1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Debug and Guest Debug support 4 * 5 * Copyright (C) 2015 - Linaro Ltd 6 * Author: Alex Bennée <alex.bennee@linaro.org> 7 */ 8 9 #include <linux/kvm_host.h> 10 #include <linux/hw_breakpoint.h> 11 12 #include <asm/debug-monitors.h> 13 #include <asm/kvm_asm.h> 14 #include <asm/kvm_arm.h> 15 #include <asm/kvm_emulate.h> 16 17 #include "trace.h" 18 19 /* These are the bits of MDSCR_EL1 we may manipulate */ 20 #define MDSCR_EL1_DEBUG_MASK (DBG_MDSCR_SS | \ 21 DBG_MDSCR_KDE | \ 22 DBG_MDSCR_MDE) 23 24 static DEFINE_PER_CPU(u64, mdcr_el2); 25 26 /** 27 * save/restore_guest_debug_regs 28 * 29 * For some debug operations we need to tweak some guest registers. As 30 * a result we need to save the state of those registers before we 31 * make those modifications. 32 * 33 * Guest access to MDSCR_EL1 is trapped by the hypervisor and handled 34 * after we have restored the preserved value to the main context. 35 * 36 * When single-step is enabled by userspace, we tweak PSTATE.SS on every 37 * guest entry. Preserve PSTATE.SS so we can restore the original value 38 * for the vcpu after the single-step is disabled. 39 */ 40 static void save_guest_debug_regs(struct kvm_vcpu *vcpu) 41 { 42 u64 val = vcpu_read_sys_reg(vcpu, MDSCR_EL1); 43 44 vcpu->arch.guest_debug_preserved.mdscr_el1 = val; 45 46 trace_kvm_arm_set_dreg32("Saved MDSCR_EL1", 47 vcpu->arch.guest_debug_preserved.mdscr_el1); 48 49 vcpu->arch.guest_debug_preserved.pstate_ss = 50 (*vcpu_cpsr(vcpu) & DBG_SPSR_SS); 51 } 52 53 static void restore_guest_debug_regs(struct kvm_vcpu *vcpu) 54 { 55 u64 val = vcpu->arch.guest_debug_preserved.mdscr_el1; 56 57 vcpu_write_sys_reg(vcpu, val, MDSCR_EL1); 58 59 trace_kvm_arm_set_dreg32("Restored MDSCR_EL1", 60 vcpu_read_sys_reg(vcpu, MDSCR_EL1)); 61 62 if (vcpu->arch.guest_debug_preserved.pstate_ss) 63 *vcpu_cpsr(vcpu) |= DBG_SPSR_SS; 64 else 65 *vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS; 66 } 67 68 /** 69 * kvm_arm_init_debug - grab what we need for debug 70 * 71 * Currently the sole task of this function is to retrieve the initial 72 * value of mdcr_el2 so we can preserve MDCR_EL2.HPMN which has 73 * presumably been set-up by some knowledgeable bootcode. 74 * 75 * It is called once per-cpu during CPU hyp initialisation. 76 */ 77 78 void kvm_arm_init_debug(void) 79 { 80 __this_cpu_write(mdcr_el2, kvm_call_hyp_ret(__kvm_get_mdcr_el2)); 81 } 82 83 /** 84 * kvm_arm_setup_mdcr_el2 - configure vcpu mdcr_el2 value 85 * 86 * @vcpu: the vcpu pointer 87 * 88 * This ensures we will trap access to: 89 * - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR) 90 * - Debug ROM Address (MDCR_EL2_TDRA) 91 * - OS related registers (MDCR_EL2_TDOSA) 92 * - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB) 93 * - Self-hosted Trace Filter controls (MDCR_EL2_TTRF) 94 * - Self-hosted Trace (MDCR_EL2_TTRF/MDCR_EL2_E2TB) 95 */ 96 static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu) 97 { 98 /* 99 * This also clears MDCR_EL2_E2PB_MASK and MDCR_EL2_E2TB_MASK 100 * to disable guest access to the profiling and trace buffers 101 */ 102 vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK; 103 vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM | 104 MDCR_EL2_TPMS | 105 MDCR_EL2_TTRF | 106 MDCR_EL2_TPMCR | 107 MDCR_EL2_TDRA | 108 MDCR_EL2_TDOSA); 109 110 /* Is the VM being debugged by userspace? */ 111 if (vcpu->guest_debug) 112 /* Route all software debug exceptions to EL2 */ 113 vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE; 114 115 /* 116 * Trap debug register access when one of the following is true: 117 * - Userspace is using the hardware to debug the guest 118 * (KVM_GUESTDBG_USE_HW is set). 119 * - The guest is not using debug (DEBUG_DIRTY clear). 120 * - The guest has enabled the OS Lock (debug exceptions are blocked). 121 */ 122 if ((vcpu->guest_debug & KVM_GUESTDBG_USE_HW) || 123 !vcpu_get_flag(vcpu, DEBUG_DIRTY) || 124 kvm_vcpu_os_lock_enabled(vcpu)) 125 vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA; 126 127 trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2); 128 } 129 130 /** 131 * kvm_arm_vcpu_init_debug - setup vcpu debug traps 132 * 133 * @vcpu: the vcpu pointer 134 * 135 * Set vcpu initial mdcr_el2 value. 136 */ 137 void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu) 138 { 139 preempt_disable(); 140 kvm_arm_setup_mdcr_el2(vcpu); 141 preempt_enable(); 142 } 143 144 /** 145 * kvm_arm_reset_debug_ptr - reset the debug ptr to point to the vcpu state 146 */ 147 148 void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) 149 { 150 vcpu->arch.debug_ptr = &vcpu->arch.vcpu_debug_state; 151 } 152 153 /** 154 * kvm_arm_setup_debug - set up debug related stuff 155 * 156 * @vcpu: the vcpu pointer 157 * 158 * This is called before each entry into the hypervisor to setup any 159 * debug related registers. 160 * 161 * Additionally, KVM only traps guest accesses to the debug registers if 162 * the guest is not actively using them (see the DEBUG_DIRTY 163 * flag on vcpu->arch.iflags). Since the guest must not interfere 164 * with the hardware state when debugging the guest, we must ensure that 165 * trapping is enabled whenever we are debugging the guest using the 166 * debug registers. 167 */ 168 169 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) 170 { 171 unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2; 172 173 trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug); 174 175 kvm_arm_setup_mdcr_el2(vcpu); 176 177 /* Check if we need to use the debug registers. */ 178 if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) { 179 /* Save guest debug state */ 180 save_guest_debug_regs(vcpu); 181 182 /* 183 * Single Step (ARM ARM D2.12.3 The software step state 184 * machine) 185 * 186 * If we are doing Single Step we need to manipulate 187 * the guest's MDSCR_EL1.SS and PSTATE.SS. Once the 188 * step has occurred the hypervisor will trap the 189 * debug exception and we return to userspace. 190 * 191 * If the guest attempts to single step its userspace 192 * we would have to deal with a trapped exception 193 * while in the guest kernel. Because this would be 194 * hard to unwind we suppress the guest's ability to 195 * do so by masking MDSCR_EL.SS. 196 * 197 * This confuses guest debuggers which use 198 * single-step behind the scenes but everything 199 * returns to normal once the host is no longer 200 * debugging the system. 201 */ 202 if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) { 203 /* 204 * If the software step state at the last guest exit 205 * was Active-pending, we don't set DBG_SPSR_SS so 206 * that the state is maintained (to not run another 207 * single-step until the pending Software Step 208 * exception is taken). 209 */ 210 if (!vcpu_get_flag(vcpu, DBG_SS_ACTIVE_PENDING)) 211 *vcpu_cpsr(vcpu) |= DBG_SPSR_SS; 212 else 213 *vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS; 214 215 mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1); 216 mdscr |= DBG_MDSCR_SS; 217 vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1); 218 } else { 219 mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1); 220 mdscr &= ~DBG_MDSCR_SS; 221 vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1); 222 } 223 224 trace_kvm_arm_set_dreg32("SPSR_EL2", *vcpu_cpsr(vcpu)); 225 226 /* 227 * HW Breakpoints and watchpoints 228 * 229 * We simply switch the debug_ptr to point to our new 230 * external_debug_state which has been populated by the 231 * debug ioctl. The existing DEBUG_DIRTY mechanism ensures 232 * the registers are updated on the world switch. 233 */ 234 if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) { 235 /* Enable breakpoints/watchpoints */ 236 mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1); 237 mdscr |= DBG_MDSCR_MDE; 238 vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1); 239 240 vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state; 241 vcpu_set_flag(vcpu, DEBUG_DIRTY); 242 243 trace_kvm_arm_set_regset("BKPTS", get_num_brps(), 244 &vcpu->arch.debug_ptr->dbg_bcr[0], 245 &vcpu->arch.debug_ptr->dbg_bvr[0]); 246 247 trace_kvm_arm_set_regset("WAPTS", get_num_wrps(), 248 &vcpu->arch.debug_ptr->dbg_wcr[0], 249 &vcpu->arch.debug_ptr->dbg_wvr[0]); 250 251 /* 252 * The OS Lock blocks debug exceptions in all ELs when it is 253 * enabled. If the guest has enabled the OS Lock, constrain its 254 * effects to the guest. Emulate the behavior by clearing 255 * MDSCR_EL1.MDE. In so doing, we ensure that host debug 256 * exceptions are unaffected by guest configuration of the OS 257 * Lock. 258 */ 259 } else if (kvm_vcpu_os_lock_enabled(vcpu)) { 260 mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1); 261 mdscr &= ~DBG_MDSCR_MDE; 262 vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1); 263 } 264 } 265 266 BUG_ON(!vcpu->guest_debug && 267 vcpu->arch.debug_ptr != &vcpu->arch.vcpu_debug_state); 268 269 /* If KDE or MDE are set, perform a full save/restore cycle. */ 270 if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE)) 271 vcpu_set_flag(vcpu, DEBUG_DIRTY); 272 273 /* Write mdcr_el2 changes since vcpu_load on VHE systems */ 274 if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2) 275 write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2); 276 277 trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1)); 278 } 279 280 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) 281 { 282 trace_kvm_arm_clear_debug(vcpu->guest_debug); 283 284 /* 285 * Restore the guest's debug registers if we were using them. 286 */ 287 if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) { 288 if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) { 289 if (!(*vcpu_cpsr(vcpu) & DBG_SPSR_SS)) 290 /* 291 * Mark the vcpu as ACTIVE_PENDING 292 * until Software Step exception is taken. 293 */ 294 vcpu_set_flag(vcpu, DBG_SS_ACTIVE_PENDING); 295 } 296 297 restore_guest_debug_regs(vcpu); 298 299 /* 300 * If we were using HW debug we need to restore the 301 * debug_ptr to the guest debug state. 302 */ 303 if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) { 304 kvm_arm_reset_debug_ptr(vcpu); 305 306 trace_kvm_arm_set_regset("BKPTS", get_num_brps(), 307 &vcpu->arch.debug_ptr->dbg_bcr[0], 308 &vcpu->arch.debug_ptr->dbg_bvr[0]); 309 310 trace_kvm_arm_set_regset("WAPTS", get_num_wrps(), 311 &vcpu->arch.debug_ptr->dbg_wcr[0], 312 &vcpu->arch.debug_ptr->dbg_wvr[0]); 313 } 314 } 315 } 316 317 void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu) 318 { 319 u64 dfr0; 320 321 /* For VHE, there is nothing to do */ 322 if (has_vhe()) 323 return; 324 325 dfr0 = read_sysreg(id_aa64dfr0_el1); 326 /* 327 * If SPE is present on this CPU and is available at current EL, 328 * we may need to check if the host state needs to be saved. 329 */ 330 if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) && 331 !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(PMBIDR_EL1_P_SHIFT))) 332 vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE); 333 334 /* Check if we have TRBE implemented and available at the host */ 335 if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) && 336 !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_PROG)) 337 vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE); 338 } 339 340 void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu) 341 { 342 vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE); 343 vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE); 344 } 345