xref: /openbmc/linux/arch/ia64/include/asm/uaccess.h (revision 3a35093a)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_IA64_UACCESS_H
3 #define _ASM_IA64_UACCESS_H
4 
5 /*
6  * This file defines various macros to transfer memory areas across
7  * the user/kernel boundary.  This needs to be done carefully because
8  * this code is executed in kernel mode and uses user-specified
9  * addresses.  Thus, we need to be careful not to let the user to
10  * trick us into accessing kernel memory that would normally be
11  * inaccessible.  This code is also fairly performance sensitive,
12  * so we want to spend as little time doing safety checks as
13  * possible.
14  *
15  * To make matters a bit more interesting, these macros sometimes also
16  * called from within the kernel itself, in which case the address
17  * validity check must be skipped.  The get_fs() macro tells us what
18  * to do: if get_fs()==USER_DS, checking is performed, if
19  * get_fs()==KERNEL_DS, checking is bypassed.
20  *
21  * Note that even if the memory area specified by the user is in a
22  * valid address range, it is still possible that we'll get a page
23  * fault while accessing it.  This is handled by filling out an
24  * exception handler fixup entry for each instruction that has the
25  * potential to fault.  When such a fault occurs, the page fault
26  * handler checks to see whether the faulting instruction has a fixup
27  * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
28  * then resumes execution at the continuation point.
29  *
30  * Based on <asm-alpha/uaccess.h>.
31  *
32  * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
33  *	David Mosberger-Tang <davidm@hpl.hp.com>
34  */
35 
36 #include <linux/compiler.h>
37 #include <linux/page-flags.h>
38 
39 #include <asm/intrinsics.h>
40 #include <linux/pgtable.h>
41 #include <asm/io.h>
42 #include <asm/extable.h>
43 
44 /*
45  * For historical reasons, the following macros are grossly misnamed:
46  */
47 #define KERNEL_DS	((mm_segment_t) { ~0UL })		/* cf. access_ok() */
48 #define USER_DS		((mm_segment_t) { TASK_SIZE-1 })	/* cf. access_ok() */
49 
50 #define get_fs()  (current_thread_info()->addr_limit)
51 #define set_fs(x) (current_thread_info()->addr_limit = (x))
52 
53 #define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
54 
55 /*
56  * When accessing user memory, we need to make sure the entire area really is in
57  * user-level space.  In order to do this efficiently, we make sure that the page at
58  * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
59  * point inside the virtually mapped linear page table.
60  */
61 static inline int __access_ok(const void __user *p, unsigned long size)
62 {
63 	unsigned long addr = (unsigned long)p;
64 	unsigned long seg = get_fs().seg;
65 	return likely(addr <= seg) &&
66 	 (seg == KERNEL_DS.seg || likely(REGION_OFFSET(addr) < RGN_MAP_LIMIT));
67 }
68 #define access_ok(addr, size)	__access_ok((addr), (size))
69 
70 /*
71  * These are the main single-value transfer routines.  They automatically
72  * use the right size if we just have the right pointer type.
73  *
74  * Careful to not
75  * (a) re-use the arguments for side effects (sizeof/typeof is ok)
76  * (b) require any knowledge of processes at this stage
77  */
78 #define put_user(x, ptr)	__put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
79 #define get_user(x, ptr)	__get_user_check((x), (ptr), sizeof(*(ptr)))
80 
81 /*
82  * The "__xxx" versions do not do address space checking, useful when
83  * doing multiple accesses to the same area (the programmer has to do the
84  * checks by hand with "access_ok()")
85  */
86 #define __put_user(x, ptr)	__put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
87 #define __get_user(x, ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
88 
89 #ifdef ASM_SUPPORTED
90   struct __large_struct { unsigned long buf[100]; };
91 # define __m(x) (*(struct __large_struct __user *)(x))
92 
93 /* We need to declare the __ex_table section before we can use it in .xdata.  */
94 asm (".section \"__ex_table\", \"a\"\n\t.previous");
95 
96 # define __get_user_size(val, addr, n, err)							\
97 do {												\
98 	register long __gu_r8 asm ("r8") = 0;							\
99 	register long __gu_r9 asm ("r9");							\
100 	asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n"	\
101 	     "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n"						\
102 	     "[1:]"										\
103 	     : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8));			\
104 	(err) = __gu_r8;									\
105 	(val) = __gu_r9;									\
106 } while (0)
107 
108 /*
109  * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it.  This
110  * is because they do not write to any memory gcc knows about, so there are no aliasing
111  * issues.
112  */
113 # define __put_user_size(val, addr, n, err)							\
114 do {												\
115 	register long __pu_r8 asm ("r8") = 0;							\
116 	asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n"	\
117 		      "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n"					\
118 		      "[1:]"									\
119 		      : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8));		\
120 	(err) = __pu_r8;									\
121 } while (0)
122 
123 #else /* !ASM_SUPPORTED */
124 # define RELOC_TYPE	2	/* ip-rel */
125 # define __get_user_size(val, addr, n, err)				\
126 do {									\
127 	__ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE);	\
128 	(err) = ia64_getreg(_IA64_REG_R8);				\
129 	(val) = ia64_getreg(_IA64_REG_R9);				\
130 } while (0)
131 # define __put_user_size(val, addr, n, err)				\
132 do {									\
133 	__st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE,	\
134 		  (__force unsigned long) (val));			\
135 	(err) = ia64_getreg(_IA64_REG_R8);				\
136 } while (0)
137 #endif /* !ASM_SUPPORTED */
138 
139 extern void __get_user_unknown (void);
140 
141 /*
142  * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
143  * could clobber r8 and r9 (among others).  Thus, be careful not to evaluate it while
144  * using r8/r9.
145  */
146 #define __do_get_user(check, x, ptr, size)						\
147 ({											\
148 	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);				\
149 	__typeof__ (size) __gu_size = (size);						\
150 	long __gu_err = -EFAULT;							\
151 	unsigned long __gu_val = 0;							\
152 	if (!check || __access_ok(__gu_ptr, size))					\
153 		switch (__gu_size) {							\
154 		      case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break;	\
155 		      case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break;	\
156 		      case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break;	\
157 		      case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break;	\
158 		      default: __get_user_unknown(); break;				\
159 		}									\
160 	(x) = (__force __typeof__(*(__gu_ptr))) __gu_val;				\
161 	__gu_err;									\
162 })
163 
164 #define __get_user_nocheck(x, ptr, size)	__do_get_user(0, x, ptr, size)
165 #define __get_user_check(x, ptr, size)	__do_get_user(1, x, ptr, size)
166 
167 extern void __put_user_unknown (void);
168 
169 /*
170  * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
171  * could clobber r8 (among others).  Thus, be careful not to evaluate them while using r8.
172  */
173 #define __do_put_user(check, x, ptr, size)						\
174 ({											\
175 	__typeof__ (x) __pu_x = (x);							\
176 	__typeof__ (*(ptr)) __user *__pu_ptr = (ptr);					\
177 	__typeof__ (size) __pu_size = (size);						\
178 	long __pu_err = -EFAULT;							\
179 											\
180 	if (!check || __access_ok(__pu_ptr, __pu_size))					\
181 		switch (__pu_size) {							\
182 		      case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break;	\
183 		      case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break;	\
184 		      case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break;	\
185 		      case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break;	\
186 		      default: __put_user_unknown(); break;				\
187 		}									\
188 	__pu_err;									\
189 })
190 
191 #define __put_user_nocheck(x, ptr, size)	__do_put_user(0, x, ptr, size)
192 #define __put_user_check(x, ptr, size)	__do_put_user(1, x, ptr, size)
193 
194 /*
195  * Complex access routines
196  */
197 extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
198 					       unsigned long count);
199 
200 static inline unsigned long
201 raw_copy_to_user(void __user *to, const void *from, unsigned long count)
202 {
203 	return __copy_user(to, (__force void __user *) from, count);
204 }
205 
206 static inline unsigned long
207 raw_copy_from_user(void *to, const void __user *from, unsigned long count)
208 {
209 	return __copy_user((__force void __user *) to, from, count);
210 }
211 
212 #define INLINE_COPY_FROM_USER
213 #define INLINE_COPY_TO_USER
214 
215 extern unsigned long __do_clear_user (void __user *, unsigned long);
216 
217 #define __clear_user(to, n)		__do_clear_user(to, n)
218 
219 #define clear_user(to, n)					\
220 ({								\
221 	unsigned long __cu_len = (n);				\
222 	if (__access_ok(to, __cu_len))				\
223 		__cu_len = __do_clear_user(to, __cu_len);	\
224 	__cu_len;						\
225 })
226 
227 
228 /*
229  * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
230  * strlen.
231  */
232 extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
233 
234 #define strncpy_from_user(to, from, n)					\
235 ({									\
236 	const char __user * __sfu_from = (from);			\
237 	long __sfu_ret = -EFAULT;					\
238 	if (__access_ok(__sfu_from, 0))					\
239 		__sfu_ret = __strncpy_from_user((to), __sfu_from, (n));	\
240 	__sfu_ret;							\
241 })
242 
243 /*
244  * Returns: 0 if exception before NUL or reaching the supplied limit
245  * (N), a value greater than N if the limit would be exceeded, else
246  * strlen.
247  */
248 extern unsigned long __strnlen_user (const char __user *, long);
249 
250 #define strnlen_user(str, len)					\
251 ({								\
252 	const char __user *__su_str = (str);			\
253 	unsigned long __su_ret = 0;				\
254 	if (__access_ok(__su_str, 0))				\
255 		__su_ret = __strnlen_user(__su_str, len);	\
256 	__su_ret;						\
257 })
258 
259 #define ARCH_HAS_TRANSLATE_MEM_PTR	1
260 static __inline__ void *
261 xlate_dev_mem_ptr(phys_addr_t p)
262 {
263 	struct page *page;
264 	void *ptr;
265 
266 	page = pfn_to_page(p >> PAGE_SHIFT);
267 	if (PageUncached(page))
268 		ptr = (void *)p + __IA64_UNCACHED_OFFSET;
269 	else
270 		ptr = __va(p);
271 
272 	return ptr;
273 }
274 
275 /*
276  * Convert a virtual cached kernel memory pointer to an uncached pointer
277  */
278 static __inline__ void *
279 xlate_dev_kmem_ptr(void *p)
280 {
281 	struct page *page;
282 	void *ptr;
283 
284 	page = virt_to_page((unsigned long)p);
285 	if (PageUncached(page))
286 		ptr = (void *)__pa(p) + __IA64_UNCACHED_OFFSET;
287 	else
288 		ptr = p;
289 
290 	return ptr;
291 }
292 
293 #endif /* _ASM_IA64_UACCESS_H */
294