xref: /openbmc/linux/arch/ia64/include/asm/hw_irq.h (revision 160b8e75)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_IA64_HW_IRQ_H
3 #define _ASM_IA64_HW_IRQ_H
4 
5 /*
6  * Copyright (C) 2001-2003 Hewlett-Packard Co
7  *	David Mosberger-Tang <davidm@hpl.hp.com>
8  */
9 
10 #include <linux/interrupt.h>
11 #include <linux/sched.h>
12 #include <linux/types.h>
13 #include <linux/profile.h>
14 
15 #include <asm/machvec.h>
16 #include <asm/ptrace.h>
17 #include <asm/smp.h>
18 
19 typedef u8 ia64_vector;
20 
21 /*
22  * 0 special
23  *
24  * 1,3-14 are reserved from firmware
25  *
26  * 16-255 (vectored external interrupts) are available
27  *
28  * 15 spurious interrupt (see IVR)
29  *
30  * 16 lowest priority, 255 highest priority
31  *
32  * 15 classes of 16 interrupts each.
33  */
34 #define IA64_MIN_VECTORED_IRQ		 16
35 #define IA64_MAX_VECTORED_IRQ		255
36 #define IA64_NUM_VECTORS		256
37 
38 #define AUTO_ASSIGN			-1
39 
40 #define IA64_SPURIOUS_INT_VECTOR	0x0f
41 
42 /*
43  * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
44  */
45 #define IA64_CPEP_VECTOR		0x1c	/* corrected platform error polling vector */
46 #define IA64_CMCP_VECTOR		0x1d	/* corrected machine-check polling vector */
47 #define IA64_CPE_VECTOR			0x1e	/* corrected platform error interrupt vector */
48 #define IA64_CMC_VECTOR			0x1f	/* corrected machine-check interrupt vector */
49 /*
50  * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
51  * Use vectors 0x30-0xe7 as the default device vector range for ia64.
52  * Platforms may choose to reduce this range in platform_irq_setup, but the
53  * platform range must fall within
54  *	[IA64_DEF_FIRST_DEVICE_VECTOR..IA64_DEF_LAST_DEVICE_VECTOR]
55  */
56 extern int ia64_first_device_vector;
57 extern int ia64_last_device_vector;
58 
59 #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_DIG))
60 /* Reserve the lower priority vector than device vectors for "move IRQ" IPI */
61 #define IA64_IRQ_MOVE_VECTOR		0x30	/* "move IRQ" IPI */
62 #define IA64_DEF_FIRST_DEVICE_VECTOR	0x31
63 #else
64 #define IA64_DEF_FIRST_DEVICE_VECTOR	0x30
65 #endif
66 #define IA64_DEF_LAST_DEVICE_VECTOR	0xe7
67 #define IA64_FIRST_DEVICE_VECTOR	ia64_first_device_vector
68 #define IA64_LAST_DEVICE_VECTOR		ia64_last_device_vector
69 #define IA64_MAX_DEVICE_VECTORS		(IA64_DEF_LAST_DEVICE_VECTOR - IA64_DEF_FIRST_DEVICE_VECTOR + 1)
70 #define IA64_NUM_DEVICE_VECTORS		(IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
71 
72 #define IA64_MCA_RENDEZ_VECTOR		0xe8	/* MCA rendez interrupt */
73 #define IA64_PERFMON_VECTOR		0xee	/* performance monitor interrupt vector */
74 #define IA64_TIMER_VECTOR		0xef	/* use highest-prio group 15 interrupt for timer */
75 #define	IA64_MCA_WAKEUP_VECTOR		0xf0	/* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
76 #define IA64_IPI_LOCAL_TLB_FLUSH	0xfc	/* SMP flush local TLB */
77 #define IA64_IPI_RESCHEDULE		0xfd	/* SMP reschedule */
78 #define IA64_IPI_VECTOR			0xfe	/* inter-processor interrupt vector */
79 
80 /* Used for encoding redirected irqs */
81 
82 #define IA64_IRQ_REDIRECTED		(1 << 31)
83 
84 /* IA64 inter-cpu interrupt related definitions */
85 
86 #define IA64_IPI_DEFAULT_BASE_ADDR	0xfee00000
87 
88 /* Delivery modes for inter-cpu interrupts */
89 enum {
90         IA64_IPI_DM_INT =       0x0,    /* pend an external interrupt */
91         IA64_IPI_DM_PMI =       0x2,    /* pend a PMI */
92         IA64_IPI_DM_NMI =       0x4,    /* pend an NMI (vector 2) */
93         IA64_IPI_DM_INIT =      0x5,    /* pend an INIT interrupt */
94         IA64_IPI_DM_EXTINT =    0x7,    /* pend an 8259-compatible interrupt. */
95 };
96 
97 extern __u8 isa_irq_to_vector_map[16];
98 #define isa_irq_to_vector(x)	isa_irq_to_vector_map[(x)]
99 
100 struct irq_cfg {
101 	ia64_vector vector;
102 	cpumask_t domain;
103 	cpumask_t old_domain;
104 	unsigned move_cleanup_count;
105 	u8 move_in_progress : 1;
106 };
107 extern spinlock_t vector_lock;
108 extern struct irq_cfg irq_cfg[NR_IRQS];
109 #define irq_to_domain(x)	irq_cfg[(x)].domain
110 DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq);
111 
112 extern struct irq_chip irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
113 
114 #define ia64_register_ipi	ia64_native_register_ipi
115 #define assign_irq_vector	ia64_native_assign_irq_vector
116 #define free_irq_vector		ia64_native_free_irq_vector
117 #define register_percpu_irq	ia64_native_register_percpu_irq
118 #define ia64_resend_irq		ia64_native_resend_irq
119 
120 extern void ia64_native_register_ipi(void);
121 extern int bind_irq_vector(int irq, int vector, cpumask_t domain);
122 extern int ia64_native_assign_irq_vector (int irq);	/* allocate a free vector */
123 extern void ia64_native_free_irq_vector (int vector);
124 extern int reserve_irq_vector (int vector);
125 extern void __setup_vector_irq(int cpu);
126 extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
127 extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action);
128 extern void destroy_and_reserve_irq (unsigned int irq);
129 
130 #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
131 extern int irq_prepare_move(int irq, int cpu);
132 extern void irq_complete_move(unsigned int irq);
133 #else
134 static inline int irq_prepare_move(int irq, int cpu) { return 0; }
135 static inline void irq_complete_move(unsigned int irq) {}
136 #endif
137 
138 static inline void ia64_native_resend_irq(unsigned int vector)
139 {
140 	platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
141 }
142 
143 /*
144  * Default implementations for the irq-descriptor API:
145  */
146 #ifndef CONFIG_IA64_GENERIC
147 static inline ia64_vector __ia64_irq_to_vector(int irq)
148 {
149 	return irq_cfg[irq].vector;
150 }
151 
152 static inline unsigned int
153 __ia64_local_vector_to_irq (ia64_vector vec)
154 {
155 	return __this_cpu_read(vector_irq[vec]);
156 }
157 #endif
158 
159 /*
160  * Next follows the irq descriptor interface.  On IA-64, each CPU supports 256 interrupt
161  * vectors.  On smaller systems, there is a one-to-one correspondence between interrupt
162  * vectors and the Linux irq numbers.  However, larger systems may have multiple interrupt
163  * domains meaning that the translation from vector number to irq number depends on the
164  * interrupt domain that a CPU belongs to.  This API abstracts such platform-dependent
165  * differences and provides a uniform means to translate between vector and irq numbers
166  * and to obtain the irq descriptor for a given irq number.
167  */
168 
169 /* Extract the IA-64 vector that corresponds to IRQ.  */
170 static inline ia64_vector
171 irq_to_vector (int irq)
172 {
173 	return platform_irq_to_vector(irq);
174 }
175 
176 /*
177  * Convert the local IA-64 vector to the corresponding irq number.  This translation is
178  * done in the context of the interrupt domain that the currently executing CPU belongs
179  * to.
180  */
181 static inline unsigned int
182 local_vector_to_irq (ia64_vector vec)
183 {
184 	return platform_local_vector_to_irq(vec);
185 }
186 
187 #endif /* _ASM_IA64_HW_IRQ_H */
188