1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright (C) 2015 Marvell Technology Group Ltd.
4 *
5 * Author: Jisheng Zhang <jszhang@marvell.com>
6 */
7
8#include <dt-bindings/interrupt-controller/arm-gic.h>
9
10/ {
11	compatible = "marvell,berlin4ct", "marvell,berlin";
12	interrupt-parent = <&gic>;
13	#address-cells = <2>;
14	#size-cells = <2>;
15
16	aliases {
17		serial0 = &uart0;
18	};
19
20	psci {
21		compatible = "arm,psci-1.0", "arm,psci-0.2";
22		method = "smc";
23	};
24
25	cpus {
26		#address-cells = <1>;
27		#size-cells = <0>;
28
29		cpu0: cpu@0 {
30			compatible = "arm,cortex-a53";
31			device_type = "cpu";
32			reg = <0x0>;
33			enable-method = "psci";
34			next-level-cache = <&l2>;
35			cpu-idle-states = <&CPU_SLEEP_0>;
36		};
37
38		cpu1: cpu@1 {
39			compatible = "arm,cortex-a53";
40			device_type = "cpu";
41			reg = <0x1>;
42			enable-method = "psci";
43			next-level-cache = <&l2>;
44			cpu-idle-states = <&CPU_SLEEP_0>;
45		};
46
47		cpu2: cpu@2 {
48			compatible = "arm,cortex-a53";
49			device_type = "cpu";
50			reg = <0x2>;
51			enable-method = "psci";
52			next-level-cache = <&l2>;
53			cpu-idle-states = <&CPU_SLEEP_0>;
54		};
55
56		cpu3: cpu@3 {
57			compatible = "arm,cortex-a53";
58			device_type = "cpu";
59			reg = <0x3>;
60			enable-method = "psci";
61			next-level-cache = <&l2>;
62			cpu-idle-states = <&CPU_SLEEP_0>;
63		};
64
65		l2: cache {
66			compatible = "cache";
67		};
68
69		idle-states {
70			entry-method = "psci";
71			CPU_SLEEP_0: cpu-sleep-0 {
72				compatible = "arm,idle-state";
73				local-timer-stop;
74				arm,psci-suspend-param = <0x0010000>;
75				entry-latency-us = <75>;
76				exit-latency-us = <155>;
77				min-residency-us = <1000>;
78			};
79		};
80	};
81
82	osc: osc {
83		compatible = "fixed-clock";
84		#clock-cells = <0>;
85		clock-frequency = <25000000>;
86	};
87
88	pmu {
89		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
90		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
91			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
92			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
93			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
94		interrupt-affinity = <&cpu0>,
95				     <&cpu1>,
96				     <&cpu2>,
97				     <&cpu3>;
98	};
99
100	timer {
101		compatible = "arm,armv8-timer";
102		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
103			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
104			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
105			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
106	};
107
108	soc@f7000000 {
109		compatible = "simple-bus";
110		#address-cells = <1>;
111		#size-cells = <1>;
112		ranges = <0 0 0xf7000000 0x1000000>;
113
114		gic: interrupt-controller@901000 {
115			compatible = "arm,gic-400";
116			#interrupt-cells = <3>;
117			interrupt-controller;
118			reg = <0x901000 0x1000>,
119			      <0x902000 0x2000>,
120			      <0x904000 0x2000>,
121			      <0x906000 0x2000>;
122			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
123		};
124
125		apb@e80000 {
126			compatible = "simple-bus";
127			#address-cells = <1>;
128			#size-cells = <1>;
129
130			ranges = <0 0xe80000 0x10000>;
131			interrupt-parent = <&aic>;
132
133			gpio0: gpio@400 {
134				compatible = "snps,dw-apb-gpio";
135				reg = <0x0400 0x400>;
136				#address-cells = <1>;
137				#size-cells = <0>;
138
139				porta: gpio-port@0 {
140					compatible = "snps,dw-apb-gpio-port";
141					gpio-controller;
142					#gpio-cells = <2>;
143					snps,nr-gpios = <32>;
144					reg = <0>;
145					interrupt-controller;
146					#interrupt-cells = <2>;
147					interrupts = <0>;
148				};
149			};
150
151			gpio1: gpio@800 {
152				compatible = "snps,dw-apb-gpio";
153				reg = <0x0800 0x400>;
154				#address-cells = <1>;
155				#size-cells = <0>;
156
157				portb: gpio-port@1 {
158					compatible = "snps,dw-apb-gpio-port";
159					gpio-controller;
160					#gpio-cells = <2>;
161					snps,nr-gpios = <32>;
162					reg = <0>;
163					interrupt-controller;
164					#interrupt-cells = <2>;
165					interrupts = <1>;
166				};
167			};
168
169			gpio2: gpio@c00 {
170				compatible = "snps,dw-apb-gpio";
171				reg = <0x0c00 0x400>;
172				#address-cells = <1>;
173				#size-cells = <0>;
174
175				portc: gpio-port@2 {
176					compatible = "snps,dw-apb-gpio-port";
177					gpio-controller;
178					#gpio-cells = <2>;
179					snps,nr-gpios = <32>;
180					reg = <0>;
181					interrupt-controller;
182					#interrupt-cells = <2>;
183					interrupts = <2>;
184				};
185			};
186
187			gpio3: gpio@1000 {
188				compatible = "snps,dw-apb-gpio";
189				reg = <0x1000 0x400>;
190				#address-cells = <1>;
191				#size-cells = <0>;
192
193				portd: gpio-port@3 {
194					compatible = "snps,dw-apb-gpio-port";
195					gpio-controller;
196					#gpio-cells = <2>;
197					snps,nr-gpios = <32>;
198					reg = <0>;
199					interrupt-controller;
200					#interrupt-cells = <2>;
201					interrupts = <3>;
202				};
203			};
204
205			aic: interrupt-controller@3800 {
206				compatible = "snps,dw-apb-ictl";
207				reg = <0x3800 0x30>;
208				interrupt-controller;
209				#interrupt-cells = <1>;
210				interrupt-parent = <&gic>;
211				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
212			};
213		};
214
215		soc_pinctrl: pin-controller@ea8000 {
216			compatible = "marvell,berlin4ct-soc-pinctrl";
217			reg = <0xea8000 0x14>;
218		};
219
220		avio_pinctrl: pin-controller@ea8400 {
221			compatible = "marvell,berlin4ct-avio-pinctrl";
222			reg = <0xea8400 0x8>;
223		};
224
225		apb@fc0000 {
226			compatible = "simple-bus";
227			#address-cells = <1>;
228			#size-cells = <1>;
229			ranges = <0 0xfc0000 0x10000>;
230			interrupt-parent = <&sic>;
231
232			sic: interrupt-controller@1000 {
233				compatible = "snps,dw-apb-ictl";
234				reg = <0x1000 0x30>;
235				interrupt-controller;
236				#interrupt-cells = <1>;
237				interrupt-parent = <&gic>;
238				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
239			};
240
241			wdt0: watchdog@3000 {
242				compatible = "snps,dw-wdt";
243				reg = <0x3000 0x100>;
244				clocks = <&osc>;
245				interrupts = <0>;
246			};
247
248			wdt1: watchdog@4000 {
249				compatible = "snps,dw-wdt";
250				reg = <0x4000 0x100>;
251				clocks = <&osc>;
252				interrupts = <1>;
253			};
254
255			wdt2: watchdog@5000 {
256				compatible = "snps,dw-wdt";
257				reg = <0x5000 0x100>;
258				clocks = <&osc>;
259				interrupts = <2>;
260			};
261
262			sm_gpio0: gpio@8000 {
263				compatible = "snps,dw-apb-gpio";
264				reg = <0x8000 0x400>;
265				#address-cells = <1>;
266				#size-cells = <0>;
267
268				porte: gpio-port@4 {
269					compatible = "snps,dw-apb-gpio-port";
270					gpio-controller;
271					#gpio-cells = <2>;
272					snps,nr-gpios = <32>;
273					reg = <0>;
274				};
275			};
276
277			sm_gpio1: gpio@9000 {
278				compatible = "snps,dw-apb-gpio";
279				reg = <0x9000 0x400>;
280				#address-cells = <1>;
281				#size-cells = <0>;
282
283				portf: gpio-port@5 {
284					compatible = "snps,dw-apb-gpio-port";
285					gpio-controller;
286					#gpio-cells = <2>;
287					snps,nr-gpios = <32>;
288					reg = <0>;
289				};
290			};
291
292			uart0: uart@d000 {
293				compatible = "snps,dw-apb-uart";
294				reg = <0xd000 0x100>;
295				interrupts = <8>;
296				clocks = <&osc>;
297				reg-shift = <2>;
298				status = "disabled";
299				pinctrl-0 = <&uart0_pmux>;
300				pinctrl-names = "default";
301			};
302		};
303
304		system_pinctrl: pin-controller@fe2200 {
305			compatible = "marvell,berlin4ct-system-pinctrl";
306			reg = <0xfe2200 0xc>;
307
308			uart0_pmux: uart0-pmux {
309				groups = "SM_URT0_TXD", "SM_URT0_RXD";
310				function = "uart0";
311			};
312		};
313	};
314};
315