xref: /openbmc/linux/arch/arm64/boot/dts/ti/k3-j721e.dtsi (revision bd75b4ef)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for J721E SoC Family
4 *
5 * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/pinctrl/k3.h>
11#include <dt-bindings/soc/ti,sci_pm_domain.h>
12
13/ {
14	model = "Texas Instruments K3 J721E SoC";
15	compatible = "ti,j721e";
16	interrupt-parent = <&gic500>;
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	aliases {
21		serial0 = &wkup_uart0;
22		serial1 = &mcu_uart0;
23		serial2 = &main_uart0;
24		serial3 = &main_uart1;
25		serial4 = &main_uart2;
26		serial5 = &main_uart3;
27		serial6 = &main_uart4;
28		serial7 = &main_uart5;
29		serial8 = &main_uart6;
30		serial9 = &main_uart7;
31		serial10 = &main_uart8;
32		serial11 = &main_uart9;
33		ethernet0 = &cpsw_port1;
34		mmc0 = &main_sdhci0;
35		mmc1 = &main_sdhci1;
36		mmc2 = &main_sdhci2;
37	};
38
39	chosen { };
40
41	cpus {
42		#address-cells = <1>;
43		#size-cells = <0>;
44		cpu-map {
45			cluster0: cluster0 {
46				core0 {
47					cpu = <&cpu0>;
48				};
49
50				core1 {
51					cpu = <&cpu1>;
52				};
53			};
54
55		};
56
57		cpu0: cpu@0 {
58			compatible = "arm,cortex-a72";
59			reg = <0x000>;
60			device_type = "cpu";
61			enable-method = "psci";
62			i-cache-size = <0xC000>;
63			i-cache-line-size = <64>;
64			i-cache-sets = <256>;
65			d-cache-size = <0x8000>;
66			d-cache-line-size = <64>;
67			d-cache-sets = <256>;
68			next-level-cache = <&L2_0>;
69		};
70
71		cpu1: cpu@1 {
72			compatible = "arm,cortex-a72";
73			reg = <0x001>;
74			device_type = "cpu";
75			enable-method = "psci";
76			i-cache-size = <0xC000>;
77			i-cache-line-size = <64>;
78			i-cache-sets = <256>;
79			d-cache-size = <0x8000>;
80			d-cache-line-size = <64>;
81			d-cache-sets = <256>;
82			next-level-cache = <&L2_0>;
83		};
84	};
85
86	L2_0: l2-cache0 {
87		compatible = "cache";
88		cache-level = <2>;
89		cache-size = <0x100000>;
90		cache-line-size = <64>;
91		cache-sets = <1024>;
92		next-level-cache = <&msmc_l3>;
93	};
94
95	msmc_l3: l3-cache0 {
96		compatible = "cache";
97		cache-level = <3>;
98	};
99
100	firmware {
101		optee {
102			compatible = "linaro,optee-tz";
103			method = "smc";
104		};
105
106		psci: psci {
107			compatible = "arm,psci-1.0";
108			method = "smc";
109		};
110	};
111
112	a72_timer0: timer-cl0-cpu0 {
113		compatible = "arm,armv8-timer";
114		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
115			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
116			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
117			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
118	};
119
120	pmu: pmu {
121		compatible = "arm,cortex-a72-pmu";
122		/* Recommendation from GIC500 TRM Table A.3 */
123		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
124	};
125
126	cbass_main: bus@100000 {
127		compatible = "simple-bus";
128		#address-cells = <2>;
129		#size-cells = <2>;
130		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
131			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
132			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
133			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
134			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
135			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
136			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
137			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
138			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/
139			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
140			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
141			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
142			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
143			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
144			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
145			 <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
146			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
147			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
148
149			 /* MCUSS_WKUP Range */
150			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
151			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
152			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
153			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
154			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
155			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
156			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
157			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
158			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
159			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
160			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
161			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
162			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
163
164		cbass_mcu_wakeup: bus@28380000 {
165			compatible = "simple-bus";
166			#address-cells = <2>;
167			#size-cells = <2>;
168			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
169				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
170				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
171				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
172				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
173				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
174				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
175				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
176				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
177				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
178				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
179				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
180				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
181		};
182	};
183};
184
185/* Now include the peripherals for each bus segments */
186#include "k3-j721e-main.dtsi"
187#include "k3-j721e-mcu-wakeup.dtsi"
188