xref: /openbmc/linux/arch/ia64/include/asm/barrier.h (revision 3a83e4e6)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Memory barrier definitions.  This is based on information published
4  * in the Processor Abstraction Layer and the System Abstraction Layer
5  * manual.
6  *
7  * Copyright (C) 1998-2003 Hewlett-Packard Co
8  *	David Mosberger-Tang <davidm@hpl.hp.com>
9  * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
10  * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
11  */
12 #ifndef _ASM_IA64_BARRIER_H
13 #define _ASM_IA64_BARRIER_H
14 
15 #include <linux/compiler.h>
16 
17 /*
18  * Macros to force memory ordering.  In these descriptions, "previous"
19  * and "subsequent" refer to program order; "visible" means that all
20  * architecturally visible effects of a memory access have occurred
21  * (at a minimum, this means the memory has been read or written).
22  *
23  *   wmb():	Guarantees that all preceding stores to memory-
24  *		like regions are visible before any subsequent
25  *		stores and that all following stores will be
26  *		visible only after all previous stores.
27  *   rmb():	Like wmb(), but for reads.
28  *   mb():	wmb()/rmb() combo, i.e., all previous memory
29  *		accesses are visible before all subsequent
30  *		accesses and vice versa.  This is also known as
31  *		a "fence."
32  *
33  * Note: "mb()" and its variants cannot be used as a fence to order
34  * accesses to memory mapped I/O registers.  For that, mf.a needs to
35  * be used.  However, we don't want to always use mf.a because (a)
36  * it's (presumably) much slower than mf and (b) mf.a is supported for
37  * sequential memory pages only.
38  */
39 #define mb()		ia64_mf()
40 #define rmb()		mb()
41 #define wmb()		mb()
42 
43 #define dma_rmb()	mb()
44 #define dma_wmb()	mb()
45 
46 # define __smp_mb()	mb()
47 
48 #define __smp_mb__before_atomic()	barrier()
49 #define __smp_mb__after_atomic()	barrier()
50 
51 /*
52  * IA64 GCC turns volatile stores into st.rel and volatile loads into ld.acq no
53  * need for asm trickery!
54  */
55 
56 #define __smp_store_release(p, v)						\
57 do {									\
58 	compiletime_assert_atomic_type(*p);				\
59 	barrier();							\
60 	WRITE_ONCE(*p, v);						\
61 } while (0)
62 
63 #define __smp_load_acquire(p)						\
64 ({									\
65 	typeof(*p) ___p1 = READ_ONCE(*p);				\
66 	compiletime_assert_atomic_type(*p);				\
67 	barrier();							\
68 	___p1;								\
69 })
70 
71 /*
72  * The group barrier in front of the rsm & ssm are necessary to ensure
73  * that none of the previous instructions in the same group are
74  * affected by the rsm/ssm.
75  */
76 
77 #include <asm-generic/barrier.h>
78 
79 #endif /* _ASM_IA64_BARRIER_H */
80