1// SPDX-License-Identifier: GPL-2.0+ OR MIT 2// 3// Device Tree Source for UniPhier PXs3 SoC 4// 5// Copyright (C) 2017 Socionext Inc. 6// Author: Masahiro Yamada <yamada.masahiro@socionext.com> 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/gpio/uniphier-gpio.h> 10 11/ { 12 compatible = "socionext,uniphier-pxs3"; 13 #address-cells = <2>; 14 #size-cells = <2>; 15 interrupt-parent = <&gic>; 16 17 cpus { 18 #address-cells = <2>; 19 #size-cells = <0>; 20 21 cpu-map { 22 cluster0 { 23 core0 { 24 cpu = <&cpu0>; 25 }; 26 core1 { 27 cpu = <&cpu1>; 28 }; 29 core2 { 30 cpu = <&cpu2>; 31 }; 32 core3 { 33 cpu = <&cpu3>; 34 }; 35 }; 36 }; 37 38 cpu0: cpu@0 { 39 device_type = "cpu"; 40 compatible = "arm,cortex-a53"; 41 reg = <0 0x000>; 42 clocks = <&sys_clk 33>; 43 enable-method = "psci"; 44 operating-points-v2 = <&cluster0_opp>; 45 }; 46 47 cpu1: cpu@1 { 48 device_type = "cpu"; 49 compatible = "arm,cortex-a53"; 50 reg = <0 0x001>; 51 clocks = <&sys_clk 33>; 52 enable-method = "psci"; 53 operating-points-v2 = <&cluster0_opp>; 54 }; 55 56 cpu2: cpu@2 { 57 device_type = "cpu"; 58 compatible = "arm,cortex-a53"; 59 reg = <0 0x002>; 60 clocks = <&sys_clk 33>; 61 enable-method = "psci"; 62 operating-points-v2 = <&cluster0_opp>; 63 }; 64 65 cpu3: cpu@3 { 66 device_type = "cpu"; 67 compatible = "arm,cortex-a53"; 68 reg = <0 0x003>; 69 clocks = <&sys_clk 33>; 70 enable-method = "psci"; 71 operating-points-v2 = <&cluster0_opp>; 72 }; 73 }; 74 75 cluster0_opp: opp-table { 76 compatible = "operating-points-v2"; 77 opp-shared; 78 79 opp-250000000 { 80 opp-hz = /bits/ 64 <250000000>; 81 clock-latency-ns = <300>; 82 }; 83 opp-325000000 { 84 opp-hz = /bits/ 64 <325000000>; 85 clock-latency-ns = <300>; 86 }; 87 opp-500000000 { 88 opp-hz = /bits/ 64 <500000000>; 89 clock-latency-ns = <300>; 90 }; 91 opp-650000000 { 92 opp-hz = /bits/ 64 <650000000>; 93 clock-latency-ns = <300>; 94 }; 95 opp-666667000 { 96 opp-hz = /bits/ 64 <666667000>; 97 clock-latency-ns = <300>; 98 }; 99 opp-866667000 { 100 opp-hz = /bits/ 64 <866667000>; 101 clock-latency-ns = <300>; 102 }; 103 opp-1000000000 { 104 opp-hz = /bits/ 64 <1000000000>; 105 clock-latency-ns = <300>; 106 }; 107 opp-1300000000 { 108 opp-hz = /bits/ 64 <1300000000>; 109 clock-latency-ns = <300>; 110 }; 111 }; 112 113 psci { 114 compatible = "arm,psci-1.0"; 115 method = "smc"; 116 }; 117 118 clocks { 119 refclk: ref { 120 compatible = "fixed-clock"; 121 #clock-cells = <0>; 122 clock-frequency = <25000000>; 123 }; 124 }; 125 126 emmc_pwrseq: emmc-pwrseq { 127 compatible = "mmc-pwrseq-emmc"; 128 reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>; 129 }; 130 131 timer { 132 compatible = "arm,armv8-timer"; 133 interrupts = <1 13 4>, 134 <1 14 4>, 135 <1 11 4>, 136 <1 10 4>; 137 }; 138 139 reserved-memory { 140 #address-cells = <2>; 141 #size-cells = <2>; 142 ranges; 143 144 secure-memory@81000000 { 145 reg = <0x0 0x81000000 0x0 0x01000000>; 146 no-map; 147 }; 148 }; 149 150 soc@0 { 151 compatible = "simple-bus"; 152 #address-cells = <1>; 153 #size-cells = <1>; 154 ranges = <0 0 0 0xffffffff>; 155 156 spi0: spi@54006000 { 157 compatible = "socionext,uniphier-scssi"; 158 status = "disabled"; 159 reg = <0x54006000 0x100>; 160 interrupts = <0 39 4>; 161 pinctrl-names = "default"; 162 pinctrl-0 = <&pinctrl_spi0>; 163 clocks = <&peri_clk 11>; 164 resets = <&peri_rst 11>; 165 }; 166 167 spi1: spi@54006100 { 168 compatible = "socionext,uniphier-scssi"; 169 status = "disabled"; 170 reg = <0x54006100 0x100>; 171 interrupts = <0 216 4>; 172 pinctrl-names = "default"; 173 pinctrl-0 = <&pinctrl_spi1>; 174 clocks = <&peri_clk 11>; 175 resets = <&peri_rst 11>; 176 }; 177 178 serial0: serial@54006800 { 179 compatible = "socionext,uniphier-uart"; 180 status = "disabled"; 181 reg = <0x54006800 0x40>; 182 interrupts = <0 33 4>; 183 pinctrl-names = "default"; 184 pinctrl-0 = <&pinctrl_uart0>; 185 clocks = <&peri_clk 0>; 186 resets = <&peri_rst 0>; 187 }; 188 189 serial1: serial@54006900 { 190 compatible = "socionext,uniphier-uart"; 191 status = "disabled"; 192 reg = <0x54006900 0x40>; 193 interrupts = <0 35 4>; 194 pinctrl-names = "default"; 195 pinctrl-0 = <&pinctrl_uart1>; 196 clocks = <&peri_clk 1>; 197 resets = <&peri_rst 1>; 198 }; 199 200 serial2: serial@54006a00 { 201 compatible = "socionext,uniphier-uart"; 202 status = "disabled"; 203 reg = <0x54006a00 0x40>; 204 interrupts = <0 37 4>; 205 pinctrl-names = "default"; 206 pinctrl-0 = <&pinctrl_uart2>; 207 clocks = <&peri_clk 2>; 208 resets = <&peri_rst 2>; 209 }; 210 211 serial3: serial@54006b00 { 212 compatible = "socionext,uniphier-uart"; 213 status = "disabled"; 214 reg = <0x54006b00 0x40>; 215 interrupts = <0 177 4>; 216 pinctrl-names = "default"; 217 pinctrl-0 = <&pinctrl_uart3>; 218 clocks = <&peri_clk 3>; 219 resets = <&peri_rst 3>; 220 }; 221 222 gpio: gpio@55000000 { 223 compatible = "socionext,uniphier-gpio"; 224 reg = <0x55000000 0x200>; 225 interrupt-parent = <&aidet>; 226 interrupt-controller; 227 #interrupt-cells = <2>; 228 gpio-controller; 229 #gpio-cells = <2>; 230 gpio-ranges = <&pinctrl 0 0 0>, 231 <&pinctrl 104 0 0>, 232 <&pinctrl 168 0 0>; 233 gpio-ranges-group-names = "gpio_range0", 234 "gpio_range1", 235 "gpio_range2"; 236 ngpios = <286>; 237 socionext,interrupt-ranges = <0 48 16>, <16 154 5>, 238 <21 217 3>; 239 }; 240 241 i2c0: i2c@58780000 { 242 compatible = "socionext,uniphier-fi2c"; 243 status = "disabled"; 244 reg = <0x58780000 0x80>; 245 #address-cells = <1>; 246 #size-cells = <0>; 247 interrupts = <0 41 4>; 248 pinctrl-names = "default"; 249 pinctrl-0 = <&pinctrl_i2c0>; 250 clocks = <&peri_clk 4>; 251 resets = <&peri_rst 4>; 252 clock-frequency = <100000>; 253 }; 254 255 i2c1: i2c@58781000 { 256 compatible = "socionext,uniphier-fi2c"; 257 status = "disabled"; 258 reg = <0x58781000 0x80>; 259 #address-cells = <1>; 260 #size-cells = <0>; 261 interrupts = <0 42 4>; 262 pinctrl-names = "default"; 263 pinctrl-0 = <&pinctrl_i2c1>; 264 clocks = <&peri_clk 5>; 265 resets = <&peri_rst 5>; 266 clock-frequency = <100000>; 267 }; 268 269 i2c2: i2c@58782000 { 270 compatible = "socionext,uniphier-fi2c"; 271 status = "disabled"; 272 reg = <0x58782000 0x80>; 273 #address-cells = <1>; 274 #size-cells = <0>; 275 interrupts = <0 43 4>; 276 pinctrl-names = "default"; 277 pinctrl-0 = <&pinctrl_i2c2>; 278 clocks = <&peri_clk 6>; 279 resets = <&peri_rst 6>; 280 clock-frequency = <100000>; 281 }; 282 283 i2c3: i2c@58783000 { 284 compatible = "socionext,uniphier-fi2c"; 285 status = "disabled"; 286 reg = <0x58783000 0x80>; 287 #address-cells = <1>; 288 #size-cells = <0>; 289 interrupts = <0 44 4>; 290 pinctrl-names = "default"; 291 pinctrl-0 = <&pinctrl_i2c3>; 292 clocks = <&peri_clk 7>; 293 resets = <&peri_rst 7>; 294 clock-frequency = <100000>; 295 }; 296 297 /* chip-internal connection for HDMI */ 298 i2c6: i2c@58786000 { 299 compatible = "socionext,uniphier-fi2c"; 300 reg = <0x58786000 0x80>; 301 #address-cells = <1>; 302 #size-cells = <0>; 303 interrupts = <0 26 4>; 304 clocks = <&peri_clk 10>; 305 resets = <&peri_rst 10>; 306 clock-frequency = <400000>; 307 }; 308 309 system_bus: system-bus@58c00000 { 310 compatible = "socionext,uniphier-system-bus"; 311 status = "disabled"; 312 reg = <0x58c00000 0x400>; 313 #address-cells = <2>; 314 #size-cells = <1>; 315 pinctrl-names = "default"; 316 pinctrl-0 = <&pinctrl_system_bus>; 317 }; 318 319 smpctrl@59801000 { 320 compatible = "socionext,uniphier-smpctrl"; 321 reg = <0x59801000 0x400>; 322 }; 323 324 sdctrl@59810000 { 325 compatible = "socionext,uniphier-pxs3-sdctrl", 326 "simple-mfd", "syscon"; 327 reg = <0x59810000 0x400>; 328 329 sd_clk: clock { 330 compatible = "socionext,uniphier-pxs3-sd-clock"; 331 #clock-cells = <1>; 332 }; 333 334 sd_rst: reset { 335 compatible = "socionext,uniphier-pxs3-sd-reset"; 336 #reset-cells = <1>; 337 }; 338 }; 339 340 perictrl@59820000 { 341 compatible = "socionext,uniphier-pxs3-perictrl", 342 "simple-mfd", "syscon"; 343 reg = <0x59820000 0x200>; 344 345 peri_clk: clock { 346 compatible = "socionext,uniphier-pxs3-peri-clock"; 347 #clock-cells = <1>; 348 }; 349 350 peri_rst: reset { 351 compatible = "socionext,uniphier-pxs3-peri-reset"; 352 #reset-cells = <1>; 353 }; 354 }; 355 356 emmc: sdhc@5a000000 { 357 compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; 358 reg = <0x5a000000 0x400>; 359 interrupts = <0 78 4>; 360 pinctrl-names = "default"; 361 pinctrl-0 = <&pinctrl_emmc>; 362 clocks = <&sys_clk 4>; 363 resets = <&sys_rst 4>; 364 bus-width = <8>; 365 mmc-ddr-1_8v; 366 mmc-hs200-1_8v; 367 mmc-pwrseq = <&emmc_pwrseq>; 368 cdns,phy-input-delay-legacy = <9>; 369 cdns,phy-input-delay-mmc-highspeed = <2>; 370 cdns,phy-input-delay-mmc-ddr = <3>; 371 cdns,phy-dll-delay-sdclk = <21>; 372 cdns,phy-dll-delay-sdclk-hsmmc = <21>; 373 }; 374 375 sd: sdhc@5a400000 { 376 compatible = "socionext,uniphier-sd-v3.1.1"; 377 status = "disabled"; 378 reg = <0x5a400000 0x800>; 379 interrupts = <0 76 4>; 380 pinctrl-names = "default", "uhs"; 381 pinctrl-0 = <&pinctrl_sd>; 382 pinctrl-1 = <&pinctrl_sd_uhs>; 383 clocks = <&sd_clk 0>; 384 reset-names = "host"; 385 resets = <&sd_rst 0>; 386 bus-width = <4>; 387 cap-sd-highspeed; 388 sd-uhs-sdr12; 389 sd-uhs-sdr25; 390 sd-uhs-sdr50; 391 }; 392 393 soc_glue: soc-glue@5f800000 { 394 compatible = "socionext,uniphier-pxs3-soc-glue", 395 "simple-mfd", "syscon"; 396 reg = <0x5f800000 0x2000>; 397 398 pinctrl: pinctrl { 399 compatible = "socionext,uniphier-pxs3-pinctrl"; 400 }; 401 }; 402 403 soc-glue@5f900000 { 404 compatible = "socionext,uniphier-pxs3-soc-glue-debug", 405 "simple-mfd"; 406 #address-cells = <1>; 407 #size-cells = <1>; 408 ranges = <0 0x5f900000 0x2000>; 409 410 efuse@100 { 411 compatible = "socionext,uniphier-efuse"; 412 reg = <0x100 0x28>; 413 }; 414 415 efuse@200 { 416 compatible = "socionext,uniphier-efuse"; 417 reg = <0x200 0x68>; 418 #address-cells = <1>; 419 #size-cells = <1>; 420 421 /* USB cells */ 422 usb_rterm0: trim@54,4 { 423 reg = <0x54 1>; 424 bits = <4 2>; 425 }; 426 usb_rterm1: trim@55,4 { 427 reg = <0x55 1>; 428 bits = <4 2>; 429 }; 430 usb_rterm2: trim@58,4 { 431 reg = <0x58 1>; 432 bits = <4 2>; 433 }; 434 usb_rterm3: trim@59,4 { 435 reg = <0x59 1>; 436 bits = <4 2>; 437 }; 438 usb_sel_t0: trim@54,0 { 439 reg = <0x54 1>; 440 bits = <0 4>; 441 }; 442 usb_sel_t1: trim@55,0 { 443 reg = <0x55 1>; 444 bits = <0 4>; 445 }; 446 usb_sel_t2: trim@58,0 { 447 reg = <0x58 1>; 448 bits = <0 4>; 449 }; 450 usb_sel_t3: trim@59,0 { 451 reg = <0x59 1>; 452 bits = <0 4>; 453 }; 454 usb_hs_i0: trim@56,0 { 455 reg = <0x56 1>; 456 bits = <0 4>; 457 }; 458 usb_hs_i2: trim@5a,0 { 459 reg = <0x5a 1>; 460 bits = <0 4>; 461 }; 462 }; 463 }; 464 465 aidet: aidet@5fc20000 { 466 compatible = "socionext,uniphier-pxs3-aidet"; 467 reg = <0x5fc20000 0x200>; 468 interrupt-controller; 469 #interrupt-cells = <2>; 470 }; 471 472 gic: interrupt-controller@5fe00000 { 473 compatible = "arm,gic-v3"; 474 reg = <0x5fe00000 0x10000>, /* GICD */ 475 <0x5fe80000 0x80000>; /* GICR */ 476 interrupt-controller; 477 #interrupt-cells = <3>; 478 interrupts = <1 9 4>; 479 }; 480 481 sysctrl@61840000 { 482 compatible = "socionext,uniphier-pxs3-sysctrl", 483 "simple-mfd", "syscon"; 484 reg = <0x61840000 0x10000>; 485 486 sys_clk: clock { 487 compatible = "socionext,uniphier-pxs3-clock"; 488 #clock-cells = <1>; 489 }; 490 491 sys_rst: reset { 492 compatible = "socionext,uniphier-pxs3-reset"; 493 #reset-cells = <1>; 494 }; 495 496 watchdog { 497 compatible = "socionext,uniphier-wdt"; 498 }; 499 }; 500 501 eth0: ethernet@65000000 { 502 compatible = "socionext,uniphier-pxs3-ave4"; 503 status = "disabled"; 504 reg = <0x65000000 0x8500>; 505 interrupts = <0 66 4>; 506 pinctrl-names = "default"; 507 pinctrl-0 = <&pinctrl_ether_rgmii>; 508 clock-names = "ether"; 509 clocks = <&sys_clk 6>; 510 reset-names = "ether"; 511 resets = <&sys_rst 6>; 512 phy-mode = "rgmii"; 513 local-mac-address = [00 00 00 00 00 00]; 514 socionext,syscon-phy-mode = <&soc_glue 0>; 515 516 mdio0: mdio { 517 #address-cells = <1>; 518 #size-cells = <0>; 519 }; 520 }; 521 522 eth1: ethernet@65200000 { 523 compatible = "socionext,uniphier-pxs3-ave4"; 524 status = "disabled"; 525 reg = <0x65200000 0x8500>; 526 interrupts = <0 67 4>; 527 pinctrl-names = "default"; 528 pinctrl-0 = <&pinctrl_ether1_rgmii>; 529 clock-names = "ether"; 530 clocks = <&sys_clk 7>; 531 reset-names = "ether"; 532 resets = <&sys_rst 7>; 533 phy-mode = "rgmii"; 534 local-mac-address = [00 00 00 00 00 00]; 535 socionext,syscon-phy-mode = <&soc_glue 1>; 536 537 mdio1: mdio { 538 #address-cells = <1>; 539 #size-cells = <0>; 540 }; 541 }; 542 543 usb0: usb@65a00000 { 544 compatible = "socionext,uniphier-dwc3", "snps,dwc3"; 545 status = "disabled"; 546 reg = <0x65a00000 0xcd00>; 547 interrupt-names = "host", "peripheral"; 548 interrupts = <0 134 4>, <0 135 4>; 549 pinctrl-names = "default"; 550 pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; 551 clock-names = "ref", "bus_early", "suspend"; 552 clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; 553 resets = <&usb0_rst 15>; 554 phys = <&usb0_hsphy0>, <&usb0_hsphy1>, 555 <&usb0_ssphy0>, <&usb0_ssphy1>; 556 dr_mode = "host"; 557 }; 558 559 usb-glue@65b00000 { 560 compatible = "socionext,uniphier-pxs3-dwc3-glue", 561 "simple-mfd"; 562 #address-cells = <1>; 563 #size-cells = <1>; 564 ranges = <0 0x65b00000 0x400>; 565 566 usb0_rst: reset@0 { 567 compatible = "socionext,uniphier-pxs3-usb3-reset"; 568 reg = <0x0 0x4>; 569 #reset-cells = <1>; 570 clock-names = "link"; 571 clocks = <&sys_clk 12>; 572 reset-names = "link"; 573 resets = <&sys_rst 12>; 574 }; 575 576 usb0_vbus0: regulator@100 { 577 compatible = "socionext,uniphier-pxs3-usb3-regulator"; 578 reg = <0x100 0x10>; 579 clock-names = "link"; 580 clocks = <&sys_clk 12>; 581 reset-names = "link"; 582 resets = <&sys_rst 12>; 583 }; 584 585 usb0_vbus1: regulator@110 { 586 compatible = "socionext,uniphier-pxs3-usb3-regulator"; 587 reg = <0x110 0x10>; 588 clock-names = "link"; 589 clocks = <&sys_clk 12>; 590 reset-names = "link"; 591 resets = <&sys_rst 12>; 592 }; 593 594 usb0_hsphy0: hs-phy@200 { 595 compatible = "socionext,uniphier-pxs3-usb3-hsphy"; 596 reg = <0x200 0x10>; 597 #phy-cells = <0>; 598 clock-names = "link", "phy"; 599 clocks = <&sys_clk 12>, <&sys_clk 16>; 600 reset-names = "link", "phy"; 601 resets = <&sys_rst 12>, <&sys_rst 16>; 602 vbus-supply = <&usb0_vbus0>; 603 nvmem-cell-names = "rterm", "sel_t", "hs_i"; 604 nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, 605 <&usb_hs_i0>; 606 }; 607 608 usb0_hsphy1: hs-phy@210 { 609 compatible = "socionext,uniphier-pxs3-usb3-hsphy"; 610 reg = <0x210 0x10>; 611 #phy-cells = <0>; 612 clock-names = "link", "phy"; 613 clocks = <&sys_clk 12>, <&sys_clk 16>; 614 reset-names = "link", "phy"; 615 resets = <&sys_rst 12>, <&sys_rst 16>; 616 vbus-supply = <&usb0_vbus1>; 617 nvmem-cell-names = "rterm", "sel_t", "hs_i"; 618 nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>, 619 <&usb_hs_i0>; 620 }; 621 622 usb0_ssphy0: ss-phy@300 { 623 compatible = "socionext,uniphier-pxs3-usb3-ssphy"; 624 reg = <0x300 0x10>; 625 #phy-cells = <0>; 626 clock-names = "link", "phy"; 627 clocks = <&sys_clk 12>, <&sys_clk 17>; 628 reset-names = "link", "phy"; 629 resets = <&sys_rst 12>, <&sys_rst 17>; 630 vbus-supply = <&usb0_vbus0>; 631 }; 632 633 usb0_ssphy1: ss-phy@310 { 634 compatible = "socionext,uniphier-pxs3-usb3-ssphy"; 635 reg = <0x310 0x10>; 636 #phy-cells = <0>; 637 clock-names = "link", "phy"; 638 clocks = <&sys_clk 12>, <&sys_clk 18>; 639 reset-names = "link", "phy"; 640 resets = <&sys_rst 12>, <&sys_rst 18>; 641 vbus-supply = <&usb0_vbus1>; 642 }; 643 }; 644 645 usb1: usb@65c00000 { 646 compatible = "socionext,uniphier-dwc3", "snps,dwc3"; 647 status = "disabled"; 648 reg = <0x65c00000 0xcd00>; 649 interrupt-names = "host", "peripheral"; 650 interrupts = <0 137 4>, <0 138 4>; 651 pinctrl-names = "default"; 652 pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; 653 clock-names = "ref", "bus_early", "suspend"; 654 clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>; 655 resets = <&usb1_rst 15>; 656 phys = <&usb1_hsphy0>, <&usb1_hsphy1>, 657 <&usb1_ssphy0>; 658 dr_mode = "host"; 659 }; 660 661 usb-glue@65d00000 { 662 compatible = "socionext,uniphier-pxs3-dwc3-glue", 663 "simple-mfd"; 664 #address-cells = <1>; 665 #size-cells = <1>; 666 ranges = <0 0x65d00000 0x400>; 667 668 usb1_rst: reset@0 { 669 compatible = "socionext,uniphier-pxs3-usb3-reset"; 670 reg = <0x0 0x4>; 671 #reset-cells = <1>; 672 clock-names = "link"; 673 clocks = <&sys_clk 13>; 674 reset-names = "link"; 675 resets = <&sys_rst 13>; 676 }; 677 678 usb1_vbus0: regulator@100 { 679 compatible = "socionext,uniphier-pxs3-usb3-regulator"; 680 reg = <0x100 0x10>; 681 clock-names = "link"; 682 clocks = <&sys_clk 13>; 683 reset-names = "link"; 684 resets = <&sys_rst 13>; 685 }; 686 687 usb1_vbus1: regulator@110 { 688 compatible = "socionext,uniphier-pxs3-usb3-regulator"; 689 reg = <0x110 0x10>; 690 clock-names = "link"; 691 clocks = <&sys_clk 13>; 692 reset-names = "link"; 693 resets = <&sys_rst 13>; 694 }; 695 696 usb1_hsphy0: hs-phy@200 { 697 compatible = "socionext,uniphier-pxs3-usb3-hsphy"; 698 reg = <0x200 0x10>; 699 #phy-cells = <0>; 700 clock-names = "link", "phy", "phy-ext"; 701 clocks = <&sys_clk 13>, <&sys_clk 20>, 702 <&sys_clk 14>; 703 reset-names = "link", "phy"; 704 resets = <&sys_rst 13>, <&sys_rst 20>; 705 vbus-supply = <&usb1_vbus0>; 706 nvmem-cell-names = "rterm", "sel_t", "hs_i"; 707 nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>, 708 <&usb_hs_i2>; 709 }; 710 711 usb1_hsphy1: hs-phy@210 { 712 compatible = "socionext,uniphier-pxs3-usb3-hsphy"; 713 reg = <0x210 0x10>; 714 #phy-cells = <0>; 715 clock-names = "link", "phy", "phy-ext"; 716 clocks = <&sys_clk 13>, <&sys_clk 20>, 717 <&sys_clk 14>; 718 reset-names = "link", "phy"; 719 resets = <&sys_rst 13>, <&sys_rst 20>; 720 vbus-supply = <&usb1_vbus1>; 721 nvmem-cell-names = "rterm", "sel_t", "hs_i"; 722 nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>, 723 <&usb_hs_i2>; 724 }; 725 726 usb1_ssphy0: ss-phy@300 { 727 compatible = "socionext,uniphier-pxs3-usb3-ssphy"; 728 reg = <0x300 0x10>; 729 #phy-cells = <0>; 730 clock-names = "link", "phy", "phy-ext"; 731 clocks = <&sys_clk 13>, <&sys_clk 21>, 732 <&sys_clk 14>; 733 reset-names = "link", "phy"; 734 resets = <&sys_rst 13>, <&sys_rst 21>; 735 vbus-supply = <&usb1_vbus0>; 736 }; 737 }; 738 739 pcie: pcie@66000000 { 740 compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; 741 status = "disabled"; 742 reg-names = "dbi", "link", "config"; 743 reg = <0x66000000 0x1000>, <0x66010000 0x10000>, 744 <0x2fff0000 0x10000>; 745 #address-cells = <3>; 746 #size-cells = <2>; 747 clocks = <&sys_clk 24>; 748 resets = <&sys_rst 24>; 749 num-lanes = <1>; 750 num-viewport = <1>; 751 bus-range = <0x0 0xff>; 752 device_type = "pci"; 753 ranges = 754 /* downstream I/O */ 755 <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, 756 /* non-prefetchable memory */ 757 <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; 758 #interrupt-cells = <1>; 759 interrupt-names = "dma", "msi"; 760 interrupts = <0 224 4>, <0 225 4>; 761 interrupt-map-mask = <0 0 0 7>; 762 interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ 763 <0 0 0 2 &pcie_intc 1>, /* INTB */ 764 <0 0 0 3 &pcie_intc 2>, /* INTC */ 765 <0 0 0 4 &pcie_intc 3>; /* INTD */ 766 phy-names = "pcie-phy"; 767 phys = <&pcie_phy>; 768 769 pcie_intc: legacy-interrupt-controller { 770 interrupt-controller; 771 #interrupt-cells = <1>; 772 interrupt-parent = <&gic>; 773 interrupts = <0 226 4>; 774 }; 775 }; 776 777 pcie_phy: phy@66038000 { 778 compatible = "socionext,uniphier-pxs3-pcie-phy"; 779 reg = <0x66038000 0x4000>; 780 #phy-cells = <0>; 781 clocks = <&sys_clk 24>; 782 resets = <&sys_rst 24>; 783 socionext,syscon = <&soc_glue>; 784 }; 785 786 nand: nand@68000000 { 787 compatible = "socionext,uniphier-denali-nand-v5b"; 788 status = "disabled"; 789 reg-names = "nand_data", "denali_reg"; 790 reg = <0x68000000 0x20>, <0x68100000 0x1000>; 791 #address-cells = <1>; 792 #size-cells = <0>; 793 interrupts = <0 65 4>; 794 pinctrl-names = "default"; 795 pinctrl-0 = <&pinctrl_nand>; 796 clock-names = "nand", "nand_x", "ecc"; 797 clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; 798 resets = <&sys_rst 2>; 799 }; 800 }; 801}; 802 803#include "uniphier-pinctrl.dtsi" 804