1/*
2 * Hibernate low-level support
3 *
4 * Copyright (C) 2016 ARM Ltd.
5 * Author:	James Morse <james.morse@arm.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
18 */
19#include <linux/linkage.h>
20#include <linux/errno.h>
21
22#include <asm/asm-offsets.h>
23#include <asm/assembler.h>
24#include <asm/cputype.h>
25#include <asm/memory.h>
26#include <asm/page.h>
27#include <asm/virt.h>
28
29/*
30 * To prevent the possibility of old and new partial table walks being visible
31 * in the tlb, switch the ttbr to a zero page when we invalidate the old
32 * records. D4.7.1 'General TLB maintenance requirements' in ARM DDI 0487A.i
33 * Even switching to our copied tables will cause a changed output address at
34 * each stage of the walk.
35 */
36.macro break_before_make_ttbr_switch zero_page, page_table
37	msr	ttbr1_el1, \zero_page
38	isb
39	tlbi	vmalle1
40	dsb	nsh
41	msr	ttbr1_el1, \page_table
42	isb
43.endm
44
45
46/*
47 * Resume from hibernate
48 *
49 * Loads temporary page tables then restores the memory image.
50 * Finally branches to cpu_resume() to restore the state saved by
51 * swsusp_arch_suspend().
52 *
53 * Because this code has to be copied to a 'safe' page, it can't call out to
54 * other functions by PC-relative address. Also remember that it may be
55 * mid-way through over-writing other functions. For this reason it contains
56 * code from flush_icache_range() and uses the copy_page() macro.
57 *
58 * This 'safe' page is mapped via ttbr0, and executed from there. This function
59 * switches to a copy of the linear map in ttbr1, performs the restore, then
60 * switches ttbr1 to the original kernel's swapper_pg_dir.
61 *
62 * All of memory gets written to, including code. We need to clean the kernel
63 * text to the Point of Coherence (PoC) before secondary cores can be booted.
64 * Because the kernel modules and executable pages mapped to user space are
65 * also written as data, we clean all pages we touch to the Point of
66 * Unification (PoU).
67 *
68 * x0: physical address of temporary page tables
69 * x1: physical address of swapper page tables
70 * x2: address of cpu_resume
71 * x3: linear map address of restore_pblist in the current kernel
72 * x4: physical address of __hyp_stub_vectors, or 0
73 * x5: physical address of a  zero page that remains zero after resume
74 */
75.pushsection    ".hibernate_exit.text", "ax"
76ENTRY(swsusp_arch_suspend_exit)
77	/*
78	 * We execute from ttbr0, change ttbr1 to our copied linear map tables
79	 * with a break-before-make via the zero page
80	 */
81	break_before_make_ttbr_switch	x5, x0
82
83	mov	x21, x1
84	mov	x30, x2
85	mov	x24, x4
86	mov	x25, x5
87
88	/* walk the restore_pblist and use copy_page() to over-write memory */
89	mov	x19, x3
90
911:	ldr	x10, [x19, #HIBERN_PBE_ORIG]
92	mov	x0, x10
93	ldr	x1, [x19, #HIBERN_PBE_ADDR]
94
95	copy_page	x0, x1, x2, x3, x4, x5, x6, x7, x8, x9
96
97	add	x1, x10, #PAGE_SIZE
98	/* Clean the copied page to PoU - based on flush_icache_range() */
99	raw_dcache_line_size x2, x3
100	sub	x3, x2, #1
101	bic	x4, x10, x3
1022:	dc	cvau, x4	/* clean D line / unified line */
103	add	x4, x4, x2
104	cmp	x4, x1
105	b.lo	2b
106
107	ldr	x19, [x19, #HIBERN_PBE_NEXT]
108	cbnz	x19, 1b
109	dsb	ish		/* wait for PoU cleaning to finish */
110
111	/* switch to the restored kernels page tables */
112	break_before_make_ttbr_switch	x25, x21
113
114	ic	ialluis
115	dsb	ish
116	isb
117
118	cbz	x24, 3f		/* Do we need to re-initialise EL2? */
119	hvc	#0
1203:	ret
121
122	.ltorg
123ENDPROC(swsusp_arch_suspend_exit)
124
125/*
126 * Restore the hyp stub.
127 * This must be done before the hibernate page is unmapped by _cpu_resume(),
128 * but happens before any of the hyp-stub's code is cleaned to PoC.
129 *
130 * x24: The physical address of __hyp_stub_vectors
131 */
132el1_sync:
133	msr	vbar_el2, x24
134	eret
135ENDPROC(el1_sync)
136
137.macro invalid_vector	label
138\label:
139	b \label
140ENDPROC(\label)
141.endm
142
143	invalid_vector	el2_sync_invalid
144	invalid_vector	el2_irq_invalid
145	invalid_vector	el2_fiq_invalid
146	invalid_vector	el2_error_invalid
147	invalid_vector	el1_sync_invalid
148	invalid_vector	el1_irq_invalid
149	invalid_vector	el1_fiq_invalid
150	invalid_vector	el1_error_invalid
151
152/* el2 vectors - switch el2 here while we restore the memory image. */
153	.align 11
154ENTRY(hibernate_el2_vectors)
155	ventry	el2_sync_invalid		// Synchronous EL2t
156	ventry	el2_irq_invalid			// IRQ EL2t
157	ventry	el2_fiq_invalid			// FIQ EL2t
158	ventry	el2_error_invalid		// Error EL2t
159
160	ventry	el2_sync_invalid		// Synchronous EL2h
161	ventry	el2_irq_invalid			// IRQ EL2h
162	ventry	el2_fiq_invalid			// FIQ EL2h
163	ventry	el2_error_invalid		// Error EL2h
164
165	ventry	el1_sync			// Synchronous 64-bit EL1
166	ventry	el1_irq_invalid			// IRQ 64-bit EL1
167	ventry	el1_fiq_invalid			// FIQ 64-bit EL1
168	ventry	el1_error_invalid		// Error 64-bit EL1
169
170	ventry	el1_sync_invalid		// Synchronous 32-bit EL1
171	ventry	el1_irq_invalid			// IRQ 32-bit EL1
172	ventry	el1_fiq_invalid			// FIQ 32-bit EL1
173	ventry	el1_error_invalid		// Error 32-bit EL1
174END(hibernate_el2_vectors)
175
176.popsection
177