1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Based on arch/arm/include/asm/memory.h 4 * 5 * Copyright (C) 2000-2002 Russell King 6 * Copyright (C) 2012 ARM Ltd. 7 * 8 * Note: this file should not be included by non-asm/.h files 9 */ 10 #ifndef __ASM_MEMORY_H 11 #define __ASM_MEMORY_H 12 13 #include <linux/compiler.h> 14 #include <linux/const.h> 15 #include <linux/types.h> 16 #include <asm/bug.h> 17 #include <asm/page-def.h> 18 #include <linux/sizes.h> 19 20 /* 21 * Size of the PCI I/O space. This must remain a power of two so that 22 * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses. 23 */ 24 #define PCI_IO_SIZE SZ_16M 25 26 /* 27 * VMEMMAP_SIZE - allows the whole linear region to be covered by 28 * a struct page array 29 */ 30 #define VMEMMAP_SIZE (UL(1) << (VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)) 31 32 /* 33 * PAGE_OFFSET - the virtual address of the start of the linear map (top 34 * (VA_BITS - 1)) 35 * KIMAGE_VADDR - the virtual address of the start of the kernel image 36 * VA_BITS - the maximum number of bits for virtual addresses. 37 * VA_START - the first kernel virtual address. 38 */ 39 #define VA_BITS (CONFIG_ARM64_VA_BITS) 40 #define VA_START (UL(0xffffffffffffffff) - \ 41 (UL(1) << VA_BITS) + 1) 42 #define PAGE_OFFSET (UL(0xffffffffffffffff) - \ 43 (UL(1) << (VA_BITS - 1)) + 1) 44 #define KIMAGE_VADDR (MODULES_END) 45 #define BPF_JIT_REGION_START (VA_START + KASAN_SHADOW_SIZE) 46 #define BPF_JIT_REGION_SIZE (SZ_128M) 47 #define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE) 48 #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) 49 #define MODULES_VADDR (BPF_JIT_REGION_END) 50 #define MODULES_VSIZE (SZ_128M) 51 #define VMEMMAP_START (PAGE_OFFSET - VMEMMAP_SIZE) 52 #define PCI_IO_END (VMEMMAP_START - SZ_2M) 53 #define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE) 54 #define FIXADDR_TOP (PCI_IO_START - SZ_2M) 55 56 #define KERNEL_START _text 57 #define KERNEL_END _end 58 59 #ifdef CONFIG_ARM64_USER_VA_BITS_52 60 #define MAX_USER_VA_BITS 52 61 #else 62 #define MAX_USER_VA_BITS VA_BITS 63 #endif 64 65 /* 66 * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual 67 * address space for the shadow region respectively. They can bloat the stack 68 * significantly, so double the (minimum) stack size when they are in use. 69 */ 70 #ifdef CONFIG_KASAN 71 #define KASAN_SHADOW_SIZE (UL(1) << (VA_BITS - KASAN_SHADOW_SCALE_SHIFT)) 72 #define KASAN_THREAD_SHIFT 1 73 #else 74 #define KASAN_SHADOW_SIZE (0) 75 #define KASAN_THREAD_SHIFT 0 76 #endif 77 78 #define MIN_THREAD_SHIFT (14 + KASAN_THREAD_SHIFT) 79 80 /* 81 * VMAP'd stacks are allocated at page granularity, so we must ensure that such 82 * stacks are a multiple of page size. 83 */ 84 #if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT) 85 #define THREAD_SHIFT PAGE_SHIFT 86 #else 87 #define THREAD_SHIFT MIN_THREAD_SHIFT 88 #endif 89 90 #if THREAD_SHIFT >= PAGE_SHIFT 91 #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) 92 #endif 93 94 #define THREAD_SIZE (UL(1) << THREAD_SHIFT) 95 96 /* 97 * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by 98 * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry 99 * assembly. 100 */ 101 #ifdef CONFIG_VMAP_STACK 102 #define THREAD_ALIGN (2 * THREAD_SIZE) 103 #else 104 #define THREAD_ALIGN THREAD_SIZE 105 #endif 106 107 #define IRQ_STACK_SIZE THREAD_SIZE 108 109 #define OVERFLOW_STACK_SIZE SZ_4K 110 111 /* 112 * Alignment of kernel segments (e.g. .text, .data). 113 */ 114 #if defined(CONFIG_DEBUG_ALIGN_RODATA) 115 /* 116 * 4 KB granule: 1 level 2 entry 117 * 16 KB granule: 128 level 3 entries, with contiguous bit 118 * 64 KB granule: 32 level 3 entries, with contiguous bit 119 */ 120 #define SEGMENT_ALIGN SZ_2M 121 #else 122 /* 123 * 4 KB granule: 16 level 3 entries, with contiguous bit 124 * 16 KB granule: 4 level 3 entries, without contiguous bit 125 * 64 KB granule: 1 level 3 entry 126 */ 127 #define SEGMENT_ALIGN SZ_64K 128 #endif 129 130 /* 131 * Memory types available. 132 */ 133 #define MT_DEVICE_nGnRnE 0 134 #define MT_DEVICE_nGnRE 1 135 #define MT_DEVICE_GRE 2 136 #define MT_NORMAL_NC 3 137 #define MT_NORMAL 4 138 #define MT_NORMAL_WT 5 139 140 /* 141 * Memory types for Stage-2 translation 142 */ 143 #define MT_S2_NORMAL 0xf 144 #define MT_S2_DEVICE_nGnRE 0x1 145 146 /* 147 * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001 148 * Stage-2 enforces Normal-WB and Device-nGnRE 149 */ 150 #define MT_S2_FWB_NORMAL 6 151 #define MT_S2_FWB_DEVICE_nGnRE 1 152 153 #ifdef CONFIG_ARM64_4K_PAGES 154 #define IOREMAP_MAX_ORDER (PUD_SHIFT) 155 #else 156 #define IOREMAP_MAX_ORDER (PMD_SHIFT) 157 #endif 158 159 #ifndef __ASSEMBLY__ 160 161 #include <linux/bitops.h> 162 #include <linux/mmdebug.h> 163 164 extern s64 memstart_addr; 165 /* PHYS_OFFSET - the physical address of the start of memory. */ 166 #define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; }) 167 168 /* the virtual base of the kernel image (minus TEXT_OFFSET) */ 169 extern u64 kimage_vaddr; 170 171 /* the offset between the kernel virtual and physical mappings */ 172 extern u64 kimage_voffset; 173 174 static inline unsigned long kaslr_offset(void) 175 { 176 return kimage_vaddr - KIMAGE_VADDR; 177 } 178 179 /* the actual size of a user virtual address */ 180 extern u64 vabits_user; 181 182 /* 183 * Allow all memory at the discovery stage. We will clip it later. 184 */ 185 #define MIN_MEMBLOCK_ADDR 0 186 #define MAX_MEMBLOCK_ADDR U64_MAX 187 188 /* 189 * PFNs are used to describe any physical page; this means 190 * PFN 0 == physical address 0. 191 * 192 * This is the PFN of the first RAM page in the kernel 193 * direct-mapped view. We assume this is the first page 194 * of RAM in the mem_map as well. 195 */ 196 #define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) 197 198 /* 199 * When dealing with data aborts, watchpoints, or instruction traps we may end 200 * up with a tagged userland pointer. Clear the tag to get a sane pointer to 201 * pass on to access_ok(), for instance. 202 */ 203 #define untagged_addr(addr) \ 204 ((__typeof__(addr))sign_extend64((u64)(addr), 55)) 205 206 #ifdef CONFIG_KASAN_SW_TAGS 207 #define __tag_shifted(tag) ((u64)(tag) << 56) 208 #define __tag_set(addr, tag) (__typeof__(addr))( \ 209 ((u64)(addr) & ~__tag_shifted(0xff)) | __tag_shifted(tag)) 210 #define __tag_reset(addr) untagged_addr(addr) 211 #define __tag_get(addr) (__u8)((u64)(addr) >> 56) 212 #else 213 static inline const void *__tag_set(const void *addr, u8 tag) 214 { 215 return addr; 216 } 217 218 #define __tag_reset(addr) (addr) 219 #define __tag_get(addr) 0 220 #endif 221 222 /* 223 * Physical vs virtual RAM address space conversion. These are 224 * private definitions which should NOT be used outside memory.h 225 * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. 226 */ 227 228 229 /* 230 * The linear kernel range starts in the middle of the virtual adddress 231 * space. Testing the top bit for the start of the region is a 232 * sufficient check. 233 */ 234 #define __is_lm_address(addr) (!!((addr) & BIT(VA_BITS - 1))) 235 236 #define __lm_to_phys(addr) (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET) 237 #define __kimg_to_phys(addr) ((addr) - kimage_voffset) 238 239 #define __virt_to_phys_nodebug(x) ({ \ 240 phys_addr_t __x = (phys_addr_t)(x); \ 241 __is_lm_address(__x) ? __lm_to_phys(__x) : \ 242 __kimg_to_phys(__x); \ 243 }) 244 245 #define __pa_symbol_nodebug(x) __kimg_to_phys((phys_addr_t)(x)) 246 247 #ifdef CONFIG_DEBUG_VIRTUAL 248 extern phys_addr_t __virt_to_phys(unsigned long x); 249 extern phys_addr_t __phys_addr_symbol(unsigned long x); 250 #else 251 #define __virt_to_phys(x) __virt_to_phys_nodebug(x) 252 #define __phys_addr_symbol(x) __pa_symbol_nodebug(x) 253 #endif 254 255 #define __phys_to_virt(x) ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET) 256 #define __phys_to_kimg(x) ((unsigned long)((x) + kimage_voffset)) 257 258 /* 259 * Convert a page to/from a physical address 260 */ 261 #define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page))) 262 #define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys))) 263 264 /* 265 * Note: Drivers should NOT use these. They are the wrong 266 * translation for translating DMA addresses. Use the driver 267 * DMA support - see dma-mapping.h. 268 */ 269 #define virt_to_phys virt_to_phys 270 static inline phys_addr_t virt_to_phys(const volatile void *x) 271 { 272 return __virt_to_phys((unsigned long)(x)); 273 } 274 275 #define phys_to_virt phys_to_virt 276 static inline void *phys_to_virt(phys_addr_t x) 277 { 278 return (void *)(__phys_to_virt(x)); 279 } 280 281 /* 282 * Drivers should NOT use these either. 283 */ 284 #define __pa(x) __virt_to_phys((unsigned long)(x)) 285 #define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0)) 286 #define __pa_nodebug(x) __virt_to_phys_nodebug((unsigned long)(x)) 287 #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) 288 #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) 289 #define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys((unsigned long)(x))) 290 #define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x)) 291 292 /* 293 * virt_to_page(k) convert a _valid_ virtual address to struct page * 294 * virt_addr_valid(k) indicates whether a virtual address is valid 295 */ 296 #define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET) 297 298 #if !defined(CONFIG_SPARSEMEM_VMEMMAP) || defined(CONFIG_DEBUG_VIRTUAL) 299 #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) 300 #define _virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) 301 #else 302 #define __virt_to_pgoff(kaddr) (((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page)) 303 #define __page_to_voff(kaddr) (((u64)(kaddr) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page)) 304 305 #define page_to_virt(page) ({ \ 306 unsigned long __addr = \ 307 ((__page_to_voff(page)) | PAGE_OFFSET); \ 308 const void *__addr_tag = \ 309 __tag_set((void *)__addr, page_kasan_tag(page)); \ 310 ((void *)__addr_tag); \ 311 }) 312 313 #define virt_to_page(vaddr) ((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START)) 314 315 #define _virt_addr_valid(kaddr) pfn_valid((((u64)(kaddr) & ~PAGE_OFFSET) \ 316 + PHYS_OFFSET) >> PAGE_SHIFT) 317 #endif 318 #endif 319 320 #define _virt_addr_is_linear(kaddr) \ 321 (__tag_reset((u64)(kaddr)) >= PAGE_OFFSET) 322 #define virt_addr_valid(kaddr) \ 323 (_virt_addr_is_linear(kaddr) && _virt_addr_valid(kaddr)) 324 325 /* 326 * Given that the GIC architecture permits ITS implementations that can only be 327 * configured with a LPI table address once, GICv3 systems with many CPUs may 328 * end up reserving a lot of different regions after a kexec for their LPI 329 * tables (one per CPU), as we are forced to reuse the same memory after kexec 330 * (and thus reserve it persistently with EFI beforehand) 331 */ 332 #if defined(CONFIG_EFI) && defined(CONFIG_ARM_GIC_V3_ITS) 333 # define INIT_MEMBLOCK_RESERVED_REGIONS (INIT_MEMBLOCK_REGIONS + NR_CPUS + 1) 334 #endif 335 336 #include <asm-generic/memory_model.h> 337 338 #endif 339