1 /* 2 * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility, 3 * using the CPU's debug registers. 4 * 5 * Copyright (C) 2012 ARM Limited 6 * Author: Will Deacon <will.deacon@arm.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program. If not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #define pr_fmt(fmt) "hw-breakpoint: " fmt 22 23 #include <linux/compat.h> 24 #include <linux/cpu_pm.h> 25 #include <linux/errno.h> 26 #include <linux/hw_breakpoint.h> 27 #include <linux/perf_event.h> 28 #include <linux/ptrace.h> 29 #include <linux/smp.h> 30 31 #include <asm/current.h> 32 #include <asm/debug-monitors.h> 33 #include <asm/hw_breakpoint.h> 34 #include <asm/kdebug.h> 35 #include <asm/traps.h> 36 #include <asm/cputype.h> 37 #include <asm/system_misc.h> 38 39 /* Breakpoint currently in use for each BRP. */ 40 static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]); 41 42 /* Watchpoint currently in use for each WRP. */ 43 static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); 44 45 /* Currently stepping a per-CPU kernel breakpoint. */ 46 static DEFINE_PER_CPU(int, stepping_kernel_bp); 47 48 /* Number of BRP/WRP registers on this CPU. */ 49 static int core_num_brps; 50 static int core_num_wrps; 51 52 /* Determine number of BRP registers available. */ 53 static int get_num_brps(void) 54 { 55 return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1; 56 } 57 58 /* Determine number of WRP registers available. */ 59 static int get_num_wrps(void) 60 { 61 return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1; 62 } 63 64 int hw_breakpoint_slots(int type) 65 { 66 /* 67 * We can be called early, so don't rely on 68 * our static variables being initialised. 69 */ 70 switch (type) { 71 case TYPE_INST: 72 return get_num_brps(); 73 case TYPE_DATA: 74 return get_num_wrps(); 75 default: 76 pr_warning("unknown slot type: %d\n", type); 77 return 0; 78 } 79 } 80 81 #define READ_WB_REG_CASE(OFF, N, REG, VAL) \ 82 case (OFF + N): \ 83 AARCH64_DBG_READ(N, REG, VAL); \ 84 break 85 86 #define WRITE_WB_REG_CASE(OFF, N, REG, VAL) \ 87 case (OFF + N): \ 88 AARCH64_DBG_WRITE(N, REG, VAL); \ 89 break 90 91 #define GEN_READ_WB_REG_CASES(OFF, REG, VAL) \ 92 READ_WB_REG_CASE(OFF, 0, REG, VAL); \ 93 READ_WB_REG_CASE(OFF, 1, REG, VAL); \ 94 READ_WB_REG_CASE(OFF, 2, REG, VAL); \ 95 READ_WB_REG_CASE(OFF, 3, REG, VAL); \ 96 READ_WB_REG_CASE(OFF, 4, REG, VAL); \ 97 READ_WB_REG_CASE(OFF, 5, REG, VAL); \ 98 READ_WB_REG_CASE(OFF, 6, REG, VAL); \ 99 READ_WB_REG_CASE(OFF, 7, REG, VAL); \ 100 READ_WB_REG_CASE(OFF, 8, REG, VAL); \ 101 READ_WB_REG_CASE(OFF, 9, REG, VAL); \ 102 READ_WB_REG_CASE(OFF, 10, REG, VAL); \ 103 READ_WB_REG_CASE(OFF, 11, REG, VAL); \ 104 READ_WB_REG_CASE(OFF, 12, REG, VAL); \ 105 READ_WB_REG_CASE(OFF, 13, REG, VAL); \ 106 READ_WB_REG_CASE(OFF, 14, REG, VAL); \ 107 READ_WB_REG_CASE(OFF, 15, REG, VAL) 108 109 #define GEN_WRITE_WB_REG_CASES(OFF, REG, VAL) \ 110 WRITE_WB_REG_CASE(OFF, 0, REG, VAL); \ 111 WRITE_WB_REG_CASE(OFF, 1, REG, VAL); \ 112 WRITE_WB_REG_CASE(OFF, 2, REG, VAL); \ 113 WRITE_WB_REG_CASE(OFF, 3, REG, VAL); \ 114 WRITE_WB_REG_CASE(OFF, 4, REG, VAL); \ 115 WRITE_WB_REG_CASE(OFF, 5, REG, VAL); \ 116 WRITE_WB_REG_CASE(OFF, 6, REG, VAL); \ 117 WRITE_WB_REG_CASE(OFF, 7, REG, VAL); \ 118 WRITE_WB_REG_CASE(OFF, 8, REG, VAL); \ 119 WRITE_WB_REG_CASE(OFF, 9, REG, VAL); \ 120 WRITE_WB_REG_CASE(OFF, 10, REG, VAL); \ 121 WRITE_WB_REG_CASE(OFF, 11, REG, VAL); \ 122 WRITE_WB_REG_CASE(OFF, 12, REG, VAL); \ 123 WRITE_WB_REG_CASE(OFF, 13, REG, VAL); \ 124 WRITE_WB_REG_CASE(OFF, 14, REG, VAL); \ 125 WRITE_WB_REG_CASE(OFF, 15, REG, VAL) 126 127 static u64 read_wb_reg(int reg, int n) 128 { 129 u64 val = 0; 130 131 switch (reg + n) { 132 GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val); 133 GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val); 134 GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val); 135 GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val); 136 default: 137 pr_warning("attempt to read from unknown breakpoint register %d\n", n); 138 } 139 140 return val; 141 } 142 143 static void write_wb_reg(int reg, int n, u64 val) 144 { 145 switch (reg + n) { 146 GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val); 147 GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val); 148 GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val); 149 GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val); 150 default: 151 pr_warning("attempt to write to unknown breakpoint register %d\n", n); 152 } 153 isb(); 154 } 155 156 /* 157 * Convert a breakpoint privilege level to the corresponding exception 158 * level. 159 */ 160 static enum debug_el debug_exception_level(int privilege) 161 { 162 switch (privilege) { 163 case AARCH64_BREAKPOINT_EL0: 164 return DBG_ACTIVE_EL0; 165 case AARCH64_BREAKPOINT_EL1: 166 return DBG_ACTIVE_EL1; 167 default: 168 pr_warning("invalid breakpoint privilege level %d\n", privilege); 169 return -EINVAL; 170 } 171 } 172 173 enum hw_breakpoint_ops { 174 HW_BREAKPOINT_INSTALL, 175 HW_BREAKPOINT_UNINSTALL, 176 HW_BREAKPOINT_RESTORE 177 }; 178 179 /** 180 * hw_breakpoint_slot_setup - Find and setup a perf slot according to 181 * operations 182 * 183 * @slots: pointer to array of slots 184 * @max_slots: max number of slots 185 * @bp: perf_event to setup 186 * @ops: operation to be carried out on the slot 187 * 188 * Return: 189 * slot index on success 190 * -ENOSPC if no slot is available/matches 191 * -EINVAL on wrong operations parameter 192 */ 193 static int hw_breakpoint_slot_setup(struct perf_event **slots, int max_slots, 194 struct perf_event *bp, 195 enum hw_breakpoint_ops ops) 196 { 197 int i; 198 struct perf_event **slot; 199 200 for (i = 0; i < max_slots; ++i) { 201 slot = &slots[i]; 202 switch (ops) { 203 case HW_BREAKPOINT_INSTALL: 204 if (!*slot) { 205 *slot = bp; 206 return i; 207 } 208 break; 209 case HW_BREAKPOINT_UNINSTALL: 210 if (*slot == bp) { 211 *slot = NULL; 212 return i; 213 } 214 break; 215 case HW_BREAKPOINT_RESTORE: 216 if (*slot == bp) 217 return i; 218 break; 219 default: 220 pr_warn_once("Unhandled hw breakpoint ops %d\n", ops); 221 return -EINVAL; 222 } 223 } 224 return -ENOSPC; 225 } 226 227 static int hw_breakpoint_control(struct perf_event *bp, 228 enum hw_breakpoint_ops ops) 229 { 230 struct arch_hw_breakpoint *info = counter_arch_bp(bp); 231 struct perf_event **slots; 232 struct debug_info *debug_info = ¤t->thread.debug; 233 int i, max_slots, ctrl_reg, val_reg, reg_enable; 234 enum debug_el dbg_el = debug_exception_level(info->ctrl.privilege); 235 u32 ctrl; 236 237 if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { 238 /* Breakpoint */ 239 ctrl_reg = AARCH64_DBG_REG_BCR; 240 val_reg = AARCH64_DBG_REG_BVR; 241 slots = this_cpu_ptr(bp_on_reg); 242 max_slots = core_num_brps; 243 reg_enable = !debug_info->bps_disabled; 244 } else { 245 /* Watchpoint */ 246 ctrl_reg = AARCH64_DBG_REG_WCR; 247 val_reg = AARCH64_DBG_REG_WVR; 248 slots = this_cpu_ptr(wp_on_reg); 249 max_slots = core_num_wrps; 250 reg_enable = !debug_info->wps_disabled; 251 } 252 253 i = hw_breakpoint_slot_setup(slots, max_slots, bp, ops); 254 255 if (WARN_ONCE(i < 0, "Can't find any breakpoint slot")) 256 return i; 257 258 switch (ops) { 259 case HW_BREAKPOINT_INSTALL: 260 /* 261 * Ensure debug monitors are enabled at the correct exception 262 * level. 263 */ 264 enable_debug_monitors(dbg_el); 265 /* Fall through */ 266 case HW_BREAKPOINT_RESTORE: 267 /* Setup the address register. */ 268 write_wb_reg(val_reg, i, info->address); 269 270 /* Setup the control register. */ 271 ctrl = encode_ctrl_reg(info->ctrl); 272 write_wb_reg(ctrl_reg, i, 273 reg_enable ? ctrl | 0x1 : ctrl & ~0x1); 274 break; 275 case HW_BREAKPOINT_UNINSTALL: 276 /* Reset the control register. */ 277 write_wb_reg(ctrl_reg, i, 0); 278 279 /* 280 * Release the debug monitors for the correct exception 281 * level. 282 */ 283 disable_debug_monitors(dbg_el); 284 break; 285 } 286 287 return 0; 288 } 289 290 /* 291 * Install a perf counter breakpoint. 292 */ 293 int arch_install_hw_breakpoint(struct perf_event *bp) 294 { 295 return hw_breakpoint_control(bp, HW_BREAKPOINT_INSTALL); 296 } 297 298 void arch_uninstall_hw_breakpoint(struct perf_event *bp) 299 { 300 hw_breakpoint_control(bp, HW_BREAKPOINT_UNINSTALL); 301 } 302 303 static int get_hbp_len(u8 hbp_len) 304 { 305 unsigned int len_in_bytes = 0; 306 307 switch (hbp_len) { 308 case ARM_BREAKPOINT_LEN_1: 309 len_in_bytes = 1; 310 break; 311 case ARM_BREAKPOINT_LEN_2: 312 len_in_bytes = 2; 313 break; 314 case ARM_BREAKPOINT_LEN_4: 315 len_in_bytes = 4; 316 break; 317 case ARM_BREAKPOINT_LEN_8: 318 len_in_bytes = 8; 319 break; 320 } 321 322 return len_in_bytes; 323 } 324 325 /* 326 * Check whether bp virtual address is in kernel space. 327 */ 328 int arch_check_bp_in_kernelspace(struct perf_event *bp) 329 { 330 unsigned int len; 331 unsigned long va; 332 struct arch_hw_breakpoint *info = counter_arch_bp(bp); 333 334 va = info->address; 335 len = get_hbp_len(info->ctrl.len); 336 337 return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE); 338 } 339 340 /* 341 * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl. 342 * Hopefully this will disappear when ptrace can bypass the conversion 343 * to generic breakpoint descriptions. 344 */ 345 int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl, 346 int *gen_len, int *gen_type) 347 { 348 /* Type */ 349 switch (ctrl.type) { 350 case ARM_BREAKPOINT_EXECUTE: 351 *gen_type = HW_BREAKPOINT_X; 352 break; 353 case ARM_BREAKPOINT_LOAD: 354 *gen_type = HW_BREAKPOINT_R; 355 break; 356 case ARM_BREAKPOINT_STORE: 357 *gen_type = HW_BREAKPOINT_W; 358 break; 359 case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE: 360 *gen_type = HW_BREAKPOINT_RW; 361 break; 362 default: 363 return -EINVAL; 364 } 365 366 /* Len */ 367 switch (ctrl.len) { 368 case ARM_BREAKPOINT_LEN_1: 369 *gen_len = HW_BREAKPOINT_LEN_1; 370 break; 371 case ARM_BREAKPOINT_LEN_2: 372 *gen_len = HW_BREAKPOINT_LEN_2; 373 break; 374 case ARM_BREAKPOINT_LEN_4: 375 *gen_len = HW_BREAKPOINT_LEN_4; 376 break; 377 case ARM_BREAKPOINT_LEN_8: 378 *gen_len = HW_BREAKPOINT_LEN_8; 379 break; 380 default: 381 return -EINVAL; 382 } 383 384 return 0; 385 } 386 387 /* 388 * Construct an arch_hw_breakpoint from a perf_event. 389 */ 390 static int arch_build_bp_info(struct perf_event *bp) 391 { 392 struct arch_hw_breakpoint *info = counter_arch_bp(bp); 393 394 /* Type */ 395 switch (bp->attr.bp_type) { 396 case HW_BREAKPOINT_X: 397 info->ctrl.type = ARM_BREAKPOINT_EXECUTE; 398 break; 399 case HW_BREAKPOINT_R: 400 info->ctrl.type = ARM_BREAKPOINT_LOAD; 401 break; 402 case HW_BREAKPOINT_W: 403 info->ctrl.type = ARM_BREAKPOINT_STORE; 404 break; 405 case HW_BREAKPOINT_RW: 406 info->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE; 407 break; 408 default: 409 return -EINVAL; 410 } 411 412 /* Len */ 413 switch (bp->attr.bp_len) { 414 case HW_BREAKPOINT_LEN_1: 415 info->ctrl.len = ARM_BREAKPOINT_LEN_1; 416 break; 417 case HW_BREAKPOINT_LEN_2: 418 info->ctrl.len = ARM_BREAKPOINT_LEN_2; 419 break; 420 case HW_BREAKPOINT_LEN_4: 421 info->ctrl.len = ARM_BREAKPOINT_LEN_4; 422 break; 423 case HW_BREAKPOINT_LEN_8: 424 info->ctrl.len = ARM_BREAKPOINT_LEN_8; 425 break; 426 default: 427 return -EINVAL; 428 } 429 430 /* 431 * On AArch64, we only permit breakpoints of length 4, whereas 432 * AArch32 also requires breakpoints of length 2 for Thumb. 433 * Watchpoints can be of length 1, 2, 4 or 8 bytes. 434 */ 435 if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { 436 if (is_compat_task()) { 437 if (info->ctrl.len != ARM_BREAKPOINT_LEN_2 && 438 info->ctrl.len != ARM_BREAKPOINT_LEN_4) 439 return -EINVAL; 440 } else if (info->ctrl.len != ARM_BREAKPOINT_LEN_4) { 441 /* 442 * FIXME: Some tools (I'm looking at you perf) assume 443 * that breakpoints should be sizeof(long). This 444 * is nonsense. For now, we fix up the parameter 445 * but we should probably return -EINVAL instead. 446 */ 447 info->ctrl.len = ARM_BREAKPOINT_LEN_4; 448 } 449 } 450 451 /* Address */ 452 info->address = bp->attr.bp_addr; 453 454 /* 455 * Privilege 456 * Note that we disallow combined EL0/EL1 breakpoints because 457 * that would complicate the stepping code. 458 */ 459 if (arch_check_bp_in_kernelspace(bp)) 460 info->ctrl.privilege = AARCH64_BREAKPOINT_EL1; 461 else 462 info->ctrl.privilege = AARCH64_BREAKPOINT_EL0; 463 464 /* Enabled? */ 465 info->ctrl.enabled = !bp->attr.disabled; 466 467 return 0; 468 } 469 470 /* 471 * Validate the arch-specific HW Breakpoint register settings. 472 */ 473 int arch_validate_hwbkpt_settings(struct perf_event *bp) 474 { 475 struct arch_hw_breakpoint *info = counter_arch_bp(bp); 476 int ret; 477 u64 alignment_mask, offset; 478 479 /* Build the arch_hw_breakpoint. */ 480 ret = arch_build_bp_info(bp); 481 if (ret) 482 return ret; 483 484 /* 485 * Check address alignment. 486 * We don't do any clever alignment correction for watchpoints 487 * because using 64-bit unaligned addresses is deprecated for 488 * AArch64. 489 * 490 * AArch32 tasks expect some simple alignment fixups, so emulate 491 * that here. 492 */ 493 if (is_compat_task()) { 494 if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) 495 alignment_mask = 0x7; 496 else 497 alignment_mask = 0x3; 498 offset = info->address & alignment_mask; 499 switch (offset) { 500 case 0: 501 /* Aligned */ 502 break; 503 case 1: 504 /* Allow single byte watchpoint. */ 505 if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) 506 break; 507 case 2: 508 /* Allow halfword watchpoints and breakpoints. */ 509 if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) 510 break; 511 default: 512 return -EINVAL; 513 } 514 515 info->address &= ~alignment_mask; 516 info->ctrl.len <<= offset; 517 } else { 518 if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) 519 alignment_mask = 0x3; 520 else 521 alignment_mask = 0x7; 522 if (info->address & alignment_mask) 523 return -EINVAL; 524 } 525 526 /* 527 * Disallow per-task kernel breakpoints since these would 528 * complicate the stepping code. 529 */ 530 if (info->ctrl.privilege == AARCH64_BREAKPOINT_EL1 && bp->hw.bp_target) 531 return -EINVAL; 532 533 return 0; 534 } 535 536 /* 537 * Enable/disable all of the breakpoints active at the specified 538 * exception level at the register level. 539 * This is used when single-stepping after a breakpoint exception. 540 */ 541 static void toggle_bp_registers(int reg, enum debug_el el, int enable) 542 { 543 int i, max_slots, privilege; 544 u32 ctrl; 545 struct perf_event **slots; 546 547 switch (reg) { 548 case AARCH64_DBG_REG_BCR: 549 slots = this_cpu_ptr(bp_on_reg); 550 max_slots = core_num_brps; 551 break; 552 case AARCH64_DBG_REG_WCR: 553 slots = this_cpu_ptr(wp_on_reg); 554 max_slots = core_num_wrps; 555 break; 556 default: 557 return; 558 } 559 560 for (i = 0; i < max_slots; ++i) { 561 if (!slots[i]) 562 continue; 563 564 privilege = counter_arch_bp(slots[i])->ctrl.privilege; 565 if (debug_exception_level(privilege) != el) 566 continue; 567 568 ctrl = read_wb_reg(reg, i); 569 if (enable) 570 ctrl |= 0x1; 571 else 572 ctrl &= ~0x1; 573 write_wb_reg(reg, i, ctrl); 574 } 575 } 576 577 /* 578 * Debug exception handlers. 579 */ 580 static int breakpoint_handler(unsigned long unused, unsigned int esr, 581 struct pt_regs *regs) 582 { 583 int i, step = 0, *kernel_step; 584 u32 ctrl_reg; 585 u64 addr, val; 586 struct perf_event *bp, **slots; 587 struct debug_info *debug_info; 588 struct arch_hw_breakpoint_ctrl ctrl; 589 590 slots = this_cpu_ptr(bp_on_reg); 591 addr = instruction_pointer(regs); 592 debug_info = ¤t->thread.debug; 593 594 for (i = 0; i < core_num_brps; ++i) { 595 rcu_read_lock(); 596 597 bp = slots[i]; 598 599 if (bp == NULL) 600 goto unlock; 601 602 /* Check if the breakpoint value matches. */ 603 val = read_wb_reg(AARCH64_DBG_REG_BVR, i); 604 if (val != (addr & ~0x3)) 605 goto unlock; 606 607 /* Possible match, check the byte address select to confirm. */ 608 ctrl_reg = read_wb_reg(AARCH64_DBG_REG_BCR, i); 609 decode_ctrl_reg(ctrl_reg, &ctrl); 610 if (!((1 << (addr & 0x3)) & ctrl.len)) 611 goto unlock; 612 613 counter_arch_bp(bp)->trigger = addr; 614 perf_bp_event(bp, regs); 615 616 /* Do we need to handle the stepping? */ 617 if (!bp->overflow_handler) 618 step = 1; 619 unlock: 620 rcu_read_unlock(); 621 } 622 623 if (!step) 624 return 0; 625 626 if (user_mode(regs)) { 627 debug_info->bps_disabled = 1; 628 toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 0); 629 630 /* If we're already stepping a watchpoint, just return. */ 631 if (debug_info->wps_disabled) 632 return 0; 633 634 if (test_thread_flag(TIF_SINGLESTEP)) 635 debug_info->suspended_step = 1; 636 else 637 user_enable_single_step(current); 638 } else { 639 toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 0); 640 kernel_step = this_cpu_ptr(&stepping_kernel_bp); 641 642 if (*kernel_step != ARM_KERNEL_STEP_NONE) 643 return 0; 644 645 if (kernel_active_single_step()) { 646 *kernel_step = ARM_KERNEL_STEP_SUSPEND; 647 } else { 648 *kernel_step = ARM_KERNEL_STEP_ACTIVE; 649 kernel_enable_single_step(regs); 650 } 651 } 652 653 return 0; 654 } 655 656 static int watchpoint_handler(unsigned long addr, unsigned int esr, 657 struct pt_regs *regs) 658 { 659 int i, step = 0, *kernel_step, access; 660 u32 ctrl_reg; 661 u64 val, alignment_mask; 662 struct perf_event *wp, **slots; 663 struct debug_info *debug_info; 664 struct arch_hw_breakpoint *info; 665 struct arch_hw_breakpoint_ctrl ctrl; 666 667 slots = this_cpu_ptr(wp_on_reg); 668 debug_info = ¤t->thread.debug; 669 670 for (i = 0; i < core_num_wrps; ++i) { 671 rcu_read_lock(); 672 673 wp = slots[i]; 674 675 if (wp == NULL) 676 goto unlock; 677 678 info = counter_arch_bp(wp); 679 /* AArch32 watchpoints are either 4 or 8 bytes aligned. */ 680 if (is_compat_task()) { 681 if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) 682 alignment_mask = 0x7; 683 else 684 alignment_mask = 0x3; 685 } else { 686 alignment_mask = 0x7; 687 } 688 689 /* Check if the watchpoint value matches. */ 690 val = read_wb_reg(AARCH64_DBG_REG_WVR, i); 691 if (val != (addr & ~alignment_mask)) 692 goto unlock; 693 694 /* Possible match, check the byte address select to confirm. */ 695 ctrl_reg = read_wb_reg(AARCH64_DBG_REG_WCR, i); 696 decode_ctrl_reg(ctrl_reg, &ctrl); 697 if (!((1 << (addr & alignment_mask)) & ctrl.len)) 698 goto unlock; 699 700 /* 701 * Check that the access type matches. 702 * 0 => load, otherwise => store 703 */ 704 access = (esr & AARCH64_ESR_ACCESS_MASK) ? HW_BREAKPOINT_W : 705 HW_BREAKPOINT_R; 706 if (!(access & hw_breakpoint_type(wp))) 707 goto unlock; 708 709 info->trigger = addr; 710 perf_bp_event(wp, regs); 711 712 /* Do we need to handle the stepping? */ 713 if (!wp->overflow_handler) 714 step = 1; 715 716 unlock: 717 rcu_read_unlock(); 718 } 719 720 if (!step) 721 return 0; 722 723 /* 724 * We always disable EL0 watchpoints because the kernel can 725 * cause these to fire via an unprivileged access. 726 */ 727 toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 0); 728 729 if (user_mode(regs)) { 730 debug_info->wps_disabled = 1; 731 732 /* If we're already stepping a breakpoint, just return. */ 733 if (debug_info->bps_disabled) 734 return 0; 735 736 if (test_thread_flag(TIF_SINGLESTEP)) 737 debug_info->suspended_step = 1; 738 else 739 user_enable_single_step(current); 740 } else { 741 toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 0); 742 kernel_step = this_cpu_ptr(&stepping_kernel_bp); 743 744 if (*kernel_step != ARM_KERNEL_STEP_NONE) 745 return 0; 746 747 if (kernel_active_single_step()) { 748 *kernel_step = ARM_KERNEL_STEP_SUSPEND; 749 } else { 750 *kernel_step = ARM_KERNEL_STEP_ACTIVE; 751 kernel_enable_single_step(regs); 752 } 753 } 754 755 return 0; 756 } 757 758 /* 759 * Handle single-step exception. 760 */ 761 int reinstall_suspended_bps(struct pt_regs *regs) 762 { 763 struct debug_info *debug_info = ¤t->thread.debug; 764 int handled_exception = 0, *kernel_step; 765 766 kernel_step = this_cpu_ptr(&stepping_kernel_bp); 767 768 /* 769 * Called from single-step exception handler. 770 * Return 0 if execution can resume, 1 if a SIGTRAP should be 771 * reported. 772 */ 773 if (user_mode(regs)) { 774 if (debug_info->bps_disabled) { 775 debug_info->bps_disabled = 0; 776 toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 1); 777 handled_exception = 1; 778 } 779 780 if (debug_info->wps_disabled) { 781 debug_info->wps_disabled = 0; 782 toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1); 783 handled_exception = 1; 784 } 785 786 if (handled_exception) { 787 if (debug_info->suspended_step) { 788 debug_info->suspended_step = 0; 789 /* Allow exception handling to fall-through. */ 790 handled_exception = 0; 791 } else { 792 user_disable_single_step(current); 793 } 794 } 795 } else if (*kernel_step != ARM_KERNEL_STEP_NONE) { 796 toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 1); 797 toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 1); 798 799 if (!debug_info->wps_disabled) 800 toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1); 801 802 if (*kernel_step != ARM_KERNEL_STEP_SUSPEND) { 803 kernel_disable_single_step(); 804 handled_exception = 1; 805 } else { 806 handled_exception = 0; 807 } 808 809 *kernel_step = ARM_KERNEL_STEP_NONE; 810 } 811 812 return !handled_exception; 813 } 814 815 /* 816 * Context-switcher for restoring suspended breakpoints. 817 */ 818 void hw_breakpoint_thread_switch(struct task_struct *next) 819 { 820 /* 821 * current next 822 * disabled: 0 0 => The usual case, NOTIFY_DONE 823 * 0 1 => Disable the registers 824 * 1 0 => Enable the registers 825 * 1 1 => NOTIFY_DONE. per-task bps will 826 * get taken care of by perf. 827 */ 828 829 struct debug_info *current_debug_info, *next_debug_info; 830 831 current_debug_info = ¤t->thread.debug; 832 next_debug_info = &next->thread.debug; 833 834 /* Update breakpoints. */ 835 if (current_debug_info->bps_disabled != next_debug_info->bps_disabled) 836 toggle_bp_registers(AARCH64_DBG_REG_BCR, 837 DBG_ACTIVE_EL0, 838 !next_debug_info->bps_disabled); 839 840 /* Update watchpoints. */ 841 if (current_debug_info->wps_disabled != next_debug_info->wps_disabled) 842 toggle_bp_registers(AARCH64_DBG_REG_WCR, 843 DBG_ACTIVE_EL0, 844 !next_debug_info->wps_disabled); 845 } 846 847 /* 848 * CPU initialisation. 849 */ 850 static void hw_breakpoint_reset(void *unused) 851 { 852 int i; 853 struct perf_event **slots; 854 /* 855 * When a CPU goes through cold-boot, it does not have any installed 856 * slot, so it is safe to share the same function for restoring and 857 * resetting breakpoints; when a CPU is hotplugged in, it goes 858 * through the slots, which are all empty, hence it just resets control 859 * and value for debug registers. 860 * When this function is triggered on warm-boot through a CPU PM 861 * notifier some slots might be initialized; if so they are 862 * reprogrammed according to the debug slots content. 863 */ 864 for (slots = this_cpu_ptr(bp_on_reg), i = 0; i < core_num_brps; ++i) { 865 if (slots[i]) { 866 hw_breakpoint_control(slots[i], HW_BREAKPOINT_RESTORE); 867 } else { 868 write_wb_reg(AARCH64_DBG_REG_BCR, i, 0UL); 869 write_wb_reg(AARCH64_DBG_REG_BVR, i, 0UL); 870 } 871 } 872 873 for (slots = this_cpu_ptr(wp_on_reg), i = 0; i < core_num_wrps; ++i) { 874 if (slots[i]) { 875 hw_breakpoint_control(slots[i], HW_BREAKPOINT_RESTORE); 876 } else { 877 write_wb_reg(AARCH64_DBG_REG_WCR, i, 0UL); 878 write_wb_reg(AARCH64_DBG_REG_WVR, i, 0UL); 879 } 880 } 881 } 882 883 static int hw_breakpoint_reset_notify(struct notifier_block *self, 884 unsigned long action, 885 void *hcpu) 886 { 887 int cpu = (long)hcpu; 888 if (action == CPU_ONLINE) 889 smp_call_function_single(cpu, hw_breakpoint_reset, NULL, 1); 890 return NOTIFY_OK; 891 } 892 893 static struct notifier_block hw_breakpoint_reset_nb = { 894 .notifier_call = hw_breakpoint_reset_notify, 895 }; 896 897 #ifdef CONFIG_CPU_PM 898 extern void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)); 899 #else 900 static inline void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)) 901 { 902 } 903 #endif 904 905 /* 906 * One-time initialisation. 907 */ 908 static int __init arch_hw_breakpoint_init(void) 909 { 910 core_num_brps = get_num_brps(); 911 core_num_wrps = get_num_wrps(); 912 913 pr_info("found %d breakpoint and %d watchpoint registers.\n", 914 core_num_brps, core_num_wrps); 915 916 cpu_notifier_register_begin(); 917 918 /* 919 * Reset the breakpoint resources. We assume that a halting 920 * debugger will leave the world in a nice state for us. 921 */ 922 smp_call_function(hw_breakpoint_reset, NULL, 1); 923 hw_breakpoint_reset(NULL); 924 925 /* Register debug fault handlers. */ 926 hook_debug_fault_code(DBG_ESR_EVT_HWBP, breakpoint_handler, SIGTRAP, 927 TRAP_HWBKPT, "hw-breakpoint handler"); 928 hook_debug_fault_code(DBG_ESR_EVT_HWWP, watchpoint_handler, SIGTRAP, 929 TRAP_HWBKPT, "hw-watchpoint handler"); 930 931 /* Register hotplug notifier. */ 932 __register_cpu_notifier(&hw_breakpoint_reset_nb); 933 934 cpu_notifier_register_done(); 935 936 /* Register cpu_suspend hw breakpoint restore hook */ 937 cpu_suspend_set_dbg_restorer(hw_breakpoint_reset); 938 939 return 0; 940 } 941 arch_initcall(arch_hw_breakpoint_init); 942 943 void hw_breakpoint_pmu_read(struct perf_event *bp) 944 { 945 } 946 947 /* 948 * Dummy function to register with die_notifier. 949 */ 950 int hw_breakpoint_exceptions_notify(struct notifier_block *unused, 951 unsigned long val, void *data) 952 { 953 return NOTIFY_DONE; 954 } 955