1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
5 */
6
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/pwm/pwm.h>
9#include "rk3399.dtsi"
10#include "rk3399-opp.dtsi"
11
12/ {
13	chosen {
14		stdout-path = "serial2:1500000n8";
15	};
16
17	clkin_gmac: external-gmac-clock {
18		compatible = "fixed-clock";
19		clock-frequency = <125000000>;
20		clock-output-names = "clkin_gmac";
21		#clock-cells = <0>;
22	};
23
24	gpio-keys {
25		compatible = "gpio-keys";
26		autorepeat;
27		pinctrl-names = "default";
28		pinctrl-0 = <&pwrbtn>;
29
30		power {
31			debounce-interval = <100>;
32			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
33			label = "GPIO Key Power";
34			linux,code = <KEY_POWER>;
35			wakeup-source;
36		};
37	};
38
39	leds {
40		compatible = "gpio-leds";
41		pinctrl-names = "default";
42		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
43
44		work_led: led-0 {
45			label = "work";
46			default-state = "on";
47			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
48		};
49
50		diy_led: led-1 {
51			label = "diy";
52			default-state = "off";
53			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
54		};
55	};
56
57	fan: pwm-fan {
58		compatible = "pwm-fan";
59		#cooling-cells = <2>;
60		fan-supply = <&vcc12v_dcin>;
61		pwms = <&pwm1 0 50000 0>;
62	};
63
64	sdio_pwrseq: sdio-pwrseq {
65		compatible = "mmc-pwrseq-simple";
66		clocks = <&rk808 1>;
67		clock-names = "ext_clock";
68		pinctrl-names = "default";
69		pinctrl-0 = <&wifi_enable_h>;
70		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
71	};
72
73	sound {
74		compatible = "audio-graph-card";
75		label = "rockchip,rk3399";
76		dais = <&i2s1_p0>;
77	};
78
79	vcc12v_dcin: vcc12v-dcin {
80		compatible = "regulator-fixed";
81		regulator-name = "vcc12v_dcin";
82		regulator-always-on;
83		regulator-boot-on;
84		regulator-min-microvolt = <12000000>;
85		regulator-max-microvolt = <12000000>;
86	};
87
88	/* switched by pmic_sleep */
89	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
90		compatible = "regulator-fixed";
91		regulator-name = "vcc1v8_s3";
92		regulator-always-on;
93		regulator-boot-on;
94		regulator-min-microvolt = <1800000>;
95		regulator-max-microvolt = <1800000>;
96		vin-supply = <&vcc_1v8>;
97	};
98
99	/* micro SD card power */
100	vcc3v0_sd: vcc3v0-sd {
101		compatible = "regulator-fixed";
102		enable-active-high;
103		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
104		pinctrl-names = "default";
105		pinctrl-0 = <&sdmmc0_pwr_h>;
106		regulator-name = "vcc3v0_sd";
107		regulator-always-on;
108		regulator-min-microvolt = <3000000>;
109		regulator-max-microvolt = <3000000>;
110		vin-supply = <&vcc3v3_sys>;
111
112		regulator-state-mem {
113			regulator-off-in-suspend;
114		};
115	};
116
117	vcc3v3_pcie: vcc3v3-pcie-regulator {
118		compatible = "regulator-fixed";
119		enable-active-high;
120		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
121		pinctrl-names = "default";
122		pinctrl-0 = <&pcie_pwr_en>;
123		regulator-name = "vcc3v3_pcie";
124		regulator-always-on;
125		regulator-boot-on;
126		vin-supply = <&vcc12v_dcin>;
127	};
128
129	vcc3v3_sys: vcc3v3-sys {
130		compatible = "regulator-fixed";
131		regulator-name = "vcc3v3_sys";
132		regulator-always-on;
133		regulator-boot-on;
134		regulator-min-microvolt = <3300000>;
135		regulator-max-microvolt = <3300000>;
136		vin-supply = <&vcc5v0_sys>;
137	};
138
139	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
140	vcc5v0_host: vcc5v0-host-regulator {
141		compatible = "regulator-fixed";
142		enable-active-high;
143		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
144		pinctrl-names = "default";
145		pinctrl-0 = <&vcc5v0_host_en>;
146		regulator-name = "vcc5v0_host";
147		regulator-always-on;
148		vin-supply = <&vcc5v0_usb>;
149	};
150
151	vcc5v0_typec: vcc5v0-typec-regulator {
152		compatible = "regulator-fixed";
153		enable-active-high;
154		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
155		pinctrl-names = "default";
156		pinctrl-0 = <&vcc5v0_typec_en>;
157		regulator-name = "vcc5v0_typec";
158		regulator-always-on;
159		vin-supply = <&vcc5v0_usb>;
160	};
161
162	vcc5v0_sys: vcc5v0-sys {
163		compatible = "regulator-fixed";
164		regulator-name = "vcc5v0_sys";
165		regulator-always-on;
166		regulator-boot-on;
167		regulator-min-microvolt = <5000000>;
168		regulator-max-microvolt = <5000000>;
169		vin-supply = <&vcc12v_dcin>;
170	};
171
172	vcc5v0_usb: vcc5v0-usb {
173		compatible = "regulator-fixed";
174		regulator-name = "vcc5v0_usb";
175		regulator-always-on;
176		regulator-boot-on;
177		regulator-min-microvolt = <5000000>;
178		regulator-max-microvolt = <5000000>;
179		vin-supply = <&vcc12v_dcin>;
180	};
181
182	vdd_log: vdd-log {
183		compatible = "pwm-regulator";
184		pwms = <&pwm2 0 25000 1>;
185		regulator-name = "vdd_log";
186		regulator-always-on;
187		regulator-boot-on;
188		regulator-min-microvolt = <800000>;
189		regulator-max-microvolt = <1700000>;
190		vin-supply = <&vcc5v0_sys>;
191	};
192};
193
194&cpu_l0 {
195	cpu-supply = <&vdd_cpu_l>;
196};
197
198&cpu_l1 {
199	cpu-supply = <&vdd_cpu_l>;
200};
201
202&cpu_l2 {
203	cpu-supply = <&vdd_cpu_l>;
204};
205
206&cpu_l3 {
207	cpu-supply = <&vdd_cpu_l>;
208};
209
210&cpu_b0 {
211	cpu-supply = <&vdd_cpu_b>;
212};
213
214&cpu_b1 {
215	cpu-supply = <&vdd_cpu_b>;
216};
217
218&emmc_phy {
219	status = "okay";
220};
221
222&gmac {
223	assigned-clocks = <&cru SCLK_RMII_SRC>;
224	assigned-clock-parents = <&clkin_gmac>;
225	clock_in_out = "input";
226	phy-supply = <&vcc_lan>;
227	phy-mode = "rgmii";
228	pinctrl-names = "default";
229	pinctrl-0 = <&rgmii_pins>;
230	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
231	snps,reset-active-low;
232	snps,reset-delays-us = <0 10000 50000>;
233	tx_delay = <0x28>;
234	rx_delay = <0x11>;
235	status = "okay";
236};
237
238&hdmi {
239	ddc-i2c-bus = <&i2c3>;
240	pinctrl-names = "default";
241	pinctrl-0 = <&hdmi_cec>;
242	status = "okay";
243};
244
245&hdmi_sound {
246	status = "okay";
247};
248
249&gpu {
250	mali-supply = <&vdd_gpu>;
251	status = "okay";
252};
253
254&i2c0 {
255	clock-frequency = <400000>;
256	i2c-scl-rising-time-ns = <168>;
257	i2c-scl-falling-time-ns = <4>;
258	status = "okay";
259
260	rk808: pmic@1b {
261		compatible = "rockchip,rk808";
262		reg = <0x1b>;
263		interrupt-parent = <&gpio3>;
264		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
265		#clock-cells = <1>;
266		clock-output-names = "xin32k", "rk808-clkout2";
267		pinctrl-names = "default";
268		pinctrl-0 = <&pmic_int_l>;
269		rockchip,system-power-controller;
270		wakeup-source;
271
272		vcc1-supply = <&vcc5v0_sys>;
273		vcc2-supply = <&vcc5v0_sys>;
274		vcc3-supply = <&vcc5v0_sys>;
275		vcc4-supply = <&vcc5v0_sys>;
276		vcc6-supply = <&vcc5v0_sys>;
277		vcc7-supply = <&vcc5v0_sys>;
278		vcc8-supply = <&vcc3v3_sys>;
279		vcc9-supply = <&vcc5v0_sys>;
280		vcc10-supply = <&vcc5v0_sys>;
281		vcc11-supply = <&vcc5v0_sys>;
282		vcc12-supply = <&vcc3v3_sys>;
283		vddio-supply = <&vcca_1v8>;
284
285		regulators {
286			vdd_center: DCDC_REG1 {
287				regulator-name = "vdd_center";
288				regulator-always-on;
289				regulator-boot-on;
290				regulator-min-microvolt = <750000>;
291				regulator-max-microvolt = <1350000>;
292				regulator-ramp-delay = <6001>;
293				regulator-state-mem {
294					regulator-off-in-suspend;
295				};
296			};
297
298			vdd_cpu_l: DCDC_REG2 {
299				regulator-name = "vdd_cpu_l";
300				regulator-always-on;
301				regulator-boot-on;
302				regulator-min-microvolt = <750000>;
303				regulator-max-microvolt = <1350000>;
304				regulator-ramp-delay = <6001>;
305				regulator-state-mem {
306					regulator-off-in-suspend;
307				};
308			};
309
310			vcc_ddr: DCDC_REG3 {
311				regulator-name = "vcc_ddr";
312				regulator-always-on;
313				regulator-boot-on;
314				regulator-state-mem {
315					regulator-on-in-suspend;
316				};
317			};
318
319			vcc_1v8: DCDC_REG4 {
320				regulator-name = "vcc_1v8";
321				regulator-always-on;
322				regulator-boot-on;
323				regulator-min-microvolt = <1800000>;
324				regulator-max-microvolt = <1800000>;
325				regulator-state-mem {
326					regulator-on-in-suspend;
327					regulator-suspend-microvolt = <1800000>;
328				};
329			};
330
331			vcc1v8_dvp: LDO_REG1 {
332				regulator-name = "vcc1v8_dvp";
333				regulator-always-on;
334				regulator-boot-on;
335				regulator-min-microvolt = <1800000>;
336				regulator-max-microvolt = <1800000>;
337				regulator-state-mem {
338					regulator-off-in-suspend;
339				};
340			};
341
342			vcc3v0_touch: LDO_REG2 {
343				regulator-name = "vcc3v0_touch";
344				regulator-always-on;
345				regulator-boot-on;
346				regulator-min-microvolt = <3000000>;
347				regulator-max-microvolt = <3000000>;
348				regulator-state-mem {
349					regulator-off-in-suspend;
350				};
351			};
352
353			vcca_1v8: LDO_REG3 {
354				regulator-name = "vcca_1v8";
355				regulator-always-on;
356				regulator-boot-on;
357				regulator-min-microvolt = <1800000>;
358				regulator-max-microvolt = <1800000>;
359				regulator-state-mem {
360					regulator-on-in-suspend;
361					regulator-suspend-microvolt = <1800000>;
362				};
363			};
364
365			vcc_sdio: LDO_REG4 {
366				regulator-name = "vcc_sdio";
367				regulator-always-on;
368				regulator-boot-on;
369				regulator-min-microvolt = <1800000>;
370				regulator-max-microvolt = <3000000>;
371				regulator-state-mem {
372					regulator-on-in-suspend;
373					regulator-suspend-microvolt = <3000000>;
374				};
375			};
376
377			vcca3v0_codec: LDO_REG5 {
378				regulator-name = "vcca3v0_codec";
379				regulator-always-on;
380				regulator-boot-on;
381				regulator-min-microvolt = <3000000>;
382				regulator-max-microvolt = <3000000>;
383				regulator-state-mem {
384					regulator-off-in-suspend;
385				};
386			};
387
388			vcc_1v5: LDO_REG6 {
389				regulator-name = "vcc_1v5";
390				regulator-always-on;
391				regulator-boot-on;
392				regulator-min-microvolt = <1500000>;
393				regulator-max-microvolt = <1500000>;
394				regulator-state-mem {
395					regulator-on-in-suspend;
396					regulator-suspend-microvolt = <1500000>;
397				};
398			};
399
400			vcca1v8_codec: LDO_REG7 {
401				regulator-name = "vcca1v8_codec";
402				regulator-always-on;
403				regulator-boot-on;
404				regulator-min-microvolt = <1800000>;
405				regulator-max-microvolt = <1800000>;
406				regulator-state-mem {
407					regulator-off-in-suspend;
408				};
409			};
410
411			vcc_3v0: LDO_REG8 {
412				regulator-name = "vcc_3v0";
413				regulator-always-on;
414				regulator-boot-on;
415				regulator-min-microvolt = <3000000>;
416				regulator-max-microvolt = <3000000>;
417				regulator-state-mem {
418					regulator-on-in-suspend;
419					regulator-suspend-microvolt = <3000000>;
420				};
421			};
422
423			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
424				regulator-name = "vcc3v3_s3";
425				regulator-always-on;
426				regulator-boot-on;
427				regulator-state-mem {
428					regulator-off-in-suspend;
429				};
430			};
431
432			vcc3v3_s0: SWITCH_REG2 {
433				regulator-name = "vcc3v3_s0";
434				regulator-always-on;
435				regulator-boot-on;
436				regulator-state-mem {
437					regulator-off-in-suspend;
438				};
439			};
440		};
441	};
442
443	vdd_cpu_b: regulator@40 {
444		compatible = "silergy,syr827";
445		reg = <0x40>;
446		fcs,suspend-voltage-selector = <1>;
447		pinctrl-names = "default";
448		pinctrl-0 = <&vsel1_pin>;
449		regulator-name = "vdd_cpu_b";
450		regulator-min-microvolt = <712500>;
451		regulator-max-microvolt = <1500000>;
452		regulator-ramp-delay = <1000>;
453		regulator-always-on;
454		regulator-boot-on;
455		vin-supply = <&vcc5v0_sys>;
456
457		regulator-state-mem {
458			regulator-off-in-suspend;
459		};
460	};
461
462	vdd_gpu: regulator@41 {
463		compatible = "silergy,syr828";
464		reg = <0x41>;
465		fcs,suspend-voltage-selector = <1>;
466		pinctrl-names = "default";
467		pinctrl-0 = <&vsel2_pin>;
468		regulator-name = "vdd_gpu";
469		regulator-min-microvolt = <712500>;
470		regulator-max-microvolt = <1500000>;
471		regulator-ramp-delay = <1000>;
472		regulator-always-on;
473		regulator-boot-on;
474		vin-supply = <&vcc5v0_sys>;
475
476		regulator-state-mem {
477			regulator-off-in-suspend;
478		};
479	};
480};
481
482&i2c1 {
483	i2c-scl-rising-time-ns = <300>;
484	i2c-scl-falling-time-ns = <15>;
485	status = "okay";
486};
487
488&i2c3 {
489	i2c-scl-rising-time-ns = <450>;
490	i2c-scl-falling-time-ns = <15>;
491	status = "okay";
492};
493
494&i2c4 {
495	i2c-scl-rising-time-ns = <600>;
496	i2c-scl-falling-time-ns = <20>;
497	status = "okay";
498
499	fusb0: typec-portc@22 {
500		compatible = "fcs,fusb302";
501		reg = <0x22>;
502		interrupt-parent = <&gpio1>;
503		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
504		pinctrl-names = "default";
505		pinctrl-0 = <&fusb0_int>;
506		vbus-supply = <&vcc5v0_typec>;
507		status = "okay";
508	};
509};
510
511&i2s0 {
512	rockchip,playback-channels = <8>;
513	rockchip,capture-channels = <8>;
514	status = "okay";
515};
516
517&i2s1 {
518	rockchip,playback-channels = <2>;
519	rockchip,capture-channels = <2>;
520	status = "okay";
521
522	i2s1_p0: port {
523		i2s1_p0_0: endpoint {
524			dai-format = "i2s";
525			mclk-fs = <256>;
526			remote-endpoint = <&es8316_p0_0>;
527		};
528	};
529};
530
531&i2s2 {
532	status = "okay";
533};
534
535&io_domains {
536	status = "okay";
537
538	bt656-supply = <&vcc1v8_dvp>;
539	audio-supply = <&vcc_3v0>;
540	sdmmc-supply = <&vcc_sdio>;
541	gpio1830-supply = <&vcc_3v0>;
542};
543
544&pcie0 {
545	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
546	num-lanes = <4>;
547	pinctrl-names = "default";
548	pinctrl-0 = <&pcie_perst>;
549	vpcie12v-supply = <&vcc12v_dcin>;
550	vpcie3v3-supply = <&vcc3v3_pcie>;
551	status = "okay";
552};
553
554&pcie_phy {
555	status = "okay";
556};
557
558&pmu_io_domains {
559	pmu1830-supply = <&vcc_3v0>;
560	status = "okay";
561};
562
563&pinctrl {
564	bt {
565		bt_enable_h: bt-enable-h {
566			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
567		};
568
569		bt_host_wake_l: bt-host-wake-l {
570			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
571		};
572
573		bt_wake_l: bt-wake-l {
574			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
575		};
576	};
577
578	buttons {
579		pwrbtn: pwrbtn {
580			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
581		};
582	};
583
584	fusb302x {
585		fusb0_int: fusb0-int {
586			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
587		};
588	};
589
590	leds {
591		work_led_pin: work-led-pin {
592			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
593		};
594
595		diy_led_pin: diy-led-pin {
596			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
597		};
598	};
599
600	pcie {
601		pcie_perst: pcie-perst {
602			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
603		};
604
605		pcie_pwr_en: pcie-pwr-en {
606			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
607		};
608	};
609
610	pmic {
611		pmic_int_l: pmic-int-l {
612			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
613		};
614
615		vsel1_pin: vsel1-pin {
616			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
617		};
618
619		vsel2_pin: vsel2-pin {
620			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
621		};
622	};
623
624	sdcard {
625		sdmmc0_pwr_h: sdmmc0-pwr-h {
626			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
627		};
628
629	};
630
631	sdio-pwrseq {
632		wifi_enable_h: wifi-enable-h {
633			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
634		};
635	};
636
637	usb-typec {
638		vcc5v0_typec_en: vcc5v0_typec_en {
639			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
640		};
641	};
642
643	usb2 {
644		vcc5v0_host_en: vcc5v0-host-en {
645			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
646		};
647	};
648};
649
650&pwm0 {
651	status = "okay";
652};
653
654&pwm1 {
655	status = "okay";
656};
657
658&pwm2 {
659	status = "okay";
660};
661
662&saradc {
663	vref-supply = <&vcca1v8_s3>;
664	status = "okay";
665};
666
667&sdio0 {
668	bus-width = <4>;
669	cap-sd-highspeed;
670	cap-sdio-irq;
671	disable-wp;
672	keep-power-in-suspend;
673	mmc-pwrseq = <&sdio_pwrseq>;
674	non-removable;
675	pinctrl-names = "default";
676	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
677	sd-uhs-sdr104;
678	status = "okay";
679};
680
681&sdmmc {
682	bus-width = <4>;
683	cap-sd-highspeed;
684	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
685	disable-wp;
686	max-frequency = <150000000>;
687	pinctrl-names = "default";
688	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
689	vmmc-supply = <&vcc3v0_sd>;
690	vqmmc-supply = <&vcc_sdio>;
691	status = "okay";
692};
693
694&sdhci {
695	bus-width = <8>;
696	mmc-hs200-1_8v;
697	non-removable;
698	status = "okay";
699};
700
701&spi1 {
702	status = "okay";
703
704	flash@0 {
705		compatible = "jedec,spi-nor";
706		reg = <0>;
707		spi-max-frequency = <10000000>;
708	};
709};
710
711&tcphy0 {
712	status = "okay";
713};
714
715&tcphy1 {
716	status = "okay";
717};
718
719&tsadc {
720	/* tshut mode 0:CRU 1:GPIO */
721	rockchip,hw-tshut-mode = <1>;
722	/* tshut polarity 0:LOW 1:HIGH */
723	rockchip,hw-tshut-polarity = <1>;
724	status = "okay";
725};
726
727&u2phy0 {
728	status = "okay";
729
730	u2phy0_otg: otg-port {
731		status = "okay";
732	};
733
734	u2phy0_host: host-port {
735		phy-supply = <&vcc5v0_host>;
736		status = "okay";
737	};
738};
739
740&u2phy1 {
741	status = "okay";
742
743	u2phy1_otg: otg-port {
744		status = "okay";
745	};
746
747	u2phy1_host: host-port {
748		phy-supply = <&vcc5v0_host>;
749		status = "okay";
750	};
751};
752
753&uart0 {
754	pinctrl-names = "default";
755	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
756	status = "okay";
757
758	bluetooth {
759		compatible = "brcm,bcm43438-bt";
760		clocks = <&rk808 1>;
761		clock-names = "lpo";
762		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
763		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
764		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
765		pinctrl-names = "default";
766		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
767		vbat-supply = <&vcc3v3_sys>;
768		vddio-supply = <&vcc_1v8>;
769	};
770};
771
772&uart2 {
773	status = "okay";
774};
775
776&usb_host0_ehci {
777	status = "okay";
778};
779
780&usb_host0_ohci {
781	status = "okay";
782};
783
784&usb_host1_ehci {
785	status = "okay";
786};
787
788&usb_host1_ohci {
789	status = "okay";
790};
791
792&usbdrd3_0 {
793	status = "okay";
794};
795
796&usbdrd_dwc3_0 {
797	status = "okay";
798	dr_mode = "host";
799};
800
801&usbdrd3_1 {
802	status = "okay";
803};
804
805&usbdrd_dwc3_1 {
806	status = "okay";
807	dr_mode = "host";
808};
809
810&vopb {
811	status = "okay";
812};
813
814&vopb_mmu {
815	status = "okay";
816};
817
818&vopl {
819	status = "okay";
820};
821
822&vopl_mmu {
823	status = "okay";
824};
825