1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright (C) 2012 ARM Ltd. 4 */ 5 #ifndef __ASM_CACHE_H 6 #define __ASM_CACHE_H 7 8 #include <asm/cputype.h> 9 10 #define CTR_L1IP_SHIFT 14 11 #define CTR_L1IP_MASK 3 12 #define CTR_DMINLINE_SHIFT 16 13 #define CTR_IMINLINE_SHIFT 0 14 #define CTR_IMINLINE_MASK 0xf 15 #define CTR_ERG_SHIFT 20 16 #define CTR_CWG_SHIFT 24 17 #define CTR_CWG_MASK 15 18 #define CTR_IDC_SHIFT 28 19 #define CTR_DIC_SHIFT 29 20 21 #define CTR_CACHE_MINLINE_MASK \ 22 (0xf << CTR_DMINLINE_SHIFT | CTR_IMINLINE_MASK << CTR_IMINLINE_SHIFT) 23 24 #define CTR_L1IP(ctr) (((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK) 25 26 #define ICACHE_POLICY_VPIPT 0 27 #define ICACHE_POLICY_RESERVED 1 28 #define ICACHE_POLICY_VIPT 2 29 #define ICACHE_POLICY_PIPT 3 30 31 #define L1_CACHE_SHIFT (6) 32 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) 33 34 35 #define CLIDR_LOUU_SHIFT 27 36 #define CLIDR_LOC_SHIFT 24 37 #define CLIDR_LOUIS_SHIFT 21 38 39 #define CLIDR_LOUU(clidr) (((clidr) >> CLIDR_LOUU_SHIFT) & 0x7) 40 #define CLIDR_LOC(clidr) (((clidr) >> CLIDR_LOC_SHIFT) & 0x7) 41 #define CLIDR_LOUIS(clidr) (((clidr) >> CLIDR_LOUIS_SHIFT) & 0x7) 42 43 /* 44 * Memory returned by kmalloc() may be used for DMA, so we must make 45 * sure that all such allocations are cache aligned. Otherwise, 46 * unrelated code may cause parts of the buffer to be read into the 47 * cache before the transfer is done, causing old data to be seen by 48 * the CPU. 49 */ 50 #define ARCH_DMA_MINALIGN (128) 51 52 #ifdef CONFIG_KASAN_SW_TAGS 53 #define ARCH_SLAB_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT) 54 #elif defined(CONFIG_KASAN_HW_TAGS) 55 #define ARCH_SLAB_MINALIGN MTE_GRANULE_SIZE 56 #endif 57 58 #ifndef __ASSEMBLY__ 59 60 #include <linux/bitops.h> 61 62 #define ICACHEF_ALIASING 0 63 #define ICACHEF_VPIPT 1 64 extern unsigned long __icache_flags; 65 66 /* 67 * Whilst the D-side always behaves as PIPT on AArch64, aliasing is 68 * permitted in the I-cache. 69 */ 70 static inline int icache_is_aliasing(void) 71 { 72 return test_bit(ICACHEF_ALIASING, &__icache_flags); 73 } 74 75 static __always_inline int icache_is_vpipt(void) 76 { 77 return test_bit(ICACHEF_VPIPT, &__icache_flags); 78 } 79 80 static inline u32 cache_type_cwg(void) 81 { 82 return (read_cpuid_cachetype() >> CTR_CWG_SHIFT) & CTR_CWG_MASK; 83 } 84 85 #define __read_mostly __section(".data..read_mostly") 86 87 static inline int cache_line_size_of_cpu(void) 88 { 89 u32 cwg = cache_type_cwg(); 90 91 return cwg ? 4 << cwg : ARCH_DMA_MINALIGN; 92 } 93 94 int cache_line_size(void); 95 96 /* 97 * Read the effective value of CTR_EL0. 98 * 99 * According to ARM ARM for ARMv8-A (ARM DDI 0487C.a), 100 * section D10.2.33 "CTR_EL0, Cache Type Register" : 101 * 102 * CTR_EL0.IDC reports the data cache clean requirements for 103 * instruction to data coherence. 104 * 105 * 0 - dcache clean to PoU is required unless : 106 * (CLIDR_EL1.LoC == 0) || (CLIDR_EL1.LoUIS == 0 && CLIDR_EL1.LoUU == 0) 107 * 1 - dcache clean to PoU is not required for i-to-d coherence. 108 * 109 * This routine provides the CTR_EL0 with the IDC field updated to the 110 * effective state. 111 */ 112 static inline u32 __attribute_const__ read_cpuid_effective_cachetype(void) 113 { 114 u32 ctr = read_cpuid_cachetype(); 115 116 if (!(ctr & BIT(CTR_IDC_SHIFT))) { 117 u64 clidr = read_sysreg(clidr_el1); 118 119 if (CLIDR_LOC(clidr) == 0 || 120 (CLIDR_LOUIS(clidr) == 0 && CLIDR_LOUU(clidr) == 0)) 121 ctr |= BIT(CTR_IDC_SHIFT); 122 } 123 124 return ctr; 125 } 126 127 #endif /* __ASSEMBLY__ */ 128 129 #endif 130