xref: /openbmc/linux/arch/ia64/kernel/efi_stub.S (revision 9be08a27)
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * EFI call stub.
4 *
5 * Copyright (C) 1999-2001 Hewlett-Packard Co
6 *	David Mosberger <davidm@hpl.hp.com>
7 *
8 * This stub allows us to make EFI calls in physical mode with interrupts
9 * turned off.  We need this because we can't call SetVirtualMap() until
10 * the kernel has booted far enough to allow allocation of struct vma_struct
11 * entries (which we would need to map stuff with memory attributes other
12 * than uncached or writeback...).  Since the GetTime() service gets called
13 * earlier than that, we need to be able to make physical mode EFI calls from
14 * the kernel.
15 */
16
17/*
18 * PSR settings as per SAL spec (Chapter 8 in the "IA-64 System
19 * Abstraction Layer Specification", revision 2.6e).  Note that
20 * psr.dfl and psr.dfh MUST be cleared, despite what this manual says.
21 * Otherwise, SAL dies whenever it's trying to do an IA-32 BIOS call
22 * (the br.ia instruction fails unless psr.dfl and psr.dfh are
23 * cleared).  Fortunately, SAL promises not to touch the floating
24 * point regs, so at least we don't have to save f2-f127.
25 */
26#define PSR_BITS_TO_CLEAR						\
27	(IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_RT |		\
28	 IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED |	\
29	 IA64_PSR_DFL | IA64_PSR_DFH)
30
31#define PSR_BITS_TO_SET							\
32	(IA64_PSR_BN)
33
34#include <asm/processor.h>
35#include <asm/asmmacro.h>
36
37/*
38 * Inputs:
39 *	in0 = address of function descriptor of EFI routine to call
40 *	in1..in7 = arguments to routine
41 *
42 * Outputs:
43 *	r8 = EFI_STATUS returned by called function
44 */
45
46GLOBAL_ENTRY(efi_call_phys)
47	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
48	alloc loc1=ar.pfs,8,7,7,0
49	ld8 r2=[in0],8			// load EFI function's entry point
50	mov loc0=rp
51	.body
52	;;
53	mov loc2=gp			// save global pointer
54	mov loc4=ar.rsc			// save RSE configuration
55	mov ar.rsc=0			// put RSE in enforced lazy, LE mode
56	;;
57	ld8 gp=[in0]			// load EFI function's global pointer
58	movl r16=PSR_BITS_TO_CLEAR
59	mov loc3=psr			// save processor status word
60	movl r17=PSR_BITS_TO_SET
61	;;
62	or loc3=loc3,r17
63	mov b6=r2
64	;;
65	andcm r16=loc3,r16	// get psr with IT, DT, and RT bits cleared
66	br.call.sptk.many rp=ia64_switch_mode_phys
67.ret0:	mov out4=in5
68	mov out0=in1
69	mov out1=in2
70	mov out2=in3
71	mov out3=in4
72	mov out5=in6
73	mov out6=in7
74	mov loc5=r19
75	mov loc6=r20
76	br.call.sptk.many rp=b6		// call the EFI function
77.ret1:	mov ar.rsc=0			// put RSE in enforced lazy, LE mode
78	mov r16=loc3
79	mov r19=loc5
80	mov r20=loc6
81	br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode
82.ret2:	mov ar.rsc=loc4			// restore RSE configuration
83	mov ar.pfs=loc1
84	mov rp=loc0
85	mov gp=loc2
86	br.ret.sptk.many rp
87END(efi_call_phys)
88