1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/mux/ti-serdes.h>
9#include <dt-bindings/phy/phy.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/net/ti-dp83867.h>
12#include <dt-bindings/leds/common.h>
13#include "k3-am642.dtsi"
14
15/ {
16	compatible = "ti,am642-sk", "ti,am642";
17	model = "Texas Instruments AM642 SK";
18
19	chosen {
20		stdout-path = "serial2:115200n8";
21		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
22	};
23
24	memory@80000000 {
25		device_type = "memory";
26		/* 2G RAM */
27		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
28
29	};
30
31	reserved-memory {
32		#address-cells = <2>;
33		#size-cells = <2>;
34		ranges;
35
36		secure_ddr: optee@9e800000 {
37			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
38			alignment = <0x1000>;
39			no-map;
40		};
41
42		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
43			compatible = "shared-dma-pool";
44			reg = <0x00 0xa0000000 0x00 0x100000>;
45			no-map;
46		};
47
48		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
49			compatible = "shared-dma-pool";
50			reg = <0x00 0xa0100000 0x00 0xf00000>;
51			no-map;
52		};
53
54		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
55			compatible = "shared-dma-pool";
56			reg = <0x00 0xa1000000 0x00 0x100000>;
57			no-map;
58		};
59
60		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
61			compatible = "shared-dma-pool";
62			reg = <0x00 0xa1100000 0x00 0xf00000>;
63			no-map;
64		};
65
66		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
67			compatible = "shared-dma-pool";
68			reg = <0x00 0xa2000000 0x00 0x100000>;
69			no-map;
70		};
71
72		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
73			compatible = "shared-dma-pool";
74			reg = <0x00 0xa2100000 0x00 0xf00000>;
75			no-map;
76		};
77
78		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
79			compatible = "shared-dma-pool";
80			reg = <0x00 0xa3000000 0x00 0x100000>;
81			no-map;
82		};
83
84		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
85			compatible = "shared-dma-pool";
86			reg = <0x00 0xa3100000 0x00 0xf00000>;
87			no-map;
88		};
89
90		rtos_ipc_memory_region: ipc-memories@a5000000 {
91			reg = <0x00 0xa5000000 0x00 0x00800000>;
92			alignment = <0x1000>;
93			no-map;
94		};
95	};
96
97	vusb_main: fixed-regulator-vusb-main5v0 {
98		/* USB MAIN INPUT 5V DC */
99		compatible = "regulator-fixed";
100		regulator-name = "vusb_main5v0";
101		regulator-min-microvolt = <5000000>;
102		regulator-max-microvolt = <5000000>;
103		regulator-always-on;
104		regulator-boot-on;
105	};
106
107	vcc_3v3_sys: fixedregulator-vcc-3v3-sys {
108		/* output of LP8733xx */
109		compatible = "regulator-fixed";
110		regulator-name = "vcc_3v3_sys";
111		regulator-min-microvolt = <3300000>;
112		regulator-max-microvolt = <3300000>;
113		vin-supply = <&vusb_main>;
114		regulator-always-on;
115		regulator-boot-on;
116	};
117
118	vdd_mmc1: fixed-regulator-sd {
119		/* TPS2051BD */
120		compatible = "regulator-fixed";
121		regulator-name = "vdd_mmc1";
122		regulator-min-microvolt = <3300000>;
123		regulator-max-microvolt = <3300000>;
124		regulator-boot-on;
125		enable-active-high;
126		vin-supply = <&vcc_3v3_sys>;
127		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
128	};
129
130	com8_ls_en: regulator-1 {
131		compatible = "regulator-fixed";
132		regulator-name = "com8_ls_en";
133		regulator-min-microvolt = <3300000>;
134		regulator-max-microvolt = <3300000>;
135		regulator-always-on;
136		regulator-boot-on;
137		pinctrl-0 = <&main_com8_ls_en_pins_default>;
138		pinctrl-names = "default";
139		gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>;
140	};
141
142	wlan_en: regulator-2 {
143		/* output of SN74AVC4T245RSVR */
144		compatible = "regulator-fixed";
145		regulator-name = "wlan_en";
146		regulator-min-microvolt = <1800000>;
147		regulator-max-microvolt = <1800000>;
148		enable-active-high;
149		pinctrl-0 = <&main_wlan_en_pins_default>;
150		pinctrl-names = "default";
151		vin-supply = <&com8_ls_en>;
152		gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
153	};
154
155	led-controller {
156		compatible = "gpio-leds";
157
158		led-0 {
159			color = <LED_COLOR_ID_GREEN>;
160			function = LED_FUNCTION_INDICATOR;
161			function-enumerator = <1>;
162			gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
163			default-state = "off";
164		};
165
166		led-1 {
167			color = <LED_COLOR_ID_RED>;
168			function = LED_FUNCTION_INDICATOR;
169			function-enumerator = <2>;
170			gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
171			default-state = "off";
172		};
173
174		led-2 {
175			color = <LED_COLOR_ID_GREEN>;
176			function = LED_FUNCTION_INDICATOR;
177			function-enumerator = <3>;
178			gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
179			default-state = "off";
180		};
181
182		led-3 {
183			color = <LED_COLOR_ID_AMBER>;
184			function = LED_FUNCTION_INDICATOR;
185			function-enumerator = <4>;
186			gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
187			default-state = "off";
188		};
189
190		led-4 {
191			color = <LED_COLOR_ID_GREEN>;
192			function = LED_FUNCTION_INDICATOR;
193			function-enumerator = <5>;
194			gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
195			default-state = "off";
196		};
197
198		led-5 {
199			color = <LED_COLOR_ID_RED>;
200			function = LED_FUNCTION_INDICATOR;
201			function-enumerator = <6>;
202			gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
203			default-state = "off";
204		};
205
206		led-6 {
207			color = <LED_COLOR_ID_GREEN>;
208			function = LED_FUNCTION_INDICATOR;
209			function-enumerator = <7>;
210			gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
211			default-state = "off";
212		};
213
214		led-7 {
215			color = <LED_COLOR_ID_AMBER>;
216			function = LED_FUNCTION_HEARTBEAT;
217			function-enumerator = <8>;
218			linux,default-trigger = "heartbeat";
219			gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
220		};
221	};
222};
223
224&main_pmx0 {
225	main_mmc1_pins_default: main-mmc1-pins-default {
226		pinctrl-single,pins = <
227			AM64X_IOPAD(0x0294, PIN_INPUT, 0) /* (J19) MMC1_CMD */
228			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */
229			AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* (L20) MMC1_CLK */
230			AM64X_IOPAD(0x0288, PIN_INPUT, 0) /* (K21) MMC1_DAT0 */
231			AM64X_IOPAD(0x0284, PIN_INPUT, 0) /* (L21) MMC1_DAT1 */
232			AM64X_IOPAD(0x0280, PIN_INPUT, 0) /* (K19) MMC1_DAT2 */
233			AM64X_IOPAD(0x027c, PIN_INPUT, 0) /* (K18) MMC1_DAT3 */
234			AM64X_IOPAD(0x0298, PIN_INPUT, 0) /* (D19) MMC1_SDCD */
235		>;
236	};
237
238	main_uart0_pins_default: main-uart0-pins-default {
239		pinctrl-single,pins = <
240			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
241			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
242			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
243			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
244		>;
245	};
246
247	main_usb0_pins_default: main-usb0-pins-default {
248		pinctrl-single,pins = <
249			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
250		>;
251	};
252
253	main_i2c1_pins_default: main-i2c1-pins-default {
254		pinctrl-single,pins = <
255			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
256			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
257		>;
258	};
259
260	mdio1_pins_default: mdio1-pins-default {
261		pinctrl-single,pins = <
262			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
263			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
264		>;
265	};
266
267	rgmii1_pins_default: rgmii1-pins-default {
268		pinctrl-single,pins = <
269			AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */
270			AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */
271			AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */
272			AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */
273			AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */
274			AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */
275			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
276			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
277			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
278			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
279			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
280			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
281		>;
282	};
283
284       rgmii2_pins_default: rgmii2-pins-default {
285		pinctrl-single,pins = <
286			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
287			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
288			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
289			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
290			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
291			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
292			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
293			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
294			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
295			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
296			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
297			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
298		>;
299	};
300
301	ospi0_pins_default: ospi0-pins-default {
302		pinctrl-single,pins = <
303			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
304			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
305			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
306			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
307			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
308			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
309			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
310			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
311			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
312			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
313			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
314		>;
315	};
316
317	main_ecap0_pins_default: main-ecap0-pins-default {
318		pinctrl-single,pins = <
319			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
320		>;
321	};
322	main_wlan_en_pins_default: main-wlan-en-pins-default {
323		pinctrl-single,pins = <
324			AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */
325		>;
326	};
327
328	main_com8_ls_en_pins_default: main-com8-ls-en-pins-default {
329		pinctrl-single,pins = <
330			AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */
331		>;
332	};
333
334	main_wlan_pins_default: main-wlan-pins-default {
335		pinctrl-single,pins = <
336			AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
337		>;
338	};
339};
340
341&mcu_uart0 {
342	status = "disabled";
343};
344
345&mcu_uart1 {
346	status = "disabled";
347};
348
349&main_uart0 {
350	pinctrl-names = "default";
351	pinctrl-0 = <&main_uart0_pins_default>;
352};
353
354&main_uart1 {
355	/* main_uart1 is reserved for firmware usage */
356	status = "reserved";
357};
358
359&main_uart2 {
360	status = "disabled";
361};
362
363&main_uart3 {
364	status = "disabled";
365};
366
367&main_uart4 {
368	status = "disabled";
369};
370
371&main_uart5 {
372	status = "disabled";
373};
374
375&main_uart6 {
376	status = "disabled";
377};
378
379&mcu_i2c0 {
380	status = "disabled";
381};
382
383&mcu_i2c1 {
384	status = "disabled";
385};
386
387&main_i2c1 {
388	pinctrl-names = "default";
389	pinctrl-0 = <&main_i2c1_pins_default>;
390	clock-frequency = <400000>;
391
392	exp1: gpio@70 {
393		compatible = "nxp,pca9538";
394		reg = <0x70>;
395		gpio-controller;
396		#gpio-cells = <2>;
397		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
398				  "PRU_DETECT", "MMC1_SD_EN",
399				  "VPP_LDO_EN", "RPI_PS_3V3_En",
400				  "RPI_PS_5V0_En", "RPI_HAT_DETECT";
401	};
402
403	exp2: gpio@60 {
404		compatible = "ti,tpic2810";
405		reg = <0x60>;
406		gpio-controller;
407		#gpio-cells = <2>;
408		gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
409	};
410};
411
412&main_i2c3 {
413	status = "disabled";
414};
415
416&mcu_spi0 {
417	status = "disabled";
418};
419
420&mcu_spi1 {
421	status = "disabled";
422};
423
424/* mcu_gpio0 is reserved for mcu firmware usage */
425&mcu_gpio0 {
426	status = "reserved";
427};
428
429&sdhci0 {
430	vmmc-supply = <&wlan_en>;
431	bus-width = <4>;
432	non-removable;
433	cap-power-off-card;
434	keep-power-in-suspend;
435	ti,driver-strength-ohm = <50>;
436
437	#address-cells = <1>;
438	#size-cells = <0>;
439	wlcore: wlcore@2 {
440		compatible = "ti,wl1837";
441		reg = <2>;
442		pinctrl-0 = <&main_wlan_pins_default>;
443		pinctrl-names = "default";
444		interrupt-parent = <&main_gpio0>;
445		interrupts = <46 IRQ_TYPE_EDGE_FALLING>;
446	};
447};
448
449&sdhci1 {
450	/* SD/MMC */
451	vmmc-supply = <&vdd_mmc1>;
452	pinctrl-names = "default";
453	bus-width = <4>;
454	pinctrl-0 = <&main_mmc1_pins_default>;
455	ti,driver-strength-ohm = <50>;
456	disable-wp;
457};
458
459&serdes_ln_ctrl {
460	idle-states = <AM64_SERDES0_LANE0_USB>;
461};
462
463&serdes0 {
464	serdes0_usb_link: phy@0 {
465		reg = <0>;
466		cdns,num-lanes = <1>;
467		#phy-cells = <0>;
468		cdns,phy-type = <PHY_TYPE_USB3>;
469		resets = <&serdes_wiz0 1>;
470	};
471};
472
473&usbss0 {
474	ti,vbus-divider;
475};
476
477&usb0 {
478	dr_mode = "host";
479	maximum-speed = "super-speed";
480	pinctrl-names = "default";
481	pinctrl-0 = <&main_usb0_pins_default>;
482	phys = <&serdes0_usb_link>;
483	phy-names = "cdns3,usb3-phy";
484};
485
486&cpsw3g {
487	pinctrl-names = "default";
488	pinctrl-0 = <&mdio1_pins_default
489		     &rgmii1_pins_default
490		     &rgmii2_pins_default>;
491};
492
493&cpsw_port1 {
494	phy-mode = "rgmii-rxid";
495	phy-handle = <&cpsw3g_phy0>;
496};
497
498&cpsw_port2 {
499	phy-mode = "rgmii-rxid";
500	phy-handle = <&cpsw3g_phy1>;
501};
502
503&cpsw3g_mdio {
504	cpsw3g_phy0: ethernet-phy@0 {
505		reg = <0>;
506		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
507		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
508	};
509
510	cpsw3g_phy1: ethernet-phy@1 {
511		reg = <1>;
512		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
513		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
514	};
515};
516
517&tscadc0 {
518	status = "disabled";
519};
520
521&ospi0 {
522	pinctrl-names = "default";
523	pinctrl-0 = <&ospi0_pins_default>;
524
525	flash@0 {
526		compatible = "jedec,spi-nor";
527		reg = <0x0>;
528		spi-tx-bus-width = <8>;
529		spi-rx-bus-width = <8>;
530		spi-max-frequency = <25000000>;
531		cdns,tshsl-ns = <60>;
532		cdns,tsd2d-ns = <60>;
533		cdns,tchsh-ns = <60>;
534		cdns,tslch-ns = <60>;
535		cdns,read-delay = <4>;
536	};
537};
538
539&mailbox0_cluster2 {
540	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
541		ti,mbox-rx = <0 0 2>;
542		ti,mbox-tx = <1 0 2>;
543	};
544
545	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
546		ti,mbox-rx = <2 0 2>;
547		ti,mbox-tx = <3 0 2>;
548	};
549};
550
551&mailbox0_cluster3 {
552	status = "disabled";
553};
554
555&mailbox0_cluster4 {
556	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
557		ti,mbox-rx = <0 0 2>;
558		ti,mbox-tx = <1 0 2>;
559	};
560
561	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
562		ti,mbox-rx = <2 0 2>;
563		ti,mbox-tx = <3 0 2>;
564	};
565};
566
567&mailbox0_cluster5 {
568	status = "disabled";
569};
570
571&mailbox0_cluster6 {
572	mbox_m4_0: mbox-m4-0 {
573		ti,mbox-rx = <0 0 2>;
574		ti,mbox-tx = <1 0 2>;
575	};
576};
577
578&mailbox0_cluster7 {
579	status = "disabled";
580};
581
582&main_r5fss0_core0 {
583	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
584	memory-region = <&main_r5fss0_core0_dma_memory_region>,
585			<&main_r5fss0_core0_memory_region>;
586};
587
588&main_r5fss0_core1 {
589	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
590	memory-region = <&main_r5fss0_core1_dma_memory_region>,
591			<&main_r5fss0_core1_memory_region>;
592};
593
594&main_r5fss1_core0 {
595	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
596	memory-region = <&main_r5fss1_core0_dma_memory_region>,
597			<&main_r5fss1_core0_memory_region>;
598};
599
600&main_r5fss1_core1 {
601	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
602	memory-region = <&main_r5fss1_core1_dma_memory_region>,
603			<&main_r5fss1_core1_memory_region>;
604};
605
606&pcie0_rc {
607	status = "disabled";
608};
609
610&pcie0_ep {
611	status = "disabled";
612};
613
614&ecap0 {
615	/* PWM is available on Pin 1 of header J3 */
616	pinctrl-names = "default";
617	pinctrl-0 = <&main_ecap0_pins_default>;
618};
619
620&ecap1 {
621	status = "disabled";
622};
623
624&ecap2 {
625	status = "disabled";
626};
627
628&epwm0 {
629	status = "disabled";
630};
631
632&epwm1 {
633	status = "disabled";
634};
635
636&epwm2 {
637	status = "disabled";
638};
639
640&epwm3 {
641	status = "disabled";
642};
643
644&epwm4 {
645	/*
646	 * EPWM4_A, EPWM4_B is available on Pin 32 and 33 on J4 (RPi hat)
647	 * But RPi Hat will be used for other use cases, so marking epwm4 as disabled.
648	 */
649	status = "disabled";
650};
651
652&epwm5 {
653	/*
654	 * EPWM5_A, EPWM5_B is available on Pin 29 and 31 on J4 (RPi hat)
655	 * But RPi Hat will be used for other use cases, so marking epwm5 as disabled.
656	 */
657	status = "disabled";
658};
659
660&epwm6 {
661	status = "disabled";
662};
663
664&epwm7 {
665	status = "disabled";
666};
667
668&epwm8 {
669	status = "disabled";
670};
671
672&icssg0_mdio {
673	status = "disabled";
674};
675
676&icssg1_mdio {
677	status = "disabled";
678};
679
680&main_mcan0 {
681	status = "disabled";
682};
683
684&main_mcan1 {
685	status = "disabled";
686};
687
688&gpmc0 {
689	status = "disabled";
690};
691
692&elm0 {
693	status = "disabled";
694};
695