1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (c) Siemens AG, 2018-2023
4 *
5 * Authors:
6 *   Chao Zeng <chao.zeng@siemens.com>
7 *   Jan Kiszka <jan.kiszka@siemens.com>
8 *
9 * AM6548-based (quad-core) IOT2050 M.2 variant (based on Advanced Product
10 * Generation 2), 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
11 *
12 * Product homepage:
13 * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
14 */
15
16#include "k3-am6548-iot2050-advanced-common.dtsi"
17#include "k3-am65-iot2050-common-pg2.dtsi"
18
19/ {
20	compatible = "siemens,iot2050-advanced-m2", "ti,am654";
21	model = "SIMATIC IOT2050 Advanced M2";
22};
23
24&mcu_r5fss0 {
25	/* lock-step mode not supported on this board */
26	ti,cluster-mode = <0>;
27};
28
29&main_pmx0 {
30	main_m2_enable_pins_default: main-m2-enable-default-pins {
31		pinctrl-single,pins = <
32			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
33		>;
34	};
35
36	main_bkey_pcie_reset: main-bkey-pcie-reset {
37		pinctrl-single,pins = <
38			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
39		>;
40	};
41
42	main_pmx0_m2_config_pins_default: main-pmx0-m2-config-default-pins {
43		pinctrl-single,pins = <
44			AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7)  /* (AE13) GPIO1_18 */
45			AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7)  /* (AD13) GPIO1_19 */
46		>;
47	};
48
49	main_m2_pcie_mux_control: main-m2-pcie-mux-control {
50		pinctrl-single,pins = <
51			AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7)  /* (AG22) GPIO0_82 */
52			AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7)  /* (AE20) GPIO0_88 */
53			AM65X_IOPAD(0x0164, PIN_INPUT_PULLUP, 7)  /* (AF19) GPIO0_89 */
54		>;
55	};
56};
57
58&main_pmx1 {
59	main_pmx1_m2_config_pins_default: main-pmx1-m2-config-default-pins {
60		pinctrl-single,pins = <
61			AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7)  /* (B22) GPIO1_88 */
62			AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7)  /* (C23) GPIO1_89 */
63		>;
64	};
65};
66
67&main_gpio0 {
68	pinctrl-names = "default";
69	pinctrl-0 =
70		<&main_m2_pcie_mux_control>,
71		<&arduino_io_d4_to_d9_pins_default>;
72};
73
74&main_gpio1 {
75	pinctrl-names = "default";
76	pinctrl-0 =
77		<&main_m2_enable_pins_default>,
78		<&main_pmx0_m2_config_pins_default>,
79		<&main_pmx1_m2_config_pins_default>,
80		<&cp2102n_reset_pin_default>;
81};
82
83/*
84 * Base configuration for B-key slot with PCIe x2, E-key with USB 2.0 only.
85 * Firmware switches to other modes via device tree overlays.
86 */
87
88&serdes0 {
89	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
90	assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
91};
92
93&pcie0_rc {
94	pinctrl-names = "default";
95	pinctrl-0 = <&main_bkey_pcie_reset>;
96
97	num-lanes = <2>;
98	phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
99	phy-names = "pcie-phy0","pcie-phy1";
100	reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
101	status = "okay";
102};
103
104&pcie1_rc {
105	status = "disabled";
106};
107
108&dwc3_0 {
109	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
110				 <&k3_clks 151 9>;  /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
111	/delete-property/ phys;
112	/delete-property/ phy-names;
113};
114
115&usb0 {
116	maximum-speed = "high-speed";
117	/delete-property/ snps,dis-u1-entry-quirk;
118	/delete-property/ snps,dis-u2-entry-quirk;
119};
120