xref: /openbmc/linux/arch/ia64/include/asm/barrier.h (revision 05bcf503)
1 /*
2  * Memory barrier definitions.  This is based on information published
3  * in the Processor Abstraction Layer and the System Abstraction Layer
4  * manual.
5  *
6  * Copyright (C) 1998-2003 Hewlett-Packard Co
7  *	David Mosberger-Tang <davidm@hpl.hp.com>
8  * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
9  * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
10  */
11 #ifndef _ASM_IA64_BARRIER_H
12 #define _ASM_IA64_BARRIER_H
13 
14 #include <linux/compiler.h>
15 
16 /*
17  * Macros to force memory ordering.  In these descriptions, "previous"
18  * and "subsequent" refer to program order; "visible" means that all
19  * architecturally visible effects of a memory access have occurred
20  * (at a minimum, this means the memory has been read or written).
21  *
22  *   wmb():	Guarantees that all preceding stores to memory-
23  *		like regions are visible before any subsequent
24  *		stores and that all following stores will be
25  *		visible only after all previous stores.
26  *   rmb():	Like wmb(), but for reads.
27  *   mb():	wmb()/rmb() combo, i.e., all previous memory
28  *		accesses are visible before all subsequent
29  *		accesses and vice versa.  This is also known as
30  *		a "fence."
31  *
32  * Note: "mb()" and its variants cannot be used as a fence to order
33  * accesses to memory mapped I/O registers.  For that, mf.a needs to
34  * be used.  However, we don't want to always use mf.a because (a)
35  * it's (presumably) much slower than mf and (b) mf.a is supported for
36  * sequential memory pages only.
37  */
38 #define mb()	ia64_mf()
39 #define rmb()	mb()
40 #define wmb()	mb()
41 #define read_barrier_depends()	do { } while(0)
42 
43 #ifdef CONFIG_SMP
44 # define smp_mb()	mb()
45 # define smp_rmb()	rmb()
46 # define smp_wmb()	wmb()
47 # define smp_read_barrier_depends()	read_barrier_depends()
48 #else
49 # define smp_mb()	barrier()
50 # define smp_rmb()	barrier()
51 # define smp_wmb()	barrier()
52 # define smp_read_barrier_depends()	do { } while(0)
53 #endif
54 
55 /*
56  * XXX check on this ---I suspect what Linus really wants here is
57  * acquire vs release semantics but we can't discuss this stuff with
58  * Linus just yet.  Grrr...
59  */
60 #define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
61 
62 /*
63  * The group barrier in front of the rsm & ssm are necessary to ensure
64  * that none of the previous instructions in the same group are
65  * affected by the rsm/ssm.
66  */
67 
68 #endif /* _ASM_IA64_BARRIER_H */
69