1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _ASM_IA64_BITOPS_H 3 #define _ASM_IA64_BITOPS_H 4 5 /* 6 * Copyright (C) 1998-2003 Hewlett-Packard Co 7 * David Mosberger-Tang <davidm@hpl.hp.com> 8 * 9 * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 10 * O(1) scheduler patch 11 */ 12 13 #ifndef _LINUX_BITOPS_H 14 #error only <linux/bitops.h> can be included directly 15 #endif 16 17 #include <linux/compiler.h> 18 #include <linux/types.h> 19 #include <asm/intrinsics.h> 20 #include <asm/barrier.h> 21 22 /** 23 * set_bit - Atomically set a bit in memory 24 * @nr: the bit to set 25 * @addr: the address to start counting from 26 * 27 * This function is atomic and may not be reordered. See __set_bit() 28 * if you do not require the atomic guarantees. 29 * Note that @nr may be almost arbitrarily large; this function is not 30 * restricted to acting on a single-word quantity. 31 * 32 * The address must be (at least) "long" aligned. 33 * Note that there are driver (e.g., eepro100) which use these operations to 34 * operate on hw-defined data-structures, so we can't easily change these 35 * operations to force a bigger alignment. 36 * 37 * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). 38 */ 39 static __inline__ void 40 set_bit (int nr, volatile void *addr) 41 { 42 __u32 bit, old, new; 43 volatile __u32 *m; 44 CMPXCHG_BUGCHECK_DECL 45 46 m = (volatile __u32 *) addr + (nr >> 5); 47 bit = 1 << (nr & 31); 48 do { 49 CMPXCHG_BUGCHECK(m); 50 old = *m; 51 new = old | bit; 52 } while (cmpxchg_acq(m, old, new) != old); 53 } 54 55 /** 56 * __set_bit - Set a bit in memory 57 * @nr: the bit to set 58 * @addr: the address to start counting from 59 * 60 * Unlike set_bit(), this function is non-atomic and may be reordered. 61 * If it's called on the same region of memory simultaneously, the effect 62 * may be that only one operation succeeds. 63 */ 64 static __inline__ void 65 __set_bit (int nr, volatile void *addr) 66 { 67 *((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31)); 68 } 69 70 /** 71 * clear_bit - Clears a bit in memory 72 * @nr: Bit to clear 73 * @addr: Address to start counting from 74 * 75 * clear_bit() is atomic and may not be reordered. However, it does 76 * not contain a memory barrier, so if it is used for locking purposes, 77 * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() 78 * in order to ensure changes are visible on other processors. 79 */ 80 static __inline__ void 81 clear_bit (int nr, volatile void *addr) 82 { 83 __u32 mask, old, new; 84 volatile __u32 *m; 85 CMPXCHG_BUGCHECK_DECL 86 87 m = (volatile __u32 *) addr + (nr >> 5); 88 mask = ~(1 << (nr & 31)); 89 do { 90 CMPXCHG_BUGCHECK(m); 91 old = *m; 92 new = old & mask; 93 } while (cmpxchg_acq(m, old, new) != old); 94 } 95 96 /** 97 * clear_bit_unlock - Clears a bit in memory with release 98 * @nr: Bit to clear 99 * @addr: Address to start counting from 100 * 101 * clear_bit_unlock() is atomic and may not be reordered. It does 102 * contain a memory barrier suitable for unlock type operations. 103 */ 104 static __inline__ void 105 clear_bit_unlock (int nr, volatile void *addr) 106 { 107 __u32 mask, old, new; 108 volatile __u32 *m; 109 CMPXCHG_BUGCHECK_DECL 110 111 m = (volatile __u32 *) addr + (nr >> 5); 112 mask = ~(1 << (nr & 31)); 113 do { 114 CMPXCHG_BUGCHECK(m); 115 old = *m; 116 new = old & mask; 117 } while (cmpxchg_rel(m, old, new) != old); 118 } 119 120 /** 121 * __clear_bit_unlock - Non-atomically clears a bit in memory with release 122 * @nr: Bit to clear 123 * @addr: Address to start counting from 124 * 125 * Similarly to clear_bit_unlock, the implementation uses a store 126 * with release semantics. See also arch_spin_unlock(). 127 */ 128 static __inline__ void 129 __clear_bit_unlock(int nr, void *addr) 130 { 131 __u32 * const m = (__u32 *) addr + (nr >> 5); 132 __u32 const new = *m & ~(1 << (nr & 31)); 133 134 ia64_st4_rel_nta(m, new); 135 } 136 137 /** 138 * __clear_bit - Clears a bit in memory (non-atomic version) 139 * @nr: the bit to clear 140 * @addr: the address to start counting from 141 * 142 * Unlike clear_bit(), this function is non-atomic and may be reordered. 143 * If it's called on the same region of memory simultaneously, the effect 144 * may be that only one operation succeeds. 145 */ 146 static __inline__ void 147 __clear_bit (int nr, volatile void *addr) 148 { 149 *((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31)); 150 } 151 152 /** 153 * change_bit - Toggle a bit in memory 154 * @nr: Bit to toggle 155 * @addr: Address to start counting from 156 * 157 * change_bit() is atomic and may not be reordered. 158 * Note that @nr may be almost arbitrarily large; this function is not 159 * restricted to acting on a single-word quantity. 160 */ 161 static __inline__ void 162 change_bit (int nr, volatile void *addr) 163 { 164 __u32 bit, old, new; 165 volatile __u32 *m; 166 CMPXCHG_BUGCHECK_DECL 167 168 m = (volatile __u32 *) addr + (nr >> 5); 169 bit = (1 << (nr & 31)); 170 do { 171 CMPXCHG_BUGCHECK(m); 172 old = *m; 173 new = old ^ bit; 174 } while (cmpxchg_acq(m, old, new) != old); 175 } 176 177 /** 178 * __change_bit - Toggle a bit in memory 179 * @nr: the bit to toggle 180 * @addr: the address to start counting from 181 * 182 * Unlike change_bit(), this function is non-atomic and may be reordered. 183 * If it's called on the same region of memory simultaneously, the effect 184 * may be that only one operation succeeds. 185 */ 186 static __inline__ void 187 __change_bit (int nr, volatile void *addr) 188 { 189 *((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31)); 190 } 191 192 /** 193 * test_and_set_bit - Set a bit and return its old value 194 * @nr: Bit to set 195 * @addr: Address to count from 196 * 197 * This operation is atomic and cannot be reordered. 198 * It also implies the acquisition side of the memory barrier. 199 */ 200 static __inline__ int 201 test_and_set_bit (int nr, volatile void *addr) 202 { 203 __u32 bit, old, new; 204 volatile __u32 *m; 205 CMPXCHG_BUGCHECK_DECL 206 207 m = (volatile __u32 *) addr + (nr >> 5); 208 bit = 1 << (nr & 31); 209 do { 210 CMPXCHG_BUGCHECK(m); 211 old = *m; 212 new = old | bit; 213 } while (cmpxchg_acq(m, old, new) != old); 214 return (old & bit) != 0; 215 } 216 217 /** 218 * test_and_set_bit_lock - Set a bit and return its old value for lock 219 * @nr: Bit to set 220 * @addr: Address to count from 221 * 222 * This is the same as test_and_set_bit on ia64 223 */ 224 #define test_and_set_bit_lock test_and_set_bit 225 226 /** 227 * __test_and_set_bit - Set a bit and return its old value 228 * @nr: Bit to set 229 * @addr: Address to count from 230 * 231 * This operation is non-atomic and can be reordered. 232 * If two examples of this operation race, one can appear to succeed 233 * but actually fail. You must protect multiple accesses with a lock. 234 */ 235 static __inline__ int 236 __test_and_set_bit (int nr, volatile void *addr) 237 { 238 __u32 *p = (__u32 *) addr + (nr >> 5); 239 __u32 m = 1 << (nr & 31); 240 int oldbitset = (*p & m) != 0; 241 242 *p |= m; 243 return oldbitset; 244 } 245 246 /** 247 * test_and_clear_bit - Clear a bit and return its old value 248 * @nr: Bit to clear 249 * @addr: Address to count from 250 * 251 * This operation is atomic and cannot be reordered. 252 * It also implies the acquisition side of the memory barrier. 253 */ 254 static __inline__ int 255 test_and_clear_bit (int nr, volatile void *addr) 256 { 257 __u32 mask, old, new; 258 volatile __u32 *m; 259 CMPXCHG_BUGCHECK_DECL 260 261 m = (volatile __u32 *) addr + (nr >> 5); 262 mask = ~(1 << (nr & 31)); 263 do { 264 CMPXCHG_BUGCHECK(m); 265 old = *m; 266 new = old & mask; 267 } while (cmpxchg_acq(m, old, new) != old); 268 return (old & ~mask) != 0; 269 } 270 271 /** 272 * __test_and_clear_bit - Clear a bit and return its old value 273 * @nr: Bit to clear 274 * @addr: Address to count from 275 * 276 * This operation is non-atomic and can be reordered. 277 * If two examples of this operation race, one can appear to succeed 278 * but actually fail. You must protect multiple accesses with a lock. 279 */ 280 static __inline__ int 281 __test_and_clear_bit(int nr, volatile void * addr) 282 { 283 __u32 *p = (__u32 *) addr + (nr >> 5); 284 __u32 m = 1 << (nr & 31); 285 int oldbitset = (*p & m) != 0; 286 287 *p &= ~m; 288 return oldbitset; 289 } 290 291 /** 292 * test_and_change_bit - Change a bit and return its old value 293 * @nr: Bit to change 294 * @addr: Address to count from 295 * 296 * This operation is atomic and cannot be reordered. 297 * It also implies the acquisition side of the memory barrier. 298 */ 299 static __inline__ int 300 test_and_change_bit (int nr, volatile void *addr) 301 { 302 __u32 bit, old, new; 303 volatile __u32 *m; 304 CMPXCHG_BUGCHECK_DECL 305 306 m = (volatile __u32 *) addr + (nr >> 5); 307 bit = (1 << (nr & 31)); 308 do { 309 CMPXCHG_BUGCHECK(m); 310 old = *m; 311 new = old ^ bit; 312 } while (cmpxchg_acq(m, old, new) != old); 313 return (old & bit) != 0; 314 } 315 316 /** 317 * __test_and_change_bit - Change a bit and return its old value 318 * @nr: Bit to change 319 * @addr: Address to count from 320 * 321 * This operation is non-atomic and can be reordered. 322 */ 323 static __inline__ int 324 __test_and_change_bit (int nr, void *addr) 325 { 326 __u32 old, bit = (1 << (nr & 31)); 327 __u32 *m = (__u32 *) addr + (nr >> 5); 328 329 old = *m; 330 *m = old ^ bit; 331 return (old & bit) != 0; 332 } 333 334 static __inline__ int 335 test_bit (int nr, const volatile void *addr) 336 { 337 return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31)); 338 } 339 340 /** 341 * ffz - find the first zero bit in a long word 342 * @x: The long word to find the bit in 343 * 344 * Returns the bit-number (0..63) of the first (least significant) zero bit. 345 * Undefined if no zero exists, so code should check against ~0UL first... 346 */ 347 static inline unsigned long 348 ffz (unsigned long x) 349 { 350 unsigned long result; 351 352 result = ia64_popcnt(x & (~x - 1)); 353 return result; 354 } 355 356 /** 357 * __ffs - find first bit in word. 358 * @x: The word to search 359 * 360 * Undefined if no bit exists, so code should check against 0 first. 361 */ 362 static __inline__ unsigned long 363 __ffs (unsigned long x) 364 { 365 unsigned long result; 366 367 result = ia64_popcnt((x-1) & ~x); 368 return result; 369 } 370 371 #ifdef __KERNEL__ 372 373 /* 374 * Return bit number of last (most-significant) bit set. Undefined 375 * for x==0. Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3). 376 */ 377 static inline unsigned long 378 ia64_fls (unsigned long x) 379 { 380 long double d = x; 381 long exp; 382 383 exp = ia64_getf_exp(d); 384 return exp - 0xffff; 385 } 386 387 /* 388 * Find the last (most significant) bit set. Returns 0 for x==0 and 389 * bits are numbered from 1..32 (e.g., fls(9) == 4). 390 */ 391 static inline int fls(unsigned int t) 392 { 393 unsigned long x = t & 0xffffffffu; 394 395 if (!x) 396 return 0; 397 x |= x >> 1; 398 x |= x >> 2; 399 x |= x >> 4; 400 x |= x >> 8; 401 x |= x >> 16; 402 return ia64_popcnt(x); 403 } 404 405 /* 406 * Find the last (most significant) bit set. Undefined for x==0. 407 * Bits are numbered from 0..63 (e.g., __fls(9) == 3). 408 */ 409 static inline unsigned long 410 __fls (unsigned long x) 411 { 412 x |= x >> 1; 413 x |= x >> 2; 414 x |= x >> 4; 415 x |= x >> 8; 416 x |= x >> 16; 417 x |= x >> 32; 418 return ia64_popcnt(x) - 1; 419 } 420 421 #include <asm-generic/bitops/fls64.h> 422 423 #include <asm-generic/bitops/builtin-ffs.h> 424 425 /* 426 * hweightN: returns the hamming weight (i.e. the number 427 * of bits set) of a N-bit word 428 */ 429 static __inline__ unsigned long __arch_hweight64(unsigned long x) 430 { 431 unsigned long result; 432 result = ia64_popcnt(x); 433 return result; 434 } 435 436 #define __arch_hweight32(x) ((unsigned int) __arch_hweight64((x) & 0xfffffffful)) 437 #define __arch_hweight16(x) ((unsigned int) __arch_hweight64((x) & 0xfffful)) 438 #define __arch_hweight8(x) ((unsigned int) __arch_hweight64((x) & 0xfful)) 439 440 #include <asm-generic/bitops/const_hweight.h> 441 442 #endif /* __KERNEL__ */ 443 444 #ifdef __KERNEL__ 445 446 #include <asm-generic/bitops/le.h> 447 448 #include <asm-generic/bitops/ext2-atomic-setbit.h> 449 450 #include <asm-generic/bitops/sched.h> 451 452 #endif /* __KERNEL__ */ 453 454 #endif /* _ASM_IA64_BITOPS_H */ 455