xref: /openbmc/linux/arch/arm64/include/asm/kgdb.h (revision 791d3ef2)
1 /*
2  * AArch64 KGDB support
3  *
4  * Based on arch/arm/include/kgdb.h
5  *
6  * Copyright (C) 2013 Cavium Inc.
7  * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
20  */
21 
22 #ifndef __ARM_KGDB_H
23 #define __ARM_KGDB_H
24 
25 #include <linux/ptrace.h>
26 #include <asm/debug-monitors.h>
27 
28 #ifndef	__ASSEMBLY__
29 
30 static inline void arch_kgdb_breakpoint(void)
31 {
32 	asm ("brk %0" : : "I" (KGDB_COMPILED_DBG_BRK_IMM));
33 }
34 
35 extern void kgdb_handle_bus_error(void);
36 extern int kgdb_fault_expected;
37 
38 #endif /* !__ASSEMBLY__ */
39 
40 /*
41  * gdb remote procotol (well most versions of it) expects the following
42  * register layout.
43  *
44  * General purpose regs:
45  *     r0-r30: 64 bit
46  *     sp,pc : 64 bit
47  *     pstate  : 32 bit
48  *     Total: 33 + 1
49  * FPU regs:
50  *     f0-f31: 128 bit
51  *     fpsr & fpcr: 32 bit
52  *     Total: 32 + 2
53  *
54  * To expand a little on the "most versions of it"... when the gdb remote
55  * protocol for AArch64 was developed it depended on a statement in the
56  * Architecture Reference Manual that claimed "SPSR_ELx is a 32-bit register".
57  * and, as a result, allocated only 32-bits for the PSTATE in the remote
58  * protocol. In fact this statement is still present in ARM DDI 0487A.i.
59  *
60  * Unfortunately "is a 32-bit register" has a very special meaning for
61  * system registers. It means that "the upper bits, bits[63:32], are
62  * RES0.". RES0 is heavily used in the ARM architecture documents as a
63  * way to leave space for future architecture changes. So to translate a
64  * little for people who don't spend their spare time reading ARM architecture
65  * manuals, what "is a 32-bit register" actually means in this context is
66  * "is a 64-bit register but one with no meaning allocated to any of the
67  * upper 32-bits... *yet*".
68  *
69  * Perhaps then we should not be surprised that this has led to some
70  * confusion. Specifically a patch, influenced by the above translation,
71  * that extended PSTATE to 64-bit was accepted into gdb-7.7 but the patch
72  * was reverted in gdb-7.8.1 and all later releases, when this was
73  * discovered to be an undocumented protocol change.
74  *
75  * So... it is *not* wrong for us to only allocate 32-bits to PSTATE
76  * here even though the kernel itself allocates 64-bits for the same
77  * state. That is because this bit of code tells the kernel how the gdb
78  * remote protocol (well most versions of it) describes the register state.
79  *
80  * Note that if you are using one of the versions of gdb that supports
81  * the gdb-7.7 version of the protocol you cannot use kgdb directly
82  * without providing a custom register description (gdb can load new
83  * protocol descriptions at runtime).
84  */
85 
86 #define _GP_REGS		33
87 #define _FP_REGS		32
88 #define _EXTRA_REGS		3
89 /*
90  * general purpose registers size in bytes.
91  * pstate is only 4 bytes. subtract 4 bytes
92  */
93 #define GP_REG_BYTES		(_GP_REGS * 8)
94 #define DBG_MAX_REG_NUM		(_GP_REGS + _FP_REGS + _EXTRA_REGS)
95 
96 /*
97  * Size of I/O buffer for gdb packet.
98  * considering to hold all register contents, size is set
99  */
100 
101 #define BUFMAX			2048
102 
103 /*
104  * Number of bytes required for gdb_regs buffer.
105  * _GP_REGS: 8 bytes, _FP_REGS: 16 bytes and _EXTRA_REGS: 4 bytes each
106  * GDB fails to connect for size beyond this with error
107  * "'g' packet reply is too long"
108  */
109 
110 #define NUMREGBYTES	((_GP_REGS * 8) + (_FP_REGS * 16) + \
111 			(_EXTRA_REGS * 4))
112 
113 #endif /* __ASM_KGDB_H */
114