1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Based on arch/arm/include/asm/assembler.h, arch/arm/mm/proc-macros.S 4 * 5 * Copyright (C) 1996-2000 Russell King 6 * Copyright (C) 2012 ARM Ltd. 7 */ 8 #ifndef __ASSEMBLY__ 9 #error "Only include this from assembly code" 10 #endif 11 12 #ifndef __ASM_ASSEMBLER_H 13 #define __ASM_ASSEMBLER_H 14 15 #include <asm-generic/export.h> 16 17 #include <asm/alternative.h> 18 #include <asm/asm-bug.h> 19 #include <asm/asm-extable.h> 20 #include <asm/asm-offsets.h> 21 #include <asm/cpufeature.h> 22 #include <asm/cputype.h> 23 #include <asm/debug-monitors.h> 24 #include <asm/page.h> 25 #include <asm/pgtable-hwdef.h> 26 #include <asm/ptrace.h> 27 #include <asm/thread_info.h> 28 29 /* 30 * Provide a wxN alias for each wN register so what we can paste a xN 31 * reference after a 'w' to obtain the 32-bit version. 32 */ 33 .irp n,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30 34 wx\n .req w\n 35 .endr 36 37 .macro save_and_disable_daif, flags 38 mrs \flags, daif 39 msr daifset, #0xf 40 .endm 41 42 .macro disable_daif 43 msr daifset, #0xf 44 .endm 45 46 .macro enable_daif 47 msr daifclr, #0xf 48 .endm 49 50 .macro restore_daif, flags:req 51 msr daif, \flags 52 .endm 53 54 /* IRQ/FIQ are the lowest priority flags, unconditionally unmask the rest. */ 55 .macro enable_da 56 msr daifclr, #(8 | 4) 57 .endm 58 59 /* 60 * Save/restore interrupts. 61 */ 62 .macro save_and_disable_irq, flags 63 mrs \flags, daif 64 msr daifset, #3 65 .endm 66 67 .macro restore_irq, flags 68 msr daif, \flags 69 .endm 70 71 .macro enable_dbg 72 msr daifclr, #8 73 .endm 74 75 .macro disable_step_tsk, flgs, tmp 76 tbz \flgs, #TIF_SINGLESTEP, 9990f 77 mrs \tmp, mdscr_el1 78 bic \tmp, \tmp, #DBG_MDSCR_SS 79 msr mdscr_el1, \tmp 80 isb // Synchronise with enable_dbg 81 9990: 82 .endm 83 84 /* call with daif masked */ 85 .macro enable_step_tsk, flgs, tmp 86 tbz \flgs, #TIF_SINGLESTEP, 9990f 87 mrs \tmp, mdscr_el1 88 orr \tmp, \tmp, #DBG_MDSCR_SS 89 msr mdscr_el1, \tmp 90 9990: 91 .endm 92 93 /* 94 * RAS Error Synchronization barrier 95 */ 96 .macro esb 97 #ifdef CONFIG_ARM64_RAS_EXTN 98 hint #16 99 #else 100 nop 101 #endif 102 .endm 103 104 /* 105 * Value prediction barrier 106 */ 107 .macro csdb 108 hint #20 109 .endm 110 111 /* 112 * Clear Branch History instruction 113 */ 114 .macro clearbhb 115 hint #22 116 .endm 117 118 /* 119 * Speculation barrier 120 */ 121 .macro sb 122 alternative_if_not ARM64_HAS_SB 123 dsb nsh 124 isb 125 alternative_else 126 SB_BARRIER_INSN 127 nop 128 alternative_endif 129 .endm 130 131 /* 132 * NOP sequence 133 */ 134 .macro nops, num 135 .rept \num 136 nop 137 .endr 138 .endm 139 140 /* 141 * Register aliases. 142 */ 143 lr .req x30 // link register 144 145 /* 146 * Vector entry 147 */ 148 .macro ventry label 149 .align 7 150 b \label 151 .endm 152 153 /* 154 * Select code when configured for BE. 155 */ 156 #ifdef CONFIG_CPU_BIG_ENDIAN 157 #define CPU_BE(code...) code 158 #else 159 #define CPU_BE(code...) 160 #endif 161 162 /* 163 * Select code when configured for LE. 164 */ 165 #ifdef CONFIG_CPU_BIG_ENDIAN 166 #define CPU_LE(code...) 167 #else 168 #define CPU_LE(code...) code 169 #endif 170 171 /* 172 * Define a macro that constructs a 64-bit value by concatenating two 173 * 32-bit registers. Note that on big endian systems the order of the 174 * registers is swapped. 175 */ 176 #ifndef CONFIG_CPU_BIG_ENDIAN 177 .macro regs_to_64, rd, lbits, hbits 178 #else 179 .macro regs_to_64, rd, hbits, lbits 180 #endif 181 orr \rd, \lbits, \hbits, lsl #32 182 .endm 183 184 /* 185 * Pseudo-ops for PC-relative adr/ldr/str <reg>, <symbol> where 186 * <symbol> is within the range +/- 4 GB of the PC. 187 */ 188 /* 189 * @dst: destination register (64 bit wide) 190 * @sym: name of the symbol 191 */ 192 .macro adr_l, dst, sym 193 adrp \dst, \sym 194 add \dst, \dst, :lo12:\sym 195 .endm 196 197 /* 198 * @dst: destination register (32 or 64 bit wide) 199 * @sym: name of the symbol 200 * @tmp: optional 64-bit scratch register to be used if <dst> is a 201 * 32-bit wide register, in which case it cannot be used to hold 202 * the address 203 */ 204 .macro ldr_l, dst, sym, tmp= 205 .ifb \tmp 206 adrp \dst, \sym 207 ldr \dst, [\dst, :lo12:\sym] 208 .else 209 adrp \tmp, \sym 210 ldr \dst, [\tmp, :lo12:\sym] 211 .endif 212 .endm 213 214 /* 215 * @src: source register (32 or 64 bit wide) 216 * @sym: name of the symbol 217 * @tmp: mandatory 64-bit scratch register to calculate the address 218 * while <src> needs to be preserved. 219 */ 220 .macro str_l, src, sym, tmp 221 adrp \tmp, \sym 222 str \src, [\tmp, :lo12:\sym] 223 .endm 224 225 /* 226 * @dst: destination register 227 */ 228 #if defined(__KVM_NVHE_HYPERVISOR__) || defined(__KVM_VHE_HYPERVISOR__) 229 .macro get_this_cpu_offset, dst 230 mrs \dst, tpidr_el2 231 .endm 232 #else 233 .macro get_this_cpu_offset, dst 234 alternative_if_not ARM64_HAS_VIRT_HOST_EXTN 235 mrs \dst, tpidr_el1 236 alternative_else 237 mrs \dst, tpidr_el2 238 alternative_endif 239 .endm 240 241 .macro set_this_cpu_offset, src 242 alternative_if_not ARM64_HAS_VIRT_HOST_EXTN 243 msr tpidr_el1, \src 244 alternative_else 245 msr tpidr_el2, \src 246 alternative_endif 247 .endm 248 #endif 249 250 /* 251 * @dst: Result of per_cpu(sym, smp_processor_id()) (can be SP) 252 * @sym: The name of the per-cpu variable 253 * @tmp: scratch register 254 */ 255 .macro adr_this_cpu, dst, sym, tmp 256 adrp \tmp, \sym 257 add \dst, \tmp, #:lo12:\sym 258 get_this_cpu_offset \tmp 259 add \dst, \dst, \tmp 260 .endm 261 262 /* 263 * @dst: Result of READ_ONCE(per_cpu(sym, smp_processor_id())) 264 * @sym: The name of the per-cpu variable 265 * @tmp: scratch register 266 */ 267 .macro ldr_this_cpu dst, sym, tmp 268 adr_l \dst, \sym 269 get_this_cpu_offset \tmp 270 ldr \dst, [\dst, \tmp] 271 .endm 272 273 /* 274 * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm) 275 */ 276 .macro vma_vm_mm, rd, rn 277 ldr \rd, [\rn, #VMA_VM_MM] 278 .endm 279 280 /* 281 * read_ctr - read CTR_EL0. If the system has mismatched register fields, 282 * provide the system wide safe value from arm64_ftr_reg_ctrel0.sys_val 283 */ 284 .macro read_ctr, reg 285 #ifndef __KVM_NVHE_HYPERVISOR__ 286 alternative_if_not ARM64_MISMATCHED_CACHE_TYPE 287 mrs \reg, ctr_el0 // read CTR 288 nop 289 alternative_else 290 ldr_l \reg, arm64_ftr_reg_ctrel0 + ARM64_FTR_SYSVAL 291 alternative_endif 292 #else 293 alternative_if_not ARM64_KVM_PROTECTED_MODE 294 ASM_BUG() 295 alternative_else_nop_endif 296 alternative_cb kvm_compute_final_ctr_el0 297 movz \reg, #0 298 movk \reg, #0, lsl #16 299 movk \reg, #0, lsl #32 300 movk \reg, #0, lsl #48 301 alternative_cb_end 302 #endif 303 .endm 304 305 306 /* 307 * raw_dcache_line_size - get the minimum D-cache line size on this CPU 308 * from the CTR register. 309 */ 310 .macro raw_dcache_line_size, reg, tmp 311 mrs \tmp, ctr_el0 // read CTR 312 ubfm \tmp, \tmp, #16, #19 // cache line size encoding 313 mov \reg, #4 // bytes per word 314 lsl \reg, \reg, \tmp // actual cache line size 315 .endm 316 317 /* 318 * dcache_line_size - get the safe D-cache line size across all CPUs 319 */ 320 .macro dcache_line_size, reg, tmp 321 read_ctr \tmp 322 ubfm \tmp, \tmp, #16, #19 // cache line size encoding 323 mov \reg, #4 // bytes per word 324 lsl \reg, \reg, \tmp // actual cache line size 325 .endm 326 327 /* 328 * raw_icache_line_size - get the minimum I-cache line size on this CPU 329 * from the CTR register. 330 */ 331 .macro raw_icache_line_size, reg, tmp 332 mrs \tmp, ctr_el0 // read CTR 333 and \tmp, \tmp, #0xf // cache line size encoding 334 mov \reg, #4 // bytes per word 335 lsl \reg, \reg, \tmp // actual cache line size 336 .endm 337 338 /* 339 * icache_line_size - get the safe I-cache line size across all CPUs 340 */ 341 .macro icache_line_size, reg, tmp 342 read_ctr \tmp 343 and \tmp, \tmp, #0xf // cache line size encoding 344 mov \reg, #4 // bytes per word 345 lsl \reg, \reg, \tmp // actual cache line size 346 .endm 347 348 /* 349 * tcr_set_t0sz - update TCR.T0SZ so that we can load the ID map 350 */ 351 .macro tcr_set_t0sz, valreg, t0sz 352 bfi \valreg, \t0sz, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH 353 .endm 354 355 /* 356 * tcr_set_t1sz - update TCR.T1SZ 357 */ 358 .macro tcr_set_t1sz, valreg, t1sz 359 bfi \valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH 360 .endm 361 362 /* 363 * tcr_compute_pa_size - set TCR.(I)PS to the highest supported 364 * ID_AA64MMFR0_EL1.PARange value 365 * 366 * tcr: register with the TCR_ELx value to be updated 367 * pos: IPS or PS bitfield position 368 * tmp{0,1}: temporary registers 369 */ 370 .macro tcr_compute_pa_size, tcr, pos, tmp0, tmp1 371 mrs \tmp0, ID_AA64MMFR0_EL1 372 // Narrow PARange to fit the PS field in TCR_ELx 373 ubfx \tmp0, \tmp0, #ID_AA64MMFR0_PARANGE_SHIFT, #3 374 mov \tmp1, #ID_AA64MMFR0_PARANGE_MAX 375 cmp \tmp0, \tmp1 376 csel \tmp0, \tmp1, \tmp0, hi 377 bfi \tcr, \tmp0, \pos, #3 378 .endm 379 380 .macro __dcache_op_workaround_clean_cache, op, addr 381 alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE 382 dc \op, \addr 383 alternative_else 384 dc civac, \addr 385 alternative_endif 386 .endm 387 388 /* 389 * Macro to perform a data cache maintenance for the interval 390 * [start, end) with dcache line size explicitly provided. 391 * 392 * op: operation passed to dc instruction 393 * domain: domain used in dsb instruciton 394 * start: starting virtual address of the region 395 * end: end virtual address of the region 396 * linesz: dcache line size 397 * fixup: optional label to branch to on user fault 398 * Corrupts: start, end, tmp 399 */ 400 .macro dcache_by_myline_op op, domain, start, end, linesz, tmp, fixup 401 sub \tmp, \linesz, #1 402 bic \start, \start, \tmp 403 .Ldcache_op\@: 404 .ifc \op, cvau 405 __dcache_op_workaround_clean_cache \op, \start 406 .else 407 .ifc \op, cvac 408 __dcache_op_workaround_clean_cache \op, \start 409 .else 410 .ifc \op, cvap 411 sys 3, c7, c12, 1, \start // dc cvap 412 .else 413 .ifc \op, cvadp 414 sys 3, c7, c13, 1, \start // dc cvadp 415 .else 416 dc \op, \start 417 .endif 418 .endif 419 .endif 420 .endif 421 add \start, \start, \linesz 422 cmp \start, \end 423 b.lo .Ldcache_op\@ 424 dsb \domain 425 426 _cond_extable .Ldcache_op\@, \fixup 427 .endm 428 429 /* 430 * Macro to perform a data cache maintenance for the interval 431 * [start, end) 432 * 433 * op: operation passed to dc instruction 434 * domain: domain used in dsb instruciton 435 * start: starting virtual address of the region 436 * end: end virtual address of the region 437 * fixup: optional label to branch to on user fault 438 * Corrupts: start, end, tmp1, tmp2 439 */ 440 .macro dcache_by_line_op op, domain, start, end, tmp1, tmp2, fixup 441 dcache_line_size \tmp1, \tmp2 442 dcache_by_myline_op \op, \domain, \start, \end, \tmp1, \tmp2, \fixup 443 .endm 444 445 /* 446 * Macro to perform an instruction cache maintenance for the interval 447 * [start, end) 448 * 449 * start, end: virtual addresses describing the region 450 * fixup: optional label to branch to on user fault 451 * Corrupts: tmp1, tmp2 452 */ 453 .macro invalidate_icache_by_line start, end, tmp1, tmp2, fixup 454 icache_line_size \tmp1, \tmp2 455 sub \tmp2, \tmp1, #1 456 bic \tmp2, \start, \tmp2 457 .Licache_op\@: 458 ic ivau, \tmp2 // invalidate I line PoU 459 add \tmp2, \tmp2, \tmp1 460 cmp \tmp2, \end 461 b.lo .Licache_op\@ 462 dsb ish 463 isb 464 465 _cond_extable .Licache_op\@, \fixup 466 .endm 467 468 /* 469 * To prevent the possibility of old and new partial table walks being visible 470 * in the tlb, switch the ttbr to a zero page when we invalidate the old 471 * records. D4.7.1 'General TLB maintenance requirements' in ARM DDI 0487A.i 472 * Even switching to our copied tables will cause a changed output address at 473 * each stage of the walk. 474 */ 475 .macro break_before_make_ttbr_switch zero_page, page_table, tmp, tmp2 476 phys_to_ttbr \tmp, \zero_page 477 msr ttbr1_el1, \tmp 478 isb 479 tlbi vmalle1 480 dsb nsh 481 phys_to_ttbr \tmp, \page_table 482 offset_ttbr1 \tmp, \tmp2 483 msr ttbr1_el1, \tmp 484 isb 485 .endm 486 487 /* 488 * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present 489 */ 490 .macro reset_pmuserenr_el0, tmpreg 491 mrs \tmpreg, id_aa64dfr0_el1 492 sbfx \tmpreg, \tmpreg, #ID_AA64DFR0_PMUVER_SHIFT, #4 493 cmp \tmpreg, #1 // Skip if no PMU present 494 b.lt 9000f 495 msr pmuserenr_el0, xzr // Disable PMU access from EL0 496 9000: 497 .endm 498 499 /* 500 * reset_amuserenr_el0 - reset AMUSERENR_EL0 if AMUv1 present 501 */ 502 .macro reset_amuserenr_el0, tmpreg 503 mrs \tmpreg, id_aa64pfr0_el1 // Check ID_AA64PFR0_EL1 504 ubfx \tmpreg, \tmpreg, #ID_AA64PFR0_AMU_SHIFT, #4 505 cbz \tmpreg, .Lskip_\@ // Skip if no AMU present 506 msr_s SYS_AMUSERENR_EL0, xzr // Disable AMU access from EL0 507 .Lskip_\@: 508 .endm 509 /* 510 * copy_page - copy src to dest using temp registers t1-t8 511 */ 512 .macro copy_page dest:req src:req t1:req t2:req t3:req t4:req t5:req t6:req t7:req t8:req 513 9998: ldp \t1, \t2, [\src] 514 ldp \t3, \t4, [\src, #16] 515 ldp \t5, \t6, [\src, #32] 516 ldp \t7, \t8, [\src, #48] 517 add \src, \src, #64 518 stnp \t1, \t2, [\dest] 519 stnp \t3, \t4, [\dest, #16] 520 stnp \t5, \t6, [\dest, #32] 521 stnp \t7, \t8, [\dest, #48] 522 add \dest, \dest, #64 523 tst \src, #(PAGE_SIZE - 1) 524 b.ne 9998b 525 .endm 526 527 /* 528 * Annotate a function as being unsuitable for kprobes. 529 */ 530 #ifdef CONFIG_KPROBES 531 #define NOKPROBE(x) \ 532 .pushsection "_kprobe_blacklist", "aw"; \ 533 .quad x; \ 534 .popsection; 535 #else 536 #define NOKPROBE(x) 537 #endif 538 539 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) 540 #define EXPORT_SYMBOL_NOKASAN(name) 541 #else 542 #define EXPORT_SYMBOL_NOKASAN(name) EXPORT_SYMBOL(name) 543 #endif 544 545 /* 546 * Emit a 64-bit absolute little endian symbol reference in a way that 547 * ensures that it will be resolved at build time, even when building a 548 * PIE binary. This requires cooperation from the linker script, which 549 * must emit the lo32/hi32 halves individually. 550 */ 551 .macro le64sym, sym 552 .long \sym\()_lo32 553 .long \sym\()_hi32 554 .endm 555 556 /* 557 * mov_q - move an immediate constant into a 64-bit register using 558 * between 2 and 4 movz/movk instructions (depending on the 559 * magnitude and sign of the operand) 560 */ 561 .macro mov_q, reg, val 562 .if (((\val) >> 31) == 0 || ((\val) >> 31) == 0x1ffffffff) 563 movz \reg, :abs_g1_s:\val 564 .else 565 .if (((\val) >> 47) == 0 || ((\val) >> 47) == 0x1ffff) 566 movz \reg, :abs_g2_s:\val 567 .else 568 movz \reg, :abs_g3:\val 569 movk \reg, :abs_g2_nc:\val 570 .endif 571 movk \reg, :abs_g1_nc:\val 572 .endif 573 movk \reg, :abs_g0_nc:\val 574 .endm 575 576 /* 577 * Return the current task_struct. 578 */ 579 .macro get_current_task, rd 580 mrs \rd, sp_el0 581 .endm 582 583 /* 584 * Offset ttbr1 to allow for 48-bit kernel VAs set with 52-bit PTRS_PER_PGD. 585 * orr is used as it can cover the immediate value (and is idempotent). 586 * In future this may be nop'ed out when dealing with 52-bit kernel VAs. 587 * ttbr: Value of ttbr to set, modified. 588 */ 589 .macro offset_ttbr1, ttbr, tmp 590 #ifdef CONFIG_ARM64_VA_BITS_52 591 mrs_s \tmp, SYS_ID_AA64MMFR2_EL1 592 and \tmp, \tmp, #(0xf << ID_AA64MMFR2_LVA_SHIFT) 593 cbnz \tmp, .Lskipoffs_\@ 594 orr \ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET 595 .Lskipoffs_\@ : 596 #endif 597 .endm 598 599 /* 600 * Perform the reverse of offset_ttbr1. 601 * bic is used as it can cover the immediate value and, in future, won't need 602 * to be nop'ed out when dealing with 52-bit kernel VAs. 603 */ 604 .macro restore_ttbr1, ttbr 605 #ifdef CONFIG_ARM64_VA_BITS_52 606 bic \ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET 607 #endif 608 .endm 609 610 /* 611 * Arrange a physical address in a TTBR register, taking care of 52-bit 612 * addresses. 613 * 614 * phys: physical address, preserved 615 * ttbr: returns the TTBR value 616 */ 617 .macro phys_to_ttbr, ttbr, phys 618 #ifdef CONFIG_ARM64_PA_BITS_52 619 orr \ttbr, \phys, \phys, lsr #46 620 and \ttbr, \ttbr, #TTBR_BADDR_MASK_52 621 #else 622 mov \ttbr, \phys 623 #endif 624 .endm 625 626 .macro phys_to_pte, pte, phys 627 #ifdef CONFIG_ARM64_PA_BITS_52 628 /* 629 * We assume \phys is 64K aligned and this is guaranteed by only 630 * supporting this configuration with 64K pages. 631 */ 632 orr \pte, \phys, \phys, lsr #36 633 and \pte, \pte, #PTE_ADDR_MASK 634 #else 635 mov \pte, \phys 636 #endif 637 .endm 638 639 .macro pte_to_phys, phys, pte 640 #ifdef CONFIG_ARM64_PA_BITS_52 641 ubfiz \phys, \pte, #(48 - 16 - 12), #16 642 bfxil \phys, \pte, #16, #32 643 lsl \phys, \phys, #16 644 #else 645 and \phys, \pte, #PTE_ADDR_MASK 646 #endif 647 .endm 648 649 /* 650 * tcr_clear_errata_bits - Clear TCR bits that trigger an errata on this CPU. 651 */ 652 .macro tcr_clear_errata_bits, tcr, tmp1, tmp2 653 #ifdef CONFIG_FUJITSU_ERRATUM_010001 654 mrs \tmp1, midr_el1 655 656 mov_q \tmp2, MIDR_FUJITSU_ERRATUM_010001_MASK 657 and \tmp1, \tmp1, \tmp2 658 mov_q \tmp2, MIDR_FUJITSU_ERRATUM_010001 659 cmp \tmp1, \tmp2 660 b.ne 10f 661 662 mov_q \tmp2, TCR_CLEAR_FUJITSU_ERRATUM_010001 663 bic \tcr, \tcr, \tmp2 664 10: 665 #endif /* CONFIG_FUJITSU_ERRATUM_010001 */ 666 .endm 667 668 /** 669 * Errata workaround prior to disable MMU. Insert an ISB immediately prior 670 * to executing the MSR that will change SCTLR_ELn[M] from a value of 1 to 0. 671 */ 672 .macro pre_disable_mmu_workaround 673 #ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041 674 isb 675 #endif 676 .endm 677 678 /* 679 * frame_push - Push @regcount callee saved registers to the stack, 680 * starting at x19, as well as x29/x30, and set x29 to 681 * the new value of sp. Add @extra bytes of stack space 682 * for locals. 683 */ 684 .macro frame_push, regcount:req, extra 685 __frame st, \regcount, \extra 686 .endm 687 688 /* 689 * frame_pop - Pop the callee saved registers from the stack that were 690 * pushed in the most recent call to frame_push, as well 691 * as x29/x30 and any extra stack space that may have been 692 * allocated. 693 */ 694 .macro frame_pop 695 __frame ld 696 .endm 697 698 .macro __frame_regs, reg1, reg2, op, num 699 .if .Lframe_regcount == \num 700 \op\()r \reg1, [sp, #(\num + 1) * 8] 701 .elseif .Lframe_regcount > \num 702 \op\()p \reg1, \reg2, [sp, #(\num + 1) * 8] 703 .endif 704 .endm 705 706 .macro __frame, op, regcount, extra=0 707 .ifc \op, st 708 .if (\regcount) < 0 || (\regcount) > 10 709 .error "regcount should be in the range [0 ... 10]" 710 .endif 711 .if ((\extra) % 16) != 0 712 .error "extra should be a multiple of 16 bytes" 713 .endif 714 .ifdef .Lframe_regcount 715 .if .Lframe_regcount != -1 716 .error "frame_push/frame_pop may not be nested" 717 .endif 718 .endif 719 .set .Lframe_regcount, \regcount 720 .set .Lframe_extra, \extra 721 .set .Lframe_local_offset, ((\regcount + 3) / 2) * 16 722 stp x29, x30, [sp, #-.Lframe_local_offset - .Lframe_extra]! 723 mov x29, sp 724 .endif 725 726 __frame_regs x19, x20, \op, 1 727 __frame_regs x21, x22, \op, 3 728 __frame_regs x23, x24, \op, 5 729 __frame_regs x25, x26, \op, 7 730 __frame_regs x27, x28, \op, 9 731 732 .ifc \op, ld 733 .if .Lframe_regcount == -1 734 .error "frame_push/frame_pop may not be nested" 735 .endif 736 ldp x29, x30, [sp], #.Lframe_local_offset + .Lframe_extra 737 .set .Lframe_regcount, -1 738 .endif 739 .endm 740 741 /* 742 * Set SCTLR_ELx to the @reg value, and invalidate the local icache 743 * in the process. This is called when setting the MMU on. 744 */ 745 .macro set_sctlr, sreg, reg 746 msr \sreg, \reg 747 isb 748 /* 749 * Invalidate the local I-cache so that any instructions fetched 750 * speculatively from the PoC are discarded, since they may have 751 * been dynamically patched at the PoU. 752 */ 753 ic iallu 754 dsb nsh 755 isb 756 .endm 757 758 .macro set_sctlr_el1, reg 759 set_sctlr sctlr_el1, \reg 760 .endm 761 762 .macro set_sctlr_el2, reg 763 set_sctlr sctlr_el2, \reg 764 .endm 765 766 /* 767 * Check whether preempt/bh-disabled asm code should yield as soon as 768 * it is able. This is the case if we are currently running in task 769 * context, and either a softirq is pending, or the TIF_NEED_RESCHED 770 * flag is set and re-enabling preemption a single time would result in 771 * a preempt count of zero. (Note that the TIF_NEED_RESCHED flag is 772 * stored negated in the top word of the thread_info::preempt_count 773 * field) 774 */ 775 .macro cond_yield, lbl:req, tmp:req, tmp2:req 776 get_current_task \tmp 777 ldr \tmp, [\tmp, #TSK_TI_PREEMPT] 778 /* 779 * If we are serving a softirq, there is no point in yielding: the 780 * softirq will not be preempted no matter what we do, so we should 781 * run to completion as quickly as we can. 782 */ 783 tbnz \tmp, #SOFTIRQ_SHIFT, .Lnoyield_\@ 784 #ifdef CONFIG_PREEMPTION 785 sub \tmp, \tmp, #PREEMPT_DISABLE_OFFSET 786 cbz \tmp, \lbl 787 #endif 788 adr_l \tmp, irq_stat + IRQ_CPUSTAT_SOFTIRQ_PENDING 789 get_this_cpu_offset \tmp2 790 ldr w\tmp, [\tmp, \tmp2] 791 cbnz w\tmp, \lbl // yield on pending softirq in task context 792 .Lnoyield_\@: 793 .endm 794 795 /* 796 * Branch Target Identifier (BTI) 797 */ 798 .macro bti, targets 799 .equ .L__bti_targets_c, 34 800 .equ .L__bti_targets_j, 36 801 .equ .L__bti_targets_jc,38 802 hint #.L__bti_targets_\targets 803 .endm 804 805 /* 806 * This macro emits a program property note section identifying 807 * architecture features which require special handling, mainly for 808 * use in assembly files included in the VDSO. 809 */ 810 811 #define NT_GNU_PROPERTY_TYPE_0 5 812 #define GNU_PROPERTY_AARCH64_FEATURE_1_AND 0xc0000000 813 814 #define GNU_PROPERTY_AARCH64_FEATURE_1_BTI (1U << 0) 815 #define GNU_PROPERTY_AARCH64_FEATURE_1_PAC (1U << 1) 816 817 #ifdef CONFIG_ARM64_BTI_KERNEL 818 #define GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT \ 819 ((GNU_PROPERTY_AARCH64_FEATURE_1_BTI | \ 820 GNU_PROPERTY_AARCH64_FEATURE_1_PAC)) 821 #endif 822 823 #ifdef GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT 824 .macro emit_aarch64_feature_1_and, feat=GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT 825 .pushsection .note.gnu.property, "a" 826 .align 3 827 .long 2f - 1f 828 .long 6f - 3f 829 .long NT_GNU_PROPERTY_TYPE_0 830 1: .string "GNU" 831 2: 832 .align 3 833 3: .long GNU_PROPERTY_AARCH64_FEATURE_1_AND 834 .long 5f - 4f 835 4: 836 /* 837 * This is described with an array of char in the Linux API 838 * spec but the text and all other usage (including binutils, 839 * clang and GCC) treat this as a 32 bit value so no swizzling 840 * is required for big endian. 841 */ 842 .long \feat 843 5: 844 .align 3 845 6: 846 .popsection 847 .endm 848 849 #else 850 .macro emit_aarch64_feature_1_and, feat=0 851 .endm 852 853 #endif /* GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT */ 854 855 .macro __mitigate_spectre_bhb_loop tmp 856 #ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY 857 alternative_cb spectre_bhb_patch_loop_iter 858 mov \tmp, #32 // Patched to correct the immediate 859 alternative_cb_end 860 .Lspectre_bhb_loop\@: 861 b . + 4 862 subs \tmp, \tmp, #1 863 b.ne .Lspectre_bhb_loop\@ 864 sb 865 #endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */ 866 .endm 867 868 .macro mitigate_spectre_bhb_loop tmp 869 #ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY 870 alternative_cb spectre_bhb_patch_loop_mitigation_enable 871 b .L_spectre_bhb_loop_done\@ // Patched to NOP 872 alternative_cb_end 873 __mitigate_spectre_bhb_loop \tmp 874 .L_spectre_bhb_loop_done\@: 875 #endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */ 876 .endm 877 878 /* Save/restores x0-x3 to the stack */ 879 .macro __mitigate_spectre_bhb_fw 880 #ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY 881 stp x0, x1, [sp, #-16]! 882 stp x2, x3, [sp, #-16]! 883 mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3 884 alternative_cb smccc_patch_fw_mitigation_conduit 885 nop // Patched to SMC/HVC #0 886 alternative_cb_end 887 ldp x2, x3, [sp], #16 888 ldp x0, x1, [sp], #16 889 #endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */ 890 .endm 891 892 .macro mitigate_spectre_bhb_clear_insn 893 #ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY 894 alternative_cb spectre_bhb_patch_clearbhb 895 /* Patched to NOP when not supported */ 896 clearbhb 897 isb 898 alternative_cb_end 899 #endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */ 900 .endm 901 #endif /* __ASM_ASSEMBLER_H */ 902