1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 3/dts-v1/; 4 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/pinctrl/rockchip.h> 7#include "rk3566.dtsi" 8 9/ { 10 model = "Pine64 RK3566 Quartz64-A Board"; 11 compatible = "pine64,quartz64-a", "rockchip,rk3566"; 12 13 aliases { 14 ethernet0 = &gmac1; 15 mmc0 = &sdmmc0; 16 mmc1 = &sdhci; 17 }; 18 19 chosen: chosen { 20 stdout-path = "serial2:1500000n8"; 21 }; 22 23 gmac1_clkin: external-gmac1-clock { 24 compatible = "fixed-clock"; 25 clock-frequency = <125000000>; 26 clock-output-names = "gmac1_clkin"; 27 #clock-cells = <0>; 28 }; 29 30 fan: gpio_fan { 31 compatible = "gpio-fan"; 32 gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; 33 gpio-fan,speed-map = <0 0 34 4500 1>; 35 #cooling-cells = <2>; 36 }; 37 38 leds { 39 compatible = "gpio-leds"; 40 41 led-work { 42 label = "work-led"; 43 default-state = "off"; 44 gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; 45 pinctrl-names = "default"; 46 pinctrl-0 = <&work_led_enable_h>; 47 retain-state-suspended; 48 }; 49 50 led-diy { 51 label = "diy-led"; 52 default-state = "on"; 53 gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; 54 linux,default-trigger = "heartbeat"; 55 pinctrl-names = "default"; 56 pinctrl-0 = <&diy_led_enable_h>; 57 retain-state-suspended; 58 }; 59 }; 60 61 rk817-sound { 62 compatible = "simple-audio-card"; 63 simple-audio-card,format = "i2s"; 64 simple-audio-card,name = "Analog RK817"; 65 simple-audio-card,mclk-fs = <256>; 66 67 simple-audio-card,cpu { 68 sound-dai = <&i2s1_8ch>; 69 }; 70 71 simple-audio-card,codec { 72 sound-dai = <&rk817>; 73 }; 74 }; 75 76 spdif_dit: spdif-dit { 77 compatible = "linux,spdif-dit"; 78 #sound-dai-cells = <0>; 79 }; 80 81 spdif_sound: spdif-sound { 82 compatible = "simple-audio-card"; 83 simple-audio-card,name = "SPDIF"; 84 85 simple-audio-card,cpu { 86 sound-dai = <&spdif>; 87 }; 88 89 simple-audio-card,codec { 90 sound-dai = <&spdif_dit>; 91 }; 92 }; 93 94 vcc12v_dcin: vcc12v_dcin { 95 compatible = "regulator-fixed"; 96 regulator-name = "vcc12v_dcin"; 97 regulator-always-on; 98 regulator-boot-on; 99 regulator-min-microvolt = <12000000>; 100 regulator-max-microvolt = <12000000>; 101 }; 102 103 /* vbus feeds the rk817 usb input. 104 * With no battery attached, also feeds vcc_bat+ 105 * via ON/OFF_BAT jumper 106 */ 107 vbus: vbus { 108 compatible = "regulator-fixed"; 109 regulator-name = "vbus"; 110 regulator-always-on; 111 regulator-boot-on; 112 regulator-min-microvolt = <5000000>; 113 regulator-max-microvolt = <5000000>; 114 vin-supply = <&vcc12v_dcin>; 115 }; 116 117 vcc5v0_usb: vcc5v0_usb { 118 compatible = "regulator-fixed"; 119 regulator-name = "vcc5v0_usb"; 120 regulator-always-on; 121 regulator-boot-on; 122 regulator-min-microvolt = <5000000>; 123 regulator-max-microvolt = <5000000>; 124 vin-supply = <&vcc12v_dcin>; 125 }; 126 127 vcc3v3_sd: vcc3v3_sd { 128 compatible = "regulator-fixed"; 129 enable-active-low; 130 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; 131 pinctrl-names = "default"; 132 pinctrl-0 = <&vcc_sd_h>; 133 regulator-boot-on; 134 regulator-name = "vcc3v3_sd"; 135 regulator-min-microvolt = <3300000>; 136 regulator-max-microvolt = <3300000>; 137 vin-supply = <&vcc_3v3>; 138 }; 139 140 /* sourced from vbus and vcc_bat+ via rk817 sw5 */ 141 vcc_sys: vcc_sys { 142 compatible = "regulator-fixed"; 143 regulator-name = "vcc_sys"; 144 regulator-always-on; 145 regulator-boot-on; 146 regulator-min-microvolt = <4400000>; 147 regulator-max-microvolt = <4400000>; 148 vin-supply = <&vbus>; 149 }; 150}; 151 152&cpu0 { 153 cpu-supply = <&vdd_cpu>; 154}; 155 156&cpu1 { 157 cpu-supply = <&vdd_cpu>; 158}; 159 160&cpu2 { 161 cpu-supply = <&vdd_cpu>; 162}; 163 164&cpu3 { 165 cpu-supply = <&vdd_cpu>; 166}; 167 168&cpu_thermal { 169 trips { 170 cpu_hot: cpu_hot { 171 temperature = <55000>; 172 hysteresis = <2000>; 173 type = "active"; 174 }; 175 }; 176 177 cooling-maps { 178 map1 { 179 trip = <&cpu_hot>; 180 cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 181 }; 182 }; 183}; 184 185&gmac1 { 186 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; 187 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; 188 clock_in_out = "input"; 189 phy-supply = <&vcc_3v3>; 190 phy-mode = "rgmii"; 191 pinctrl-names = "default"; 192 pinctrl-0 = <&gmac1m0_miim 193 &gmac1m0_tx_bus2 194 &gmac1m0_rx_bus2 195 &gmac1m0_rgmii_clk 196 &gmac1m0_clkinout 197 &gmac1m0_rgmii_bus>; 198 snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; 199 snps,reset-active-low; 200 /* Reset time is 20ms, 100ms for rtl8211f */ 201 snps,reset-delays-us = <0 20000 100000>; 202 tx_delay = <0x30>; 203 rx_delay = <0x10>; 204 phy-handle = <&rgmii_phy1>; 205 status = "okay"; 206}; 207 208&i2c0 { 209 status = "okay"; 210 211 vdd_cpu: regulator@1c { 212 compatible = "tcs,tcs4525"; 213 reg = <0x1c>; 214 fcs,suspend-voltage-selector = <1>; 215 regulator-name = "vdd_cpu"; 216 regulator-min-microvolt = <800000>; 217 regulator-max-microvolt = <1150000>; 218 regulator-ramp-delay = <2300>; 219 regulator-always-on; 220 regulator-boot-on; 221 vin-supply = <&vcc_sys>; 222 223 regulator-state-mem { 224 regulator-off-in-suspend; 225 }; 226 }; 227 228 rk817: pmic@20 { 229 compatible = "rockchip,rk817"; 230 reg = <0x20>; 231 interrupt-parent = <&gpio0>; 232 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; 233 assigned-clocks = <&cru I2S1_MCLKOUT_TX>; 234 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; 235 clock-names = "mclk"; 236 clocks = <&cru I2S1_MCLKOUT_TX>; 237 clock-output-names = "rk808-clkout1", "rk808-clkout2"; 238 #clock-cells = <1>; 239 pinctrl-names = "default"; 240 pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; 241 rockchip,system-power-controller; 242 #sound-dai-cells = <0>; 243 wakeup-source; 244 245 vcc1-supply = <&vcc_sys>; 246 vcc2-supply = <&vcc_sys>; 247 vcc3-supply = <&vcc_sys>; 248 vcc4-supply = <&vcc_sys>; 249 vcc5-supply = <&vcc_sys>; 250 vcc6-supply = <&vcc_sys>; 251 vcc7-supply = <&vcc_sys>; 252 vcc8-supply = <&vcc_sys>; 253 vcc9-supply = <&dcdc_boost>; 254 255 regulators { 256 vdd_logic: DCDC_REG1 { 257 regulator-always-on; 258 regulator-boot-on; 259 regulator-min-microvolt = <500000>; 260 regulator-max-microvolt = <1350000>; 261 regulator-init-microvolt = <900000>; 262 regulator-ramp-delay = <6001>; 263 regulator-initial-mode = <0x2>; 264 regulator-name = "vdd_logic"; 265 regulator-state-mem { 266 regulator-on-in-suspend; 267 regulator-suspend-microvolt = <900000>; 268 }; 269 }; 270 271 vdd_gpu: DCDC_REG2 { 272 regulator-always-on; 273 regulator-boot-on; 274 regulator-min-microvolt = <500000>; 275 regulator-max-microvolt = <1350000>; 276 regulator-init-microvolt = <900000>; 277 regulator-ramp-delay = <6001>; 278 regulator-initial-mode = <0x2>; 279 regulator-name = "vdd_gpu"; 280 regulator-state-mem { 281 regulator-off-in-suspend; 282 }; 283 }; 284 285 vcc_ddr: DCDC_REG3 { 286 regulator-always-on; 287 regulator-boot-on; 288 regulator-min-microvolt = <1100000>; 289 regulator-max-microvolt = <1100000>; 290 regulator-initial-mode = <0x2>; 291 regulator-name = "vcc_ddr"; 292 regulator-state-mem { 293 regulator-on-in-suspend; 294 }; 295 }; 296 297 vcc_3v3: DCDC_REG4 { 298 regulator-always-on; 299 regulator-boot-on; 300 regulator-min-microvolt = <3300000>; 301 regulator-max-microvolt = <3300000>; 302 regulator-initial-mode = <0x2>; 303 regulator-name = "vcc_3v3"; 304 regulator-state-mem { 305 regulator-off-in-suspend; 306 }; 307 }; 308 309 vcca1v8_pmu: LDO_REG1 { 310 regulator-always-on; 311 regulator-boot-on; 312 regulator-min-microvolt = <1800000>; 313 regulator-max-microvolt = <1800000>; 314 regulator-name = "vcca1v8_pmu"; 315 regulator-state-mem { 316 regulator-on-in-suspend; 317 regulator-suspend-microvolt = <1800000>; 318 }; 319 }; 320 321 vdda_0v9: LDO_REG2 { 322 regulator-always-on; 323 regulator-boot-on; 324 regulator-min-microvolt = <900000>; 325 regulator-max-microvolt = <900000>; 326 regulator-name = "vdda_0v9"; 327 regulator-state-mem { 328 regulator-off-in-suspend; 329 }; 330 }; 331 332 vdda0v9_pmu: LDO_REG3 { 333 regulator-always-on; 334 regulator-boot-on; 335 regulator-min-microvolt = <900000>; 336 regulator-max-microvolt = <900000>; 337 regulator-name = "vdda0v9_pmu"; 338 regulator-state-mem { 339 regulator-on-in-suspend; 340 regulator-suspend-microvolt = <900000>; 341 }; 342 }; 343 344 vccio_acodec: LDO_REG4 { 345 regulator-always-on; 346 regulator-boot-on; 347 regulator-min-microvolt = <3300000>; 348 regulator-max-microvolt = <3300000>; 349 regulator-name = "vccio_acodec"; 350 regulator-state-mem { 351 regulator-off-in-suspend; 352 }; 353 }; 354 355 vccio_sd: LDO_REG5 { 356 regulator-always-on; 357 regulator-boot-on; 358 regulator-min-microvolt = <1800000>; 359 regulator-max-microvolt = <3300000>; 360 regulator-name = "vccio_sd"; 361 regulator-state-mem { 362 regulator-off-in-suspend; 363 }; 364 }; 365 366 vcc3v3_pmu: LDO_REG6 { 367 regulator-always-on; 368 regulator-boot-on; 369 regulator-min-microvolt = <3300000>; 370 regulator-max-microvolt = <3300000>; 371 regulator-name = "vcc3v3_pmu"; 372 regulator-state-mem { 373 regulator-on-in-suspend; 374 regulator-suspend-microvolt = <3300000>; 375 }; 376 }; 377 378 vcc_1v8: LDO_REG7 { 379 regulator-always-on; 380 regulator-boot-on; 381 regulator-min-microvolt = <1800000>; 382 regulator-max-microvolt = <1800000>; 383 regulator-name = "vcc_1v8"; 384 regulator-state-mem { 385 regulator-off-in-suspend; 386 }; 387 }; 388 389 vcc1v8_dvp: LDO_REG8 { 390 regulator-always-on; 391 regulator-boot-on; 392 regulator-min-microvolt = <1800000>; 393 regulator-max-microvolt = <1800000>; 394 regulator-name = "vcc1v8_dvp"; 395 regulator-state-mem { 396 regulator-off-in-suspend; 397 }; 398 }; 399 400 vcc2v8_dvp: LDO_REG9 { 401 regulator-always-on; 402 regulator-boot-on; 403 regulator-min-microvolt = <2800000>; 404 regulator-max-microvolt = <2800000>; 405 regulator-name = "vcc2v8_dvp"; 406 regulator-state-mem { 407 regulator-off-in-suspend; 408 }; 409 }; 410 411 dcdc_boost: BOOST { 412 regulator-always-on; 413 regulator-boot-on; 414 regulator-min-microvolt = <5000000>; 415 regulator-max-microvolt = <5000000>; 416 regulator-name = "boost"; 417 regulator-state-mem { 418 regulator-off-in-suspend; 419 }; 420 }; 421 422 otg_switch: OTG_SWITCH { 423 regulator-name = "otg_switch"; 424 regulator-state-mem { 425 regulator-off-in-suspend; 426 }; 427 }; 428 }; 429 }; 430}; 431 432&i2s1_8ch { 433 pinctrl-names = "default"; 434 pinctrl-0 = <&i2s1m0_sclktx 435 &i2s1m0_lrcktx 436 &i2s1m0_sdi0 437 &i2s1m0_sdo0>; 438 rockchip,trcm-sync-tx-only; 439 status = "okay"; 440}; 441 442&mdio1 { 443 rgmii_phy1: ethernet-phy@0 { 444 compatible = "ethernet-phy-ieee802.3-c22"; 445 reg = <0>; 446 }; 447}; 448 449&pinctrl { 450 bt { 451 bt_enable_h: bt-enable-h { 452 rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; 453 }; 454 455 bt_host_wake_l: bt-host-wake-l { 456 rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; 457 }; 458 459 bt_wake_l: bt-wake-l { 460 rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; 461 }; 462 }; 463 464 leds { 465 work_led_enable_h: work-led-enable-h { 466 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 467 }; 468 469 diy_led_enable_h: diy-led-enable-h { 470 rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; 471 }; 472 }; 473 474 pmic { 475 pmic_int_l: pmic-int-l { 476 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 477 }; 478 }; 479 480 vcc_sd { 481 vcc_sd_h: vcc-sd-h { 482 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; 483 }; 484 }; 485}; 486 487&sdhci { 488 bus-width = <8>; 489 mmc-hs200-1_8v; 490 non-removable; 491 vmmc-supply = <&vcc_3v3>; 492 vqmmc-supply = <&vcc_1v8>; 493 status = "okay"; 494}; 495 496&sdmmc0 { 497 bus-width = <4>; 498 cap-sd-highspeed; 499 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; 500 disable-wp; 501 pinctrl-names = "default"; 502 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; 503 vmmc-supply = <&vcc3v3_sd>; 504 vqmmc-supply = <&vccio_sd>; 505 status = "okay"; 506}; 507 508&spdif { 509 status = "okay"; 510}; 511 512&tsadc { 513 /* tshut mode 0:CRU 1:GPIO */ 514 rockchip,hw-tshut-mode = <1>; 515 /* tshut polarity 0:LOW 1:HIGH */ 516 rockchip,hw-tshut-polarity = <0>; 517 status = "okay"; 518}; 519 520&uart0 { 521 pinctrl-names = "default"; 522 pinctrl-0 = <&uart0_xfer>; 523 status = "okay"; 524}; 525 526&uart1 { 527 pinctrl-names = "default"; 528 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; 529 status = "okay"; 530 uart-has-rtscts; 531 532 bluetooth { 533 compatible = "brcm,bcm43438-bt"; 534 clocks = <&rk817 1>; 535 clock-names = "lpo"; 536 device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; 537 host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; 538 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; 539 pinctrl-names = "default"; 540 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; 541 vbat-supply = <&vcc_sys>; 542 vddio-supply = <&vcca1v8_pmu>; 543 }; 544}; 545 546&uart2 { 547 status = "okay"; 548}; 549