1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include "k3-am654.dtsi" 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/net/ti-dp83867.h> 11 12/ { 13 compatible = "ti,am654-evm", "ti,am654"; 14 model = "Texas Instruments AM654 Base Board"; 15 16 chosen { 17 stdout-path = "serial2:115200n8"; 18 bootargs = "earlycon=ns16550a,mmio32,0x02800000"; 19 }; 20 21 memory@80000000 { 22 device_type = "memory"; 23 /* 4G RAM */ 24 reg = <0x00000000 0x80000000 0x00000000 0x80000000>, 25 <0x00000008 0x80000000 0x00000000 0x80000000>; 26 }; 27 28 reserved-memory { 29 #address-cells = <2>; 30 #size-cells = <2>; 31 ranges; 32 33 secure_ddr: secure-ddr@9e800000 { 34 reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ 35 alignment = <0x1000>; 36 no-map; 37 }; 38 39 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 40 compatible = "shared-dma-pool"; 41 reg = <0 0xa0000000 0 0x100000>; 42 no-map; 43 }; 44 45 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { 46 compatible = "shared-dma-pool"; 47 reg = <0 0xa0100000 0 0xf00000>; 48 no-map; 49 }; 50 51 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 52 compatible = "shared-dma-pool"; 53 reg = <0 0xa1000000 0 0x100000>; 54 no-map; 55 }; 56 57 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { 58 compatible = "shared-dma-pool"; 59 reg = <0 0xa1100000 0 0xf00000>; 60 no-map; 61 }; 62 63 rtos_ipc_memory_region: ipc-memories@a2000000 { 64 reg = <0x00 0xa2000000 0x00 0x00100000>; 65 alignment = <0x1000>; 66 no-map; 67 }; 68 }; 69 70 gpio-keys { 71 compatible = "gpio-keys"; 72 autorepeat; 73 pinctrl-names = "default"; 74 pinctrl-0 = <&push_button_pins_default>; 75 76 sw5 { 77 label = "GPIO Key USER1"; 78 linux,code = <BTN_0>; 79 gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; 80 }; 81 82 sw6 { 83 label = "GPIO Key USER2"; 84 linux,code = <BTN_1>; 85 gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; 86 }; 87 }; 88 89 clk_ov5640_fixed: clock { 90 compatible = "fixed-clock"; 91 #clock-cells = <0>; 92 clock-frequency = <24000000>; 93 }; 94}; 95 96&wkup_pmx0 { 97 wkup_i2c0_pins_default: wkup-i2c0-pins-default { 98 pinctrl-single,pins = < 99 AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ 100 AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ 101 >; 102 }; 103 104 push_button_pins_default: push-button-pins-default { 105 pinctrl-single,pins = < 106 AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ 107 AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ 108 >; 109 }; 110 111 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { 112 pinctrl-single,pins = < 113 AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ 114 AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ 115 AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ 116 AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ 117 AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ 118 AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ 119 AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ 120 AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ 121 AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ 122 AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ 123 AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ 124 >; 125 }; 126 127 wkup_pca554_default: wkup-pca554-default { 128 pinctrl-single,pins = < 129 AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ 130 >; 131 }; 132 133 mcu_cpsw_pins_default: mcu-cpsw-pins-default { 134 pinctrl-single,pins = < 135 AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ 136 AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ 137 AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */ 138 AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */ 139 AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */ 140 AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */ 141 AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */ 142 AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ 143 AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ 144 AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ 145 AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ 146 AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ 147 >; 148 }; 149 150 mcu_mdio_pins_default: mcu-mdio1-pins-default { 151 pinctrl-single,pins = < 152 AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ 153 AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ 154 >; 155 }; 156}; 157 158&main_pmx0 { 159 main_uart0_pins_default: main-uart0-pins-default { 160 pinctrl-single,pins = < 161 AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ 162 AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ 163 AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ 164 AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ 165 >; 166 }; 167 168 main_i2c2_pins_default: main-i2c2-pins-default { 169 pinctrl-single,pins = < 170 AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ 171 AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ 172 >; 173 }; 174 175 main_spi0_pins_default: main-spi0-pins-default { 176 pinctrl-single,pins = < 177 AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ 178 AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ 179 AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */ 180 AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ 181 >; 182 }; 183 184 main_mmc0_pins_default: main-mmc0-pins-default { 185 pinctrl-single,pins = < 186 AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ 187 AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ 188 AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ 189 AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ 190 AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ 191 AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ 192 AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ 193 AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ 194 AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ 195 AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ 196 AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ 197 AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ 198 >; 199 }; 200 201 main_mmc1_pins_default: main-mmc1-pins-default { 202 pinctrl-single,pins = < 203 AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ 204 AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ 205 AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ 206 AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ 207 AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ 208 AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ 209 AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ 210 AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ 211 >; 212 }; 213 214 usb1_pins_default: usb1-pins-default { 215 pinctrl-single,pins = < 216 AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ 217 >; 218 }; 219}; 220 221&main_pmx1 { 222 main_i2c0_pins_default: main-i2c0-pins-default { 223 pinctrl-single,pins = < 224 AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ 225 AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ 226 >; 227 }; 228 229 main_i2c1_pins_default: main-i2c1-pins-default { 230 pinctrl-single,pins = < 231 AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ 232 AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ 233 >; 234 }; 235 236 ecap0_pins_default: ecap0-pins-default { 237 pinctrl-single,pins = < 238 AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ 239 >; 240 }; 241}; 242 243&wkup_uart0 { 244 /* Wakeup UART is used by System firmware */ 245 status = "reserved"; 246}; 247 248&main_uart0 { 249 pinctrl-names = "default"; 250 pinctrl-0 = <&main_uart0_pins_default>; 251 power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; 252}; 253 254&wkup_i2c0 { 255 pinctrl-names = "default"; 256 pinctrl-0 = <&wkup_i2c0_pins_default>; 257 clock-frequency = <400000>; 258 259 pca9554: gpio@39 { 260 compatible = "nxp,pca9554"; 261 reg = <0x39>; 262 gpio-controller; 263 #gpio-cells = <2>; 264 pinctrl-names = "default"; 265 pinctrl-0 = <&wkup_pca554_default>; 266 interrupt-parent = <&wkup_gpio0>; 267 interrupts = <25 IRQ_TYPE_EDGE_FALLING>; 268 interrupt-controller; 269 #interrupt-cells = <2>; 270 }; 271}; 272 273&main_i2c0 { 274 pinctrl-names = "default"; 275 pinctrl-0 = <&main_i2c0_pins_default>; 276 clock-frequency = <400000>; 277 278 pca9555: gpio@21 { 279 compatible = "nxp,pca9555"; 280 reg = <0x21>; 281 gpio-controller; 282 #gpio-cells = <2>; 283 }; 284}; 285 286&main_i2c1 { 287 pinctrl-names = "default"; 288 pinctrl-0 = <&main_i2c1_pins_default>; 289 clock-frequency = <400000>; 290 291 ov5640: camera@3c { 292 compatible = "ovti,ov5640"; 293 reg = <0x3c>; 294 295 clocks = <&clk_ov5640_fixed>; 296 clock-names = "xclk"; 297 298 port { 299 csi2_cam0: endpoint { 300 remote-endpoint = <&csi2_phy0>; 301 clock-lanes = <0>; 302 data-lanes = <1 2>; 303 }; 304 }; 305 }; 306 307}; 308 309&main_i2c2 { 310 pinctrl-names = "default"; 311 pinctrl-0 = <&main_i2c2_pins_default>; 312 clock-frequency = <400000>; 313}; 314 315&ecap0 { 316 pinctrl-names = "default"; 317 pinctrl-0 = <&ecap0_pins_default>; 318}; 319 320&main_spi0 { 321 pinctrl-names = "default"; 322 pinctrl-0 = <&main_spi0_pins_default>; 323 #address-cells = <1>; 324 #size-cells= <0>; 325 ti,pindir-d0-out-d1-in = <1>; 326 327 flash@0{ 328 compatible = "jedec,spi-nor"; 329 reg = <0x0>; 330 spi-tx-bus-width = <1>; 331 spi-rx-bus-width = <1>; 332 spi-max-frequency = <48000000>; 333 #address-cells = <1>; 334 #size-cells= <1>; 335 }; 336}; 337 338&sdhci0 { 339 pinctrl-names = "default"; 340 pinctrl-0 = <&main_mmc0_pins_default>; 341 bus-width = <8>; 342 non-removable; 343 ti,driver-strength-ohm = <50>; 344 disable-wp; 345}; 346 347/* 348 * Because of erratas i2025 and i2026 for silicon revision 1.0, the 349 * SD card interface might fail. Boards with sr1.0 are recommended to 350 * disable sdhci1 351 */ 352&sdhci1 { 353 pinctrl-names = "default"; 354 pinctrl-0 = <&main_mmc1_pins_default>; 355 ti,driver-strength-ohm = <50>; 356 disable-wp; 357}; 358 359&usb1 { 360 pinctrl-names = "default"; 361 pinctrl-0 = <&usb1_pins_default>; 362 dr_mode = "otg"; 363}; 364 365&dwc3_0 { 366 status = "disabled"; 367}; 368 369&usb0_phy { 370 status = "disabled"; 371}; 372 373&tscadc0 { 374 adc { 375 ti,adc-channels = <0 1 2 3 4 5 6 7>; 376 }; 377}; 378 379&tscadc1 { 380 adc { 381 ti,adc-channels = <0 1 2 3 4 5 6 7>; 382 }; 383}; 384 385&serdes0 { 386 status = "disabled"; 387}; 388 389&serdes1 { 390 status = "disabled"; 391}; 392 393&pcie0_rc { 394 status = "disabled"; 395}; 396 397&pcie0_ep { 398 status = "disabled"; 399}; 400 401&pcie1_rc { 402 status = "disabled"; 403}; 404 405&pcie1_ep { 406 status = "disabled"; 407}; 408 409&mailbox0_cluster0 { 410 interrupts = <436>; 411 412 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { 413 ti,mbox-tx = <1 0 0>; 414 ti,mbox-rx = <0 0 0>; 415 }; 416}; 417 418&mailbox0_cluster1 { 419 interrupts = <432>; 420 421 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { 422 ti,mbox-tx = <1 0 0>; 423 ti,mbox-rx = <0 0 0>; 424 }; 425}; 426 427&mailbox0_cluster2 { 428 status = "disabled"; 429}; 430 431&mailbox0_cluster3 { 432 status = "disabled"; 433}; 434 435&mailbox0_cluster4 { 436 status = "disabled"; 437}; 438 439&mailbox0_cluster5 { 440 status = "disabled"; 441}; 442 443&mailbox0_cluster6 { 444 status = "disabled"; 445}; 446 447&mailbox0_cluster7 { 448 status = "disabled"; 449}; 450 451&mailbox0_cluster8 { 452 status = "disabled"; 453}; 454 455&mailbox0_cluster9 { 456 status = "disabled"; 457}; 458 459&mailbox0_cluster10 { 460 status = "disabled"; 461}; 462 463&mailbox0_cluster11 { 464 status = "disabled"; 465}; 466 467&mcu_r5fss0_core0 { 468 memory-region = <&mcu_r5fss0_core0_dma_memory_region>, 469 <&mcu_r5fss0_core0_memory_region>; 470 mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; 471}; 472 473&mcu_r5fss0_core1 { 474 memory-region = <&mcu_r5fss0_core1_dma_memory_region>, 475 <&mcu_r5fss0_core1_memory_region>; 476 mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; 477}; 478 479&ospi0 { 480 pinctrl-names = "default"; 481 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; 482 483 flash@0{ 484 compatible = "jedec,spi-nor"; 485 reg = <0x0>; 486 spi-tx-bus-width = <8>; 487 spi-rx-bus-width = <8>; 488 spi-max-frequency = <25000000>; 489 cdns,tshsl-ns = <60>; 490 cdns,tsd2d-ns = <60>; 491 cdns,tchsh-ns = <60>; 492 cdns,tslch-ns = <60>; 493 cdns,read-delay = <0>; 494 #address-cells = <1>; 495 #size-cells = <1>; 496 }; 497}; 498 499&csi2_0 { 500 csi2_phy0: endpoint { 501 remote-endpoint = <&csi2_cam0>; 502 clock-lanes = <0>; 503 data-lanes = <1 2>; 504 }; 505}; 506 507&mcu_cpsw { 508 pinctrl-names = "default"; 509 pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; 510}; 511 512&davinci_mdio { 513 phy0: ethernet-phy@0 { 514 reg = <0>; 515 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 516 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 517 }; 518}; 519 520&cpsw_port1 { 521 phy-mode = "rgmii-rxid"; 522 phy-handle = <&phy0>; 523}; 524 525&mcasp0 { 526 status = "disabled"; 527}; 528 529&mcasp1 { 530 status = "disabled"; 531}; 532 533&mcasp2 { 534 status = "disabled"; 535}; 536 537&dss { 538 status = "disabled"; 539}; 540