1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 3/* 4 * Copyright (c) 2021 Rockchip Electronics Co., Ltd. 5 * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com> 6 */ 7 8/dts-v1/; 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/leds/common.h> 11#include <dt-bindings/pinctrl/rockchip.h> 12#include <dt-bindings/soc/rockchip,vop2.h> 13#include "rk3568.dtsi" 14 15/ { 16 model = "EmbedFire LubanCat 2"; 17 compatible = "embedfire,lubancat-2", "rockchip,rk3568"; 18 19 aliases { 20 ethernet0 = &gmac0; 21 ethernet1 = &gmac1; 22 mmc0 = &sdmmc0; 23 mmc1 = &sdhci; 24 }; 25 26 chosen: chosen { 27 stdout-path = "serial2:1500000n8"; 28 }; 29 30 leds { 31 compatible = "gpio-leds"; 32 33 user_led: user-led { 34 label = "user_led"; 35 linux,default-trigger = "heartbeat"; 36 default-state = "on"; 37 gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; 38 pinctrl-names = "default"; 39 pinctrl-0 = <&user_led_pin>; 40 }; 41 }; 42 43 hdmi-con { 44 compatible = "hdmi-connector"; 45 type = "a"; 46 47 port { 48 hdmi_con_in: endpoint { 49 remote-endpoint = <&hdmi_out_con>; 50 }; 51 }; 52 }; 53 54 dc_5v: dc-5v-regulator { 55 compatible = "regulator-fixed"; 56 regulator-name = "dc_5v"; 57 regulator-always-on; 58 regulator-boot-on; 59 regulator-min-microvolt = <5000000>; 60 regulator-max-microvolt = <5000000>; 61 }; 62 63 vcc3v3_sys: vcc3v3-sys-regulator { 64 compatible = "regulator-fixed"; 65 regulator-name = "vcc3v3_sys"; 66 regulator-always-on; 67 regulator-boot-on; 68 regulator-min-microvolt = <3300000>; 69 regulator-max-microvolt = <3300000>; 70 vin-supply = <&vcc5v0_sys>; 71 }; 72 73 vcc5v0_sys: vcc5v0-sys-regulator { 74 compatible = "regulator-fixed"; 75 regulator-name = "vcc5v0_sys"; 76 regulator-always-on; 77 regulator-boot-on; 78 regulator-min-microvolt = <5000000>; 79 regulator-max-microvolt = <5000000>; 80 vin-supply = <&dc_5v>; 81 }; 82 83 vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator { 84 compatible = "regulator-fixed"; 85 regulator-name = "m2_pcie_3v3"; 86 enable-active-high; 87 regulator-min-microvolt = <3300000>; 88 regulator-max-microvolt = <3300000>; 89 gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; 90 pinctrl-0 = <&vcc3v3_m2_pcie_en>; 91 pinctrl-names = "default"; 92 startup-delay-us = <200000>; 93 vin-supply = <&vcc5v0_sys>; 94 }; 95 96 vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator { 97 compatible = "regulator-fixed"; 98 regulator-name = "minipcie_3v3"; 99 enable-active-high; 100 regulator-min-microvolt = <3300000>; 101 regulator-max-microvolt = <3300000>; 102 gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; 103 pinctrl-0 = <&vcc3v3_mini_pcie_en>; 104 pinctrl-names = "default"; 105 startup-delay-us = <5000>; 106 vin-supply = <&vcc5v0_sys>; 107 }; 108 109 vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { 110 compatible = "regulator-fixed"; 111 regulator-name = "vcc5v0_usb20_host"; 112 enable-active-high; 113 gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; 114 pinctrl-0 = <&vcc5v0_usb20_host_en>; 115 pinctrl-names = "default"; 116 }; 117 118 vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { 119 compatible = "regulator-fixed"; 120 regulator-name = "vcc5v0_usb30_host"; 121 enable-active-high; 122 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; 123 pinctrl-0 = <&vcc5v0_usb30_host_en>; 124 pinctrl-names = "default"; 125 }; 126 127 vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator { 128 compatible = "regulator-fixed"; 129 regulator-name = "vcc5v0_otg_vbus"; 130 enable-active-high; 131 regulator-min-microvolt = <5000000>; 132 regulator-max-microvolt = <5000000>; 133 gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; 134 pinctrl-0 = <&vcc5v0_otg_vbus_en>; 135 pinctrl-names = "default"; 136 }; 137}; 138 139&combphy0 { 140 status = "okay"; 141}; 142 143&combphy1 { 144 status = "okay"; 145}; 146 147&combphy2 { 148 status = "okay"; 149}; 150 151&cpu0 { 152 cpu-supply = <&vdd_cpu>; 153}; 154 155&cpu1 { 156 cpu-supply = <&vdd_cpu>; 157}; 158 159&cpu2 { 160 cpu-supply = <&vdd_cpu>; 161}; 162 163&cpu3 { 164 cpu-supply = <&vdd_cpu>; 165}; 166 167&gpu { 168 mali-supply = <&vdd_gpu>; 169 status = "okay"; 170}; 171 172&hdmi { 173 avdd-0v9-supply = <&vdda0v9_image>; 174 avdd-1v8-supply = <&vcca1v8_image>; 175 status = "okay"; 176}; 177 178&hdmi_in { 179 hdmi_in_vp0: endpoint { 180 remote-endpoint = <&vp0_out_hdmi>; 181 }; 182}; 183 184&hdmi_out { 185 hdmi_out_con: endpoint { 186 remote-endpoint = <&hdmi_con_in>; 187 }; 188}; 189 190&hdmi_sound { 191 status = "okay"; 192}; 193 194&i2c0 { 195 status = "okay"; 196 197 vdd_cpu: regulator@1c { 198 compatible = "tcs,tcs4525"; 199 reg = <0x1c>; 200 fcs,suspend-voltage-selector = <1>; 201 regulator-name = "vdd_cpu"; 202 regulator-always-on; 203 regulator-boot-on; 204 regulator-min-microvolt = <800000>; 205 regulator-max-microvolt = <1150000>; 206 regulator-ramp-delay = <2300>; 207 vin-supply = <&vcc5v0_sys>; 208 209 regulator-state-mem { 210 regulator-off-in-suspend; 211 }; 212 }; 213 214 rk809: pmic@20 { 215 compatible = "rockchip,rk809"; 216 reg = <0x20>; 217 interrupt-parent = <&gpio0>; 218 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; 219 assigned-clocks = <&cru I2S1_MCLKOUT_TX>; 220 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; 221 #clock-cells = <1>; 222 clock-names = "mclk"; 223 clocks = <&cru I2S1_MCLKOUT_TX>; 224 pinctrl-names = "default"; 225 pinctrl-0 = <&pmic_int>; 226 rockchip,system-power-controller; 227 #sound-dai-cells = <0>; 228 vcc1-supply = <&vcc3v3_sys>; 229 vcc2-supply = <&vcc3v3_sys>; 230 vcc3-supply = <&vcc3v3_sys>; 231 vcc4-supply = <&vcc3v3_sys>; 232 vcc5-supply = <&vcc3v3_sys>; 233 vcc6-supply = <&vcc3v3_sys>; 234 vcc7-supply = <&vcc3v3_sys>; 235 vcc8-supply = <&vcc3v3_sys>; 236 vcc9-supply = <&vcc3v3_sys>; 237 wakeup-source; 238 239 regulators { 240 vdd_logic: DCDC_REG1 { 241 regulator-name = "vdd_logic"; 242 regulator-always-on; 243 regulator-boot-on; 244 regulator-min-microvolt = <500000>; 245 regulator-max-microvolt = <1350000>; 246 regulator-ramp-delay = <6001>; 247 regulator-initial-mode = <0x2>; 248 249 regulator-state-mem { 250 regulator-off-in-suspend; 251 }; 252 }; 253 254 vdd_gpu: DCDC_REG2 { 255 regulator-name = "vdd_gpu"; 256 regulator-always-on; 257 regulator-boot-on; 258 regulator-min-microvolt = <500000>; 259 regulator-max-microvolt = <1350000>; 260 regulator-ramp-delay = <6001>; 261 regulator-initial-mode = <0x2>; 262 263 regulator-state-mem { 264 regulator-off-in-suspend; 265 }; 266 }; 267 268 vcc_ddr: DCDC_REG3 { 269 regulator-name = "vcc_ddr"; 270 regulator-always-on; 271 regulator-boot-on; 272 regulator-initial-mode = <0x2>; 273 274 regulator-state-mem { 275 regulator-on-in-suspend; 276 }; 277 }; 278 279 vdd_npu: DCDC_REG4 { 280 regulator-name = "vdd_npu"; 281 regulator-always-on; 282 regulator-boot-on; 283 regulator-min-microvolt = <500000>; 284 regulator-max-microvolt = <1350000>; 285 regulator-ramp-delay = <6001>; 286 regulator-initial-mode = <0x2>; 287 288 regulator-state-mem { 289 regulator-off-in-suspend; 290 }; 291 }; 292 293 vcc_1v8: DCDC_REG5 { 294 regulator-name = "vcc_1v8"; 295 regulator-always-on; 296 regulator-boot-on; 297 regulator-min-microvolt = <1800000>; 298 regulator-max-microvolt = <1800000>; 299 300 regulator-state-mem { 301 regulator-off-in-suspend; 302 }; 303 }; 304 305 vdda0v9_image: LDO_REG1 { 306 regulator-name = "vdda0v9_image"; 307 regulator-boot-on; 308 regulator-always-on; 309 regulator-min-microvolt = <900000>; 310 regulator-max-microvolt = <900000>; 311 312 regulator-state-mem { 313 regulator-off-in-suspend; 314 }; 315 }; 316 317 vdda_0v9: LDO_REG2 { 318 regulator-name = "vdda_0v9"; 319 regulator-always-on; 320 regulator-boot-on; 321 regulator-min-microvolt = <900000>; 322 regulator-max-microvolt = <900000>; 323 324 regulator-state-mem { 325 regulator-off-in-suspend; 326 }; 327 }; 328 329 vdda0v9_pmu: LDO_REG3 { 330 regulator-name = "vdda0v9_pmu"; 331 regulator-always-on; 332 regulator-boot-on; 333 regulator-min-microvolt = <900000>; 334 regulator-max-microvolt = <900000>; 335 336 regulator-state-mem { 337 regulator-on-in-suspend; 338 regulator-suspend-microvolt = <900000>; 339 }; 340 }; 341 342 vccio_acodec: LDO_REG4 { 343 regulator-name = "vccio_acodec"; 344 regulator-always-on; 345 regulator-boot-on; 346 regulator-min-microvolt = <3300000>; 347 regulator-max-microvolt = <3300000>; 348 349 regulator-state-mem { 350 regulator-off-in-suspend; 351 }; 352 }; 353 354 vccio_sd: LDO_REG5 { 355 regulator-name = "vccio_sd"; 356 regulator-always-on; 357 regulator-boot-on; 358 regulator-min-microvolt = <1800000>; 359 regulator-max-microvolt = <3300000>; 360 361 regulator-state-mem { 362 regulator-off-in-suspend; 363 }; 364 }; 365 366 vcc3v3_pmu: LDO_REG6 { 367 regulator-name = "vcc3v3_pmu"; 368 regulator-always-on; 369 regulator-boot-on; 370 regulator-min-microvolt = <3300000>; 371 regulator-max-microvolt = <3300000>; 372 373 regulator-state-mem { 374 regulator-on-in-suspend; 375 regulator-suspend-microvolt = <3300000>; 376 }; 377 }; 378 379 vcca_1v8: LDO_REG7 { 380 regulator-name = "vcca_1v8"; 381 regulator-always-on; 382 regulator-boot-on; 383 regulator-min-microvolt = <1800000>; 384 regulator-max-microvolt = <1800000>; 385 386 regulator-state-mem { 387 regulator-off-in-suspend; 388 }; 389 }; 390 391 vcca1v8_pmu: LDO_REG8 { 392 regulator-name = "vcca1v8_pmu"; 393 regulator-always-on; 394 regulator-boot-on; 395 regulator-min-microvolt = <1800000>; 396 regulator-max-microvolt = <1800000>; 397 398 regulator-state-mem { 399 regulator-on-in-suspend; 400 regulator-suspend-microvolt = <1800000>; 401 }; 402 }; 403 404 vcca1v8_image: LDO_REG9 { 405 regulator-name = "vcca1v8_image"; 406 regulator-always-on; 407 regulator-boot-on; 408 regulator-min-microvolt = <1800000>; 409 regulator-max-microvolt = <1800000>; 410 411 regulator-state-mem { 412 regulator-off-in-suspend; 413 }; 414 }; 415 416 vcc_3v3: SWITCH_REG1 { 417 regulator-name = "vcc_3v3"; 418 regulator-always-on; 419 regulator-boot-on; 420 421 regulator-state-mem { 422 regulator-off-in-suspend; 423 }; 424 }; 425 426 vcc3v3_sd: SWITCH_REG2 { 427 regulator-name = "vcc3v3_sd"; 428 regulator-always-on; 429 regulator-boot-on; 430 431 regulator-state-mem { 432 regulator-off-in-suspend; 433 }; 434 }; 435 }; 436 }; 437}; 438 439&i2s1_8ch { 440 rockchip,trcm-sync-tx-only; 441 status = "okay"; 442}; 443 444&gmac0 { 445 phy-mode = "rgmii"; 446 clock_in_out = "output"; 447 448 snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; 449 snps,reset-active-low; 450 /* Reset time is 20ms, 100ms for rtl8211f */ 451 snps,reset-delays-us = <0 20000 100000>; 452 453 assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; 454 assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; 455 456 pinctrl-names = "default"; 457 pinctrl-0 = <&gmac0_miim 458 &gmac0_tx_bus2 459 &gmac0_rx_bus2 460 &gmac0_rgmii_clk 461 &gmac0_rgmii_bus>; 462 463 tx_delay = <0x22>; 464 rx_delay = <0x0e>; 465 466 phy-handle = <&rgmii_phy0>; 467 status = "okay"; 468}; 469 470&mdio0 { 471 rgmii_phy0: phy@0 { 472 compatible = "ethernet-phy-ieee802.3-c22"; 473 reg = <0x0>; 474 }; 475}; 476 477&gmac1 { 478 phy-mode = "rgmii"; 479 clock_in_out = "output"; 480 481 snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; 482 snps,reset-active-low; 483 /* Reset time is 20ms, 100ms for rtl8211f */ 484 snps,reset-delays-us = <0 20000 100000>; 485 486 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; 487 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; 488 489 pinctrl-names = "default"; 490 pinctrl-0 = <&gmac1m1_miim 491 &gmac1m1_tx_bus2 492 &gmac1m1_rx_bus2 493 &gmac1m1_rgmii_clk 494 &gmac1m1_rgmii_bus>; 495 496 tx_delay = <0x21>; 497 rx_delay = <0x0e>; 498 499 phy-handle = <&rgmii_phy1>; 500 status = "okay"; 501}; 502 503&mdio1 { 504 rgmii_phy1: phy@0 { 505 compatible = "ethernet-phy-ieee802.3-c22"; 506 reg = <0x0>; 507 }; 508}; 509 510&gic { 511 mbi-ranges = <94 31>, <229 31>, <289 31>; 512}; 513 514&pcie30phy { 515 status = "okay"; 516}; 517 518&pcie3x2 { 519 reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; 520 vpcie3v3-supply = <&vcc3v3_m2_pcie>; 521 status = "okay"; 522}; 523 524&pcie2x1 { 525 reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; 526 disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; 527 vpcie3v3-supply = <&vcc3v3_mini_pcie>; 528 status = "okay"; 529}; 530 531&pmu_io_domains { 532 pmuio2-supply = <&vcc3v3_pmu>; 533 vccio1-supply = <&vccio_acodec>; 534 vccio3-supply = <&vccio_sd>; 535 vccio4-supply = <&vcc_1v8>; 536 vccio5-supply = <&vcc_3v3>; 537 vccio6-supply = <&vcc_1v8>; 538 vccio7-supply = <&vcc_3v3>; 539 status = "okay"; 540}; 541 542&pwm8 { 543 status = "okay"; 544}; 545 546&pwm9 { 547 status = "disabled"; 548}; 549 550&pwm10 { 551 status = "disabled"; 552}; 553 554&pwm14 { 555 status = "disabled"; 556}; 557 558&spi3 { 559 pinctrl-0 = <&spi3m1_pins>; 560 status = "disabled"; 561}; 562 563&uart2 { 564 status = "okay"; 565}; 566 567&uart3 { 568 pinctrl-names = "default"; 569 pinctrl-0 = <&uart3m1_xfer>; 570 status = "disabled"; 571}; 572 573&saradc { 574 vref-supply = <&vcca_1v8>; 575 status = "okay"; 576}; 577 578&tsadc { 579 rockchip,hw-tshut-mode = <1>; 580 rockchip,hw-tshut-polarity = <0>; 581 status = "okay"; 582}; 583 584&sdhci { 585 assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; 586 assigned-clock-rates = <200000000>, <24000000>, <200000000>; 587 bus-width = <8>; 588 max-frequency = <200000000>; 589 mmc-hs200-1_8v; 590 non-removable; 591 pinctrl-names = "default"; 592 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; 593 status = "okay"; 594}; 595 596&sdmmc0 { 597 max-frequency = <150000000>; 598 no-sdio; 599 no-mmc; 600 bus-width = <4>; 601 cap-mmc-highspeed; 602 cap-sd-highspeed; 603 disable-wp; 604 sd-uhs-sdr104; 605 vmmc-supply = <&vcc3v3_sd>; 606 vqmmc-supply = <&vccio_sd>; 607 pinctrl-names = "default"; 608 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; 609 status = "okay"; 610}; 611 612/* USB OTG/USB Host_1 USB 2.0 Comb */ 613&usb2phy0 { 614 status = "okay"; 615}; 616 617&usb2phy0_host { 618 phy-supply = <&vcc5v0_usb30_host>; 619 status = "okay"; 620}; 621 622&usb2phy0_otg { 623 phy-supply = <&vcc5v0_otg_vbus>; 624 status = "okay"; 625}; 626 627&usb_host0_ehci { 628 status = "okay"; 629}; 630 631&usb_host0_ohci { 632 status = "okay"; 633}; 634 635/* USB Host_2/USB Host_3 USB 2.0 Comb */ 636&usb2phy1 { 637 status = "okay"; 638}; 639 640&usb2phy1_host { 641 status = "okay"; 642}; 643 644&usb2phy1_otg { 645 phy-supply = <&vcc5v0_usb20_host>; 646 status = "okay"; 647}; 648 649&usb_host1_ehci { 650 status = "okay"; 651}; 652 653&usb_host1_ohci { 654 status = "okay"; 655}; 656 657/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */ 658&usb_host0_xhci { 659 phys = <&usb2phy0_otg>; 660 phy-names = "usb2-phy"; 661 extcon = <&usb2phy0>; 662 maximum-speed = "high-speed"; 663 dr_mode = "host"; 664 status = "okay"; 665}; 666 667&sata0 { 668 status = "okay"; 669}; 670 671/* USB3.0 Host */ 672&usb_host1_xhci { 673 status = "okay"; 674}; 675 676&vop { 677 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; 678 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; 679 status = "okay"; 680}; 681 682&vop_mmu { 683 status = "okay"; 684}; 685 686&vp0 { 687 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { 688 reg = <ROCKCHIP_VOP2_EP_HDMI0>; 689 remote-endpoint = <&hdmi_in_vp0>; 690 }; 691}; 692 693&pinctrl { 694 leds { 695 user_led_pin: user-status-led-pin { 696 rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; 697 }; 698 }; 699 700 usb { 701 vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { 702 rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; 703 }; 704 705 vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { 706 rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; 707 }; 708 709 vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en { 710 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 711 }; 712 }; 713 714 pcie { 715 vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en { 716 rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; 717 }; 718 719 vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en { 720 rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; 721 }; 722 }; 723 724 pmic { 725 pmic_int: pmic-int { 726 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 727 }; 728 }; 729}; 730