1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * FP/SIMD context switching and fault handling 4 * 5 * Copyright (C) 2012 ARM Ltd. 6 * Author: Catalin Marinas <catalin.marinas@arm.com> 7 */ 8 9 #include <linux/bitmap.h> 10 #include <linux/bitops.h> 11 #include <linux/bottom_half.h> 12 #include <linux/bug.h> 13 #include <linux/cache.h> 14 #include <linux/compat.h> 15 #include <linux/compiler.h> 16 #include <linux/cpu.h> 17 #include <linux/cpu_pm.h> 18 #include <linux/kernel.h> 19 #include <linux/linkage.h> 20 #include <linux/irqflags.h> 21 #include <linux/init.h> 22 #include <linux/percpu.h> 23 #include <linux/prctl.h> 24 #include <linux/preempt.h> 25 #include <linux/ptrace.h> 26 #include <linux/sched/signal.h> 27 #include <linux/sched/task_stack.h> 28 #include <linux/signal.h> 29 #include <linux/slab.h> 30 #include <linux/stddef.h> 31 #include <linux/sysctl.h> 32 #include <linux/swab.h> 33 34 #include <asm/esr.h> 35 #include <asm/exception.h> 36 #include <asm/fpsimd.h> 37 #include <asm/cpufeature.h> 38 #include <asm/cputype.h> 39 #include <asm/neon.h> 40 #include <asm/processor.h> 41 #include <asm/simd.h> 42 #include <asm/sigcontext.h> 43 #include <asm/sysreg.h> 44 #include <asm/traps.h> 45 #include <asm/virt.h> 46 47 #define FPEXC_IOF (1 << 0) 48 #define FPEXC_DZF (1 << 1) 49 #define FPEXC_OFF (1 << 2) 50 #define FPEXC_UFF (1 << 3) 51 #define FPEXC_IXF (1 << 4) 52 #define FPEXC_IDF (1 << 7) 53 54 /* 55 * (Note: in this discussion, statements about FPSIMD apply equally to SVE.) 56 * 57 * In order to reduce the number of times the FPSIMD state is needlessly saved 58 * and restored, we need to keep track of two things: 59 * (a) for each task, we need to remember which CPU was the last one to have 60 * the task's FPSIMD state loaded into its FPSIMD registers; 61 * (b) for each CPU, we need to remember which task's userland FPSIMD state has 62 * been loaded into its FPSIMD registers most recently, or whether it has 63 * been used to perform kernel mode NEON in the meantime. 64 * 65 * For (a), we add a fpsimd_cpu field to thread_struct, which gets updated to 66 * the id of the current CPU every time the state is loaded onto a CPU. For (b), 67 * we add the per-cpu variable 'fpsimd_last_state' (below), which contains the 68 * address of the userland FPSIMD state of the task that was loaded onto the CPU 69 * the most recently, or NULL if kernel mode NEON has been performed after that. 70 * 71 * With this in place, we no longer have to restore the next FPSIMD state right 72 * when switching between tasks. Instead, we can defer this check to userland 73 * resume, at which time we verify whether the CPU's fpsimd_last_state and the 74 * task's fpsimd_cpu are still mutually in sync. If this is the case, we 75 * can omit the FPSIMD restore. 76 * 77 * As an optimization, we use the thread_info flag TIF_FOREIGN_FPSTATE to 78 * indicate whether or not the userland FPSIMD state of the current task is 79 * present in the registers. The flag is set unless the FPSIMD registers of this 80 * CPU currently contain the most recent userland FPSIMD state of the current 81 * task. 82 * 83 * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may 84 * save the task's FPSIMD context back to task_struct from softirq context. 85 * To prevent this from racing with the manipulation of the task's FPSIMD state 86 * from task context and thereby corrupting the state, it is necessary to 87 * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE 88 * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to 89 * run but prevent them to use FPSIMD. 90 * 91 * For a certain task, the sequence may look something like this: 92 * - the task gets scheduled in; if both the task's fpsimd_cpu field 93 * contains the id of the current CPU, and the CPU's fpsimd_last_state per-cpu 94 * variable points to the task's fpsimd_state, the TIF_FOREIGN_FPSTATE flag is 95 * cleared, otherwise it is set; 96 * 97 * - the task returns to userland; if TIF_FOREIGN_FPSTATE is set, the task's 98 * userland FPSIMD state is copied from memory to the registers, the task's 99 * fpsimd_cpu field is set to the id of the current CPU, the current 100 * CPU's fpsimd_last_state pointer is set to this task's fpsimd_state and the 101 * TIF_FOREIGN_FPSTATE flag is cleared; 102 * 103 * - the task executes an ordinary syscall; upon return to userland, the 104 * TIF_FOREIGN_FPSTATE flag will still be cleared, so no FPSIMD state is 105 * restored; 106 * 107 * - the task executes a syscall which executes some NEON instructions; this is 108 * preceded by a call to kernel_neon_begin(), which copies the task's FPSIMD 109 * register contents to memory, clears the fpsimd_last_state per-cpu variable 110 * and sets the TIF_FOREIGN_FPSTATE flag; 111 * 112 * - the task gets preempted after kernel_neon_end() is called; as we have not 113 * returned from the 2nd syscall yet, TIF_FOREIGN_FPSTATE is still set so 114 * whatever is in the FPSIMD registers is not saved to memory, but discarded. 115 */ 116 struct fpsimd_last_state_struct { 117 struct user_fpsimd_state *st; 118 void *sve_state; 119 unsigned int sve_vl; 120 }; 121 122 static DEFINE_PER_CPU(struct fpsimd_last_state_struct, fpsimd_last_state); 123 124 /* Default VL for tasks that don't set it explicitly: */ 125 static int __sve_default_vl = -1; 126 127 static int get_sve_default_vl(void) 128 { 129 return READ_ONCE(__sve_default_vl); 130 } 131 132 #ifdef CONFIG_ARM64_SVE 133 134 static void set_sve_default_vl(int val) 135 { 136 WRITE_ONCE(__sve_default_vl, val); 137 } 138 139 /* Maximum supported vector length across all CPUs (initially poisoned) */ 140 int __ro_after_init sve_max_vl = SVE_VL_MIN; 141 int __ro_after_init sve_max_virtualisable_vl = SVE_VL_MIN; 142 143 /* 144 * Set of available vector lengths, 145 * where length vq encoded as bit __vq_to_bit(vq): 146 */ 147 __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX); 148 /* Set of vector lengths present on at least one cpu: */ 149 static __ro_after_init DECLARE_BITMAP(sve_vq_partial_map, SVE_VQ_MAX); 150 151 static void __percpu *efi_sve_state; 152 153 #else /* ! CONFIG_ARM64_SVE */ 154 155 /* Dummy declaration for code that will be optimised out: */ 156 extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX); 157 extern __ro_after_init DECLARE_BITMAP(sve_vq_partial_map, SVE_VQ_MAX); 158 extern void __percpu *efi_sve_state; 159 160 #endif /* ! CONFIG_ARM64_SVE */ 161 162 DEFINE_PER_CPU(bool, fpsimd_context_busy); 163 EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy); 164 165 static void fpsimd_bind_task_to_cpu(void); 166 167 static void __get_cpu_fpsimd_context(void) 168 { 169 bool busy = __this_cpu_xchg(fpsimd_context_busy, true); 170 171 WARN_ON(busy); 172 } 173 174 /* 175 * Claim ownership of the CPU FPSIMD context for use by the calling context. 176 * 177 * The caller may freely manipulate the FPSIMD context metadata until 178 * put_cpu_fpsimd_context() is called. 179 * 180 * The double-underscore version must only be called if you know the task 181 * can't be preempted. 182 */ 183 static void get_cpu_fpsimd_context(void) 184 { 185 local_bh_disable(); 186 __get_cpu_fpsimd_context(); 187 } 188 189 static void __put_cpu_fpsimd_context(void) 190 { 191 bool busy = __this_cpu_xchg(fpsimd_context_busy, false); 192 193 WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */ 194 } 195 196 /* 197 * Release the CPU FPSIMD context. 198 * 199 * Must be called from a context in which get_cpu_fpsimd_context() was 200 * previously called, with no call to put_cpu_fpsimd_context() in the 201 * meantime. 202 */ 203 static void put_cpu_fpsimd_context(void) 204 { 205 __put_cpu_fpsimd_context(); 206 local_bh_enable(); 207 } 208 209 static bool have_cpu_fpsimd_context(void) 210 { 211 return !preemptible() && __this_cpu_read(fpsimd_context_busy); 212 } 213 214 /* 215 * Call __sve_free() directly only if you know task can't be scheduled 216 * or preempted. 217 */ 218 static void __sve_free(struct task_struct *task) 219 { 220 kfree(task->thread.sve_state); 221 task->thread.sve_state = NULL; 222 } 223 224 static void sve_free(struct task_struct *task) 225 { 226 WARN_ON(test_tsk_thread_flag(task, TIF_SVE)); 227 228 __sve_free(task); 229 } 230 231 /* 232 * TIF_SVE controls whether a task can use SVE without trapping while 233 * in userspace, and also the way a task's FPSIMD/SVE state is stored 234 * in thread_struct. 235 * 236 * The kernel uses this flag to track whether a user task is actively 237 * using SVE, and therefore whether full SVE register state needs to 238 * be tracked. If not, the cheaper FPSIMD context handling code can 239 * be used instead of the more costly SVE equivalents. 240 * 241 * * TIF_SVE set: 242 * 243 * The task can execute SVE instructions while in userspace without 244 * trapping to the kernel. 245 * 246 * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the 247 * corresponding Zn), P0-P15 and FFR are encoded in in 248 * task->thread.sve_state, formatted appropriately for vector 249 * length task->thread.sve_vl. 250 * 251 * task->thread.sve_state must point to a valid buffer at least 252 * sve_state_size(task) bytes in size. 253 * 254 * During any syscall, the kernel may optionally clear TIF_SVE and 255 * discard the vector state except for the FPSIMD subset. 256 * 257 * * TIF_SVE clear: 258 * 259 * An attempt by the user task to execute an SVE instruction causes 260 * do_sve_acc() to be called, which does some preparation and then 261 * sets TIF_SVE. 262 * 263 * When stored, FPSIMD registers V0-V31 are encoded in 264 * task->thread.uw.fpsimd_state; bits [max : 128] for each of Z0-Z31 are 265 * logically zero but not stored anywhere; P0-P15 and FFR are not 266 * stored and have unspecified values from userspace's point of 267 * view. For hygiene purposes, the kernel zeroes them on next use, 268 * but userspace is discouraged from relying on this. 269 * 270 * task->thread.sve_state does not need to be non-NULL, valid or any 271 * particular size: it must not be dereferenced. 272 * 273 * * FPSR and FPCR are always stored in task->thread.uw.fpsimd_state 274 * irrespective of whether TIF_SVE is clear or set, since these are 275 * not vector length dependent. 276 */ 277 278 /* 279 * Update current's FPSIMD/SVE registers from thread_struct. 280 * 281 * This function should be called only when the FPSIMD/SVE state in 282 * thread_struct is known to be up to date, when preparing to enter 283 * userspace. 284 */ 285 static void task_fpsimd_load(void) 286 { 287 WARN_ON(!system_supports_fpsimd()); 288 WARN_ON(!have_cpu_fpsimd_context()); 289 290 if (IS_ENABLED(CONFIG_ARM64_SVE) && test_thread_flag(TIF_SVE)) 291 sve_load_state(sve_pffr(¤t->thread), 292 ¤t->thread.uw.fpsimd_state.fpsr, 293 sve_vq_from_vl(current->thread.sve_vl) - 1); 294 else 295 fpsimd_load_state(¤t->thread.uw.fpsimd_state); 296 } 297 298 /* 299 * Ensure FPSIMD/SVE storage in memory for the loaded context is up to 300 * date with respect to the CPU registers. 301 */ 302 static void fpsimd_save(void) 303 { 304 struct fpsimd_last_state_struct const *last = 305 this_cpu_ptr(&fpsimd_last_state); 306 /* set by fpsimd_bind_task_to_cpu() or fpsimd_bind_state_to_cpu() */ 307 308 WARN_ON(!system_supports_fpsimd()); 309 WARN_ON(!have_cpu_fpsimd_context()); 310 311 if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { 312 if (IS_ENABLED(CONFIG_ARM64_SVE) && 313 test_thread_flag(TIF_SVE)) { 314 if (WARN_ON(sve_get_vl() != last->sve_vl)) { 315 /* 316 * Can't save the user regs, so current would 317 * re-enter user with corrupt state. 318 * There's no way to recover, so kill it: 319 */ 320 force_signal_inject(SIGKILL, SI_KERNEL, 0, 0); 321 return; 322 } 323 324 sve_save_state((char *)last->sve_state + 325 sve_ffr_offset(last->sve_vl), 326 &last->st->fpsr); 327 } else 328 fpsimd_save_state(last->st); 329 } 330 } 331 332 /* 333 * All vector length selection from userspace comes through here. 334 * We're on a slow path, so some sanity-checks are included. 335 * If things go wrong there's a bug somewhere, but try to fall back to a 336 * safe choice. 337 */ 338 static unsigned int find_supported_vector_length(unsigned int vl) 339 { 340 int bit; 341 int max_vl = sve_max_vl; 342 343 if (WARN_ON(!sve_vl_valid(vl))) 344 vl = SVE_VL_MIN; 345 346 if (WARN_ON(!sve_vl_valid(max_vl))) 347 max_vl = SVE_VL_MIN; 348 349 if (vl > max_vl) 350 vl = max_vl; 351 352 bit = find_next_bit(sve_vq_map, SVE_VQ_MAX, 353 __vq_to_bit(sve_vq_from_vl(vl))); 354 return sve_vl_from_vq(__bit_to_vq(bit)); 355 } 356 357 #if defined(CONFIG_ARM64_SVE) && defined(CONFIG_SYSCTL) 358 359 static int sve_proc_do_default_vl(struct ctl_table *table, int write, 360 void *buffer, size_t *lenp, loff_t *ppos) 361 { 362 int ret; 363 int vl = get_sve_default_vl(); 364 struct ctl_table tmp_table = { 365 .data = &vl, 366 .maxlen = sizeof(vl), 367 }; 368 369 ret = proc_dointvec(&tmp_table, write, buffer, lenp, ppos); 370 if (ret || !write) 371 return ret; 372 373 /* Writing -1 has the special meaning "set to max": */ 374 if (vl == -1) 375 vl = sve_max_vl; 376 377 if (!sve_vl_valid(vl)) 378 return -EINVAL; 379 380 set_sve_default_vl(find_supported_vector_length(vl)); 381 return 0; 382 } 383 384 static struct ctl_table sve_default_vl_table[] = { 385 { 386 .procname = "sve_default_vector_length", 387 .mode = 0644, 388 .proc_handler = sve_proc_do_default_vl, 389 }, 390 { } 391 }; 392 393 static int __init sve_sysctl_init(void) 394 { 395 if (system_supports_sve()) 396 if (!register_sysctl("abi", sve_default_vl_table)) 397 return -EINVAL; 398 399 return 0; 400 } 401 402 #else /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */ 403 static int __init sve_sysctl_init(void) { return 0; } 404 #endif /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */ 405 406 #define ZREG(sve_state, vq, n) ((char *)(sve_state) + \ 407 (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET)) 408 409 #ifdef CONFIG_CPU_BIG_ENDIAN 410 static __uint128_t arm64_cpu_to_le128(__uint128_t x) 411 { 412 u64 a = swab64(x); 413 u64 b = swab64(x >> 64); 414 415 return ((__uint128_t)a << 64) | b; 416 } 417 #else 418 static __uint128_t arm64_cpu_to_le128(__uint128_t x) 419 { 420 return x; 421 } 422 #endif 423 424 #define arm64_le128_to_cpu(x) arm64_cpu_to_le128(x) 425 426 static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst, 427 unsigned int vq) 428 { 429 unsigned int i; 430 __uint128_t *p; 431 432 for (i = 0; i < SVE_NUM_ZREGS; ++i) { 433 p = (__uint128_t *)ZREG(sst, vq, i); 434 *p = arm64_cpu_to_le128(fst->vregs[i]); 435 } 436 } 437 438 /* 439 * Transfer the FPSIMD state in task->thread.uw.fpsimd_state to 440 * task->thread.sve_state. 441 * 442 * Task can be a non-runnable task, or current. In the latter case, 443 * the caller must have ownership of the cpu FPSIMD context before calling 444 * this function. 445 * task->thread.sve_state must point to at least sve_state_size(task) 446 * bytes of allocated kernel memory. 447 * task->thread.uw.fpsimd_state must be up to date before calling this 448 * function. 449 */ 450 static void fpsimd_to_sve(struct task_struct *task) 451 { 452 unsigned int vq; 453 void *sst = task->thread.sve_state; 454 struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; 455 456 if (!system_supports_sve()) 457 return; 458 459 vq = sve_vq_from_vl(task->thread.sve_vl); 460 __fpsimd_to_sve(sst, fst, vq); 461 } 462 463 /* 464 * Transfer the SVE state in task->thread.sve_state to 465 * task->thread.uw.fpsimd_state. 466 * 467 * Task can be a non-runnable task, or current. In the latter case, 468 * the caller must have ownership of the cpu FPSIMD context before calling 469 * this function. 470 * task->thread.sve_state must point to at least sve_state_size(task) 471 * bytes of allocated kernel memory. 472 * task->thread.sve_state must be up to date before calling this function. 473 */ 474 static void sve_to_fpsimd(struct task_struct *task) 475 { 476 unsigned int vq; 477 void const *sst = task->thread.sve_state; 478 struct user_fpsimd_state *fst = &task->thread.uw.fpsimd_state; 479 unsigned int i; 480 __uint128_t const *p; 481 482 if (!system_supports_sve()) 483 return; 484 485 vq = sve_vq_from_vl(task->thread.sve_vl); 486 for (i = 0; i < SVE_NUM_ZREGS; ++i) { 487 p = (__uint128_t const *)ZREG(sst, vq, i); 488 fst->vregs[i] = arm64_le128_to_cpu(*p); 489 } 490 } 491 492 #ifdef CONFIG_ARM64_SVE 493 494 /* 495 * Return how many bytes of memory are required to store the full SVE 496 * state for task, given task's currently configured vector length. 497 */ 498 size_t sve_state_size(struct task_struct const *task) 499 { 500 return SVE_SIG_REGS_SIZE(sve_vq_from_vl(task->thread.sve_vl)); 501 } 502 503 /* 504 * Ensure that task->thread.sve_state is allocated and sufficiently large. 505 * 506 * This function should be used only in preparation for replacing 507 * task->thread.sve_state with new data. The memory is always zeroed 508 * here to prevent stale data from showing through: this is done in 509 * the interest of testability and predictability: except in the 510 * do_sve_acc() case, there is no ABI requirement to hide stale data 511 * written previously be task. 512 */ 513 void sve_alloc(struct task_struct *task) 514 { 515 if (task->thread.sve_state) { 516 memset(task->thread.sve_state, 0, sve_state_size(current)); 517 return; 518 } 519 520 /* This is a small allocation (maximum ~8KB) and Should Not Fail. */ 521 task->thread.sve_state = 522 kzalloc(sve_state_size(task), GFP_KERNEL); 523 } 524 525 526 /* 527 * Ensure that task->thread.sve_state is up to date with respect to 528 * the user task, irrespective of when SVE is in use or not. 529 * 530 * This should only be called by ptrace. task must be non-runnable. 531 * task->thread.sve_state must point to at least sve_state_size(task) 532 * bytes of allocated kernel memory. 533 */ 534 void fpsimd_sync_to_sve(struct task_struct *task) 535 { 536 if (!test_tsk_thread_flag(task, TIF_SVE)) 537 fpsimd_to_sve(task); 538 } 539 540 /* 541 * Ensure that task->thread.uw.fpsimd_state is up to date with respect to 542 * the user task, irrespective of whether SVE is in use or not. 543 * 544 * This should only be called by ptrace. task must be non-runnable. 545 * task->thread.sve_state must point to at least sve_state_size(task) 546 * bytes of allocated kernel memory. 547 */ 548 void sve_sync_to_fpsimd(struct task_struct *task) 549 { 550 if (test_tsk_thread_flag(task, TIF_SVE)) 551 sve_to_fpsimd(task); 552 } 553 554 /* 555 * Ensure that task->thread.sve_state is up to date with respect to 556 * the task->thread.uw.fpsimd_state. 557 * 558 * This should only be called by ptrace to merge new FPSIMD register 559 * values into a task for which SVE is currently active. 560 * task must be non-runnable. 561 * task->thread.sve_state must point to at least sve_state_size(task) 562 * bytes of allocated kernel memory. 563 * task->thread.uw.fpsimd_state must already have been initialised with 564 * the new FPSIMD register values to be merged in. 565 */ 566 void sve_sync_from_fpsimd_zeropad(struct task_struct *task) 567 { 568 unsigned int vq; 569 void *sst = task->thread.sve_state; 570 struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; 571 572 if (!test_tsk_thread_flag(task, TIF_SVE)) 573 return; 574 575 vq = sve_vq_from_vl(task->thread.sve_vl); 576 577 memset(sst, 0, SVE_SIG_REGS_SIZE(vq)); 578 __fpsimd_to_sve(sst, fst, vq); 579 } 580 581 int sve_set_vector_length(struct task_struct *task, 582 unsigned long vl, unsigned long flags) 583 { 584 if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT | 585 PR_SVE_SET_VL_ONEXEC)) 586 return -EINVAL; 587 588 if (!sve_vl_valid(vl)) 589 return -EINVAL; 590 591 /* 592 * Clamp to the maximum vector length that VL-agnostic SVE code can 593 * work with. A flag may be assigned in the future to allow setting 594 * of larger vector lengths without confusing older software. 595 */ 596 if (vl > SVE_VL_ARCH_MAX) 597 vl = SVE_VL_ARCH_MAX; 598 599 vl = find_supported_vector_length(vl); 600 601 if (flags & (PR_SVE_VL_INHERIT | 602 PR_SVE_SET_VL_ONEXEC)) 603 task->thread.sve_vl_onexec = vl; 604 else 605 /* Reset VL to system default on next exec: */ 606 task->thread.sve_vl_onexec = 0; 607 608 /* Only actually set the VL if not deferred: */ 609 if (flags & PR_SVE_SET_VL_ONEXEC) 610 goto out; 611 612 if (vl == task->thread.sve_vl) 613 goto out; 614 615 /* 616 * To ensure the FPSIMD bits of the SVE vector registers are preserved, 617 * write any live register state back to task_struct, and convert to a 618 * non-SVE thread. 619 */ 620 if (task == current) { 621 get_cpu_fpsimd_context(); 622 623 fpsimd_save(); 624 } 625 626 fpsimd_flush_task_state(task); 627 if (test_and_clear_tsk_thread_flag(task, TIF_SVE)) 628 sve_to_fpsimd(task); 629 630 if (task == current) 631 put_cpu_fpsimd_context(); 632 633 /* 634 * Force reallocation of task SVE state to the correct size 635 * on next use: 636 */ 637 sve_free(task); 638 639 task->thread.sve_vl = vl; 640 641 out: 642 update_tsk_thread_flag(task, TIF_SVE_VL_INHERIT, 643 flags & PR_SVE_VL_INHERIT); 644 645 return 0; 646 } 647 648 /* 649 * Encode the current vector length and flags for return. 650 * This is only required for prctl(): ptrace has separate fields 651 * 652 * flags are as for sve_set_vector_length(). 653 */ 654 static int sve_prctl_status(unsigned long flags) 655 { 656 int ret; 657 658 if (flags & PR_SVE_SET_VL_ONEXEC) 659 ret = current->thread.sve_vl_onexec; 660 else 661 ret = current->thread.sve_vl; 662 663 if (test_thread_flag(TIF_SVE_VL_INHERIT)) 664 ret |= PR_SVE_VL_INHERIT; 665 666 return ret; 667 } 668 669 /* PR_SVE_SET_VL */ 670 int sve_set_current_vl(unsigned long arg) 671 { 672 unsigned long vl, flags; 673 int ret; 674 675 vl = arg & PR_SVE_VL_LEN_MASK; 676 flags = arg & ~vl; 677 678 if (!system_supports_sve() || is_compat_task()) 679 return -EINVAL; 680 681 ret = sve_set_vector_length(current, vl, flags); 682 if (ret) 683 return ret; 684 685 return sve_prctl_status(flags); 686 } 687 688 /* PR_SVE_GET_VL */ 689 int sve_get_current_vl(void) 690 { 691 if (!system_supports_sve() || is_compat_task()) 692 return -EINVAL; 693 694 return sve_prctl_status(0); 695 } 696 697 static void sve_probe_vqs(DECLARE_BITMAP(map, SVE_VQ_MAX)) 698 { 699 unsigned int vq, vl; 700 unsigned long zcr; 701 702 bitmap_zero(map, SVE_VQ_MAX); 703 704 zcr = ZCR_ELx_LEN_MASK; 705 zcr = read_sysreg_s(SYS_ZCR_EL1) & ~zcr; 706 707 for (vq = SVE_VQ_MAX; vq >= SVE_VQ_MIN; --vq) { 708 write_sysreg_s(zcr | (vq - 1), SYS_ZCR_EL1); /* self-syncing */ 709 vl = sve_get_vl(); 710 vq = sve_vq_from_vl(vl); /* skip intervening lengths */ 711 set_bit(__vq_to_bit(vq), map); 712 } 713 } 714 715 /* 716 * Initialise the set of known supported VQs for the boot CPU. 717 * This is called during kernel boot, before secondary CPUs are brought up. 718 */ 719 void __init sve_init_vq_map(void) 720 { 721 sve_probe_vqs(sve_vq_map); 722 bitmap_copy(sve_vq_partial_map, sve_vq_map, SVE_VQ_MAX); 723 } 724 725 /* 726 * If we haven't committed to the set of supported VQs yet, filter out 727 * those not supported by the current CPU. 728 * This function is called during the bring-up of early secondary CPUs only. 729 */ 730 void sve_update_vq_map(void) 731 { 732 DECLARE_BITMAP(tmp_map, SVE_VQ_MAX); 733 734 sve_probe_vqs(tmp_map); 735 bitmap_and(sve_vq_map, sve_vq_map, tmp_map, SVE_VQ_MAX); 736 bitmap_or(sve_vq_partial_map, sve_vq_partial_map, tmp_map, SVE_VQ_MAX); 737 } 738 739 /* 740 * Check whether the current CPU supports all VQs in the committed set. 741 * This function is called during the bring-up of late secondary CPUs only. 742 */ 743 int sve_verify_vq_map(void) 744 { 745 DECLARE_BITMAP(tmp_map, SVE_VQ_MAX); 746 unsigned long b; 747 748 sve_probe_vqs(tmp_map); 749 750 bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX); 751 if (bitmap_intersects(tmp_map, sve_vq_map, SVE_VQ_MAX)) { 752 pr_warn("SVE: cpu%d: Required vector length(s) missing\n", 753 smp_processor_id()); 754 return -EINVAL; 755 } 756 757 if (!IS_ENABLED(CONFIG_KVM) || !is_hyp_mode_available()) 758 return 0; 759 760 /* 761 * For KVM, it is necessary to ensure that this CPU doesn't 762 * support any vector length that guests may have probed as 763 * unsupported. 764 */ 765 766 /* Recover the set of supported VQs: */ 767 bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX); 768 /* Find VQs supported that are not globally supported: */ 769 bitmap_andnot(tmp_map, tmp_map, sve_vq_map, SVE_VQ_MAX); 770 771 /* Find the lowest such VQ, if any: */ 772 b = find_last_bit(tmp_map, SVE_VQ_MAX); 773 if (b >= SVE_VQ_MAX) 774 return 0; /* no mismatches */ 775 776 /* 777 * Mismatches above sve_max_virtualisable_vl are fine, since 778 * no guest is allowed to configure ZCR_EL2.LEN to exceed this: 779 */ 780 if (sve_vl_from_vq(__bit_to_vq(b)) <= sve_max_virtualisable_vl) { 781 pr_warn("SVE: cpu%d: Unsupported vector length(s) present\n", 782 smp_processor_id()); 783 return -EINVAL; 784 } 785 786 return 0; 787 } 788 789 static void __init sve_efi_setup(void) 790 { 791 if (!IS_ENABLED(CONFIG_EFI)) 792 return; 793 794 /* 795 * alloc_percpu() warns and prints a backtrace if this goes wrong. 796 * This is evidence of a crippled system and we are returning void, 797 * so no attempt is made to handle this situation here. 798 */ 799 if (!sve_vl_valid(sve_max_vl)) 800 goto fail; 801 802 efi_sve_state = __alloc_percpu( 803 SVE_SIG_REGS_SIZE(sve_vq_from_vl(sve_max_vl)), SVE_VQ_BYTES); 804 if (!efi_sve_state) 805 goto fail; 806 807 return; 808 809 fail: 810 panic("Cannot allocate percpu memory for EFI SVE save/restore"); 811 } 812 813 /* 814 * Enable SVE for EL1. 815 * Intended for use by the cpufeatures code during CPU boot. 816 */ 817 void sve_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) 818 { 819 write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1); 820 isb(); 821 } 822 823 /* 824 * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE 825 * vector length. 826 * 827 * Use only if SVE is present. 828 * This function clobbers the SVE vector length. 829 */ 830 u64 read_zcr_features(void) 831 { 832 u64 zcr; 833 unsigned int vq_max; 834 835 /* 836 * Set the maximum possible VL, and write zeroes to all other 837 * bits to see if they stick. 838 */ 839 sve_kernel_enable(NULL); 840 write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1); 841 842 zcr = read_sysreg_s(SYS_ZCR_EL1); 843 zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */ 844 vq_max = sve_vq_from_vl(sve_get_vl()); 845 zcr |= vq_max - 1; /* set LEN field to maximum effective value */ 846 847 return zcr; 848 } 849 850 void __init sve_setup(void) 851 { 852 u64 zcr; 853 DECLARE_BITMAP(tmp_map, SVE_VQ_MAX); 854 unsigned long b; 855 856 if (!system_supports_sve()) 857 return; 858 859 /* 860 * The SVE architecture mandates support for 128-bit vectors, 861 * so sve_vq_map must have at least SVE_VQ_MIN set. 862 * If something went wrong, at least try to patch it up: 863 */ 864 if (WARN_ON(!test_bit(__vq_to_bit(SVE_VQ_MIN), sve_vq_map))) 865 set_bit(__vq_to_bit(SVE_VQ_MIN), sve_vq_map); 866 867 zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1); 868 sve_max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1); 869 870 /* 871 * Sanity-check that the max VL we determined through CPU features 872 * corresponds properly to sve_vq_map. If not, do our best: 873 */ 874 if (WARN_ON(sve_max_vl != find_supported_vector_length(sve_max_vl))) 875 sve_max_vl = find_supported_vector_length(sve_max_vl); 876 877 /* 878 * For the default VL, pick the maximum supported value <= 64. 879 * VL == 64 is guaranteed not to grow the signal frame. 880 */ 881 set_sve_default_vl(find_supported_vector_length(64)); 882 883 bitmap_andnot(tmp_map, sve_vq_partial_map, sve_vq_map, 884 SVE_VQ_MAX); 885 886 b = find_last_bit(tmp_map, SVE_VQ_MAX); 887 if (b >= SVE_VQ_MAX) 888 /* No non-virtualisable VLs found */ 889 sve_max_virtualisable_vl = SVE_VQ_MAX; 890 else if (WARN_ON(b == SVE_VQ_MAX - 1)) 891 /* No virtualisable VLs? This is architecturally forbidden. */ 892 sve_max_virtualisable_vl = SVE_VQ_MIN; 893 else /* b + 1 < SVE_VQ_MAX */ 894 sve_max_virtualisable_vl = sve_vl_from_vq(__bit_to_vq(b + 1)); 895 896 if (sve_max_virtualisable_vl > sve_max_vl) 897 sve_max_virtualisable_vl = sve_max_vl; 898 899 pr_info("SVE: maximum available vector length %u bytes per vector\n", 900 sve_max_vl); 901 pr_info("SVE: default vector length %u bytes per vector\n", 902 get_sve_default_vl()); 903 904 /* KVM decides whether to support mismatched systems. Just warn here: */ 905 if (sve_max_virtualisable_vl < sve_max_vl) 906 pr_warn("SVE: unvirtualisable vector lengths present\n"); 907 908 sve_efi_setup(); 909 } 910 911 /* 912 * Called from the put_task_struct() path, which cannot get here 913 * unless dead_task is really dead and not schedulable. 914 */ 915 void fpsimd_release_task(struct task_struct *dead_task) 916 { 917 __sve_free(dead_task); 918 } 919 920 #endif /* CONFIG_ARM64_SVE */ 921 922 /* 923 * Trapped SVE access 924 * 925 * Storage is allocated for the full SVE state, the current FPSIMD 926 * register contents are migrated across, and the access trap is 927 * disabled. 928 * 929 * TIF_SVE should be clear on entry: otherwise, fpsimd_restore_current_state() 930 * would have disabled the SVE access trap for userspace during 931 * ret_to_user, making an SVE access trap impossible in that case. 932 */ 933 void do_sve_acc(unsigned int esr, struct pt_regs *regs) 934 { 935 /* Even if we chose not to use SVE, the hardware could still trap: */ 936 if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) { 937 force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0); 938 return; 939 } 940 941 sve_alloc(current); 942 if (!current->thread.sve_state) { 943 force_sig(SIGKILL); 944 return; 945 } 946 947 get_cpu_fpsimd_context(); 948 949 if (test_and_set_thread_flag(TIF_SVE)) 950 WARN_ON(1); /* SVE access shouldn't have trapped */ 951 952 /* 953 * Convert the FPSIMD state to SVE, zeroing all the state that 954 * is not shared with FPSIMD. If (as is likely) the current 955 * state is live in the registers then do this there and 956 * update our metadata for the current task including 957 * disabling the trap, otherwise update our in-memory copy. 958 */ 959 if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { 960 unsigned long vq_minus_one = 961 sve_vq_from_vl(current->thread.sve_vl) - 1; 962 sve_set_vq(vq_minus_one); 963 sve_flush_live(vq_minus_one); 964 fpsimd_bind_task_to_cpu(); 965 } else { 966 fpsimd_to_sve(current); 967 } 968 969 put_cpu_fpsimd_context(); 970 } 971 972 /* 973 * Trapped FP/ASIMD access. 974 */ 975 void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) 976 { 977 /* TODO: implement lazy context saving/restoring */ 978 WARN_ON(1); 979 } 980 981 /* 982 * Raise a SIGFPE for the current process. 983 */ 984 void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) 985 { 986 unsigned int si_code = FPE_FLTUNK; 987 988 if (esr & ESR_ELx_FP_EXC_TFV) { 989 if (esr & FPEXC_IOF) 990 si_code = FPE_FLTINV; 991 else if (esr & FPEXC_DZF) 992 si_code = FPE_FLTDIV; 993 else if (esr & FPEXC_OFF) 994 si_code = FPE_FLTOVF; 995 else if (esr & FPEXC_UFF) 996 si_code = FPE_FLTUND; 997 else if (esr & FPEXC_IXF) 998 si_code = FPE_FLTRES; 999 } 1000 1001 send_sig_fault(SIGFPE, si_code, 1002 (void __user *)instruction_pointer(regs), 1003 current); 1004 } 1005 1006 void fpsimd_thread_switch(struct task_struct *next) 1007 { 1008 bool wrong_task, wrong_cpu; 1009 1010 if (!system_supports_fpsimd()) 1011 return; 1012 1013 __get_cpu_fpsimd_context(); 1014 1015 /* Save unsaved fpsimd state, if any: */ 1016 fpsimd_save(); 1017 1018 /* 1019 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's 1020 * state. For kernel threads, FPSIMD registers are never loaded 1021 * and wrong_task and wrong_cpu will always be true. 1022 */ 1023 wrong_task = __this_cpu_read(fpsimd_last_state.st) != 1024 &next->thread.uw.fpsimd_state; 1025 wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id(); 1026 1027 update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE, 1028 wrong_task || wrong_cpu); 1029 1030 __put_cpu_fpsimd_context(); 1031 } 1032 1033 void fpsimd_flush_thread(void) 1034 { 1035 int vl, supported_vl; 1036 1037 if (!system_supports_fpsimd()) 1038 return; 1039 1040 get_cpu_fpsimd_context(); 1041 1042 fpsimd_flush_task_state(current); 1043 memset(¤t->thread.uw.fpsimd_state, 0, 1044 sizeof(current->thread.uw.fpsimd_state)); 1045 1046 if (system_supports_sve()) { 1047 clear_thread_flag(TIF_SVE); 1048 sve_free(current); 1049 1050 /* 1051 * Reset the task vector length as required. 1052 * This is where we ensure that all user tasks have a valid 1053 * vector length configured: no kernel task can become a user 1054 * task without an exec and hence a call to this function. 1055 * By the time the first call to this function is made, all 1056 * early hardware probing is complete, so __sve_default_vl 1057 * should be valid. 1058 * If a bug causes this to go wrong, we make some noise and 1059 * try to fudge thread.sve_vl to a safe value here. 1060 */ 1061 vl = current->thread.sve_vl_onexec ? 1062 current->thread.sve_vl_onexec : get_sve_default_vl(); 1063 1064 if (WARN_ON(!sve_vl_valid(vl))) 1065 vl = SVE_VL_MIN; 1066 1067 supported_vl = find_supported_vector_length(vl); 1068 if (WARN_ON(supported_vl != vl)) 1069 vl = supported_vl; 1070 1071 current->thread.sve_vl = vl; 1072 1073 /* 1074 * If the task is not set to inherit, ensure that the vector 1075 * length will be reset by a subsequent exec: 1076 */ 1077 if (!test_thread_flag(TIF_SVE_VL_INHERIT)) 1078 current->thread.sve_vl_onexec = 0; 1079 } 1080 1081 put_cpu_fpsimd_context(); 1082 } 1083 1084 /* 1085 * Save the userland FPSIMD state of 'current' to memory, but only if the state 1086 * currently held in the registers does in fact belong to 'current' 1087 */ 1088 void fpsimd_preserve_current_state(void) 1089 { 1090 if (!system_supports_fpsimd()) 1091 return; 1092 1093 get_cpu_fpsimd_context(); 1094 fpsimd_save(); 1095 put_cpu_fpsimd_context(); 1096 } 1097 1098 /* 1099 * Like fpsimd_preserve_current_state(), but ensure that 1100 * current->thread.uw.fpsimd_state is updated so that it can be copied to 1101 * the signal frame. 1102 */ 1103 void fpsimd_signal_preserve_current_state(void) 1104 { 1105 fpsimd_preserve_current_state(); 1106 if (test_thread_flag(TIF_SVE)) 1107 sve_to_fpsimd(current); 1108 } 1109 1110 /* 1111 * Associate current's FPSIMD context with this cpu 1112 * The caller must have ownership of the cpu FPSIMD context before calling 1113 * this function. 1114 */ 1115 static void fpsimd_bind_task_to_cpu(void) 1116 { 1117 struct fpsimd_last_state_struct *last = 1118 this_cpu_ptr(&fpsimd_last_state); 1119 1120 WARN_ON(!system_supports_fpsimd()); 1121 last->st = ¤t->thread.uw.fpsimd_state; 1122 last->sve_state = current->thread.sve_state; 1123 last->sve_vl = current->thread.sve_vl; 1124 current->thread.fpsimd_cpu = smp_processor_id(); 1125 1126 if (system_supports_sve()) { 1127 /* Toggle SVE trapping for userspace if needed */ 1128 if (test_thread_flag(TIF_SVE)) 1129 sve_user_enable(); 1130 else 1131 sve_user_disable(); 1132 1133 /* Serialised by exception return to user */ 1134 } 1135 } 1136 1137 void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st, void *sve_state, 1138 unsigned int sve_vl) 1139 { 1140 struct fpsimd_last_state_struct *last = 1141 this_cpu_ptr(&fpsimd_last_state); 1142 1143 WARN_ON(!system_supports_fpsimd()); 1144 WARN_ON(!in_softirq() && !irqs_disabled()); 1145 1146 last->st = st; 1147 last->sve_state = sve_state; 1148 last->sve_vl = sve_vl; 1149 } 1150 1151 /* 1152 * Load the userland FPSIMD state of 'current' from memory, but only if the 1153 * FPSIMD state already held in the registers is /not/ the most recent FPSIMD 1154 * state of 'current' 1155 */ 1156 void fpsimd_restore_current_state(void) 1157 { 1158 /* 1159 * For the tasks that were created before we detected the absence of 1160 * FP/SIMD, the TIF_FOREIGN_FPSTATE could be set via fpsimd_thread_switch(), 1161 * e.g, init. This could be then inherited by the children processes. 1162 * If we later detect that the system doesn't support FP/SIMD, 1163 * we must clear the flag for all the tasks to indicate that the 1164 * FPSTATE is clean (as we can't have one) to avoid looping for ever in 1165 * do_notify_resume(). 1166 */ 1167 if (!system_supports_fpsimd()) { 1168 clear_thread_flag(TIF_FOREIGN_FPSTATE); 1169 return; 1170 } 1171 1172 get_cpu_fpsimd_context(); 1173 1174 if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) { 1175 task_fpsimd_load(); 1176 fpsimd_bind_task_to_cpu(); 1177 } 1178 1179 put_cpu_fpsimd_context(); 1180 } 1181 1182 /* 1183 * Load an updated userland FPSIMD state for 'current' from memory and set the 1184 * flag that indicates that the FPSIMD register contents are the most recent 1185 * FPSIMD state of 'current' 1186 */ 1187 void fpsimd_update_current_state(struct user_fpsimd_state const *state) 1188 { 1189 if (WARN_ON(!system_supports_fpsimd())) 1190 return; 1191 1192 get_cpu_fpsimd_context(); 1193 1194 current->thread.uw.fpsimd_state = *state; 1195 if (test_thread_flag(TIF_SVE)) 1196 fpsimd_to_sve(current); 1197 1198 task_fpsimd_load(); 1199 fpsimd_bind_task_to_cpu(); 1200 1201 clear_thread_flag(TIF_FOREIGN_FPSTATE); 1202 1203 put_cpu_fpsimd_context(); 1204 } 1205 1206 /* 1207 * Invalidate live CPU copies of task t's FPSIMD state 1208 * 1209 * This function may be called with preemption enabled. The barrier() 1210 * ensures that the assignment to fpsimd_cpu is visible to any 1211 * preemption/softirq that could race with set_tsk_thread_flag(), so 1212 * that TIF_FOREIGN_FPSTATE cannot be spuriously re-cleared. 1213 * 1214 * The final barrier ensures that TIF_FOREIGN_FPSTATE is seen set by any 1215 * subsequent code. 1216 */ 1217 void fpsimd_flush_task_state(struct task_struct *t) 1218 { 1219 t->thread.fpsimd_cpu = NR_CPUS; 1220 /* 1221 * If we don't support fpsimd, bail out after we have 1222 * reset the fpsimd_cpu for this task and clear the 1223 * FPSTATE. 1224 */ 1225 if (!system_supports_fpsimd()) 1226 return; 1227 barrier(); 1228 set_tsk_thread_flag(t, TIF_FOREIGN_FPSTATE); 1229 1230 barrier(); 1231 } 1232 1233 /* 1234 * Invalidate any task's FPSIMD state that is present on this cpu. 1235 * The FPSIMD context should be acquired with get_cpu_fpsimd_context() 1236 * before calling this function. 1237 */ 1238 static void fpsimd_flush_cpu_state(void) 1239 { 1240 WARN_ON(!system_supports_fpsimd()); 1241 __this_cpu_write(fpsimd_last_state.st, NULL); 1242 set_thread_flag(TIF_FOREIGN_FPSTATE); 1243 } 1244 1245 /* 1246 * Save the FPSIMD state to memory and invalidate cpu view. 1247 * This function must be called with preemption disabled. 1248 */ 1249 void fpsimd_save_and_flush_cpu_state(void) 1250 { 1251 if (!system_supports_fpsimd()) 1252 return; 1253 WARN_ON(preemptible()); 1254 __get_cpu_fpsimd_context(); 1255 fpsimd_save(); 1256 fpsimd_flush_cpu_state(); 1257 __put_cpu_fpsimd_context(); 1258 } 1259 1260 #ifdef CONFIG_KERNEL_MODE_NEON 1261 1262 /* 1263 * Kernel-side NEON support functions 1264 */ 1265 1266 /* 1267 * kernel_neon_begin(): obtain the CPU FPSIMD registers for use by the calling 1268 * context 1269 * 1270 * Must not be called unless may_use_simd() returns true. 1271 * Task context in the FPSIMD registers is saved back to memory as necessary. 1272 * 1273 * A matching call to kernel_neon_end() must be made before returning from the 1274 * calling context. 1275 * 1276 * The caller may freely use the FPSIMD registers until kernel_neon_end() is 1277 * called. 1278 */ 1279 void kernel_neon_begin(void) 1280 { 1281 if (WARN_ON(!system_supports_fpsimd())) 1282 return; 1283 1284 BUG_ON(!may_use_simd()); 1285 1286 get_cpu_fpsimd_context(); 1287 1288 /* Save unsaved fpsimd state, if any: */ 1289 fpsimd_save(); 1290 1291 /* Invalidate any task state remaining in the fpsimd regs: */ 1292 fpsimd_flush_cpu_state(); 1293 } 1294 EXPORT_SYMBOL(kernel_neon_begin); 1295 1296 /* 1297 * kernel_neon_end(): give the CPU FPSIMD registers back to the current task 1298 * 1299 * Must be called from a context in which kernel_neon_begin() was previously 1300 * called, with no call to kernel_neon_end() in the meantime. 1301 * 1302 * The caller must not use the FPSIMD registers after this function is called, 1303 * unless kernel_neon_begin() is called again in the meantime. 1304 */ 1305 void kernel_neon_end(void) 1306 { 1307 if (!system_supports_fpsimd()) 1308 return; 1309 1310 put_cpu_fpsimd_context(); 1311 } 1312 EXPORT_SYMBOL(kernel_neon_end); 1313 1314 #ifdef CONFIG_EFI 1315 1316 static DEFINE_PER_CPU(struct user_fpsimd_state, efi_fpsimd_state); 1317 static DEFINE_PER_CPU(bool, efi_fpsimd_state_used); 1318 static DEFINE_PER_CPU(bool, efi_sve_state_used); 1319 1320 /* 1321 * EFI runtime services support functions 1322 * 1323 * The ABI for EFI runtime services allows EFI to use FPSIMD during the call. 1324 * This means that for EFI (and only for EFI), we have to assume that FPSIMD 1325 * is always used rather than being an optional accelerator. 1326 * 1327 * These functions provide the necessary support for ensuring FPSIMD 1328 * save/restore in the contexts from which EFI is used. 1329 * 1330 * Do not use them for any other purpose -- if tempted to do so, you are 1331 * either doing something wrong or you need to propose some refactoring. 1332 */ 1333 1334 /* 1335 * __efi_fpsimd_begin(): prepare FPSIMD for making an EFI runtime services call 1336 */ 1337 void __efi_fpsimd_begin(void) 1338 { 1339 if (!system_supports_fpsimd()) 1340 return; 1341 1342 WARN_ON(preemptible()); 1343 1344 if (may_use_simd()) { 1345 kernel_neon_begin(); 1346 } else { 1347 /* 1348 * If !efi_sve_state, SVE can't be in use yet and doesn't need 1349 * preserving: 1350 */ 1351 if (system_supports_sve() && likely(efi_sve_state)) { 1352 char *sve_state = this_cpu_ptr(efi_sve_state); 1353 1354 __this_cpu_write(efi_sve_state_used, true); 1355 1356 sve_save_state(sve_state + sve_ffr_offset(sve_max_vl), 1357 &this_cpu_ptr(&efi_fpsimd_state)->fpsr); 1358 } else { 1359 fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state)); 1360 } 1361 1362 __this_cpu_write(efi_fpsimd_state_used, true); 1363 } 1364 } 1365 1366 /* 1367 * __efi_fpsimd_end(): clean up FPSIMD after an EFI runtime services call 1368 */ 1369 void __efi_fpsimd_end(void) 1370 { 1371 if (!system_supports_fpsimd()) 1372 return; 1373 1374 if (!__this_cpu_xchg(efi_fpsimd_state_used, false)) { 1375 kernel_neon_end(); 1376 } else { 1377 if (system_supports_sve() && 1378 likely(__this_cpu_read(efi_sve_state_used))) { 1379 char const *sve_state = this_cpu_ptr(efi_sve_state); 1380 1381 sve_load_state(sve_state + sve_ffr_offset(sve_max_vl), 1382 &this_cpu_ptr(&efi_fpsimd_state)->fpsr, 1383 sve_vq_from_vl(sve_get_vl()) - 1); 1384 1385 __this_cpu_write(efi_sve_state_used, false); 1386 } else { 1387 fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state)); 1388 } 1389 } 1390 } 1391 1392 #endif /* CONFIG_EFI */ 1393 1394 #endif /* CONFIG_KERNEL_MODE_NEON */ 1395 1396 #ifdef CONFIG_CPU_PM 1397 static int fpsimd_cpu_pm_notifier(struct notifier_block *self, 1398 unsigned long cmd, void *v) 1399 { 1400 switch (cmd) { 1401 case CPU_PM_ENTER: 1402 fpsimd_save_and_flush_cpu_state(); 1403 break; 1404 case CPU_PM_EXIT: 1405 break; 1406 case CPU_PM_ENTER_FAILED: 1407 default: 1408 return NOTIFY_DONE; 1409 } 1410 return NOTIFY_OK; 1411 } 1412 1413 static struct notifier_block fpsimd_cpu_pm_notifier_block = { 1414 .notifier_call = fpsimd_cpu_pm_notifier, 1415 }; 1416 1417 static void __init fpsimd_pm_init(void) 1418 { 1419 cpu_pm_register_notifier(&fpsimd_cpu_pm_notifier_block); 1420 } 1421 1422 #else 1423 static inline void fpsimd_pm_init(void) { } 1424 #endif /* CONFIG_CPU_PM */ 1425 1426 #ifdef CONFIG_HOTPLUG_CPU 1427 static int fpsimd_cpu_dead(unsigned int cpu) 1428 { 1429 per_cpu(fpsimd_last_state.st, cpu) = NULL; 1430 return 0; 1431 } 1432 1433 static inline void fpsimd_hotplug_init(void) 1434 { 1435 cpuhp_setup_state_nocalls(CPUHP_ARM64_FPSIMD_DEAD, "arm64/fpsimd:dead", 1436 NULL, fpsimd_cpu_dead); 1437 } 1438 1439 #else 1440 static inline void fpsimd_hotplug_init(void) { } 1441 #endif 1442 1443 /* 1444 * FP/SIMD support code initialisation. 1445 */ 1446 static int __init fpsimd_init(void) 1447 { 1448 if (cpu_have_named_feature(FP)) { 1449 fpsimd_pm_init(); 1450 fpsimd_hotplug_init(); 1451 } else { 1452 pr_notice("Floating-point is not implemented\n"); 1453 } 1454 1455 if (!cpu_have_named_feature(ASIMD)) 1456 pr_notice("Advanced SIMD is not implemented\n"); 1457 1458 return sve_sysctl_init(); 1459 } 1460 core_initcall(fpsimd_init); 1461