memory...
1029	;;
1030	shl r19=r19,16			// shift size of dirty partition into loadrs position
1031	;;
1032dont_preserve_current_frame:
1033	/*
1034	 * To prevent leaking bits between the kernel and user-space,
1035	 * we must clear the stacked registers in the "invalid" partition here.
1036	 * Not pretty, but at least it's fast (3.34 registers/cycle on Itanium,
1037	 * 5 registers/cycle on McKinley).
1038	 */
1039#	define pRecurse	p6
1040#	define pReturn	p7
1041#ifdef CONFIG_ITANIUM
1042#	define Nregs	10
1043#else
1044#	define Nregs	14
1045#endif
1046	alloc loc0=ar.pfs,2,Nregs-2,2,0
1047	shr.u loc1=r18,9		// RNaTslots <= floor(dirtySize / (64*8))
1048	sub r17=r17,r18			// r17 = (physStackedSize + 8) - dirtySize
1049	;;
1050	mov ar.rsc=r19			// load ar.rsc to be used for "loadrs"
1051	shladd in0=loc1,3,r17
1052	mov in1=0
1053	;;
1054	TEXT_ALIGN(32)
1055rse_clear_invalid:
1056#ifdef CONFIG_ITANIUM
1057	// cycle 0
1058 { .mii
1059	alloc loc0=ar.pfs,2,Nregs-2,2,0
1060	cmp.lt pRecurse,p0=Nregs*8,in0	// if more than Nregs regs left to clear, (re)curse
1061	add out0=-Nregs*8,in0
1062}{ .mfb
1063	add out1=1,in1			// increment recursion count
1064	nop.f 0
1065	nop.b 0				// can't do br.call here because of alloc (WAW on CFM)
1066	;;
1067}{ .mfi	// cycle 1
1068	mov loc1=0
1069	nop.f 0
1070	mov loc2=0
1071}{ .mib
1072	mov loc3=0
1073	mov loc4=0
1074(pRecurse) br.call.sptk.many b0=rse_clear_invalid
1075
1076}{ .mfi	// cycle 2
1077	mov loc5=0
1078	nop.f 0
1079	cmp.ne pReturn,p0=r0,in1	// if recursion count != 0, we need to do a br.ret
1080}{ .mib
1081	mov loc6=0
1082	mov loc7=0
1083(pReturn) br.ret.sptk.many b0
1084}
1085#else /* !CONFIG_ITANIUM */
1086	alloc loc0=ar.pfs,2,Nregs-2,2,0
1087	cmp.lt pRecurse,p0=Nregs*8,in0	// if more than Nregs regs left to clear, (re)curse
1088	add out0=-Nregs*8,in0
1089	add out1=1,in1			// increment recursion count
1090	mov loc1=0
1091	mov loc2=0
1092	;;
1093	mov loc3=0
1094	mov loc4=0
1095	mov loc5=0
1096	mov loc6=0
1097	mov loc7=0
1098(pRecurse) br.call.dptk.few b0=rse_clear_invalid
1099	;;
1100	mov loc8=0
1101	mov loc9=0
1102	cmp.ne pReturn,p0=r0,in1	// if recursion count != 0, we need to do a br.ret
1103	mov loc10=0
1104	mov loc11=0
1105(pReturn) br.ret.dptk.many b0
1106#endif /* !CONFIG_ITANIUM */
1107#	undef pRecurse
1108#	undef pReturn
1109	;;
1110	alloc r17=ar.pfs,0,0,0,0	// drop current register frame
1111	;;
1112	loadrs
1113	;;
1114skip_rbs_switch:
1115	mov ar.unat=r25		// M2
1116(pKStk)	extr.u r22=r22,21,1	// I0 extract current value of psr.pp from r22
1117(pLvSys)mov r19=r0		// A  clear r19 for leave_syscall, no-op otherwise
1118	;;
1119(pUStk)	mov ar.bspstore=r23	// M2
1120(pKStk)	dep r29=r22,r29,21,1	// I0 update ipsr.pp with psr.pp
1121(pLvSys)mov r16=r0		// A  clear r16 for leave_syscall, no-op otherwise
1122	;;
1123	MOV_TO_IPSR(p0, r29, r25)	// M2
1124	mov ar.pfs=r26		// I0
1125(pLvSys)mov r17=r0		// A  clear r17 for leave_syscall, no-op otherwise
1126
1127	MOV_TO_IFS(p9, r30, r25)// M2
1128	mov b0=r21		// I0
1129(pLvSys)mov r18=r0		// A  clear r18 for leave_syscall, no-op otherwise
1130
1131	mov ar.fpsr=r20		// M2
1132	MOV_TO_IIP(r28, r25)	// M2
1133	nop 0
1134	;;
1135(pUStk)	mov ar.rnat=r24		// M2 must happen with RSE in lazy mode
1136	nop 0
1137(pLvSys)mov r2=r0
1138
1139	mov ar.rsc=r27		// M2
1140	mov pr=r31,-1		// I0
1141	RFI			// B
1142
1143	/*
1144	 * On entry:
1145	 *	r20 = &current->thread_info->pre_count (if CONFIG_PREEMPT)
1146	 *	r31 = current->thread_info->flags
1147	 * On exit:
1148	 *	p6 = TRUE if work-pending-check needs to be redone
1149	 *
1150	 * Interrupts are disabled on entry, reenabled depend on work, and
1151	 * disabled on exit.
1152	 */
1153.work_pending_syscall:
1154	add r2=-8,r2
1155	add r3=-8,r3
1156	;;
1157	st8 [r2]=r8
1158	st8 [r3]=r10
1159.work_pending:
1160	tbit.z p6,p0=r31,TIF_NEED_RESCHED	// is resched not needed?
1161(p6)	br.cond.sptk.few .notify
1162	br.call.spnt.many rp=preempt_schedule_irq
1163.ret9:	cmp.eq p6,p0=r0,r0	// p6 <- 1 (re-check)
1164(pLvSys)br.cond.sptk.few  ia64_work_pending_syscall_end
1165	br.cond.sptk.many .work_processed_kernel
1166
1167.notify:
1168(pUStk)	br.call.spnt.many rp=notify_resume_user
1169.ret10:	cmp.ne p6,p0=r0,r0	// p6 <- 0 (don't re-check)
1170(pLvSys)br.cond.sptk.few  ia64_work_pending_syscall_end
1171	br.cond.sptk.many .work_processed_kernel
1172
1173.global ia64_work_pending_syscall_end;
1174ia64_work_pending_syscall_end:
1175	adds r2=PT(R8)+16,r12
1176	adds r3=PT(R10)+16,r12
1177	;;
1178	ld8 r8=[r2]
1179	ld8 r10=[r3]
1180	br.cond.sptk.many ia64_work_processed_syscall
1181END(ia64_leave_kernel)
1182
1183ENTRY(handle_syscall_error)
1184	/*
1185	 * Some system calls (e.g., ptrace, mmap) can return arbitrary values which could
1186	 * lead us to mistake a negative return value as a failed syscall.  Those syscall
1187	 * must deposit a non-zero value in pt_regs.r8 to indicate an error.  If
1188	 * pt_regs.r8 is zero, we assume that the call completed successfully.
1189	 */
1190	PT_REGS_UNWIND_INFO(0)
1191	ld8 r3=[r2]		// load pt_regs.r8
1192	;;
1193	cmp.eq p6,p7=r3,r0	// is pt_regs.r8==0?
1194	;;
1195(p7)	mov r10=-1
1196(p7)	sub r8=0,r8		// negate return value to get errno
1197	br.cond.sptk ia64_leave_syscall
1198END(handle_syscall_error)
1199
1200	/*
1201	 * Invoke schedule_tail(task) while preserving in0-in7, which may be needed
1202	 * in case a system call gets restarted.
1203	 */
1204GLOBAL_ENTRY(ia64_invoke_schedule_tail)
1205	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
1206	alloc loc1=ar.pfs,8,2,1,0
1207	mov loc0=rp
1208	mov out0=r8				// Address of previous task
1209	;;
1210	br.call.sptk.many rp=schedule_tail
1211.ret11:	mov ar.pfs=loc1
1212	mov rp=loc0
1213	br.ret.sptk.many rp
1214END(ia64_invoke_schedule_tail)
1215
1216	/*
1217	 * Setup stack and call do_notify_resume_user(), keeping interrupts
1218	 * disabled.
1219	 *
1220	 * Note that pSys and pNonSys need to be set up by the caller.
1221	 * We declare 8 input registers so the system call args get preserved,
1222	 * in case we need to restart a system call.
1223	 */
1224GLOBAL_ENTRY(notify_resume_user)
1225	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
1226	alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart!
1227	mov r9=ar.unat
1228	mov loc0=rp				// save return address
1229	mov out0=0				// there is no "oldset"
1230	adds out1=8,sp				// out1=&sigscratch->ar_pfs
1231(pSys)	mov out2=1				// out2==1 => we're in a syscall
1232	;;
1233(pNonSys) mov out2=0				// out2==0 => not a syscall
1234	.fframe 16
1235	.spillsp ar.unat, 16
1236	st8 [sp]=r9,-16				// allocate space for ar.unat and save it
1237	st8 [out1]=loc1,-8			// save ar.pfs, out1=&sigscratch
1238	.body
1239	br.call.sptk.many rp=do_notify_resume_user
1240.ret15:	.restore sp
1241	adds sp=16,sp				// pop scratch stack space
1242	;;
1243	ld8 r9=[sp]				// load new unat from sigscratch->scratch_unat
1244	mov rp=loc0
1245	;;
1246	mov ar.unat=r9
1247	mov ar.pfs=loc1
1248	br.ret.sptk.many rp
1249END(notify_resume_user)
1250
1251ENTRY(sys_rt_sigreturn)
1252	PT_REGS_UNWIND_INFO(0)
1253	/*
1254	 * Allocate 8 input registers since ptrace() may clobber them
1255	 */
1256	alloc r2=ar.pfs,8,0,1,0
1257	.prologue
1258	PT_REGS_SAVES(16)
1259	adds sp=-16,sp
1260	.body
1261	cmp.eq pNonSys,pSys=r0,r0		// sigreturn isn't a normal syscall...
1262	;;
1263	/*
1264	 * leave_kernel() restores f6-f11 from pt_regs, but since the streamlined
1265	 * syscall-entry path does not save them we save them here instead.  Note: we
1266	 * don't need to save any other registers that are not saved by the stream-lined
1267	 * syscall path, because restore_sigcontext() restores them.
1268	 */
1269	adds r16=PT(F6)+32,sp
1270	adds r17=PT(F7)+32,sp
1271	;;
1272 	stf.spill [r16]=f6,32
1273 	stf.spill [r17]=f7,32
1274	;;
1275 	stf.spill [r16]=f8,32
1276 	stf.spill [r17]=f9,32
1277	;;
1278 	stf.spill [r16]=f10
1279 	stf.spill [r17]=f11
1280	adds out0=16,sp				// out0 = &sigscratch
1281	br.call.sptk.many rp=ia64_rt_sigreturn
1282.ret19:	.restore sp,0
1283	adds sp=16,sp
1284	;;
1285	ld8 r9=[sp]				// load new ar.unat
1286	mov.sptk b7=r8,ia64_leave_kernel
1287	;;
1288	mov ar.unat=r9
1289	br.many b7
1290END(sys_rt_sigreturn)
1291
1292GLOBAL_ENTRY(ia64_prepare_handle_unaligned)
1293	.prologue
1294	/*
1295	 * r16 = fake ar.pfs, we simply need to make sure privilege is still 0
1296	 */
1297	mov r16=r0
1298	DO_SAVE_SWITCH_STACK
1299	br.call.sptk.many rp=ia64_handle_unaligned	// stack frame setup in ivt
1300.ret21:	.body
1301	DO_LOAD_SWITCH_STACK
1302	br.cond.sptk.many rp				// goes to ia64_leave_kernel
1303END(ia64_prepare_handle_unaligned)
1304
1305	//
1306	// unw_init_running(void (*callback)(info, arg), void *arg)
1307	//
1308#	define EXTRA_FRAME_SIZE	((UNW_FRAME_INFO_SIZE+15)&~15)
1309
1310GLOBAL_ENTRY(unw_init_running)
1311	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2)
1312	alloc loc1=ar.pfs,2,3,3,0
1313	;;
1314	ld8 loc2=[in0],8
1315	mov loc0=rp
1316	mov r16=loc1
1317	DO_SAVE_SWITCH_STACK
1318	.body
1319
1320	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2)
1321	.fframe IA64_SWITCH_STACK_SIZE+EXTRA_FRAME_SIZE
1322	SWITCH_STACK_SAVES(EXTRA_FRAME_SIZE)
1323	adds sp=-EXTRA_FRAME_SIZE,sp
1324	.body
1325	;;
1326	adds out0=16,sp				// &info
1327	mov out1=r13				// current
1328	adds out2=16+EXTRA_FRAME_SIZE,sp	// &switch_stack
1329	br.call.sptk.many rp=unw_init_frame_info
13301:	adds out0=16,sp				// &info
1331	mov b6=loc2
1332	mov loc2=gp				// save gp across indirect function call
1333	;;
1334	ld8 gp=[in0]
1335	mov out1=in1				// arg
1336	br.call.sptk.many rp=b6			// invoke the callback function
13371:	mov gp=loc2				// restore gp
1338
1339	// For now, we don't allow changing registers from within
1340	// unw_init_running; if we ever want to allow that, we'd
1341	// have to do a load_switch_stack here:
1342	.restore sp
1343	adds sp=IA64_SWITCH_STACK_SIZE+EXTRA_FRAME_SIZE,sp
1344
1345	mov ar.pfs=loc1
1346	mov rp=loc0
1347	br.ret.sptk.many rp
1348END(unw_init_running)
1349EXPORT_SYMBOL(unw_init_running)
1350
1351#ifdef CONFIG_FUNCTION_TRACER
1352#ifdef CONFIG_DYNAMIC_FTRACE
1353GLOBAL_ENTRY(_mcount)
1354	br ftrace_stub
1355END(_mcount)
1356EXPORT_SYMBOL(_mcount)
1357
1358.here:
1359	br.ret.sptk.many b0
1360
1361GLOBAL_ENTRY(ftrace_caller)
1362	alloc out0 = ar.pfs, 8, 0, 4, 0
1363	mov out3 = r0
1364	;;
1365	mov out2 = b0
1366	add r3 = 0x20, r3
1367	mov out1 = r1;
1368	br.call.sptk.many b0 = ftrace_patch_gp
1369	//this might be called from module, so we must patch gp
1370ftrace_patch_gp:
1371	movl gp=__gp
1372	mov b0 = r3
1373	;;
1374.global ftrace_call;
1375ftrace_call:
1376{
1377	.mlx
1378	nop.m 0x0
1379	movl r3 = .here;;
1380}
1381	alloc loc0 = ar.pfs, 4, 4, 2, 0
1382	;;
1383	mov loc1 = b0
1384	mov out0 = b0
1385	mov loc2 = r8
1386	mov loc3 = r15
1387	;;
1388	adds out0 = -MCOUNT_INSN_SIZE, out0
1389	mov out1 = in2
1390	mov b6 = r3
1391
1392	br.call.sptk.many b0 = b6
1393	;;
1394	mov ar.pfs = loc0
1395	mov b0 = loc1
1396	mov r8 = loc2
1397	mov r15 = loc3
1398	br ftrace_stub
1399	;;
1400END(ftrace_caller)
1401
1402#else
1403GLOBAL_ENTRY(_mcount)
1404	movl r2 = ftrace_stub
1405	movl r3 = ftrace_trace_function;;
1406	ld8 r3 = [r3];;
1407	ld8 r3 = [r3];;
1408	cmp.eq p7,p0 = r2, r3
1409(p7)	br.sptk.many ftrace_stub
1410	;;
1411
1412	alloc loc0 = ar.pfs, 4, 4, 2, 0
1413	;;
1414	mov loc1 = b0
1415	mov out0 = b0
1416	mov loc2 = r8
1417	mov loc3 = r15
1418	;;
1419	adds out0 = -MCOUNT_INSN_SIZE, out0
1420	mov out1 = in2
1421	mov b6 = r3
1422
1423	br.call.sptk.many b0 = b6
1424	;;
1425	mov ar.pfs = loc0
1426	mov b0 = loc1
1427	mov r8 = loc2
1428	mov r15 = loc3
1429	br ftrace_stub
1430	;;
1431END(_mcount)
1432#endif
1433
1434GLOBAL_ENTRY(ftrace_stub)
1435	mov r3 = b0
1436	movl r2 = _mcount_ret_helper
1437	;;
1438	mov b6 = r2
1439	mov b7 = r3
1440	br.ret.sptk.many b6
1441
1442_mcount_ret_helper:
1443	mov b0 = r42
1444	mov r1 = r41
1445	mov ar.pfs = r40
1446	br b7
1447END(ftrace_stub)
1448
1449#endif /* CONFIG_FUNCTION_TRACER */
1450
1451	.rodata
1452	.align 8
1453	.globl sys_call_table
1454sys_call_table:
1455	data8 sys_ni_syscall		//  This must be sys_ni_syscall!  See ivt.S.
1456	data8 sys_exit				// 1025
1457	data8 sys_read
1458	data8 sys_write
1459	data8 sys_open
1460	data8 sys_close
1461	data8 sys_creat				// 1030
1462	data8 sys_link
1463	data8 sys_unlink
1464	data8 ia64_execve
1465	data8 sys_chdir
1466	data8 sys_fchdir			// 1035
1467	data8 sys_utimes
1468	data8 sys_mknod
1469	data8 sys_chmod
1470	data8 sys_chown
1471	data8 sys_lseek				// 1040
1472	data8 sys_getpid
1473	data8 sys_getppid
1474	data8 sys_mount
1475	data8 sys_umount
1476	data8 sys_setuid			// 1045
1477	data8 sys_getuid
1478	data8 sys_geteuid
1479	data8 sys_ptrace
1480	data8 sys_access
1481	data8 sys_sync				// 1050
1482	data8 sys_fsync
1483	data8 sys_fdatasync
1484	data8 sys_kill
1485	data8 sys_rename
1486	data8 sys_mkdir				// 1055
1487	data8 sys_rmdir
1488	data8 sys_dup
1489	data8 sys_ia64_pipe
1490	data8 sys_times
1491	data8 ia64_brk				// 1060
1492	data8 sys_setgid
1493	data8 sys_getgid
1494	data8 sys_getegid
1495	data8 sys_acct
1496	data8 sys_ioctl				// 1065
1497	data8 sys_fcntl
1498	data8 sys_umask
1499	data8 sys_chroot
1500	data8 sys_ustat
1501	data8 sys_dup2				// 1070
1502	data8 sys_setreuid
1503	data8 sys_setregid
1504	data8 sys_getresuid
1505	data8 sys_setresuid
1506	data8 sys_getresgid			// 1075
1507	data8 sys_setresgid
1508	data8 sys_getgroups
1509	data8 sys_setgroups
1510	data8 sys_getpgid
1511	data8 sys_setpgid			// 1080
1512	data8 sys_setsid
1513	data8 sys_getsid
1514	data8 sys_sethostname
1515	data8 sys_setrlimit
1516	data8 sys_getrlimit			// 1085
1517	data8 sys_getrusage
1518	data8 sys_gettimeofday
1519	data8 sys_settimeofday
1520	data8 sys_select
1521	data8 sys_poll				// 1090
1522	data8 sys_symlink
1523	data8 sys_readlink
1524	data8 sys_uselib
1525	data8 sys_swapon
1526	data8 sys_swapoff			// 1095
1527	data8 sys_reboot
1528	data8 sys_truncate
1529	data8 sys_ftruncate
1530	data8 sys_fchmod
1531	data8 sys_fchown			// 1100
1532	data8 ia64_getpriority
1533	data8 sys_setpriority
1534	data8 sys_statfs
1535	data8 sys_fstatfs
1536	data8 sys_gettid			// 1105
1537	data8 sys_semget
1538	data8 sys_semop
1539	data8 sys_semctl
1540	data8 sys_msgget
1541	data8 sys_msgsnd			// 1110
1542	data8 sys_msgrcv
1543	data8 sys_msgctl
1544	data8 sys_shmget
1545	data8 sys_shmat
1546	data8 sys_shmdt				// 1115
1547	data8 sys_shmctl
1548	data8 sys_syslog
1549	data8 sys_setitimer
1550	data8 sys_getitimer
1551	data8 sys_ni_syscall			// 1120		/* was: ia64_oldstat */
1552	data8 sys_ni_syscall					/* was: ia64_oldlstat */
1553	data8 sys_ni_syscall					/* was: ia64_oldfstat */
1554	data8 sys_vhangup
1555	data8 sys_lchown
1556	data8 sys_remap_file_pages		// 1125
1557	data8 sys_wait4
1558	data8 sys_sysinfo
1559	data8 sys_clone
1560	data8 sys_setdomainname
1561	data8 sys_newuname			// 1130
1562	data8 sys_adjtimex
1563	data8 sys_ni_syscall					/* was: ia64_create_module */
1564	data8 sys_init_module
1565	data8 sys_delete_module
1566	data8 sys_ni_syscall			// 1135		/* was: sys_get_kernel_syms */
1567	data8 sys_ni_syscall					/* was: sys_query_module */
1568	data8 sys_quotactl
1569	data8 sys_bdflush
1570	data8 sys_sysfs
1571	data8 sys_personality			// 1140
1572	data8 sys_ni_syscall		// sys_afs_syscall
1573	data8 sys_setfsuid
1574	data8 sys_setfsgid
1575	data8 sys_getdents
1576	data8 sys_flock				// 1145
1577	data8 sys_readv
1578	data8 sys_writev
1579	data8 sys_pread64
1580	data8 sys_pwrite64
1581	data8 sys_sysctl			// 1150
1582	data8 sys_mmap
1583	data8 sys_munmap
1584	data8 sys_mlock
1585	data8 sys_mlockall
1586	data8 sys_mprotect			// 1155
1587	data8 ia64_mremap
1588	data8 sys_msync
1589	data8 sys_munlock
1590	data8 sys_munlockall
1591	data8 sys_sched_getparam		// 1160
1592	data8 sys_sched_setparam
1593	data8 sys_sched_getscheduler
1594	data8 sys_sched_setscheduler
1595	data8 sys_sched_yield
1596	data8 sys_sched_get_priority_max	// 1165
1597	data8 sys_sched_get_priority_min
1598	data8 sys_sched_rr_get_interval
1599	data8 sys_nanosleep
1600	data8 sys_ni_syscall			// old nfsservctl
1601	data8 sys_prctl				// 1170
1602	data8 sys_getpagesize
1603	data8 sys_mmap2
1604	data8 sys_pciconfig_read
1605	data8 sys_pciconfig_write
1606	data8 sys_perfmonctl			// 1175
1607	data8 sys_sigaltstack
1608	data8 sys_rt_sigaction
1609	data8 sys_rt_sigpending
1610	data8 sys_rt_sigprocmask
1611	data8 sys_rt_sigqueueinfo		// 1180
1612	data8 sys_rt_sigreturn
1613	data8 sys_rt_sigsuspend
1614	data8 sys_rt_sigtimedwait
1615	data8 sys_getcwd
1616	data8 sys_capget			// 1185
1617	data8 sys_capset
1618	data8 sys_sendfile64
1619	data8 sys_ni_syscall		// sys_getpmsg (STREAMS)
1620	data8 sys_ni_syscall		// sys_putpmsg (STREAMS)
1621	data8 sys_socket			// 1190
1622	data8 sys_bind
1623	data8 sys_connect
1624	data8 sys_listen
1625	data8 sys_accept
1626	data8 sys_getsockname			// 1195
1627	data8 sys_getpeername
1628	data8 sys_socketpair
1629	data8 sys_send
1630	data8 sys_sendto
1631	data8 sys_recv				// 1200
1632	data8 sys_recvfrom
1633	data8 sys_shutdown
1634	data8 sys_setsockopt
1635	data8 sys_getsockopt
1636	data8 sys_sendmsg			// 1205
1637	data8 sys_recvmsg
1638	data8 sys_pivot_root
1639	data8 sys_mincore
1640	data8 sys_madvise
1641	data8 sys_newstat			// 1210
1642	data8 sys_newlstat
1643	data8 sys_newfstat
1644	data8 sys_clone2
1645	data8 sys_getdents64
1646	data8 sys_getunwind			// 1215
1647	data8 sys_readahead
1648	data8 sys_setxattr
1649	data8 sys_lsetxattr
1650	data8 sys_fsetxattr
1651	data8 sys_getxattr			// 1220
1652	data8 sys_lgetxattr
1653	data8 sys_fgetxattr
1654	data8 sys_listxattr
1655	data8 sys_llistxattr
1656	data8 sys_flistxattr			// 1225
1657	data8 sys_removexattr
1658	data8 sys_lremovexattr
1659	data8 sys_fremovexattr
1660	data8 sys_tkill
1661	data8 sys_futex				// 1230
1662	data8 sys_sched_setaffinity
1663	data8 sys_sched_getaffinity
1664	data8 sys_set_tid_address
1665	data8 sys_fadvise64_64
1666	data8 sys_tgkill 			// 1235
1667	data8 sys_exit_group
1668	data8 sys_lookup_dcookie
1669	data8 sys_io_setup
1670	data8 sys_io_destroy
1671	data8 sys_io_getevents			// 1240
1672	data8 sys_io_submit
1673	data8 sys_io_cancel
1674	data8 sys_epoll_create
1675	data8 sys_epoll_ctl
1676	data8 sys_epoll_wait			// 1245
1677	data8 sys_restart_syscall
1678	data8 sys_semtimedop
1679	data8 sys_timer_create
1680	data8 sys_timer_settime
1681	data8 sys_timer_gettime			// 1250
1682	data8 sys_timer_getoverrun
1683	data8 sys_timer_delete
1684	data8 sys_clock_settime
1685	data8 sys_clock_gettime
1686	data8 sys_clock_getres			// 1255
1687	data8 sys_clock_nanosleep
1688	data8 sys_fstatfs64
1689	data8 sys_statfs64
1690	data8 sys_mbind
1691	data8 sys_get_mempolicy			// 1260
1692	data8 sys_set_mempolicy
1693	data8 sys_mq_open
1694	data8 sys_mq_unlink
1695	data8 sys_mq_timedsend
1696	data8 sys_mq_timedreceive		// 1265
1697	data8 sys_mq_notify
1698	data8 sys_mq_getsetattr
1699	data8 sys_kexec_load
1700	data8 sys_ni_syscall			// reserved for vserver
1701	data8 sys_waitid			// 1270
1702	data8 sys_add_key
1703	data8 sys_request_key
1704	data8 sys_keyctl
1705	data8 sys_ioprio_set
1706	data8 sys_ioprio_get			// 1275
1707	data8 sys_move_pages
1708	data8 sys_inotify_init
1709	data8 sys_inotify_add_watch
1710	data8 sys_inotify_rm_watch
1711	data8 sys_migrate_pages			// 1280
1712	data8 sys_openat
1713	data8 sys_mkdirat
1714	data8 sys_mknodat
1715	data8 sys_fchownat
1716	data8 sys_futimesat			// 1285
1717	data8 sys_newfstatat
1718	data8 sys_unlinkat
1719	data8 sys_renameat
1720	data8 sys_linkat
1721	data8 sys_symlinkat			// 1290
1722	data8 sys_readlinkat
1723	data8 sys_fchmodat
1724	data8 sys_faccessat
1725	data8 sys_pselect6
1726	data8 sys_ppoll				// 1295
1727	data8 sys_unshare
1728	data8 sys_splice
1729	data8 sys_set_robust_list
1730	data8 sys_get_robust_list
1731	data8 sys_sync_file_range		// 1300
1732	data8 sys_tee
1733	data8 sys_vmsplice
1734	data8 sys_fallocate
1735	data8 sys_getcpu
1736	data8 sys_epoll_pwait			// 1305
1737	data8 sys_utimensat
1738	data8 sys_signalfd
1739	data8 sys_ni_syscall
1740	data8 sys_eventfd
1741	data8 sys_timerfd_create		// 1310
1742	data8 sys_timerfd_settime
1743	data8 sys_timerfd_gettime
1744	data8 sys_signalfd4
1745	data8 sys_eventfd2
1746	data8 sys_epoll_create1			// 1315
1747	data8 sys_dup3
1748	data8 sys_pipe2
1749	data8 sys_inotify_init1
1750	data8 sys_preadv
1751	data8 sys_pwritev			// 1320
1752	data8 sys_rt_tgsigqueueinfo
1753	data8 sys_recvmmsg
1754	data8 sys_fanotify_init
1755	data8 sys_fanotify_mark
1756	data8 sys_prlimit64			// 1325
1757	data8 sys_name_to_handle_at
1758	data8 sys_open_by_handle_at
1759	data8 sys_clock_adjtime
1760	data8 sys_syncfs
1761	data8 sys_setns				// 1330
1762	data8 sys_sendmmsg
1763	data8 sys_process_vm_readv
1764	data8 sys_process_vm_writev
1765	data8 sys_accept4
1766	data8 sys_finit_module			// 1335
1767	data8 sys_sched_setattr
1768	data8 sys_sched_getattr
1769	data8 sys_renameat2
1770	data8 sys_getrandom
1771	data8 sys_memfd_create			// 1340
1772	data8 sys_bpf
1773	data8 sys_execveat
1774	data8 sys_userfaultfd
1775	data8 sys_membarrier
1776	data8 sys_kcmp				// 1345
1777	data8 sys_mlock2
1778	data8 sys_copy_file_range
1779	data8 sys_preadv2
1780	data8 sys_pwritev2
1781
1782	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
1783