1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2021 Rockchip Electronics Co., Ltd. 4 * 5 */ 6 7/dts-v1/; 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/leds/common.h> 10#include <dt-bindings/pinctrl/rockchip.h> 11#include <dt-bindings/soc/rockchip,vop2.h> 12#include "rk3568.dtsi" 13 14/ { 15 model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; 16 compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; 17 18 aliases { 19 ethernet0 = &gmac0; 20 ethernet1 = &gmac1; 21 mmc0 = &sdmmc0; 22 mmc1 = &sdhci; 23 }; 24 25 chosen: chosen { 26 stdout-path = "serial2:1500000n8"; 27 }; 28 29 dc_12v: dc-12v { 30 compatible = "regulator-fixed"; 31 regulator-name = "dc_12v"; 32 regulator-always-on; 33 regulator-boot-on; 34 regulator-min-microvolt = <12000000>; 35 regulator-max-microvolt = <12000000>; 36 }; 37 38 hdmi-con { 39 compatible = "hdmi-connector"; 40 type = "a"; 41 42 port { 43 hdmi_con_in: endpoint { 44 remote-endpoint = <&hdmi_out_con>; 45 }; 46 }; 47 }; 48 49 leds { 50 compatible = "gpio-leds"; 51 52 led_work: led-0 { 53 gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; 54 function = LED_FUNCTION_HEARTBEAT; 55 color = <LED_COLOR_ID_BLUE>; 56 linux,default-trigger = "heartbeat"; 57 pinctrl-names = "default"; 58 pinctrl-0 = <&led_work_en>; 59 }; 60 }; 61 62 rk809-sound { 63 compatible = "simple-audio-card"; 64 simple-audio-card,format = "i2s"; 65 simple-audio-card,name = "Analog RK809"; 66 simple-audio-card,mclk-fs = <256>; 67 68 simple-audio-card,cpu { 69 sound-dai = <&i2s1_8ch>; 70 }; 71 simple-audio-card,codec { 72 sound-dai = <&rk809>; 73 }; 74 }; 75 76 vcc3v3_sys: vcc3v3-sys { 77 compatible = "regulator-fixed"; 78 regulator-name = "vcc3v3_sys"; 79 regulator-always-on; 80 regulator-boot-on; 81 regulator-min-microvolt = <3300000>; 82 regulator-max-microvolt = <3300000>; 83 vin-supply = <&dc_12v>; 84 }; 85 86 vcc5v0_sys: vcc5v0-sys { 87 compatible = "regulator-fixed"; 88 regulator-name = "vcc5v0_sys"; 89 regulator-always-on; 90 regulator-boot-on; 91 regulator-min-microvolt = <5000000>; 92 regulator-max-microvolt = <5000000>; 93 vin-supply = <&dc_12v>; 94 }; 95 96 vcc5v0_usb: vcc5v0-usb { 97 compatible = "regulator-fixed"; 98 regulator-name = "vcc5v0_usb"; 99 regulator-always-on; 100 regulator-boot-on; 101 regulator-min-microvolt = <5000000>; 102 regulator-max-microvolt = <5000000>; 103 vin-supply = <&dc_12v>; 104 }; 105 106 vcc5v0_usb_host: vcc5v0-usb-host { 107 compatible = "regulator-fixed"; 108 enable-active-high; 109 gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; 110 pinctrl-names = "default"; 111 pinctrl-0 = <&vcc5v0_usb_host_en>; 112 regulator-name = "vcc5v0_usb_host"; 113 regulator-min-microvolt = <5000000>; 114 regulator-max-microvolt = <5000000>; 115 vin-supply = <&vcc5v0_usb>; 116 }; 117 118 vcc5v0_usb_otg: vcc5v0-usb-otg { 119 compatible = "regulator-fixed"; 120 enable-active-high; 121 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; 122 pinctrl-names = "default"; 123 pinctrl-0 = <&vcc5v0_usb_otg_en>; 124 regulator-name = "vcc5v0_usb_otg"; 125 regulator-min-microvolt = <5000000>; 126 regulator-max-microvolt = <5000000>; 127 vin-supply = <&vcc5v0_usb>; 128 }; 129 130 vcc3v3_lcd0_n: vcc3v3-lcd0-n { 131 compatible = "regulator-fixed"; 132 regulator-name = "vcc3v3_lcd0_n"; 133 regulator-min-microvolt = <3300000>; 134 regulator-max-microvolt = <3300000>; 135 enable-active-high; 136 gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; 137 vin-supply = <&vcc3v3_sys>; 138 pinctrl-names = "default"; 139 pinctrl-0 = <&vcc3v3_lcd0_n_en>; 140 141 regulator-state-mem { 142 regulator-off-in-suspend; 143 }; 144 }; 145 146 vcc3v3_lcd1_n: vcc3v3-lcd1-n { 147 compatible = "regulator-fixed"; 148 regulator-name = "vcc3v3_lcd1_n"; 149 regulator-min-microvolt = <3300000>; 150 regulator-max-microvolt = <3300000>; 151 enable-active-high; 152 gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; 153 vin-supply = <&vcc3v3_sys>; 154 pinctrl-names = "default"; 155 pinctrl-0 = <&vcc3v3_lcd1_n_en>; 156 157 regulator-state-mem { 158 regulator-off-in-suspend; 159 }; 160 }; 161}; 162 163&combphy0 { 164 status = "okay"; 165}; 166 167&combphy1 { 168 status = "okay"; 169}; 170 171&cpu0 { 172 cpu-supply = <&vdd_cpu>; 173}; 174 175&cpu1 { 176 cpu-supply = <&vdd_cpu>; 177}; 178 179&cpu2 { 180 cpu-supply = <&vdd_cpu>; 181}; 182 183&cpu3 { 184 cpu-supply = <&vdd_cpu>; 185}; 186 187&gmac0 { 188 assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; 189 assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; 190 assigned-clock-rates = <0>, <125000000>; 191 clock_in_out = "output"; 192 phy-handle = <&rgmii_phy0>; 193 phy-mode = "rgmii-id"; 194 pinctrl-names = "default"; 195 pinctrl-0 = <&gmac0_miim 196 &gmac0_tx_bus2 197 &gmac0_rx_bus2 198 &gmac0_rgmii_clk 199 &gmac0_rgmii_bus>; 200 status = "okay"; 201}; 202 203&gmac1 { 204 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; 205 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; 206 assigned-clock-rates = <0>, <125000000>; 207 clock_in_out = "output"; 208 phy-handle = <&rgmii_phy1>; 209 phy-mode = "rgmii-id"; 210 pinctrl-names = "default"; 211 pinctrl-0 = <&gmac1m1_miim 212 &gmac1m1_tx_bus2 213 &gmac1m1_rx_bus2 214 &gmac1m1_rgmii_clk 215 &gmac1m1_rgmii_bus>; 216 status = "okay"; 217}; 218 219&gpu { 220 mali-supply = <&vdd_gpu>; 221 status = "okay"; 222}; 223 224&hdmi { 225 avdd-0v9-supply = <&vdda0v9_image>; 226 avdd-1v8-supply = <&vcca1v8_image>; 227 status = "okay"; 228}; 229 230&hdmi_in { 231 hdmi_in_vp0: endpoint { 232 remote-endpoint = <&vp0_out_hdmi>; 233 }; 234}; 235 236&hdmi_out { 237 hdmi_out_con: endpoint { 238 remote-endpoint = <&hdmi_con_in>; 239 }; 240}; 241 242&hdmi_sound { 243 status = "okay"; 244}; 245 246&i2c0 { 247 status = "okay"; 248 249 vdd_cpu: regulator@1c { 250 compatible = "tcs,tcs4525"; 251 reg = <0x1c>; 252 fcs,suspend-voltage-selector = <1>; 253 regulator-name = "vdd_cpu"; 254 regulator-always-on; 255 regulator-boot-on; 256 regulator-min-microvolt = <800000>; 257 regulator-max-microvolt = <1150000>; 258 regulator-ramp-delay = <2300>; 259 vin-supply = <&vcc5v0_sys>; 260 261 regulator-state-mem { 262 regulator-off-in-suspend; 263 }; 264 }; 265 266 rk809: pmic@20 { 267 compatible = "rockchip,rk809"; 268 reg = <0x20>; 269 interrupt-parent = <&gpio0>; 270 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; 271 assigned-clocks = <&cru I2S1_MCLKOUT_TX>; 272 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; 273 #clock-cells = <1>; 274 clock-names = "mclk"; 275 clocks = <&cru I2S1_MCLKOUT_TX>; 276 pinctrl-names = "default"; 277 pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; 278 rockchip,system-power-controller; 279 #sound-dai-cells = <0>; 280 vcc1-supply = <&vcc3v3_sys>; 281 vcc2-supply = <&vcc3v3_sys>; 282 vcc3-supply = <&vcc3v3_sys>; 283 vcc4-supply = <&vcc3v3_sys>; 284 vcc5-supply = <&vcc3v3_sys>; 285 vcc6-supply = <&vcc3v3_sys>; 286 vcc7-supply = <&vcc3v3_sys>; 287 vcc8-supply = <&vcc3v3_sys>; 288 vcc9-supply = <&vcc3v3_sys>; 289 wakeup-source; 290 291 regulators { 292 vdd_logic: DCDC_REG1 { 293 regulator-name = "vdd_logic"; 294 regulator-always-on; 295 regulator-boot-on; 296 regulator-init-microvolt = <900000>; 297 regulator-initial-mode = <0x2>; 298 regulator-min-microvolt = <500000>; 299 regulator-max-microvolt = <1350000>; 300 regulator-ramp-delay = <6001>; 301 302 regulator-state-mem { 303 regulator-off-in-suspend; 304 }; 305 }; 306 307 vdd_gpu: DCDC_REG2 { 308 regulator-name = "vdd_gpu"; 309 regulator-always-on; 310 regulator-init-microvolt = <900000>; 311 regulator-initial-mode = <0x2>; 312 regulator-min-microvolt = <500000>; 313 regulator-max-microvolt = <1350000>; 314 regulator-ramp-delay = <6001>; 315 316 regulator-state-mem { 317 regulator-off-in-suspend; 318 }; 319 }; 320 321 vcc_ddr: DCDC_REG3 { 322 regulator-name = "vcc_ddr"; 323 regulator-always-on; 324 regulator-boot-on; 325 regulator-initial-mode = <0x2>; 326 327 regulator-state-mem { 328 regulator-on-in-suspend; 329 }; 330 }; 331 332 vdd_npu: DCDC_REG4 { 333 regulator-name = "vdd_npu"; 334 regulator-init-microvolt = <900000>; 335 regulator-initial-mode = <0x2>; 336 regulator-min-microvolt = <500000>; 337 regulator-max-microvolt = <1350000>; 338 regulator-ramp-delay = <6001>; 339 340 regulator-state-mem { 341 regulator-off-in-suspend; 342 }; 343 }; 344 345 vcc_1v8: DCDC_REG5 { 346 regulator-name = "vcc_1v8"; 347 regulator-always-on; 348 regulator-boot-on; 349 regulator-min-microvolt = <1800000>; 350 regulator-max-microvolt = <1800000>; 351 352 regulator-state-mem { 353 regulator-off-in-suspend; 354 }; 355 }; 356 357 vdda0v9_image: LDO_REG1 { 358 regulator-name = "vdda0v9_image"; 359 regulator-min-microvolt = <900000>; 360 regulator-max-microvolt = <900000>; 361 362 regulator-state-mem { 363 regulator-off-in-suspend; 364 }; 365 }; 366 367 vdda_0v9: LDO_REG2 { 368 regulator-name = "vdda_0v9"; 369 regulator-always-on; 370 regulator-boot-on; 371 regulator-min-microvolt = <900000>; 372 regulator-max-microvolt = <900000>; 373 374 regulator-state-mem { 375 regulator-off-in-suspend; 376 }; 377 }; 378 379 vdda0v9_pmu: LDO_REG3 { 380 regulator-name = "vdda0v9_pmu"; 381 regulator-always-on; 382 regulator-boot-on; 383 regulator-min-microvolt = <900000>; 384 regulator-max-microvolt = <900000>; 385 386 regulator-state-mem { 387 regulator-on-in-suspend; 388 regulator-suspend-microvolt = <900000>; 389 }; 390 }; 391 392 vccio_acodec: LDO_REG4 { 393 regulator-name = "vccio_acodec"; 394 regulator-always-on; 395 regulator-min-microvolt = <3300000>; 396 regulator-max-microvolt = <3300000>; 397 398 regulator-state-mem { 399 regulator-off-in-suspend; 400 }; 401 }; 402 403 vccio_sd: LDO_REG5 { 404 regulator-name = "vccio_sd"; 405 regulator-min-microvolt = <1800000>; 406 regulator-max-microvolt = <3300000>; 407 408 regulator-state-mem { 409 regulator-off-in-suspend; 410 }; 411 }; 412 413 vcc3v3_pmu: LDO_REG6 { 414 regulator-name = "vcc3v3_pmu"; 415 regulator-always-on; 416 regulator-boot-on; 417 regulator-min-microvolt = <3300000>; 418 regulator-max-microvolt = <3300000>; 419 420 regulator-state-mem { 421 regulator-on-in-suspend; 422 regulator-suspend-microvolt = <3300000>; 423 }; 424 }; 425 426 vcca_1v8: LDO_REG7 { 427 regulator-name = "vcca_1v8"; 428 regulator-always-on; 429 regulator-boot-on; 430 regulator-min-microvolt = <1800000>; 431 regulator-max-microvolt = <1800000>; 432 433 regulator-state-mem { 434 regulator-off-in-suspend; 435 }; 436 }; 437 438 vcca1v8_pmu: LDO_REG8 { 439 regulator-name = "vcca1v8_pmu"; 440 regulator-always-on; 441 regulator-boot-on; 442 regulator-min-microvolt = <1800000>; 443 regulator-max-microvolt = <1800000>; 444 445 regulator-state-mem { 446 regulator-on-in-suspend; 447 regulator-suspend-microvolt = <1800000>; 448 }; 449 }; 450 451 vcca1v8_image: LDO_REG9 { 452 regulator-name = "vcca1v8_image"; 453 regulator-min-microvolt = <1800000>; 454 regulator-max-microvolt = <1800000>; 455 456 regulator-state-mem { 457 regulator-off-in-suspend; 458 }; 459 }; 460 461 vcc_3v3: SWITCH_REG1 { 462 regulator-name = "vcc_3v3"; 463 regulator-always-on; 464 regulator-boot-on; 465 466 regulator-state-mem { 467 regulator-off-in-suspend; 468 }; 469 }; 470 471 vcc3v3_sd: SWITCH_REG2 { 472 regulator-name = "vcc3v3_sd"; 473 474 regulator-state-mem { 475 regulator-off-in-suspend; 476 }; 477 }; 478 }; 479 480 codec { 481 mic-in-differential; 482 }; 483 }; 484}; 485 486&i2c1 { 487 status = "okay"; 488 489 touchscreen0: goodix@14 { 490 compatible = "goodix,gt1151"; 491 reg = <0x14>; 492 interrupt-parent = <&gpio0>; 493 interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; 494 AVDD28-supply = <&vcc3v3_lcd0_n>; 495 irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; 496 pinctrl-names = "default"; 497 pinctrl-0 = <&touch_int &touch_rst>; 498 reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; 499 VDDIO-supply = <&vcc3v3_lcd0_n>; 500 }; 501}; 502 503&i2s0_8ch { 504 status = "okay"; 505}; 506 507&i2s1_8ch { 508 rockchip,trcm-sync-tx-only; 509 status = "okay"; 510}; 511 512&mdio0 { 513 rgmii_phy0: ethernet-phy@0 { 514 compatible = "ethernet-phy-ieee802.3-c22"; 515 reg = <0x0>; 516 reset-assert-us = <20000>; 517 reset-deassert-us = <100000>; 518 reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; 519 }; 520}; 521 522&mdio1 { 523 rgmii_phy1: ethernet-phy@0 { 524 compatible = "ethernet-phy-ieee802.3-c22"; 525 reg = <0x0>; 526 reset-assert-us = <20000>; 527 reset-deassert-us = <100000>; 528 reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; 529 }; 530}; 531 532&pinctrl { 533 display { 534 vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en { 535 rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>; 536 }; 537 vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en { 538 rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; 539 }; 540 }; 541 542 leds { 543 led_work_en: led_work_en { 544 rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; 545 }; 546 }; 547 548 pmic { 549 pmic_int: pmic_int { 550 rockchip,pins = 551 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 552 }; 553 }; 554 555 touchscreen { 556 touch_int: touch_int { 557 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; 558 }; 559 touch_rst: touch_rst { 560 rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; 561 }; 562 }; 563 564 usb { 565 vcc5v0_usb_host_en: vcc5v0_usb_host_en { 566 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; 567 }; 568 vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { 569 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; 570 }; 571 }; 572}; 573 574&pmu_io_domains { 575 pmuio1-supply = <&vcc3v3_pmu>; 576 pmuio2-supply = <&vcc3v3_pmu>; 577 vccio1-supply = <&vccio_acodec>; 578 vccio2-supply = <&vcc_1v8>; 579 vccio3-supply = <&vccio_sd>; 580 vccio4-supply = <&vcc_1v8>; 581 vccio5-supply = <&vcc_3v3>; 582 vccio6-supply = <&vcc_1v8>; 583 vccio7-supply = <&vcc_3v3>; 584 status = "okay"; 585}; 586 587&saradc { 588 vref-supply = <&vcca_1v8>; 589 status = "okay"; 590}; 591 592&sdhci { 593 bus-width = <8>; 594 max-frequency = <200000000>; 595 non-removable; 596 pinctrl-names = "default"; 597 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; 598 status = "okay"; 599}; 600 601&sdmmc0 { 602 bus-width = <4>; 603 cap-sd-highspeed; 604 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; 605 disable-wp; 606 pinctrl-names = "default"; 607 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; 608 sd-uhs-sdr104; 609 vmmc-supply = <&vcc3v3_sd>; 610 vqmmc-supply = <&vccio_sd>; 611 status = "okay"; 612}; 613 614&tsadc { 615 rockchip,hw-tshut-mode = <1>; 616 rockchip,hw-tshut-polarity = <0>; 617 status = "okay"; 618}; 619 620&uart2 { 621 status = "okay"; 622}; 623 624&usb_host0_ehci { 625 status = "okay"; 626}; 627 628&usb_host0_ohci { 629 status = "okay"; 630}; 631 632&usb_host0_xhci { 633 extcon = <&usb2phy0>; 634 status = "okay"; 635}; 636 637&usb_host1_ehci { 638 status = "okay"; 639}; 640 641&usb_host1_ohci { 642 status = "okay"; 643}; 644 645&usb_host1_xhci { 646 status = "okay"; 647}; 648 649&usb2phy0 { 650 status = "okay"; 651}; 652 653&usb2phy0_host { 654 phy-supply = <&vcc5v0_usb_host>; 655 status = "okay"; 656}; 657 658&usb2phy0_otg { 659 vbus-supply = <&vcc5v0_usb_otg>; 660 status = "okay"; 661}; 662 663&usb2phy1 { 664 status = "okay"; 665}; 666 667&usb2phy1_host { 668 phy-supply = <&vcc5v0_usb_host>; 669 status = "okay"; 670}; 671 672&usb2phy1_otg { 673 phy-supply = <&vcc5v0_usb_host>; 674 status = "okay"; 675}; 676 677&vop { 678 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; 679 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; 680 status = "okay"; 681}; 682 683&vop_mmu { 684 status = "okay"; 685}; 686 687&vp0 { 688 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { 689 reg = <ROCKCHIP_VOP2_EP_HDMI0>; 690 remote-endpoint = <&hdmi_in_vp0>; 691 }; 692}; 693