xref: /openbmc/linux/arch/hexagon/include/asm/io.h (revision 0bf49ffb)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * IO definitions for the Hexagon architecture
4  *
5  * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
6  */
7 
8 #ifndef _ASM_IO_H
9 #define _ASM_IO_H
10 
11 #ifdef __KERNEL__
12 
13 #include <linux/types.h>
14 #include <asm/iomap.h>
15 #include <asm/page.h>
16 #include <asm/cacheflush.h>
17 
18 /*
19  * We don't have PCI yet.
20  * _IO_BASE is pointing at what should be unused virtual space.
21  */
22 #define IO_SPACE_LIMIT 0xffff
23 #define _IO_BASE ((void __iomem *)0xfe000000)
24 
25 #define IOMEM(x)        ((void __force __iomem *)(x))
26 
27 extern int remap_area_pages(unsigned long start, unsigned long phys_addr,
28 				unsigned long end, unsigned long flags);
29 
30 extern void iounmap(const volatile void __iomem *addr);
31 
32 /* Defined in lib/io.c, needed for smc91x driver. */
33 extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
34 extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
35 
36 extern void __raw_readsl(const void __iomem *addr, void *data, int wordlen);
37 extern void __raw_writesl(void __iomem *addr, const void *data, int wordlen);
38 
39 #define readsw(p, d, l)	__raw_readsw(p, d, l)
40 #define writesw(p, d, l) __raw_writesw(p, d, l)
41 
42 #define readsl(p, d, l)   __raw_readsl(p, d, l)
43 #define writesl(p, d, l)  __raw_writesl(p, d, l)
44 
45 /*
46  * virt_to_phys - map virtual address to physical
47  * @address:  address to map
48  */
49 static inline unsigned long virt_to_phys(volatile void *address)
50 {
51 	return __pa(address);
52 }
53 
54 /*
55  * phys_to_virt - map physical address to virtual
56  * @address: address to map
57  */
58 static inline void *phys_to_virt(unsigned long address)
59 {
60 	return __va(address);
61 }
62 
63 /*
64  * convert a physical pointer to a virtual kernel pointer for
65  * /dev/mem access.
66  */
67 #define xlate_dev_kmem_ptr(p)    __va(p)
68 #define xlate_dev_mem_ptr(p)    __va(p)
69 
70 /*
71  * IO port access primitives.  Hexagon doesn't have special IO access
72  * instructions; all I/O is memory mapped.
73  *
74  * in/out are used for "ports", but we don't have "port instructions",
75  * so these are really just memory mapped too.
76  */
77 
78 /*
79  * readb - read byte from memory mapped device
80  * @addr:  pointer to memory
81  *
82  * Operates on "I/O bus memory space"
83  */
84 static inline u8 readb(const volatile void __iomem *addr)
85 {
86 	u8 val;
87 	asm volatile(
88 		"%0 = memb(%1);"
89 		: "=&r" (val)
90 		: "r" (addr)
91 	);
92 	return val;
93 }
94 
95 static inline u16 readw(const volatile void __iomem *addr)
96 {
97 	u16 val;
98 	asm volatile(
99 		"%0 = memh(%1);"
100 		: "=&r" (val)
101 		: "r" (addr)
102 	);
103 	return val;
104 }
105 
106 static inline u32 readl(const volatile void __iomem *addr)
107 {
108 	u32 val;
109 	asm volatile(
110 		"%0 = memw(%1);"
111 		: "=&r" (val)
112 		: "r" (addr)
113 	);
114 	return val;
115 }
116 
117 /*
118  * writeb - write a byte to a memory location
119  * @data: data to write to
120  * @addr:  pointer to memory
121  *
122  */
123 static inline void writeb(u8 data, volatile void __iomem *addr)
124 {
125 	asm volatile(
126 		"memb(%0) = %1;"
127 		:
128 		: "r" (addr), "r" (data)
129 		: "memory"
130 	);
131 }
132 
133 static inline void writew(u16 data, volatile void __iomem *addr)
134 {
135 	asm volatile(
136 		"memh(%0) = %1;"
137 		:
138 		: "r" (addr), "r" (data)
139 		: "memory"
140 	);
141 
142 }
143 
144 static inline void writel(u32 data, volatile void __iomem *addr)
145 {
146 	asm volatile(
147 		"memw(%0) = %1;"
148 		:
149 		: "r" (addr), "r" (data)
150 		: "memory"
151 	);
152 }
153 
154 #define __raw_writeb writeb
155 #define __raw_writew writew
156 #define __raw_writel writel
157 
158 #define __raw_readb readb
159 #define __raw_readw readw
160 #define __raw_readl readl
161 
162 /*
163  * http://comments.gmane.org/gmane.linux.ports.arm.kernel/117626
164  */
165 
166 #define readb_relaxed __raw_readb
167 #define readw_relaxed __raw_readw
168 #define readl_relaxed __raw_readl
169 
170 #define writeb_relaxed __raw_writeb
171 #define writew_relaxed __raw_writew
172 #define writel_relaxed __raw_writel
173 
174 void __iomem *ioremap(unsigned long phys_addr, unsigned long size);
175 #define ioremap_uc(X, Y) ioremap((X), (Y))
176 
177 
178 #define __raw_writel writel
179 
180 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
181 	int count)
182 {
183 	memcpy(dst, (void *) src, count);
184 }
185 
186 static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
187 	int count)
188 {
189 	memcpy((void *) dst, src, count);
190 }
191 
192 static inline void memset_io(volatile void __iomem *addr, int value,
193 			     size_t size)
194 {
195 	memset((void __force *)addr, value, size);
196 }
197 
198 #define PCI_IO_ADDR	(volatile void __iomem *)
199 
200 /*
201  * inb - read byte from I/O port or something
202  * @port:  address in I/O space
203  *
204  * Operates on "I/O bus I/O space"
205  */
206 static inline u8 inb(unsigned long port)
207 {
208 	return readb(_IO_BASE + (port & IO_SPACE_LIMIT));
209 }
210 
211 static inline u16 inw(unsigned long port)
212 {
213 	return readw(_IO_BASE + (port & IO_SPACE_LIMIT));
214 }
215 
216 static inline u32 inl(unsigned long port)
217 {
218 	return readl(_IO_BASE + (port & IO_SPACE_LIMIT));
219 }
220 
221 /*
222  * outb - write a byte to a memory location
223  * @data: data to write to
224  * @addr:  address in I/O space
225  */
226 static inline void outb(u8 data, unsigned long port)
227 {
228 	writeb(data, _IO_BASE + (port & IO_SPACE_LIMIT));
229 }
230 
231 static inline void outw(u16 data, unsigned long port)
232 {
233 	writew(data, _IO_BASE + (port & IO_SPACE_LIMIT));
234 }
235 
236 static inline void outl(u32 data, unsigned long port)
237 {
238 	writel(data, _IO_BASE + (port & IO_SPACE_LIMIT));
239 }
240 
241 #define outb_p outb
242 #define outw_p outw
243 #define outl_p outl
244 
245 #define inb_p inb
246 #define inw_p inw
247 #define inl_p inl
248 
249 static inline void insb(unsigned long port, void *buffer, int count)
250 {
251 	if (count) {
252 		u8 *buf = buffer;
253 		do {
254 			u8 x = inb(port);
255 			*buf++ = x;
256 		} while (--count);
257 	}
258 }
259 
260 static inline void insw(unsigned long port, void *buffer, int count)
261 {
262 	if (count) {
263 		u16 *buf = buffer;
264 		do {
265 			u16 x = inw(port);
266 			*buf++ = x;
267 		} while (--count);
268 	}
269 }
270 
271 static inline void insl(unsigned long port, void *buffer, int count)
272 {
273 	if (count) {
274 		u32 *buf = buffer;
275 		do {
276 			u32 x = inw(port);
277 			*buf++ = x;
278 		} while (--count);
279 	}
280 }
281 
282 static inline void outsb(unsigned long port, const void *buffer, int count)
283 {
284 	if (count) {
285 		const u8 *buf = buffer;
286 		do {
287 			outb(*buf++, port);
288 		} while (--count);
289 	}
290 }
291 
292 static inline void outsw(unsigned long port, const void *buffer, int count)
293 {
294 	if (count) {
295 		const u16 *buf = buffer;
296 		do {
297 			outw(*buf++, port);
298 		} while (--count);
299 	}
300 }
301 
302 static inline void outsl(unsigned long port, const void *buffer, int count)
303 {
304 	if (count) {
305 		const u32 *buf = buffer;
306 		do {
307 			outl(*buf++, port);
308 		} while (--count);
309 	}
310 }
311 
312 #endif /* __KERNEL__ */
313 
314 #endif
315